Going to purchase tonight, need advice

Hello all, I've posted here once before but I'm actually taking the plunge tonight and purchasing the MBP tonight. I just called the Apple Store Mall of America (which is where I'll be puchasing) and asked if it was possible to make sure the MBP I will be recieving is the most recent week model. In short, he wasn't very pleased about this question and refused to do that for me. He said I could come in and take a look at the model myself and I can see if it's recent. I need some help now. What am I looking for in regards to the model's week? Is there anything else I should be doing? Thanks in advance.

What am I looking for
in regards to the model's week?
the first 5 digits of the unit's serial number, which should be W86xx.
"W8" means assembled in shanghai, "6" is the last digit of the production year, and "xx" is the week number....
this number is located on the bottom of the computer, underneath the battery, in the battery bay (i.e. you need to remove the battery to see the number)
BTW - A limited number of MacBook Pro computers shipped with a different serial number on the computer label than the one which appears in the About This Mac window. MacBook Pro computers of model MA463LL/A with serial numbers W8612xxxxxx may be affected. If your computer is in this range and in About this Mac it says that the computer's serial number is something like 23456VJ0LL, check the serial number in the battery bay—if the two differ, use the serial number in the battery bay instead of the one in About This Mac.
(from http://docs.info.apple.com/article.html?artnum=303328 )...
cheers

Similar Messages

Installing Leopard on a new HD on my MacPro tonight need advice; HELP!

I am installing Leopard tonight on a new WD 400GB HD on my Mac Pro. I also have Tiger on a different HD on my MacPro.. which I will keep untill I am sure Leopard is running properly.
I have a few basic Questions on how I should go about the installation:
1. Should I remove the jumper ( if it has one installed) that came with the new Western Digital 400GB SATA II HD drive even though it will be a master.. I had heard that SATA II HD's didn't need jumper settings on a MacPro...
2. Before I install Leopard should I format the drive in Tiger for HFS+ Journaled? or will the Leopard install program do that for me?
3. To start do I just put the CD in and shut down and restart the MacPro and then point the Lepoard DVD at the new drive ? (which I will name Leopard)
On boot after installation is it the command or option key that I press on boot to select between starting in Tiger or Leopard?
Thanks...

You shouldn't have a problem. There's no license checking by the Leopard install

New Purchase and need advice

I purchased an iPod on Ebay and it did not come with the CD software that you would get had I purchased brand new. I attempted to download software from the website but once downloaded it won't install. Can someone help me with the exact link I should use to get this software? I'm totally lost here...

http://www.apple.com/ipod/download/
You'll also need iTunes
http://www.apple.com/itunes/download/

Purchasing question - need advice!

Hi all! I'm new to this discussion board but not to Macs. I'm a graphic and web designer that just struck out on his own and I need a Mac b/c my PC isn't going to cut it. I would like to get a new Mac Pro but I have CS 2 Premium and the MX 2004 web suite or whatever it's called. I know people are having problems with the latest OS and older versions of the creative suite... not sure about MX 2004. I just wanted to know if I should just go ahead and get a new Mac and hope for the best or if it would be better to find a pre-owned Mac somewhere on the web that's older of course? Also, if pre-owned is the way to go any recommendations on where to get it would be nice. Thanks!

If it was me, (and I'm well aware that it isn't), I would get the Mac new and the software from eBay if I was lucky enough to find an unregistered copy or something that is close enough but good enough.
Try to get the best you can afford. It avoids you having to upgrade and lose money again later. I used to have a G5 1.8DP and while it was very very good, once I upgraded the graphics card it became noisy. I used to love the way it looked with the side cover off though, (plastic shield still in place). Even the new MacPros can't run like that safely for too long. The move to the Pro though saw a significant increase in speed.
The name 'Mac Pro' sounds really cheesy though. I think G6 is where they should have moved toward.

First external monitor purchase. Need advice.

I am considering buying an external monitor for my Macbook. The monitor in question has a VGA input and a DVI-D input.
1. Which is better: VGA or DVI-D ?
2. I found Macbook to DVI-D and Macbook to VGA adapters. Unfortunately, these adapters are only 6 inches long.
3. As I have never purchased a computer monitor before, I do not know if lcd monitors come with pc-to-monitors cables. In other words, are pc-to-monitor cables sold separately?
4. If pc-to-monitor cables are sold separately, could anybody recommend a good place to buy pc-to-monitor cables ?
Thanks in advance.

Your computer has mini-DVI then. MiniDisplayport is on the latest white MacBook.
The display port is to the right of the USB port in both images.
Here's a link for the mini-DVI:
Mini-DVI
and for MiniDisplayport:
MiniDisplayPort
~Lyssa

How do you contact apple support online just going round in circles, need advice on resetting ipod touch password which is locked. we have followed online instructions about 10 times and it doesn't work please help

ipod is disabled
i have tried to reset my ipod following the online instructions but it hasn't worked

What exactly happens and when does it happen when your try:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Also
Place the iPod in recovery mode using one of these programs and try to restore:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
when

I need advice after purchasing a MacBook Pro in the USA for use in the UK.

Hello all out there,
I bought a 13 inch MacBook Pro in the USA last week and brought it back with me to the UK. I had been given an Apple World Adapter kit by the gentleman in the apple store, however I realised today that it isn't for the MacBook Pro and is only for iPads, iphones and ipods. This means that despite paying around $40, I am stuck. I need advice as to how to charge the laptop in the UK now? Is there an adapter for this or can I use any ordinary USA to UK adapter and stick it to the one I have from the USA?
Any advice would be much appreciated.
Thanks,
Zainab

AFAIK, the World Adapter kit has a replacement PLUG for the power brick. What you need is just something that can go into your country's wall socket, as the power brick itself is universal and can work from 100-240 VAC, 50-60 Hz.
In other words, you ARE aware that the power brick has removable plugs on the AC end, right?

Need Advice: Re-Ripping ALL of my CDs using ALAC/Apple Lossless

I need advice from some experienced users (having searched for answers for a couple of days and not finding a comprehensive solution). I want to "upgrade" my iTunes library (95% of which is from my CD collection) from ACC (the default iTunes file format) to ALAC (lossless format). I realize that music purchased from the iTunes store will remain in ACC format, but I am using this opportunity to "archive" or "digitize" my CD collection. I have some, but not a lot, of non-critical tags, album art, etc. set up with my current library. I will be saving all of the music files in a new folder on a single hard disc on my network (with backup). I use iTunes Match. I have Windows PCs, Macbook Pro (OSX), iPhone, iPad, iPod. Given these factors, I am seeking recommendations:
Does it make sense to "start over" and create a brand new iTunes library?
(this would certainly give me time to complete my project while still using my current iTunes library)
If yes, what do I need to do in order to "activate" the new library once it is complete in order to reset iTunes Match and all of the other devices using my iTunes library? What complications can I anticipate?
If no, what is the best way to replace the existing albums in my iTunes library with the new ALAC files? Do I simply insert the CD and import it with my new settings? Will iTunes take care of the rest (saving the new file, deleting the old format, matching tags, etc.)? What complications can I anticipate?
What are the advantages/disadvantages of allowing iTunes to "Keep iTunes Media folder organized" and "Copy files to iTunes Media folder when adding to library?"
Any other suggestions, warning, smart alec remarks?
I know there are a lot of questions bound up in this post, but if you have converted your iTunes music collection to one of the lossless or uncompressed formats, I would love to learn from your experience (and am guessing others will as well). Thanks!

In most cases you should be able to re-import your CDs to the existing library - iTunes will automatically replace your media files and retain all previously added metadata. This does depend on the library being the same one as you originally imported the CDs in AAC format (i.e., the same computer or the result of a complete library migration). You should experiment with a couple of CDs to verify this behavior - I've done this successfully to "update" some of the older content of my library which had been imported as 128kbps AAC to 256kbps..
Obviously this approach will put your media into the existing library media folders, which is going to be the simplest approach. If you subsequently want to move the library to a different drive, see turingtest2's user tip on Make a split library portable. If you're concerned about running out of disc space on the drive that currently hosts your library, you could follow these guidelines to move the library to a second, larger drive before starting to re-import using ALAC.
This is the approach I'd recommend, though there are a couple of other possibilities:
Create a new, empty library on the second drive by holding down SHIFT as you start iTunes; when you see this prompt:
click on Create Library..., navigate to the second drive and create the library there (best approach is to create this in a new iTunes folder in the root of the drive. This will guarantee "clean" imports but you'll not be able to re-use any metadata, artwork, playlists, etc. contained in your current library. To switch between libraries, SHIFT-start and use the Choose Library... option to select the library you want to be active.
On the second drive, create a folder called iTunes in the root and a folder called iTunes Media inside this. Then, with iTunes running against your current library, select Edit > Preferences > Advanced, change the iTunes Media folder location to the one you've just created (i.e., X:\iTunes\iTunes Media, if the second drive is "X:". Also make sure that the Keep iTunes Media folder organized and Copy files to iTunes Media folder... options are checked. When you re-import your CDs the media files should be placed on the second drive ... note, though, that I've not verified that this approach will work - in theory it should do but you should definitely test with one or two CDs before going any further. This approach will result in a "split" library where your library database is on the C: drive and the media divided between drives (since your iTunes Store purchases will still be on C:). This is generally not a good idea (if for no other reason than making creation and maintenance of a backup of your library more difficult). Again, tt2's notes on Make a split library portable describe how to bring the library into a consistent, well-formed layout.

Need advice on video software.

Need advice on video software.
I currently use adobe elements 3 and have done so for a few years now with no problems. my os is XP and my system is a couple of years old, but we do have a brand new win7 machine in the house.
I am currently look at Cyberlink PowerDirector 8 Ultra OR Adobe Premiere Elements 8. Reviews for both softwares seem very good BUT, when I dig deeper into user reviews instead of editor reviews do I find problems.
Major problems with program crashing all over the place, at start up etc, and it is still not getting along with any win7 machine? Major problems with drivers. Honestly, I do not want to have to jump through dozens of hoops to get any software to run. After I pay for it, it should run, period.
Has anyone else here used both softwares and can you give an honest opinion of each?
I am also asking these same questions on the cyberlink site.
I would like to upgrade my video software to take advantage of the new features that are coming out but I really don't want a big headache trying to run one or the other. To be fair, when I bought adobe elements 3 I had also bought pinnacle, which has gathered dust since my first week with it, which is why elements was purchased. That was money wasted and I do not wish to repeat this. I would like to go with Premiere Elements 8 but remain very unsure.

If your newer machine is Win7 64-bit, it might be worth waiting for SP-1 to be issued, and then hope that 64-bit drivers are fully included. The 64-bit drivers now seem t be an issue at this point, and that will affect any NLE program.
Also, and regardless of which particular program you choose, optimizing your computer, the OS, the hardware, and the resources management, will go a very long way to insuring success. Few programs can tax a computer, as an NLE can - any NLE. Video and Audio editing will stress your system, like almost nothing else can, except for heavy-duty CAD, or 3D work, though those are usually done only on specialized, optimized computers, designed just for those applications.
Not the specific advice that you seek, but it's the best that I can do.
Good luck,
Hunt

I am going to purchase the latest Mac Book Pro. How do I transfer data from my very old Macbook running OS 10.4?

I am going to purchase the latest Mac Book Pro. How do I transfer data from my very old Macbook running OS 10.4?

You may want to use the Migration Assistant, which appears the first time you start up the new machine during setup, and also is available later (it is found in /Applications/Utilities.) Note that if you are running 10.4.x on the old MacBook both machines need to use FireWire to do this, but the late 2006 MacBook has that. You will need a special 4 pin to 6 pin FireWire adapter cable, as the FireWire ports on the newest MacBook Pros are different.

Logic Pro + Node + Studio Setup, Need Advice, Please Help.

Hello everyone.
Ive just recently bought Logic 7.1 for my Quad PowerMac G5, and Im loving it!
Im going to build a studio in my garden (yup, im no pro). And I was thinking of purchasing a PowerBook for the studio and offload all processing and storage to my Quad machine (located in my study room in the house).
Im also considering purchasing another PowerMac G5 as for my server, and I would like to setup the server to also process Logic data and storage. Is this possible? Would i need to buy Xsan?
Another question, can I use more than 1 PowerMac G5 for Logic Pro? Also, how do I setup a Node? And in order for the Node to work do I need to purchase more Logic Pro USB Keys?
You may be wondering why am I going to purchase a PowerBook for the studio, well the answer is, i don't feel its safe to have a very expensive machine in studio, don't want it to get damaged by environment such as damage or theft, plus i spend alot of time studying.
One more thing, I have a PowerBook G4 and IMac G5, can i also setup Nodes on these machines aswell?
Any input would be brilliant. Also, your suggestions on studio setup would be also welcome.
Thanks in advance.
Haresh
Quad PowerMac G5 Mac OS X (10.4.4)

You won't need Xsan. I would test things out before getting too far into the idea. Your host should really be the strongest computer, all 3rd party, EXS, etc..plugins are not nodeable. You can use more than 1 node but as I see it your bottleneck would be the PBook. You can use regular file sharing just fine for this. You will need 1 USB key for each computer running Logic, the Node app requires no key. Therefore, you can run Logic on your book and 3 nodes with 1 key if you like. I would encourage you to use an iMac G5 as opposed to a Pbook if you really want to flex Logic muscle, which from the sounds of it, you intend to. iMac G5s are even cheaper than the Pbooks. Another thing to consider is some people have had no luck setting up Nodes-I've never had problems with it but there are some out there, maybe they're weird, maybe I am-but don't be 100% reliant on Nodes all the time until you have proven that in practice.

Major Issues with installing 4tb internal. Really need advice please

In the process of a long needed upgrade to my 2010 Mac Pro Quad core 2.8 and have run into a serious headache that I really need advice on so I can get back to work. I've already spent 2 days dealing with all of this...
Just did a new SSD install and Migration which went fine but I'm also updating the rest of the internal drives. My main (non boot) drive was being upgraded from a Seagate Barracuda 3tb to a 4th Deskstar NAS (it was showing as compatible with my desktop, see links below). My 3tb ran fine for years but now due to it being heavily used I want to switch to a new drive and I can also use a bit more space.
The issue I'm running into is that initially on boot, my system was telling me it couldn't recognize the disk and it wasn't even showing up in Disk Utility. I had to purchase a SATA USB 3 kit to attach it as an external to get it to show which worked without problem. With the USB kit I was then able to partition it (GUID, Mac OS extended journaled) and format it properly. After reinserting the drive into my tower as an internal it failed to show again. After a few attempts of restarts and trying various bays it popped up but showed as a non formatted drive and I was told again that the system didn't recognise it. I was then given the option to initialise and was then actually able to then format and partition it though Disk Utility while it was installed as an internal.
Figured that was problem solved but when I went to check the drive and getting ready to transfer files over I noticed that Disk Utility was only allowing the First Aid and Partition options but not Erase, RAID, Restore which I'd never seen before. I then also noticed that none of the drive connection info was in the same format nor will it even provide drive bay info, connection info or read/write status (See screen shots). This is what I can't figure out and really need to clarify before I put full trust into using this drive.
Any info would be greatly appreciated...
Deskstar 4tb internal info which is installed in Bay 2
3tb Seagate which I trying to retire and transfer from.
Here are the weblinks to the Deskstar 4tb drive and the compatibility list but I support isn't allowing me to add direct links so add the www. before hand.
(Drive - eshop.macsales.com/item/HGST/0S03664/) (compatibility list - eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macpromid2010.html).

What OSX version?
Disk Utility in later versions of ML and I think Mavericks have problems formatting with 4 TB internal drives.
http://forums.macrumors.com/showthread.php?t=1661024
http://apple.stackexchange.com/questions/112266/why-doesnt-my-mac-pro-see-my-new -4tb-sata-drive

Scanning Pictures for HD Project I Need Advice

I am about to *Scan Pictures for HD Project* I Need Advice. The scanner is a HP Scanjet G4050 my questions are:
1: At what resolution do I scan these pictures _+(300 or highest dpi available)+_
2: What color choice is necessary *(RGB vs CMYK)*
3: Can you please suggest points for creating a backdrop for the pictures (various sizes) in the Timeline
Thanks in advance

Scan the picture like you normally would. If the vertical resolution is 1080, you are fine. Don't worry about the 1280 width as black will be in that area not taken up with the photo. That part won't matter if it isn't 1280 if it is a vertical picture. If you don't have at least 1080 high, you might want to re-scan at a higher resolution. If you have it say, 2000 pixels high really no big deal except you don't need it that high and all that extra size slows down your system. If you want it at a lower resolution after you scan go into Photoshop->Image->Image size. Be sure and check "Constrain Proportions" before you change the dimensions in the top box for the height (where you are best using the units as pixels) That way the picture will stay in proportion. Don't use this second method to 'add' more pixels as the quality suffers when you go up this way. Rescan if you want MORE pixels.
All the above is talking about vertical pictures. If you have a really wide photo that is not very tall, use the same principle but keep the width constant. For example let's say you have a 2x6 inch photo. Make sure the width is at least 1280 pixels. Don't worry that the height will be less than 1080 because black will take up that space.
If you are going to do any zoom in and/or panning across a picture, you'll need to make sure it has more than the minimum pixels. For me a little goes a long way, so I zoom in slowly maybe 10-15%.
Sharon

Syncing iPod to new user account-need advice

Hey All! I set up a new user account for my friend on my imac, so he will want to sync his iPod Touch to iTunes, iPhoto, iCal, etc. in his new user account. I know there are plenty of freeware and shareware apps to get his music from the iPod into iTunes, but need advice concerning everything else oh his iPod.
I know I'll first get that pop up window that says his iPod is synced to another computer, and that I use "cancel" rather than "sync and erase". After doing that, I guess I use one of the shareware apps to get the music transferred over.
Now, after that, if I do a regular sync, will iTunes transfer his apps that are on the iPod?
Do I need to open iPhoto and download the photos on his iPod into iPhotot before doing a sync?
What about text messages? Will they remain in tact?
I don't think he uses the calendar on his iPod so no worries there....
What about Playlists that he has on the iPod? Will just the music transfer with the shareware apps or playlists also?
Will Notes be saved?
Thanks for your help. Don't wanna screw up his iPod by setting up this user account for him.

Apps are tied to the ID I assume the new account is just on the iMac and not a new iTunes account?
Yes, you can import photos into iPhoto the same as you would off any camera.
You would need to transfer purchased content (like apps). You can't do that via sync as it's a new computer and all content will be erased as you are aware.
http://support.apple.com/kb/ht1848
What happened to your friends computer? Was there no backup?

Ready to take it one higher ...need advice on best way to get more audio in

Nearly ready to upgrade to LP7...need advice on more gear.
Longtime Logic user, my old rig running with an Audiowerk 8 card (dont laugh too hard please, its worked great for years! ).
Now, after purchasing a MBP and LE7 ... how best to upgrade even further, to be able to record say 4-8 tracks (live instrument) at a time, into the optical or Firewire ports. I have an external 750Gb FW drive.
Also have a Mackie 16 chnl mixer and hoping to find a way to send the Master stereo pair (or maybe even track inserts) from the Mackie to the optical or FW input of my MBP. But how to do this ? Im guessing there's a box or gizmo somewhere that would be perfect.
Unfortunately, all of the boxes and gizmos Ive looked at so far seem to duplicate functions I already have, esp mic preamps (dont need any more of those !). I prefer 19" rackmount devices as they work well with portability, and fit into my SKB rig easily.
TIA

Also have a Mackie 16 chnl mixer and hoping to find a way to send the
Master stereo pair (or maybe even track inserts) from the Mackie to the
optical or FW input of my MBP. But how to do this ? Im guessing there's
a box or gizmo somewhere that would be perfect.
if you really want to use the pre's on your mackie, and it has multiple bus/aux outputs which I presume it does, then you can easily set up a device such as the 828 to take all your input channels from the mackie, and then to run a bunch of return pairs back out to it.
depending on your budget there are prob a few others for you to look at. RME and metric halo always get rave reviews from users, but are pricier. also the focusrite sapphire might be worth a look, as well as the apogee ensemble.
also I just noticed you are using logic express, not pro. so there may be some limitations on the number of simultaneous inputs and outputs that I'm unaware of.

Going to purchase tonight, need advice

Similar Messages

Maybe you are looking for