Going through words separately to background video

I don't know if this is the right place to post this but here goes.
I'm fairly new to encore
I have a video (a sequence of moving pictures and a soundtrack) and i have some words that I would like to accompany the video with.
What i want to know is - is it possible to have the video constantly running in the background while the words change when a button on the remote (say enter) is pressed. Ideally the words would appear for a specified amount of time and then disappear again and then the next sentence would appear and then disappear again one a button on the remote is pressed again. Or an alternative solution would be for the words to change to the next sentence every time a button on the remote is pressed. (Although my first solution would be more desirable but understandably more difficult to do).
Are either of the above solutions possible and if so how can they be achieved.
Remember i am fairly new so please explain in depth - and also any tutorials which solve simular problems (I don't mind paying for them but obviously would prefer free ones) would be greatly appreciated.

Hey!!
You can always try to close the Application via Multitasking...
http://support.apple.com/kb/HT4211
If you close all applications and re-open the video you should return to your video library, if you watch a video and it does the exact same thing... You'll then be having a software issue and then you will have to restore the iPad to factory settings
http://support.apple.com/kb/ht1414
These articles will help you resolve you issue.. If after following those articles and you still cannot do that.. Contact AppleCare Phone Support.

Similar Messages

How can I fade in menus with background video?

Hi there,
I'm new to this forum (and to DVD SP) and have searched without being able to find out how to get my menus to work in this scenario:
I have a short (6s) background video that does not loop and ends on a still frame.
There are two drop zones, both with semi-transparent areas so that I can see the video play underneath. One drop zone has my title (as text in DVD SP) and the other has my "play" button.
I want my video to play for 5s and then have all the other elements fade in over the last second.
Here's what I've tried (thanks to suggestions from here and dvdstudiopro.digitalmedianet.com--which uses js that really bogs down Firefox, BTW):
A. I created a custom patch using PS that's a 6s .mov file that's simply a black mask that fades to white.-->this causes my drop zones (which are layered psd files with a mask of their own) to fade up, BUT the custom patch overrides the drop zone mask and causes the drop zone to become completely opaque.
B. I tried separating the background video and menus into separate menus in DVD SP. The first menu plays the video, then jump to the second menu which contains the last frame of the video as a still with the drop zones and button on top.-->this works but there is a noticable delay going from menu 1 to menu 2 and it looks horrible.
C. I created a 6s .mov file in FCP that does exactly what I want, but when I bring it into DVD SP, the quality suffers.-->I exported without compression from FCP and with, same bad results (especially in text).
Is there a way for me to get this to work gracefully?
I put a still of my menu with callouts at this url if it helps:
http://infactfilms.com/dvdmenu/
Thanks very much and I appreciate the wealth of info in this forum.
Cheers!
misho

Hi
Read this note about Menu rendering in DVDSP:
If you edit all your elements in FCP, adding the graphic fade in/outs, texts, etc and then export it directly with Compressor to MPEG2, and use that file/s as Menu backgrounds, DVDSP will not re-encode these menus.
If you add in DVDSP text, graphic for buttons, drop zones, etc it will need to render and encode the background again to add those graphics.
Take care of what video format you choose in FCP for your background edit. DV codec works really bad with graphic elements; you better choose DVCPRO50 sequence settings and export directly from FCP through Compressor. That way FCP will use the raw info from each frame and not the render files as if you export as Quicktime Movie.
Hope that helps !
Alberto

Can I take a video on my iPad 2 while the device is going through the X ray at the airport?

I want to take a video with my ipad while it goes through the X ray at the airport. Is that going to damage my iPad? Do I have to turn it on? I'm working on a video and I though that it could be a nice idea for an scene to have that shot.

You would have to turn the iPad On. Don't believe it would hurt the iPad. The only problem might be that you would be setting the exposure in the lighted area & the Xray machine is probably dark inside.
But I would ask one of the TSA persons first. They might not allow it. They might not like the blinking red light.
 Cheers, Tom

How do I stop my cursor from selecting things on the page? It shows up like I want to type something and when I press the down key it goes through all the words like its a word document.

How do I stop my cursor from selecting things on the page? It shows up like I want to type something and when I press the down key it goes through all the words like its a word document.
== This happened ==
Every time Firefox opened
== June 27, 2010

You have '''caret browsing''' enabled - that preference appears as set in your Troubleshooting Information.
http://kb.mozillazine.org/Accessibility.browsewithcaret
Hit the '''F7''' key to disable '''''caret browsing'''''.

After startup, my desktop rushes through all the pictures if goes through and I can't load/see any apps until it stops. What to do?

When I turn on my macbook pro (end of 2010 so it isn't old), I wait for the usual things it needs to run through, and before my icons etc load up (the ones on the desktop), my screen rushes through all the images I have told it to rotate through as a desktop screen (I have alternating backgrounds that are supposed to change every 5 minutes or so). It is the second time it has happened now (2nd startup) and it has been fine for the past few months from when I bought it in December. While it goes mental and rushes through the photos, it can't go to the bottom to bring up the Apps bar so it is virtually useless (unresponsive) when it goes through this mad stage. I recently deleted a chunk of video I transferred off an old camera onto the Mac but I can't see how this would have messed up a £1,000 machine 0-O Please let me know what has happened because I don't want to have to call Apple again =(
-Jack

Thanks for the quick advice!
Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
Here's the error log after the restart:
What else should I try?

Menu problems - changing background video length to fit audio

Hi,
I've been struggling for hours (feels like weeks!) trying to adjust the background video length to match the audio length on my encore menu to prevent the white screen appearing once the background video has finished.
Having read through some previous questions on here I see the general advice is to adjust the audio length to match the video length but is there really no way of doing it the other way around?
I tried editing the background video in premier pro, and managed to do that effectively so it was identical in length to the audio track, however then I couldn't work out how to export it back into encore so it would use it as a menu.
I'm still getting to grips with all the software so any help would be greatly appreciated!
Thank you!!
Liz

Hi jsbman,
Thanks for your reply, I'm not sure I was totally clear about what I am trying to do. Basically I have a menu image with background video that currently runs on a loop of 16 seconds, and I have an audio file (song) that lasts 3 minutes and also loops. I can put the audio on the menu fine as long as I have menu with no background video but if I try and have both it runs but then goes to a white menu screen after the 16 second loop while the audio continues to the end.
I understand from what I have read that the audio track and video background need to be the same length (I guess so they can loop together or something) and to edit the audio track down to 16 seconds makes it pretty pointless in using. This is why I have been trying to increase the background video to the same length as the audio track. They will then both loop until play is pressed on the remote for the DVD to start.
I forgot to say in my original post I am using CS4, with Windows 7 - I'm not sure if that makes a difference.
Any ideas welcome!
Thanks
Liz

I transferred my iTunes library from one external hard drive to another and added more music on the same day. How do I get rid of my duplicate files without going through them one by one which would take forever?

Please help. I have transferred my iTunes library from one external hard drive to another plus added additional music now I have duplicates of the same music in many albums. How do I delete the duplicates without going through them one by one which would take forever? I understand how to get the "show exact duplicate" feature up on iTunes but, because they were added to the library on the exact day I can't seperate them I'm that manner. So each duplicate is right next to eachother in the exact duplicate screen.

My DeDuper script is designed to help clean up. See this thread for background.
tt2

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

Why are my audiobooks not going through home sharing?

why are my audiobooks not going through for home sharing.

According to this thread (https://discussions.apple.com/thread/3525692), it looks like you are not able to share audiobooks through Home Sharing:
You can share MP3, AIFF, WAV, AAC, and radio station links, but you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files.
You can leave iTunes feedback here: http://www.apple.com/feedback/itunesapp.html

Using axbridge.dll without going through the JRE installation process

I've searched the web and this forum for this specific problem, and have found related items, but nothing that quite answers the question.
I have an application that uses the JRE's axbridge.dll to access a DLL created from a Java bean. I used the packager to create a DLL named MyBean.dll.
When I go through the full JRE install, everything works great. That is to say, when I execute Sun's JRE installation program and go through the normal install process, I can access the bean through MyBean.dll without any problems.
I am accessing MyBean.dll from a Visual Basic 6.0 application. Converting to VB .Net is NOT an option at this time. The VB app uses MyBean.dll for a critical part of the application.
It is my understanding that it is not strictly necessary to go through the full JRE installation process. Simply deploying the JRE by copying its directory (and all subdirectories) to your application's directory structure should be sufficient. This would be HIGHLY desirable for my application. In fact, if I can't do this, it may be a show-stopper.
When I install my application in this way (i.e, by simply copying the JRE instead of "installing" it) it doesn't work at all. I immediately get an error saying that the executable "has encountered a problem and needs to close. We are sorry for the inconvenience" and a dialog is displayed offering to send the problem information to Microsoft.
The details indicate clearly that the problem occurs in the axbridge.dll, version 1.4.2.60.
1. Any ideas on how to get the axbridge.dll to work without going through the full JRE install?
2. Are there any alternatives to using the axbridge.dll to get my VB app to be able to use the Java? Remember, it is VB that must call the Java, NOT the other way around.
3. Is JNI an alternative? If so, can I use JNI to get VB to use Java, or do I have to write the DLL's in C++?
Any help you can give would be VERY MUCH appreciated.

I'm also on a JRE installation problem with the bridge.
Here is a regmon extract on excel using a dll that uses a java-packaged dll from the bridge:
5229 5.69504923 EXCEL.EXE:2364 QueryValue HKCR\CLSID\{9DD49FCD-BB61-414E-88C8-E6F5B35AEDCB}\InprocServer32\(Default) SUCCESS "C:\win32app\Specific\jre1.5.0_05\bin\axbridge.dll" << The axbridge dll in a specific location
5271 5.70646800 EXCEL.EXE:2364 QueryValue HKLM\SOFTWARE\JavaSoft\Java Plug-in\1.5.0_05\JavaHome SUCCESS "C:\Program Files\Java\jre1.5.0_05" << an installed JRE 1.5.0
This is confirmed with process explorer : excel is using "C:\Program Files\Java\jre1.5.0_05\lib\rt.jar" and not "C:\win32app\Specific\jre1.5.0_05\lib\rt.jar"
In other word, the axbridge check for its installation location in the registry to know where to start.
Even if all your components have been updated in the registry as suggested here : http://forum.java.sun.com/thread.jspa?forumID=40&threadID=559704
JRE Bug or feature?
Anyway the registry is evil.

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.

Jeremy.Laurin,
have you tried agb76’s approach here?

Does anyone screen freeze and have white lines going through it

My screen seems to freeze and have white lines going through it like its defective. It happen about 6 times already today.

Hi,
To do the PRAM reset, just click on the highlighted words in my last post, it will take you to an Apple Support page which tells you how to do it. No, it will not delete anything.
If you have only had it 10 months, it is under the standard 1-year warranty.
To make an appointment with the Genius Bar, visit this site. If you are not in the United States, choose your region from the pulldown menu on the right.
By the way, that PRAM link is for Yosemite. If you have Mavericks, go here.

My iPhone has white lines going through half the screen and is locked. Is this a glItch or is it dead

My iPhone has white lines going through half the screen and is locked. Is this a glItch or is it dead

Hey there Yodude52,
it sounds like you've got some unexpected graphical issues on your phone. This article provides details and tips that should help you get it sorted.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Pay close attention to these sections
Display image issues
This can include bright or dark pixels, lines in video, or sections of video missing.
1.Try turning iPhone off and then on again.
2.Verify the issue is not content related, by viewing different content.
3.If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thank you for using Apple Support Communities.
Regards,
Sterling

For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.

For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

HT1386 every time I try to sync my phone and restore my content after I updated my iPhone, iTunes goes through the prompts and then says "cancelling sync" at step 5. I cannot restore my apps or music!

every time I try to sync my phone and restore my content after I updated my iPhone, iTunes goes through the prompts and then says "cancelling sync" at step 5. I cannot restore my apps or music!

when i try to sync my music which i have on my PC's itunes it will just not transfere on the phone. everything will sync [apps, videos, contacts] but the music will just not transfere.
and when i try to download the music from the phone's itunes store it will say "Error. Tap again to retry".
Thera are no more details i have! i have no idea why the songs will not sync and will not download!

Going through words separately to background video

Similar Messages

Maybe you are looking for