Going Nutz with my Epson 2200 and Missing icc profie. Pls help

Thanks for looking.
Had to reinstall my driver for my epson 2200 and now when I go to print and select the proper paper "luster" I cannot find the selection.
I've downloaded the profile again from epson, installed and still cannot select it for printing in Photoshop CS2. I can see the profile in my colorsync libs but not in my PS print dialog.
Please help.
Thanks!

I am also having a problem with all the premium papers no longer available as selections in the printer settings portion of the epson printer driver dialogue box. I have three of these printers in a lab and noticed that it happened after replacing some of the empty cartridges. I have also noticed that the packaging of the Epson cartriges has changed and and it seems to have happened after using the newly packaged ink cartridges (all the info on the packages is the same except the new boxes are narrower).
Anyone else have this problem and know how to fix it?

Similar Messages

Beating a dead horse...Need help with my Epson 2200

I realize there are many posts on this topic, but I'm still having problems with my Epson 2200/firewire (running on Tiger). I had to buy a new hard drive the other day, so I reinstalled Tiger. I can get the Printer Utility to recognize my 2200, but my option to print borderless is gone. Nothing I try works. I deleted the drivers and reinstalled them. I've tried the drivers that came with Tiger and those that are found on the Epson site. My R200 has the borderless option, but not the 2200. I had the borderless option before I installed the new HD, so I know I got it to work before. I just can't remember how.
If anyone can help me, I would appreciate it very much. I'm slowy going insane. Thanks!
Brian

I do seem to recall that there have been a lot of problems with printers with Firewire connections. As to you Epson 2200, I would agree that it appears the printer is not being recognized properly. I believe that Printer Setup Utility gets the printer identification from what is called the CUPS "backend". This is the software that normally acts as communications software between the printer and the computer -- at least during printer setup. The backends are located in an invisible directory. You can see them by using the Finder's "Go to Folder" command under the Go menu. In the box that appears enter --
/usr/libexec/cups/backend
and click "Go".
If you feel you must use the Firewire connection on this printer, you could try the following. There are no guarantees that it will solve your problem. You could try manually installing a new copy of the Firewire backend from your Tiger installation disk. You would need to use a program called Pacifist. The procedure would be to first locate the file on the Tiger disk at /System/Installation/Packages/Essentials.pkg. Once you have made sure you found the file to install, then you could use the Finder to manually delete that file on your hard drive followed by using Pacifist to install a new copy of the file. I would then recommend restarting your computer. Hopefully the fresh file would see your printer correctly, but again there are no guarantees.
In looking for information on this printer I did find out that this printer normally appears as a SCSI device on Linux system. I found this on the Epson FAQ page. This would seem to indicate that it might not be a standard Firewire port. The standard suggestion that I kept running into was to use the USB port. It is generally felt that you would not loose much speed as the processing on the computer is CPU intensive enough to negate much of the Firewire speed.
I wish I could offer you a better solution. Perhaps others that have this printer have gotten it to work via Firewire and could offer more insight.
Matt
Mac Mini G4; B&W G3/300

Problem with color Epson 2200 on Tiger, Photoshop 7

I'm running Photoshop 7 on an iMac G4, 768 mb RAM, with an Epson 2200 printer. I've been using the same color management system with good results for 3 years. I hooked up an Epson R200 to print CD covers, and it caused my 2200 driver to crash. I reinstalled the driver, and now all my ICC profiles are messed up.
I've reinstalled the driver from the original disk, the updated driver from Epson, and the new ICC profiles from Epson. I'm getting a serious magenta cast on all of these, including ICC profiles I tried downloading from Ilford. I've contacted Epson, but all they told me was how to install the drivers, which I already knew. I responded back to them with a detailed description of the problem, but they never responded. I also took another Mac with Tiger and still have the same problem. I suspect that even though I've got color management turned off, the new Epson drivers are ignoring it and color processing anyway.
Does anyone have a solution to this problem?

Magenta cast sounds like double color management.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Contact facebook to address the facebook issues.

What is going on with CBS Channel 2 and 502

What is going on with CBS Channel 2 and 502? The audio went out mid-day. When it came back the picture is now a postage stamp? I called and was told Verizon is having trouble with CBS. It is now 9 hours latter and the picture is still a postge stamp? (5.1 AC3 digital )
Any fix soon?
Thanks

You didn't identify where you are. Channel 502 (WCBS in NY) was fine when I checked in VHO 5.
Also did you try a STB In-home-agent fix, set top box auto correct?

What's going on with the iTunes Store and the App Store this AM?

What's Going on with the iTunes Store and the App Store this morning? 3/11/2015

As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/
Edit

What's going on with safari on ipad and iphone not connecting?

What's going on with safari on ipad and iphone not connecting?

I am using safari on my iPad to respond here. What problems are you having? Do you have a good wifi connection? Try a reset, hold the power button and home button until you see the apple then let go.

I recently updated my iPad and when I went back to read a book that I had purchased now I'm getting an error message where whole chapters are missing. I tried re-syncing with my mac book and no luck. Any help to restore my book?

I recently updated my iPad and when I went back to read a book that I had purchased I'm getting error messages and whole chapters are missing. I tried re-syncing with my mac book and nothing changed. Any help to restore my book completely?

Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, you'll need to do a time-consuming "Restore."

My mac starts up in a white screen with a loading bar and a loading circle please help

My mac starts up in a white screen with a loading bar and a loading circle please help

I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed: OS X: About OS X Recovery - Apple Support

In the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??

in the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??

Unknown "source"? Do you mean unknown "error" followed by a number?
http://support.apple.com/kb/TS3221
Follow the instructions in the article. When you connect your phone again, you may have to press both the home and sleep/wake buttons until the Apple logo reappears, then continue pressing the home button until iTunes detects the phone in recovery mode.

Have installed MacOsX Lion has trouble hooking up to my StoraNas server with my usual username and password, some who can help me?

Have installed MacOsX Lion has trouble hooking up to my StoraNas server with my usual username and password, some who can help me?

This is a common problam discussed on the Netgear forums. I have yet to see a solution, just comments that there will need to be a fix from Netgear. if anyone has heard of a solution or of the update being issued, please let us know.

I have a problem with my macbook after i pressed the power button the screen turns blue and nothing is happening with it! What can I do? Pls helps and thx btw

I have a problem with my MacBook Pro, I pressed the power button and after that the apple noise came and the screen turned blue. What can I do and what happened? pls help & thx btw

You may find this helpful:
http://support.apple.com/kb/PH14061
Ciao.

When I try to update my macbook air to the new OS X Maverick it say unknown error and to please try again later. This has been going on for a few days and was hoping someone can help. Thanks.

When I try to update my macbook air to the new OS X Maverick it say unknown error and to please try again later. This has been going on for a few days and was hoping someone can help. Thanks.

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

What version of iPhoto?
Can you access the images with Image Capture (in your Applications Folder) ?

I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

If there are fonts, transitions, builds, video or audio in the PowerPoint file that are not compatible with Keynote, it will either prevent the presentation opening or Keynote will substitute the settings causing playback changes.
I use Open Office to play and open any PowerPoint files sent to me, they play exactly as in PowerPoint.
Open Office is free, you can download it here:
Open Office for Mac

Going Nutz with my Epson 2200 and Missing icc profie. Pls help

Similar Messages

Maybe you are looking for