Going to dump

Hi Abapers,
I have done one alv which was executing fine. suddenly it went to dump
Runtime error: READ_REPORT_LINE_TOO_LONG.
please help me... very urgent....
points will be rewarded.

Hi Premraj,
In SE38 from the top menu, goto Utilities --->Settings
in the ABAP editor tab open editor tab
you will see a checkbox at the bottom "Downward-Compat.Line Length"
Check this checkbox and activate your program.
I hope this will resolve the problem.
Regards,
Pankaj Sharma

Similar Messages

Depot Sales -J1IJ while choosing excise invoice going to dump

Hi Gurus,
In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference.
we are facing issue in J1IJ, when we click on the Choose button (first button below select Excise invoice for delivery statement), we need to get the Excise Invoice number reference which is captured at Plant. When we tried to click on that Choose button, we are not getting any excise invoice numbers and instead itu2019s going to dump .
Dump analysis says:
Runtime Errors         SYNTAX_ERROR
Date and Time          14.09.2009 16:43:01
     Short text
          Syntax error in program "SAPMJ1IK ".
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
          The following syntax error occurred in program "SAPMJ1IK " in include "MJ1IKF01
           " in
          line 38:
          "Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
          "d tables nor defined by a "DATA" statement. ."
          The include has been created and last changed by:
          Created by: "SAP "
          Last changed by: "SAP "
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          The following syntax error was found in the program SAPMJ1IK :
          "Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
          "d tables nor defined by a "DATA" statement. ."
     Trigger Location of Runtime Error
         Program     ????????????????????????????????????????
Could any body help me out to come out of this issue.
Thanks&Regards
Sreekanth

Hi Sreekanth,
If this is first time you are doing look for OSS notes, Please escalate this issue to your basic and apap consultants.
R u following the following flow in case of stock transfer from mfg plant to depot plant.
PlantA:
ME21N
VL10B
VL02N
VF01
J1IIN
Plant B:
MIGO - (Goods Reciept & Excise Capture)
VA01
VL01N
J1IJ
VF01
Here at goods reciept you need to capture excise inviove same will populate when you make a sales from plant B using J1IJ transaction.
Thanks,
Swamy H P

Function module going for DUMP

Hi ALL,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
When iam Executing this FM through SE37 F8 its running but iam not able to display or change this ZFM.
In our DEV sytem it is working properly.but Client system it is going for DUMP.
I have gone dump analysis its saying
An exception occurred. This exception is dealt with in more detail below
. *The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither caught nor passed along using a RAISING clause, in the procedure
MO_IMPORT_MODIFICATIONS" "(METHOD
Length error occurred during the IMPORT statement
*The system found when importing that the target object was longer or
shorter than the object to be imported*
Thanks in Advance,
Madhu.
Edited by: madhubabu rao on Apr 23, 2009 10:34 AM
Edited by: madhubabu rao on Apr 23, 2009 10:36 AM

Hi sekhar,
I did not transport individually.I have transport 3 FM in a function group and it is assigned to a Package.
First i have 2 FM in my function group after that i have copied one more FM from another Function group.
in SE80 right click -->copy it asked me function group name only .not transport number.
After copy the FM i have transport total package.2 FM are working properly .The FM which i have copied it is not able to display or edit.
Madhu

Sales order going to dump when we enter product in the transcation

Hello Gurus,
I am facing a problem in the sales order, when i enter a product in the transcation(TA) it going to dump........It is showing the message like this.........,
What happened?......
    Error in the ABAP Application Program
    The current ABAP program "SAPLCRM_MKTTG_PF_SEL_INFOSET" had to b
     because it has come across a statement that unfortunately cannot be
     executed.
Error analysis......
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThSAPOCMINIT'#Unable to determine host address:
      NiHostToAddr failed "
    Status of connection.... "CODE=CM_PRODUCT_SPECIFIC_ERROR -1 -1
    SAPCODE=497
     CONV= " Internal error code.... "RFC_IO5"
    There is an error in the communication system. To clarify
    and resolve the error, contact your system administrator.
    Last error logged in SAP kernel
    Component............ "NI (network interface)"
    Place................ "SAP-Gateway on host IGINXMIEP / sapgw00"
    Version.............. 38
    Error code........... "-2"
    Error text........... "hostname 'iwdf7yte.wdf.sap.corp' unknown"
    Description.......... "NiHsLGetNodeAddr: hostname cached as unknown"
    System call.......... " "
    Module............... "nixxhsl.cpp"
    Line................. 223
    The error reported by the operating system is:
    Error number..... " "
    Error text....... " "
    Please provide me the solution...........its very urgent
Thanks and Regards
Chandramohan
I dont Mind to reward full points............

Hi julius,
Thanks for the reply,
The settings in the SAP Note, which you have given....they are in already in place.
Regards
Chandramohan

Import FM is going for DUMP

Hi All,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
I have gone dump analysis its saying
"Length error occurred during the IMPORT statement."
"The system found when importing that the target object was longer or
shorter than the object to be imported."
where did i mistake while import ? or while transport?
That FM is working properly in our DEV.
Thanks in Advance,
Madhu.

Hi Madhu,
Suggested to post this in logistics forum for better answer.
Software Logistics
Regards,
Debasis.

Call for adobe form is going for dump for multiple users

hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....

That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham

Duplicate records in PO scheduled line for framework order (going for dump)

Hi all,
i am creating framework purchase order with item category B. I am assigning external number range for PO. This PO is created with respect to expense PR. i just found there is duplicate records are appearing in schedule line for the same item.
Then, after i save the PO, it is going for dump & sending some message to SAP inbox that there is duplicate records.
later i can not find those PO in the system. Please let me know where i am doing mistake ? why duplicate records are appearing in PO scheduled line ?
Thanks a lot
pabi

Hi,
Once you please debug the particular program with the help of ABAPer. That may resolve your issue. Thanking you

Standard Tcode : VA01 is going for Dump

Hi all,
While creating sales order in VA01, the screen number 4003 having arrow Buttons Shift + f5 , Shift + f6 , Shift + f7 , and Shift + f8. If i am pressing that it is going for dump can any body help me why it is going for dump in ECC 6.0 . But it wont happend in 4.5B. Can any body help me in this problem.
Thanka & Regards,
Rajasekhar.

What is the error from the dump?
Rob

PPOME - Org.Unit (Acount assignment) goes into DUMP

Hello Gurus,
ive got a Big issue, concerning SAP HR module.
When we start the TC: PPOME we select org.unit from the structure.
It is beeing showed normaly, but only when we select Acount assignment it goes straight into DUMP,
saying:
Runtime Errors         STORAGE_PARAMETERS_WRONG_SET
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    In the system profile, set the parameters
    -abap/heap_area_dia and
    -abap/heap_area_nondia
    to a maximum of 189714480. To be on the safe side, reduce the value by 10,000,
    000.
    Then restart the SAP system.
These corrections are not needed since the system for every other purpose (SD, MM, FI) is working, only for HR module during acount assignment is going into DUMP.
Any advice why this happens to some of the Org.Units?
Regards,
Laurynas Prikockis

Hi ,
Please check this thread might be helpful.
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
Regards,
Siraj.

SM30 going to dump for a Ztable whose fields I recently changed

Hi All,
Need to resolve a very urgent issue. We added a new field to a Ztable in DEV & hit the table maintenance generator with screen 8. However when I transport these changes to TS1, the SM30 transaction goes into dump with the error stating screen "009" missing.
When I created screen "0009" in DEV and retransport to Test, I still get the same error.
what can the error be here?
Thanks,
Tejas

Hello,
Once the fields of the table is changed then u need to adjust it in SE14 Tcode.
Then delete the existing Table main. and recreate it.
Vasanth

While drill down a char system going into dump

Hi,
We have changed 0COUNTRY as a navigation attr to the 0COMPANY and added to the Muti provider.
In query level initially for 0COMPANY data is paulating while trying to drill down 0COUNTRY with 0COMPANY then system is going into dump.
Thes system message;
The current application triggered a termination with a short dump.
An error occurred while communicating with the BI server.
As a result of this error, the system has been disconnected from the BI server.
Detailed description
can any one let me know the reason.
Regards,
Sharma.

Hi,
The problem is resolved in my self.
Regards,
Sharma

ADOBE form going to dump without trigering interface

Hi,
I have a strange issue that one of my ADOBE form going to dump withou trigeering the form interface. The error says ' KOMVD' is used unknown. But I have not used KOMVD directly in my form binding and interface code also. Please help to fix this issue.
The following is the breif of dump message
The following syntax error occurred in program "/1BCDWB/SAPLSM00000405 " in
include "/1BCDWB/LSM00000405F01 " in
line 4082:
"The field "KOMVD" is unknown, but there are the following fields with "
"similar names: "GT_KOMVD" and "GWA_KOMVD"."
Source Code Extract
Line SourceCde
    1 METHOD if_badi_sd_bil_print01~print_data.
    2
    *3 * Call the generated function module*
>>>>>   CALL FUNCTION iv_fm_name
    5     EXPORTING
    6       /1bcdwb/docparams = is_docparams
    7       bil_prt_com        = is_interface
    8     IMPORTING
    9       /1bcdwb/formoutput = es_formoutput
   10     EXCEPTIONS
   11       usage_error        = 1
   12       system_error       = 2
   13       internal_error     = 3
   14       OTHERS             = 4.
Thanks and regards
Susmitha

Hello Susmitha YR
verify the Currency/Quantity Fields in your interface.
In your structure, tou should use a reference to KOMVD.
Thierry

At F4IF_INT_TABLE_VALUE_REQUEST program goes for dump

Hi,
The following piece of code in my program goes for dump.Please help:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_screen-low.
SELECT FIELD1 FROM TXXX INTO TABLE T_field.
    IF SY-SUBRC = 0.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD               = s_screen
        TABLES
          VALUE_TAB              = T_field.
    ENDIF.

Hi,
I think you need to write
Try with the below code.
PARAMETERS: p_bukrs(4).
DATA: BEGIN OF itab OCCURS 0,
       bukrs LIKE t001-bukrs,
      END OF itab.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
SELECT bukrs FROM t001 INTO TABLE itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS' ---> Field from internal table Itab
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'P_BUKRS' --> Screen field
      value_org       = 'S'
    TABLES
      value_tab       = itab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
If it is a select option is s_bukrs then
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'S_BUKRS-LOW'
      value_org       = 'S'
    TABLES
      value_tab       = itab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar Bandanadham
Edited by: Velangini Showry Maria Kumar Bandanadham on Jun 12, 2009 7:00 AM

Ip was going to dump

Hi All,
When iam double click the existing infopackage in dev it was going to dump.
Can some one help on this .
Thanks,
chella.

Hi ,
Plz try to run this program RSSM_OLTP_INIT_DELTA_UPDATE .it will set all the delta & init updates.
Regards,
Sai

Program going to dump, when double click perform "f_form_one "

when i double click the the variable it is expected to display the database field but it is going to dump. the is the same with when we double click the perform f_form_one.
Please tell me any one how to go abt this

Hi Sirivaram,
I've never had this problem ever before, could you please specify your problem more exactly? For short dumps, pls go to ST22 for monitoring.
Thanks
Luis

Going for dump while using field symbols

Hi all,
   I am using field symbols in my program. Program is going dump for some company codes and working fine for some company codes.
I am confused. Please check this code where the error is shown.
LOOP AT i_final ASSIGNING <fs_final>.
    AT NEW belnr.
     if <fs_final>-wt_withcd = 'SF' or <fs_final>-wt_withcd = 'XF' OR <fs_final>- wt_withcd = 'WF'.
      MOVE <fs_final> TO wa_final1.
      g_qsatz = wa_final1-qsatz.
      APPEND wa_final1 TO i_final1.
      CLEAR wa_final1.
     ENDIF.
    ENDAT.
    READ TABLE i_final1 ASSIGNING <fs_final1> WITH KEY belnr = <fs_final>-belnr.
    IF <fs_final>-wt_withcd = 'SF'.
      <fs_final1>-wt_withcd1 = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb1 = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    IF <fs_final>-wt_withcd = 'XF'.
      <fs_final1>-wt_withcd2 = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb2 = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    IF <fs_final>-wt_withcd = 'WF'.
      <fs_final1>-wt_withcd = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    AT END OF belnr.
      <fs_final1>-qsatz = <fs_final1>-qsatz - g_qsatz.
      clear g_qsatz.
    ENDAT.
ENDLOOP.
Please check the code and help me.
Thanks in advance,
Shalem

HI Shalem
Please check this code:
LOOP AT i_final ASSIGNING <fs_final>.
AT NEW belnr.
     if <fs_final>-wt_withcd = 'SF' or
        <fs_final>-wt_withcd = 'XF' OR
        <fs_final>- wt_withcd = 'WF'.
        MOVE <fs_final> TO wa_final1.
        g_qsatz = wa_final1-qsatz.
        APPEND wa_final1 TO i_final1.
        CLEAR wa_final1.
     ENDIF.
ENDAT.
READ TABLE i_final1 ASSIGNING <fs_final1> WITH KEY belnr = <fs_final>-belnr.
IF sy-subrc EQ 0.
     CASE <fs_final>-wt_withcd.
     WHEN 'SF'.
          <fs_final1>-wt_withcd1 = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb1 = <fs_final>-wt_qbshb.
     WHEN 'XF'.
          <fs_final1>-wt_withcd2 = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb2 = <fs_final>-wt_qbshb.
     WHEN 'WF'.
          <fs_final1>-wt_withcd = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb = <fs_final>-wt_qbshb.
     ENDCASE.
     <fs_final1>-qsatz = <fs_final1>-qsatz + <fs_final>-qsatz.
     AT END OF belnr.
        <fs_final1>-qsatz = <fs_final1>-qsatz - g_qsatz.
        clear g_qsatz.
     ENDAT.
ENDIF.
ENDLOOP.
Kind Regards
Eswar

Going to dump

Similar Messages

Maybe you are looking for