Going to china,a question about re charging and volt
hi there
i've got a zen xtra, and i'm going to china i'm from canada, am i going to need to get a voltage convertor not a plug adapter i've got one of those, the support staff told me that my player SHOULD take the voltage, any info would be great because i would really hate to plug my player in and have it explode.
thank you
When I had been to India, I just needed the plug adapter, since the voltage ratings were 230V/50 Hz -- well within my power adapter ratings range. If the voltage rating of China lies in the range of ur adapter, then u wouldn't need a voltage converter.
Similar Messages
-
Question About Color's and Gradients
Hi all,
I have a question about color swatches and gradients.
I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.If you double click your gradient swatch (after adding it to the swatches)
Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
And you can alter the percentages there. It's not much use for spot colours but it's a start.
But making tint swatches would be a good start anyway.
At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking. -
Hi my I phone has just gone dead it has about 50% charge and wont turn on. It dont seem to take a charge either?
Any ideas my whole business revolves around this bloody thing with out it I am *********
Can some one help please??Hello, gypsumspring.
Thank you for visiting Apple Support Communities.
Here are the best resources to go through when experiencing this issue.
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
Jason H. -
Question about clear page and reset pagination
Hi,
I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
Thanks for your input.
Patrick
*** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/Enhancement request filed, thanks,
Scott -
The question about portlet customization and synchronization
I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha -
A question about item "type and release" of source system creation
Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115 Oracle Applications 11i
TLF 205 Tealeaf 2.05B
XPD 020 SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
MaggieHello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie -
A few questions about the ka790gx and dka790gx
i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?
It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just.""" -
I went to use my iPhone 5 (I had used it just minutes before) and it wouldn't work. It was about half charged and seems to have shut itself off. I tried charging it and turning it on but the screen remains completely black. What happened?
Try resetting. Hold the sleep wake button (on the top edge), and the home button (round button on the front with the white square) at the same time for 10-15 seconds. If you see the apple logo, let go. Your phone should restart. If not?
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID -
Question about iphone 3g and old ipod charger
hello
i brought an ipond nano and got fitted in my car the CONNECTS2 I-CONNECT FM CAR IPOD ADAPTOR
item number here from ebay, 380089765734
now the question i have is when i plug this into my iphone 3g, it states this connection is not suitable for chargeing ipohne, all be it, it still plays music perfect
after doing some reading i found out iphone 3g have moved the charging pins around for some strange reason
so will this do any damage to my iphone if i carry on useing it, or will there be an adaptor to convert one back to the other
thanksok brought one of these from apple, plugged it into my car and still get the same message saying this is not suitable for charging and do you want to go into plane status etc etc
anyhow it still charges fine and plays music fine
anyone else had this problem ?
will it be ok ? -
A few questions about bluetooth technology and headsets...
Alright I am new to bluetooth technology and headsets, and want to do the proper research before I buy one.
1)I have seen some have 1.2 and 2.0 technology, so what is the difference and should I only look for one that offers 2.0?
2)Do they all offer a vibrating alert?
2b)Or just those really big kinds that look like hearing aides that have that little box behind your ear?...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=2002 46049729
3) Do they all have a multi-function button, 3way, mute, volume etc?
3b) Or are some just a single button that only answers and hangs up?
4) Do any of these charge via bluetooth?
5) I've seen some bluetooths have a micro sd chip in them... what is the point of this? Can they be used like a usb storage device?
6) Can you buy those usb to mini-usb adapters for charging and data transfer (not sure what kind of data you would transfer to a headset) separate from having to buy a combo kit that comes with it?You might try Google and look for answers, these are pretty comprehensive questions regarding a broad sweep of headsets. You might get answers on a few models, or just Apple's, here.
If you click on each of the models in the link I gave you it goes into more detail about each one. -
Few questions about apex + epg and cookie blocked by IE6
Hi,
I would like to ask a few questions about apex and epg.
I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
now,
1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
then, the first question is :
Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
and,
1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
2. please review the script for me.
3. I did:
SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm XDB for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
MS-Author-Via: DAV
DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
Server: Oracle XML DB/Oracle Database
WWW-Authenticate: Basic realm="XDB"
Date: Tue, 04 Aug 2009 02:25:15 GMT
Content-Type: text/html; charset=GBK
Content-Length: 147
======================================
PL/SQL procedure successfully completed
4. I also did :
SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
HTTP response status code: 500
HTTP response reason phrase: Internal Server Error
Check if the Web site is up.
PL/SQL procedure successfully completed
SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm APEX for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
Content-Type: text/html
Content-Length: 147
WWW-Authenticate: Basic realm="APEX"
======================================
PL/SQL procedure successfully completed
my second questions is :
Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
the show_url script is as following:
CREATE OR REPLACE PROCEDURE show_url
(url IN VARCHAR2,
username IN VARCHAR2 DEFAULT NULL,
password IN VARCHAR2 DEFAULT NULL)
AS
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
name VARCHAR2(256);
value VARCHAR2(1024);
data VARCHAR2(255);
my_scheme VARCHAR2(256);
my_realm VARCHAR2(256);
my_proxy BOOLEAN;
cookies UTL_HTTP.COOKIE_TABLE;
secure VARCHAR2(1);
BEGIN
-- When going through a firewall, pass requests through this host.
-- Specify sites inside the firewall that don't need the proxy host.
-- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
-- Begin retrieving this Web page.
req := UTL_HTTP.BEGIN_REQUEST(url);
-- Identify yourself.
-- Some sites serve special pages for particular browsers.
UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
-- Specify user ID and password for pages that require them.
IF (username IS NOT NULL) THEN
UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
END IF;
-- Start receiving the HTML text.
resp := UTL_HTTP.GET_RESPONSE(req);
-- Show status codes and reason phrase of response.
DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
DBMS_OUTPUT.PUT_LINE
('HTTP response reason phrase: ' || resp.reason_phrase);
-- Look for client-side error and report it.
IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
-- Detect whether page is password protected
-- and you didn't supply the right authorization.
IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
IF (my_proxy) THEN
DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the proxy server.');
ELSE
DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the Web page.');
DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
END IF;
ELSE
DBMS_OUTPUT.PUT_LINE('Check the URL.');
END IF;
-- UTL_HTTP.END_RESPONSE(resp);
-- RETURN;
-- Look for server-side error and report it.
ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
UTL_HTTP.END_RESPONSE(resp);
RETURN;
END IF;
-- HTTP header lines contain information about cookies, character sets,
-- and other data that client and server can use to customize each
-- session.
FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
UTL_HTTP.GET_HEADER(resp, i, name, value);
DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
END LOOP;
-- Read lines until none are left and an exception is raised.
--LOOP
-- UTL_HTTP.READ_LINE(resp, value);
-- DBMS_OUTPUT.PUT_LINE(value);
--END LOOP;
UTL_HTTP.GET_COOKIES(cookies);
dbms_output.put_line('======================================');
FOR i in 1..cookies.count LOOP
IF (cookies(i).secure) THEN
secure := 'Y';
ELSE
secure := 'N';
END IF;
-- INSERT INTO my_cookies
-- VALUES (my_session_id, cookies(i).name, cookies(i).value,
-- cookies(i).domain,
-- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
dbms_output.put_line('site:'||url);
dbms_output.put_line('cookies:');
dbms_output.put_line('name:'||cookies(i).name);
dbms_output.put_line('value:'||cookies(i).value);
dbms_output.put_line('domain:'||cookies(i).domain);
dbms_output.put_line('expire:'||cookies(i).expire);
dbms_output.put_line('path:'||cookies(i).path);
dbms_output.put_line('secure:'||secure);
dbms_output.put_line('version:'||cookies(i).version);
END LOOP;
UTL_HTTP.END_RESPONSE(resp);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
UTL_HTTP.END_RESPONSE(resp);
END;
/I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer? -
Question about battery maintenance and longevity
I have a question about the efficacy of the built-in battery maintenance of the Lenovo Power Manager utility; specifically how it pertains to my W520, if that makes any difference.
With my previous laptop (an HP), any time I knew it would be parked on my desk for a week or longer, I would manually discharge the battery to about 40% and remove it to run the machine on AC power only. This proved to be an excellent practice that enabled the battery to work like new for three solid years. As soon as I stopped bothering with that, the battery life started dropping like a stone.
Lenovo's power manager offers the option to maintain the battery automatically or manually override it to maintain a charge within specific range. But I am wondering: how well this will work in the long run as compared to handling it manually? And how do the two options (automatic and manual range) compare with eachother in terms of maintaining long term?
I currently use the manual setting and keep it between 40% and 45%.I would put into manual, you have more control. Automatic follows a preset rule, which may not apply in every case or battery model.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Questions about ActiveX Bridge and SWT
Hi !
I found few weeks ago the www.reallyusefulcomputing.com site answering my question about Java & Macro of MSWord. Now I've found two steps that I am not able to overcome.
First, when I build a simple application and I have internal libraries to use, am I compelled to place the jars in the lib/ext directory of the Java Runtime Directory? I have many difficulties in placing a convenient class-path in the manifest file. Why does the application ignore the manifest string?
The second problem (and the biggest one) is that I am trying to build an SWT java-bean-application but I have problems during runtime. Is it possible to use this technology for my software or am I compelled to use AWT and SWING?
I really hope you can help me.
Thank you in advance.hi,
I have to catch events from excel sheet in my java code..events like some change in value or a click of some user defined button etc.I have written th follwoing code but it does not gives me any event.It simply opens the specified file in the excel in a seperate window.but when i click on the sheet or change some value no event is captured by my code....can ne one pls tell me how to go about it....
public class EventTry2 {
private Shell shell;
private static OleAutomation automation;
static OleControlSite controlSite;
protected static final int Activate = 0x00010130;
protected static final int BeforeDoubleClick = 0x00010601;
protected static final int BeforRightClick = 0x000105fe;
protected static final int Calculate = 0x00010117;
protected static final int Change = 0x00010609;
protected static final int Deactivate = 0x000105fa;
protected static final int FollowHyperlink = 0x000105be;
protected static final int SelectionChange = 0x00010607;
public void makeVisible()
Variant[] arguments = new Variant[1];
arguments[0]=new Variant("true");
//Visible---true
automation.setProperty(558,arguments);
//EnableEvent--true
boolean b =automation.setProperty(1212,arguments);
System.out.println(b);
public Shell open(Display display){
this.shell=new Shell(display);
this.shell.setLayout(new FillLayout());
Menu bar = new Menu(this.shell,SWT.BAR);
this.shell.setMenuBar(bar);
OleFrame frame = new OleFrame(shell,SWT.NONE);
File file= new File("C:\\Book1.xls");
try{
controlSite = new OleControlSite(frame, SWT.NONE, "Excel.Application");
this.shell.layout();
boolean a2=true;
a2=(controlSite.doVerb(OLE.OLEIVERB_SHOW|OLE.OLEIVERB_OPEN|OLE.OLEIVERB_UIACTIVATE|OLE.OLEIVERB_HIDE|OLE.OLEIVERB_PROPERTIES|OLE.OLEIVERB_INPLACEACTIVATE)== OLE.S_OK);
System.out.println("Activated::\t"+a2);
}catch(SWTException ex)
System.out.println(ex.getMessage());
return null;
automation = new OleAutomation(controlSite);
//make the application visible
makeVisible();
System.out.println("Going to create Event listener");
OleListener eventListener=new OleListener(){
public void handleEvent(OleEvent event){
System.out.println("EVENT TYPE==\t"+event.type);
switch(event.type){
case Activate:{
System.out.println("Activate Event");
case BeforeDoubleClick:{
System.out.println("BeforeDoubleClick Event");
case BeforRightClick:{
System.out.println("BeforeRightClick Event");
case Calculate:{
System.out.println("Calculate Event");
case Change:{
System.out.println("Change Event");
case Deactivate:{
System.out.println("DeActivate Event");
case FollowHyperlink:{
System.out.println("Activate Event");
case SelectionChange:{
System.out.println("Activate Event");
Variant[] arguments = event.arguments;
for(int i=0;i<arguments.length;i++)
System.out.println("@@");
arguments.dispose();
System.out.println("outside");
OleAutomation sheetAutomation=this.openFile("C:\\Book1.xls");
controlSite.addEventListener(sheetAutomation,Activate,eventListener);
controlSite.addEventListener(sheetAutomation,BeforeDoubleClick,eventListener);
controlSite.addEventListener(sheetAutomation,BeforRightClick,eventListener);
controlSite.addEventListener(sheetAutomation,Calculate,eventListener);
controlSite.addEventListener(sheetAutomation,Change,eventListener);
controlSite.addEventListener(sheetAutomation,Deactivate,eventListener);
controlSite.addEventListener(sheetAutomation,FollowHyperlink,eventListener);
controlSite.addEventListener(sheetAutomation,SelectionChange,eventListener);
shell.open();
return shell;
public OleAutomation openFile(String fileName)
Variant workbooks = automation.getProperty(0x0000023c);//get User Defined Workbooks
Variant[] arguments = new Variant[1];
arguments[0]= new Variant(fileName);
System.out.println("workbooks::\t"+workbooks);
IDispatch p1=workbooks.getDispatch();
int[] rgdispid = workbooks.getAutomation().getIDsOfNames(new String[]{"Open"});
int dispIdMember = rgdispid[0];
Variant workbook = workbooks.getAutomation().invoke( dispIdMember, arguments );
System.out.println("Opened the Work Book");
try {
Thread.sleep(500);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
int id = workbook.getAutomation().getIDsOfNames(new String[]{"ActiveSheet"})[0];
System.out.println(id);
Variant sheet = workbook.getAutomation().getProperty( id );
OleAutomation sheetAutomation=sheet.getAutomation();
return(sheetAutomation);
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
Display display=new Display();
Shell shell=(new EventTry2()).open(display);
while(!shell.isDisposed()){
if(!display.readAndDispatch()){
display.sleep();
controlSite.dispose();
display.dispose();
System.out.println("-----------------THE END-----------------------------"); -
Question about Time Capsule and Spotlight
I have a simple question about using Time Capsule and Spotlight. Is everything that goes on to Time Capsule indexed into Spotlight? It would appear so but when I search for something (that is still on my hard drive and also backed up to Spotlight) only the local copy appears. Would it be that it finds the closest copy and if that were not there it would point to the Time Capsule copy? Thanks in advance for clarifying this for me.
The automatic setup in the airport utility has changed something.
Is the line down to the TC from the express dotted.. in other words is wireless??
Funny stuff happens.
Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
Make sure wireless is set to off in the express.
Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
So for example the bridge on the network tab.
The summary page can also be a help.
There is a half summary page when you click the item in the airport utility.
There is also a fully summary page, when you hold option key and double click the TC icon for example. -
Design question about SNASw, DLSW and VDLC
Hello,
I have a question about Ethernet redundancy in an APPN environment.
Let's have an example with 3 routers running SNASw that are on the SAME LAN (no vlans) as the Mainframe's OSA (one OSA only). APPN is configured on the Mainframe.
Using DLSw+, all downstream PUs are connected to the 3 routers. Can I define in the VDLC interface of each router the SAME MAC address, and this MAC address be the destination MAC of the downstream PUs?Hi,
yes, headend routers are the ones in front of the OSA/mainframe.
If you replace a tokenring with ethernet in the data center/headend, than the snasw dlsw solution is almost perfect for you. If you use hpr/ip to connect upstream to the host you are all set.
In that case you dont advertise any mac addresses on the local ethernet between the snasw/dlsw routers and the osa since it is hpr/ip. Basicaly ip routing only.
From the clients perspective, they dont really know that there is a change since you replicate the old tokenring mac address as vdlc mac address/snasw port and the end systems still connect to them like they did before.
In respect to dlsw ethernet redundancy we have to be a bit carefull not to mix the scenarios.
Dlsw ethernet redundancy is designed for the branch. Not the data center.
If you use dlsw ethernet redundancy with ethernet switches, and in almost all cases today ethernet means ethernet switches, you configure a mac address mapping between artificiall local mac addresses and your real remote mac address of the host.
On each router you configure a unique local mac address. Than you point half of your end systems dmac to the local mac address configured on router1 and the other half to the local mac address configured on router2. That way you achive load balancing.
The two routers exchange their mapping and in case router1 looses the connection to router2, router1 will activate the mapping it learned from router2 aswell and then take over those circuits additional.
If you decide that you configure on router1 the local mac address equal to the remote mac address, because you have a large number of clients and can not simply change the damc's on all of them, than you need to configure a "dummy" mapping on router2 and router1 will get all the circuits in this example. router2 would be purely for redundancy in case router1 goes down.
If you think about this than it is clear why dlsw ethernet redundancy is designed for the branch. In the branch we map local to remote mac addresses and the remote mac addresses are the hosts. Typically there are only a limited number of host mac addresses to map.
If you turn this around and put dlsw ethernet redundancy on the host end than you have to map all clients. If you have only one or two clients this is certainly doable. But if you have a large nuber of clients this is simply not manageable.
thanks...
Matthias
Maybe you are looking for
-
ITunes and Windows Vista Movie Maker
I am asking for help and apologize if I am in the wrong area - we just purchased a computer and I need some help - we have an HP that came w/ Windows Vista. I am trying to make a movie on Windows Movie Maker and tried to import a song from Itunes tha
-
When I switch on my MacBook pro, it tries to load the operating system but after some seconds the MacBook pro switch off. I can t get in to my desk.
-
Storing data in data bag with webdynpro for abap
Hi, It´s possible to store data in data bag with webdynpro for abap? The EPCF client data bag API provide methods to store data in a transient data buffer on the client: EPCM.storeClientData(nameSpace, name, value) Does web
-
Unable to add allowed VLANs to TenGig trunk port
Hi, I've got a ten gig interface on a 6509 running 12.2(33) configured as a trunk, but I've not been able to add any allowed VLANs as I've done before on other ten gig ports on different 6509 chassis. Am I missing something obvious? I'm assuming that
-
Is there any way to go back to prvious version of software befoe 1.1 on ipod nano 6th generation. After update it switches off all the time after about 10 secs and I preferred it when I could listen to songs when in sleep mode without using too much