Going mad w/error-21 and -20! Need help?

Needle in a Haystack? I can communicate w/video with 2 of 3 apple's test sites but not #02. Have office in Indy same as #02, but communication great with one of Ralph's recommends in Germany. Got me baffled. If I send I get a -21 if I recieve I get -20.
Intel 2.16, 2meg, D-link 808HV, T1   Mac OS X (10.4.10)   LAN 6 Intel macs. Have DI-808HV with lates firmware, UPnP enabled. Have tried port settings recommended by d-link with no results. Reset router to default. Hooked up to NAT with firewall off. No dog to kick!

Ralph/Others,
A partial error message below. I have found a crazy work-around. That may give a knowlegeable person some insight. Apple has 3 test sites. I can recieve video from #1 and #3. #2 gives me the error below. But if I intiate #1or #3 first then I can have #2 join. At that time I can end with #1 or #3 and continue with #2. Does that make sense? I have tried that with other working and non working sites with the same success. I have a Cisco IAD2400 with all ports open that handles our data services to a D-Link 808HV with all the port settings that support has given me. With or without the settings from D-Link, I'm getting the same results. Thanks for any help.
Date/Time: 2007-07-16 18:16:46.864 -0400
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
iChat Connection Log:
AVChat started with ID 2698223988.
dylan214u1: State change from AVChatNoState to AVChatStateWaiting.
0xdbe3830: State change from AVChatNoState to AVChatStateInvited.
0xdbe3830: State change from AVChatStateInvited to AVChatStateConnecting.
dylan214u1: State change from AVChatStateWaiting to AVChatStateConnecting.
0xdbe3830: State change from AVChatStateConnecting to AVChatStateConnected.
dylan214u1: State change from AVChatStateConnecting to AVChatStateConnected.
dylan214u1: State change from AVChatStateConnected to AVChatStateEnded.
Chat ended with error -21
0xdbe3830: State change from AVChatStateConnected to AVChatStateEnded.
Chat ended with error -21

Similar Messages

  • Help IP restore error 21 (DFU ) running DFU  and error 1600. I need help

    I restore error 21 ( DFU ) >>> running DFU and error 1600. >>> I need help ?

    ip 4, 32g is me. I running FW up ios 6.0 >> error 21 ( DFU ) >>  mode DFU  >>>> error 1600 ( recovery mode )

  • Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

    Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200.
    These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    I would guess your iphone has been hacked ( jailbroken ) ring any bells ?

  • Adobe Flash Player slow, jerky, and I NEED HELP A.S.A.P.

    Hello everybody, and how are you all doing on this wonderful Friday?
    Today after doing research on the support website for Adobe ShockWave flash player, I'm here as a last resourt.
    Allow me to explain the issue!
    WARNING:
    THIS IS GOING TO BE EXTREMELY LONG, BUT I NEED HELP VERY VERY BADLY!!
    I've waisted people's time because of this issue.
    I'm using an HP Windows 7 Laptop with latest version of Windows 7!
    I have Adobe ShockWave 11.7 the LATEST VERSION and It is a great program.
    However in one of my simulators which is a V500  Evita Ventilator simulator from the company Drager, the performance is HORRID, and when I say horrid, I mean HORRID TIMES 30 and then some.
    Keep in mind that this has been tested by the company on other computers, and it works just fine, however on mine the waveforms and data is choppy, slow and what it will do is it will be working smoothly one second, the next second It lags and then catches up, then lags again, and It basically drags along miserably. I used this program online and then when I contacted Drager the owners of the simulator, they thought I get a DVD of the simulator. THEY GAVE IT TO ME FREE OF CHARGE. I got it, and It was still slow and Jerky. I had used Google Chrome to use the simulator online HOWEVER, when I used the DVD, It was still slow. I have a LOAD of computer space, and have tried uninstalling Adobe Shockwave, Reinstalling it, then doing that several times. NOTHING. NOW WHAT??
    I'm desperate right now. When I say DESPERATE, THIS HAS GOT TO BE FIXED AS SOON AS POSSIBLY POSSIBLE.
    ASAPP!!!!!!!!!!!!!!!
    Is there some setting I can adjust?
    Or SOMETHING???
    The thing is other things that require Adobe Shockwave work just fine. I use a lot of simulators.
    Its just this simulator.
    PLEASE RESPOND!!
    THANK YOU, and God bless.

    Ask on a forum for the Flash Player - this one is for Director's Shockwave Player

  • I am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to

    i am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to turn off the computer and there was no case

    i am john and I need your help yesterday bought a program called DJAY when I finish the download and got an error opened and I saw him there was no case to install and thank you for your help anyway

  • Recent wipe of Mac HD.     Reinstall won't allow CS5 .  Quote error 213.5. Need Help

    I recently had my Mac software reinstalled but Adobe Photoshop will not reinstall siting error 213.5.  Need help.

    Hi Nicintime101,
    Please go through the forum link below and  check.
    https://forums.adobe.com/thread/1256895?tstart=0
    Regards,
    Anand

  • When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."  I have Windows XP and I need help.

    5, it says, "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."  I have Windows XP and I need help.

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

  • My daughters IPod was stolen and I need help trying to locate it?

    And I dont know how to do this and really need help

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                                        
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

    I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

    Check this thread where people have already given their suggestion on learning SSIS
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f2cc1cf3-204d-454a-a189-47df87a3aa23/i-want-to-learn-ssis?forum=sqlintegrationservices
    I would suggest to go for You tube videos (type learn SSIS or begin SSIS step by step) you will get lot of good tutorials to start with.
    Happy Learning!!
    If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

  • In testing 9 and X, "Compare Docs" we have a critical issue and really need help!

    For years we have used Acrobat 7 to do PDF compares and we love it!  However, the company recently advised we must upgrade to 9 and then eventually to X.  In testing 9 and X, Compare Docs we have a critical issue and really need help.  Our PDFs are produced by IT in a batch process and one of our main, critical functions is to compare previous PDFs to current PDFs;  however, in using 9 the Compare screen automatically sets the Doc Description for our PDFs to "Scanned Doc" and does not produce any differences! If you try to change the setting to Reports --it totally shuts down both documents without running!  Version 7 runs the compare of the same PDFs  beautifully, pointing out all the differences, as usual!  Has this every happen to anyone?  Do you know what we can do to our PDFs to allow version 9 to do the compare and produce results?  Why is 9 treating these non-scanned PDF docs as such?  Thanks so much for any help or insight you can give me on this issue! 

    (Moved the discussion to the correct forum)

  • I have a PC and a need help to configure my external hard disk on my network. Thanks

    I have a PC and a need help to configure my external hard disk on my network. Thanks

    If you mean you wish to plug a USB drive into the Airport Extreme router (or TC not express) that is easy..
    The disk must be formatted FAT32.. as if.. stay away from FAT .. or HFS+ ie Mac OS extended Journaled.
    Format the disk on a Mac is best.. and even use GUID partition scheme not MBR.
    The PC has no issue writing and reading files because this is a network drive.. The PC does not write to the drive.. it writes files to the Airport OS which writes and reads the disk and passes the info using standard windows SMB.. To the windows computer it will be a Windows NT server.. FAT32 setup.
    If your setup is different.. to my hugely guessed assumptions.. give details.. always helps to have.. make and model.
    Make and model of disk.. make and model of router.. how the setup will be done.. what windows OS you run.. etc etc.
    As it stands your question could have nothing to do with apple at all.. other than you posted in a forum so I guess there is something apple in there somewhere.

  • I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

  • My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10.  This is wrong and I need help getting past this situation. Help!

    My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10.  This is wrong and I need help getting past this situation. Help!

    Sure, you can get around it if you don't need the newest version of iTunes. I still use version 7.5 because the newer versions didn't strike me as offering anything I needed.
    If you do need a version 10-something then you will have to upgrade your operating system to Leopard (fi your computer will support it) at least.  If you need 10.5 for some reason then there's no getting around it, you will have to buy a new computer.

  • This morning i tried to restore my ipod and it said:"the ipod "ipod cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavalible." i have no idea what to do and i need help

    this morning i tried to restore my ipod and it said:"the ipod "ipod cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavalible." i have no idea what to do and i need help.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • My grandma is a new apple user and she needs help making an apple account.

    my grandma is a new apple user and she needs help making an apple account.

    She should call Apple support or visit the Genius Bar at an Apple store (make an appointment first at http://apple.com/retail). They will walk her through the process.

Maybe you are looking for