Golden Gate Data Type

Hai,
IS there any data type can be used instead of using CLOB or BLOB data type?I believe CLOB n BLOB data type,golden gate cannot replicate this data type.
Any suggestion???
Regards,
muddy

Did you read the installation guide for Oracle (assuming that is what you're using since you didn't say otherwise), under Supported Oracle data types?
Large object data types● CLOB
● NCLOB
● BLOB

Similar Messages

  • Golden Gate Data Transformation and Filters

    Hello All,
    I have a scenario wher I need to transform the data on the go. In short, I have 2 customers, using the same software and they are each customer_id =1 in their respective application.
    However, customer_id=1 has the other customer as customer_id=55 in his application and vice versa customer_id=1 has the other customer as customer_id=12.
    I know I can already setup filters for the particular data I want to replicate. However, I don't know if I can transform it before the data is replicated.
    Here is the scenario:
    Replication from Customer A(customer_id=1) to Customer B(customer_id=55)
    ==========================================================
    -->  FILTER inserts, updates, deletes where customer_id=55
    ---> TRANSFORM customer_id=55 to customer_id=1
        --> APPLY EXTRACTS to Customer B
    Replication from Customer B(customer_id=1) to Customer A(customer_id=12)
    ==========================================================
    -->  FILTER inserts, updates, deletes where customer_id=12
    ---> TRANSFORM customer_id=12 to customer_id=1
        --> APPLY EXTRACTS to Customer A
    Thanks in advance for any advise or recommendations you might have on the subject.
    Sincerely
    Jan S.

    I've done some research and look like we are talking about Oracle Data Integrator ..... I hope not. don't want to another layer of complexity.
    I hope there is someone out there that has alternative solution.
    Thanks in advance for any assistance in this matter.
    jan S.

  • Data Guard or Golden Gate

    Hello Fellows
    I want to migrate an oracle 9i to 11g and I am not sure which is the best way to migrate my database.
    Data Guard or Golden Gate
    Thanks in advance
    Panos
    Edited by: user9141133 on 19 Σεπ 2011 2:50 πμ

    Although it is true that Golden Gate & Data Guard have a different main purpose, they can very well be used during an upgrade rsp. a migration to minimize the associated downtime.
    See for example how Data Guard can be used to minimize downtime for upgrade here:
    http://uhesse.wordpress.com/2011/08/10/rolling-upgrade-with-transient-logical-standby/
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com

  • Data Guard Vs Golden Gate

    Hi Experts,
    I am looking for High Availability and Disaster Recovery architecture for my data layer i.e. Oracle Database 11g R2
    We have two physical locations and the distance between two sites is around 20 miles.
    Site 1:
    We already implemented RAC setup with two node in site 1.
    Site 2:
    We are going to implement standalone database. (Not RAC)
    My requirements:
    1. Both databases at Site 1 & Site 2 should be replica of each other.
    2. Both databases should be in sync always.
    3. Site 1 is active and Site 2 is stand by.
    4. Client applications on Site 1 & Site 2 should always talk to RAC database on Site1.
    5.. If RAC at site 1 goes down completely, then ONLY client apps should connect to Site2 database without human intervention.
    How can acheive my requirement ? I was doing some research & found two solutions. 1. Active Data Guard 2. Golden Gate.
    Questions:
    1. Do Data Guard and Golden Gate offers same features ?
    2. Which products offers solutions to all my requirements or Do I need to use both ?
    3. If Data Guard and Golden Gate are different from each other then What is the difference between them and what are the overlapping features among them ?
    Thanks

    1. Do Data Guard and Golden Gate offers same features ?No, there's simple compare here :
    http://www.oracle.com/technetwork/database/features/availability/dataguardgoldengate-096557.html
    2. Which products offers solutions to all my requirements or Do I need to use both ?Data Guard will work and you don't need anything else. I cannot speak to Golden Gate.
    3. If Data Guard and Golden Gate are different from each other then
    What is the difference between them and what are the overlapping features among them ?Again this document :
    http://www.oracle.com/technetwork/database/features/availability/dataguardgoldengate-096557.html
    1. Both databases at Site 1 & Site 2 should be replica of each other.
    Data Guard can do this.
    2. Both databases should be in sync always.
    Data Guard can do this.
    3. Site 1 is active and Site 2 is stand by.
    Data Guard can do this.
    4. Client applications on Site 1 & Site 2 should always talk to RAC database on Site1.
    You can set your tnsnames to handle this and more. Using DBMS_SERVICE you can create an alias
    to handle this.
    Ex.
    ernie =
    (DESCRIPTION =
        (ADDRESS_LIST =
           (ADDRESS = (PROTOCOL = TCP)(HOST = primary.host)(PORT = 1521))
           (ADDRESS = (PROTOCOL = TCP)(HOST = standby.host)(PORT = 1521))
           (CONNECT_DATA =
           (SERVICE_NAME = ernie)
    )5. If RAC at site 1 goes down completely, then ONLY client apps should connect to Site2 database without human intervention.
    You can set your tnsnames to handle this and more.
    Best Regards
    mseberg

  • Oracle Data Integrator (ODI) vs Oracle Golden Gate

    We are about to start a new data warehouse project, which will require a data integration product and have the following questions:
    - ODI provides near real-time data warehousing support: - What is the difference between ODI's near-realtime data warehousing features and Oracle Golden Gate's real-time data integration?
    - How does Oracle Golden Gate achieve Real-time Data Integration? (What kind of non-invasive techniquire/procedures/processes does it use to achieve Real-time Data Integration?
    - Obviously with Oracle Golden Gate being the superior Data Integration product, what is the future of ODI?
    - Is there any product convergence planned for ODI and Oracle Golden Gate by Oracle corp. in the near/far future?
    - Most importantly, what product should we use to implement the new project: ODI or Oracle Golden Gate?
    - What is the easier product to learn/implement: ODI or Oracle Golden Gate?
    Others, please feel free to add to the above questions/concerns.
    Thanks for all your help.

    Hi,
    I tried to install the essbase driver adapter on ODI, but I can't connect to Essbase using topology manager. Anyone know about essbase drivers for ODI. I used ODI 10.1.3.4.
    Thanks all.
    Regards,
    Sumardi

  • Golden Gate with Highly Normalized Data

    Hi All
    How good and robust is Golden Gate when trying to replicate highly normalized data? Has it been used for any Oracle EBS modules as HR or Payroll ever?
    Thanks

    This is exactly what it was designed to do. It works with Oracle EBS perfectly well with the exception of AQ tables and the ANYDATA datatype.
    Good luck,
    -joe

  • Active Data Guard VS Golden Gate

    Hi Experts,
    I am looking for High Availability and Disaster Recovery architecture for my data layer i.e. Oracle Database 11g R2
    We have two physical locations and the distance between two sites is around 20 miles.
    Site 1:
    We already implemented RAC setup with two node in site 1.
    Site 2:
    We are going to implement standalone database. (Not RAC)
    My requirements:
    1. Both databases at Site 1 & Site 2 should be replica of each other.
    2. Both databases should be in sync always.
    3. Site 1 is active and Site 2 is stand by.
    4. Client applications on Site 1 & Site 2 should always talk to RAC database on Site1.
    5.. If RAC at site 1 goes down completely, then ONLY client apps should connect to Site2 database without human intervention.
    How can acheive my requirement ? I was doing some research & found two solutions. 1. Active Data Guard 2. Golden Gate.
    Questions:
    1. Do Data Guard and Golden Gate offers same features ?
    2. Which products offers solutions to all my requirements or Do I need to use both ?
    3. If Data Guard and Golden Gate are different from each other then What is the difference between them and what are the overlapping features among them ?
    Thanks

    Hi;
    Both tool are HA tool. Please see below link
    Thanks for the question regarding "Data guard vs Streams vs GoldenGate", version 11.2.0.2
    http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:3349335100346299316
    Golden Gate versus Data Guard for replication
    Golden Gate versus Data Guard for replication
    If you have still question please update thread
    Regard
    Helios

  • I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat

    I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
    I have configure Golden Gate step by step by following oracle guideline:
    http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
    When i run following command on target (oracle 10g):
    replicat paramfile dirprm/inload.prm
    I encounterd following error:
    2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
    r could be misspelled or unsupported.
    2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
    My INLOAD FILE Content are:
    SPECIALRUN
    END RUNTIME
    USERID gg_user, PASSWORD welcome1
    EXTFILE D:\oracle\gg\dirdat\ex
    SOURCEDEFS D:\oracle\gg\dirdef\emp.def
    MAP hrschema.emp, TARGET gg_user.emp;
    Can you plz suggest me that where i am wrong?
    Thanks advance to all experts.

    amardeep.sidhu wrote:
    That should work, just in case try adding DBLOGIN before USERID
    DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P

  • Golden Gate for mysql5.5 extract is Abended,and not error in the file

    Dear All,
    golden gate for mysql5.5 to oracle 11g,extract is Abended ,but there didn't have error in the log , And sometimes the successful extraction some records;
    extract :
    EXTRACT EXT_M1               
    TRANLOGOPTIONS AltLogDest /mydata/mysqllog/binlog/binlog.index       
    SOURCEDB [email protected]:16052, USERID mama,PASSWORD mama        
    sqlexec "set names gbk;"       
    EXTTRAIL dirdat/m1                  
    Dynamicresolution               
    TABLE mama.merchants_member_card_customer;   
    datapump:
    EXTRACT DPRD_M1  
    SOURCEDB [email protected]:16052, USERID mama,PASSWORD mama  
    RMTHOST 192.168.2.57, MGRPORT 7089, compress --COMPRESSUPDATESETWHERE
    RMTTRAIL /home/oracle/goldengate/dirdat/m1
    NOPASSTHRU  
    TABLE mama.merchants_member_card_customer;
    GGSCI>>info all
    Program     Status      Group       Lag at Chkpt  Time Since Chkpt
    MANAGER     RUNNING                                          
    EXTRACT     RUNNING     DPRD_M1     00:00:00      00:00:01   
    EXTRACT     ABENDED     EXT_M1      00:11:49      00:01:56
    REPORT:
    GGSCI>>view report ext_m1
                      Oracle GoldenGate Capture for MySQL
          Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230
    Linux, x64, 64bit (optimized), MySQL Enterprise on Apr 23 2012 05:23:34
    Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
                        Starting at 2013-09-29 18:38:08
    Operating System Version:
    Linux
    Version #1 SMP Wed Jun 13 18:24:36 EDT 2012, Release 2.6.32-279.el6.x86_64
    Node: M46
    Machine: x86_64
                             soft limit   hard limit
    Address Space Size   :    unlimited    unlimited
    Heap Size            :    unlimited    unlimited
    File Size            :    unlimited    unlimited
    CPU Time             :    unlimited    unlimited
    Process id: 6322
    Description:
    **            Running with the following parameters                  **
    2013-09-29 18:38:08  INFO    OGG-03035  Operating system character set identified as UTF-8. Locale: zh_CN, LC_ALL:.
    EXTRACT EXT_M1
    TRANLOGOPTIONS AltLogDest /mydata/mysqllog/binlog/binlog.index
    SOURCEDB [email protected]:16052, USERID mama100,PASSWORD ****************
    sqlexec "set names gbk;"
    Executing SQL statement...
    2013-09-29 18:38:08  INFO    OGG-00893  SQL statement executed successfully.
    EXTTRAIL dirdat/m1
    Dynamicresolution
    TABLE mama100.merchants_member_card_customer;
    2013-09-29 18:38:08  INFO    OGG-01815  Virtual Memory Facilities for: COM
        anon alloc: mmap(MAP_ANON)  anon free: munmap
        file alloc: mmap(MAP_SHARED)  file free: munmap
        target directories:
        /home/goldengate/dirtmp.
    CACHEMGR virtual memory values (may have been adjusted)
    CACHESIZE:                               64G
    CACHEPAGEOUTSIZE (normal):                8M
    PROCESS VM AVAIL FROM OS (min):         128G
    CACHESIZEMAX (strict force to disk):     96G
    Database Version:
    MySQL
    Server Version: 5.5.24-patch-1.0-log
    Client Version: 6.0.0
    Host Connection: 192.168.2.46 via TCP/IP
    Protocol Version: 10
    2013-09-29 18:38:08  INFO    OGG-01056  Recovery initialization completed for target file dirdat/m1000000, at RBA 1295, CSN 000086|000000065228677.
    2013-09-29 18:38:08  INFO    OGG-01478  Output file dirdat/m1 is using format RELEASE 11.2.
    2013-09-29 18:38:08  INFO    OGG-01026  Rolling over remote file dirdat/m1000000.
    2013-09-29 18:38:08  INFO    OGG-00182  VAM API running in single-threaded mode.
    2013-09-29 18:38:08  INFO    OGG-01515  Positioning to begin time 2013-9-29 06:26:18.
    **                     Run Time Messages                             **
    2013-09-29 18:38:08  INFO    OGG-01516  Positioned to Log Number: 86
        Record Offset: 65223906, 2013-9-29 06:26:18.
    2013-09-29 18:38:08  INFO    OGG-01517  Position of first record processed Log Number: 86
        Record Offset: 65223906, 2013-9-29 06:26:18.
    TABLE resolved (entry mama100.merchants_member_card_customer):
      TABLE mama100."merchants_member_card_customer";
    Using the following key columns for source table mama100.merchants_member_card_customer: id.
    2013-09-29 18:38:08  INFO    OGG-01054  Recovery completed for target file dirdat/m1000001, at RBA 1316, CSN 000086|000000065228677.
    2013-09-29 18:38:08  INFO    OGG-01057  Recovery completed for all targets.
    ggsevt:
    2013-09-29 18:38:08  INFO    OGG-00963  Oracle GoldenGate Manager for MySQL, mgr.prm:  Command received from GGSCI on host localhost (START EXTRACT EXT_M1 ).
    2013-09-29 18:38:08  INFO    OGG-00975  Oracle GoldenGate Manager for MySQL, mgr.prm:  EXTRACT EXT_M1 starting.
    2013-09-29 18:38:08  INFO    OGG-00992  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  EXTRACT EXT_M1 starting.
    2013-09-29 18:38:08  INFO    OGG-03035  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Operating system character set identified as UTF-8. Locale: zh_CN, LC_ALL:.
    2013-09-29 18:38:08  INFO    OGG-00893  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  SQL statement executed successfully.
    2013-09-29 18:38:08  INFO    OGG-01815  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Virtual Memory Facilities for: COM
        anon alloc: mmap(MAP_ANON)  anon free: munmap
        file alloc: mmap(MAP_SHARED)  file free: munmap
        target directories:
        /home/goldengate/dirtmp.
    2013-09-29 18:38:08  INFO    OGG-00993  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  EXTRACT EXT_M1 started.
    2013-09-29 18:38:08  INFO    OGG-01056  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Recovery initialization completed for target file dirdat/m1000000, at RBA 1295, CSN 000086|000000065228677.
    2013-09-29 18:38:08  INFO    OGG-01478  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Output file dirdat/m1 is using format RELEASE 11.2.
    2013-09-29 18:38:08  INFO    OGG-01026  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Rolling over remote file dirdat/m1000000.
    2013-09-29 18:38:08  INFO    OGG-00182  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  VAM API running in single-threaded mode.
    2013-09-29 18:38:08  INFO    OGG-01515  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Positioning to begin time 2013-9-29 06:26:18.
    2013-09-29 18:38:08  INFO    OGG-01516  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Positioned to Log Number: 86
        Record Offset: 65223906, 2013-9-29 06:26:18.
    2013-09-29 18:38:08  INFO    OGG-01517  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Position of first record processed Log Number: 86
        Record Offset: 65223906, 2013-9-29 06:26:18.
    2013-09-29 18:38:08  INFO    OGG-01054  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Recovery completed for target file dirdat/m1000001, at RBA 1316, CSN 000086|000000065228677.
    2013-09-29 18:38:08  INFO    OGG-01057  Oracle GoldenGate Capture for MySQL, ext_m1.prm:  Recovery completed for all targets.
    2013-09-29 18:38:09  INFO    OGG-01054  Oracle GoldenGate Capture for MySQL, dprd_m1.prm:  Recovery completed for target file /home/oracle/goldengate/dirdat/m1000002, at RBA 1435, CSN 000086|000000055512672.
    2013-09-29 18:38:09  INFO    OGG-01057  Oracle GoldenGate Capture for MySQL, dprd_m1.prm:  Recovery completed for all targets.

    GGSCI>>info ext_m1 showch
    EXTRACT    EXT_M1    Last Started 2013-09-29 18:38   Status ABENDED
    Checkpoint Lag       00:11:49 (updated 00:12:05 ago)
    VAM Read Checkpoint  2013-09-29 18:26:18.665841
    Current Checkpoint Detail:
    Read Checkpoint #1
      VAM External Interface
      Startup Checkpoint (starting position in the data source):
        Timestamp: 2013-09-29 18:26:18.665841
      Recovery Checkpoint (position of oldest unprocessed transaction in the data source):
        Timestamp: 2013-09-29 18:26:18.665841
      Current Checkpoint (position of last record read in the data source):
        Timestamp: 2013-09-29 18:26:18.665841
    Write Checkpoint #1
      GGS Log Trail
      Current Checkpoint (current write position):
        Sequence #: 0
        RBA: 917
        Timestamp: 2013-09-29 18:30:55.655570
        Extract Trail: dirdat/m1
    CSN state information:
      CRC: 20-82-1D-34
      CSN: Not available
    Header:
      Version = 2
      Record Source = A
      Type = 8
      # Input Checkpoints = 1
      # Output Checkpoints = 1
    File Information:
      Block Size = 2048
      Max Blocks = 100
      Record Length = 20480
      Current Offset = 0
    Configuration:
      Data Source = 5
      Transaction Integrity = 1
      Task Type = 0
    Status:
      Start Time = 2013-09-29 18:38:08
      Last Update Time = 2013-09-29 18:38:08
      Stop Status = A
      Last Result = 0

  • Doubt: Filters in Golden Gate Area

    Hi All,
    I'm a ODI Developer (begginer) and have doubt abt Golden Gate.
    I have the follow scenario:
    GG -> Staging Area -> Mastersaf
    Client told me to do not make filters on the first step (GG -> Staging), only at the step Staging Area -> Mastersaf.
    Is it correct (Is it a best practice)? Why?
    Regards,

    This is a common requirement / request. Basically if you have GG capturing data from some database, you want to capture everything that you might need, including in the future, rather than just getting what you know you need today. So, yes, capture everything (or rather don't filter gratuitously) and send it all to the staging area. Next week you many have another client (or a change in requirements) that asks for additional data. If you're already capturing the data, you don't have to go back to the source & modify your configuration to get the additional tables, rows or columns. Yes, it takes a little bit of extra (temporary) storage space, but disk and bandwidth are (often) cheaper than development effort, regardless of how much effort it actually is. (In many database shops, it takes much longer to do the "paperwork" to make a change on the DB server than the time it would take to make the actual change. This type of proactive policy ("capture it in case we need it") prevents that.)

  • Golden Gate and Streams

    Oracle 11.1.0.7:
    Before I ask my simple question. Is there a place I can get detailed documentation of Golden Gate? I got some documentation but that is very high level. I am looking for some document or tutorial like the ones Oracle has on tahiti.oracle.com.
    We are currently using streams and personally worked on it. I see following issues:
    1. When some errors occur in dba_apply_error it's really slow to re-execute them. Recovery is very slow
    2. Streaming the LOBs over of just 512 bytes makes the CCA very slow
    3. Manageability of scripts, configuration etc. is a headache
    4. Come accross streams bugs all the time
    From what I have read about golden gate is that is super fast and better than streams. I haven't read about it so I don't have complete comparision. Could someone with similar experience provide the insight.
    Also, if someone can please help me get right detailed documents would be really great.

    Hi,
    Think the goldengate documentation provide adequate help to install and configure oracle goldengate process. I can put down a sample configuration for you to get started.
    Installing GoldenGate and configuring a extract replicat process.
    First FTP the installation zip in binary mode from the PC to the installation directory on machine where Oracle GoldenGate suppose to be installed.
    Use gzip to decompress the file.
    gzip –d <file_name>.gz
    Extract the files
    Use tar to extract the files. All GoldenGate files will be placed in the current subdirectory.
    tar –xvf <file_name>.tar
    Create folders
    Create the required sub-directories in the installation directory by using
    Shell> cd <install location>
    Shell> ggsci
    GGSCI> create subdirs
    GGSCI> exit
    Oracle-specific installation steps
    The below steps are only required when GoldenGate will be capturing data from the server. Therefore it is only needed when you are installing GoldenGatef or Oracle as your <source> environment.
    You need to turn on supplemental logging at the database level. This command requires the ALTER DATABASE permissions.
    Shell> sqlplus <login>/<password>
    SQL> alter database add supplemental log data;
    Now Switch to the next redo log file.
    SQL> alter system switch logfile;
    SQL> exit
    Then now configure manager parameter file.
    GGSCI> EDIT PARAMS MGR
    •     Use the editor to assign a port
    --GoldenGate Manager parameter file
    PORT <port>
    example: PORT 7840
    •     To Start the Manager, issue following command
    GGSCI> START MGR
    •     To Verify that the Manager has started, issue the following command
    GGSCI> INFO MGR
    Now Configure Supplemental logging.
    By default, if not supplimentory logging enabled , only the change vectors will be logged in redo logs So inorder to get the columns required for constructing the image by replicat in target we require atleast minimum supplimentory logging enabled in database level and table level logging required for proper functioning of Oracle Goldengate Software.
    Using GGSCI, log in to the database on the <source> and turn on supplemental logging for the the tables configured for replication
    Shell> ggsci
    GGSCI> DBLOGIN USERID <login>
    GGSCI> ADD TRANDATA <owner/schema>.<table-name>
    Do this for all the tables.
    Configure change capture
    1. Add the Extract group
    Execute the following command on the <source> system to add an Extract group
    GGSCI> ADD EXTRACT <extract-name>, TRANLOG, BEGIN NOW
    Verify the results:
    GGSCI> INFO EXTRACT <extract-name>
    Create the Extract parameter file
    Execute the following commands on the <source> system.
    GGSCI> EDIT PARAM <extract-name>
    EXTRACT <extract-name>
    USERID <login>, PASSWORD <password>
    RMTHOST <target>, MGRPORT <port>
    RMTTRAIL ./dirdat/<trail id>
    TABLE <owner/schema>.<table-name>
    TABLE <owner/schema>.<table-name>
    for example
    extract testext
    userid ggs password ggs
    rmthost 172.25.25.177
    rmttrail ./dirdat/tr
    table scott.mytable;
    table scott.yourtable;
    Define the GoldenGate trail
    Execute the following command on the <source> to add the trail that will store the changes on the <target>.
    GGSCI> ADD RMTTRAIL ./dirdat/<trail id>, EXTRACT <extract-name>
    Verify the results:
    GGSCI> INFO RMTTRAIL *
    Start the capture process
    GGSCI> START EXTRACT <extract-name>
    Configure Change Delivery or replicat
    we have to do the following
    •     Set up the checkpoint table on the target system.(this is optional)
    •     Create a named group that includes the Replicat process and the checkpoint tables.
    •     Configure the Replicat group by adding parameters.
    •     Start the Replicat group.
    Now we will check how to set up the checkpoint table (this is a optional settings)
    Create a GLOBALS file on the target system
    Execute the following commands on the <target> system.
    Create and edit the GLOBALS parameter file to add the checkpoint table.
    Shell> cd <install location>
    Shell> ggsci
    GGSCI> EDIT PARAMS ./GLOBALS
    In the text editor, type:
    CHECKPOINTTABLE <owner/schema>.ggschkpt
    •     Record the checkpoint table owner and name, then save and close the file.
    Please Note: You could name the table anything you want
    •     Verify that the GLOBALS file was created in the root GoldenGate directory, and remove any file extension that was added.
    Activate the GLOBALS parameters
    For the GLOBALS configuration to take effect, you must exit the session in which
    the changes were made. Execute the following command to exit GGSCI.
    GGSCI> EXIT
    Add a Replicat checkpoint table     
    On the <target> system, execute the following commands in GGSCI:
    Shell> cd <install location>
    Shell> ggsci
    GGSCI> DBLOGIN USERID <login>, PASSWORD <password>
    GGSCI> ADD CHECKPOINTTABLE
    Configure Change Delivery
    Add the Replicat group
    Execute the following command on the <target> system to add a delivery group
    named <replicat-name>
    GGSCI> ADD REPLICAT <replicat-name>, EXTTRAIL ./dirdat/<trail id>
    Note: Refer to your Extract set up for the correct two-character <trail id>.
    Create Replicat parameter file
    Execute the following commands on the <target> system to bring up the parameter
    file in the editor.
    GGSCI> EDIT PARAM <replicat-name>
    -Type in the following parameters
    REPLICAT <replicat-name>
    USERID <login>, PASSWORD <password>
    HANDLECOLLISIONS
    ASSUMETARGETDEFS
    DISCARDFILE ./dirrpt/RORA<unique id>.DSC, PURGE
    MAP <owner/schema>.<source table-name>, TARGET <owner/schema>.<target table-name>;
    Start the Replicat process
    GGSCI> START REPLICAT <replicat-name>
    Verify the results:
    GGSCI> INFO REPLICAT <replicat-name>
    The above i scrapped is a basic extract-replication process which you can scale up once you get accustomed with this beautiful product.
    Thanks & Regards,
    Antony Joseph Jethu.

  • JDBC MS Access--- cannot extract entry with null value with data type Meta

    I'm trying to extract a data entry with null value by using JDBC. The database is MS Access.
    The question is how to extract null entry with data type memo? The following code works when the label has data type Text, but it throws sqlException when the data type is memo.
    Any advice will be appreciated! thanks!
    Following are the table description and JDBC code:
    test table has the following attributes:
    Field name Data Type
    name Text
    label Memo
    table contents:
    name label
    me null
    you gates
    Code:
    String query = "SELECT name, label FROM test where name like 'me' ";
    ResultSet rs = stmt.executeQuery(query);
    while (rs.next())
    String name = rs.getString("name");
    rs.getString("val");
    String label = rs.getString("label");
    System.out.println("\t"+name+"\t"+label);
    catch (SQLException ex)
    System.out.println(ex.getSQLState());
    System.out.println(ex.getErrorCode());
    System.out.println("in sqlexception");
    output:
    C:\Temp\SEFormExtractor>java DBTest
    yet SELECT name, label FROM test
    null
    0
    in sqlexception

    The question is how to extract null entry with data type memo?Okay, what you need to do is this:
    if (rs.getString("val") == null)
      // do something
    }This way, when it's a null value, you can check it first, and then handle it how you want, rather than getting an exception.

  • Unable to start the golden gate director service

    I installed the golden gate director on my PC. after the installation, each time I tried to start the service I had the following error in the log:
    ####<Mar 14, 2015 11:47:04 PM EDT> <Info> <Security> <Doreus-PC> <> <main> <> <> <> <1426391224856> <BEA-090905> <Disabling the CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true.>
    ####<Mar 14, 2015 11:47:05 PM EDT> <Info> <Security> <Doreus-PC> <> <main> <> <> <> <1426391225277> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG128 to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true.>
    ####<Mar 14, 2015 11:47:07 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <> <Thread-4> <> <> <> <1426391227149> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 24.51-b03 from Oracle Corporation.>
    ####<Mar 14, 2015 11:47:08 PM EDT> <Info> <Management> <Doreus-PC> <> <Thread-3> <> <> <> <1426391228725> <BEA-141107> <Version: WebLogic Server 12.1.3.0.0  Wed May 21 18:53:34 PDT 2014 1604337 >
    ####<Mar 14, 2015 11:47:24 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <> <Thread-3> <> <> <> <1426391244045> <BEA-000365> <Server state changed to STARTING.>
    ####<Mar 14, 2015 11:47:24 PM EDT> <Info> <WorkManager> <Doreus-PC> <> <Thread-3> <> <> <> <1426391244076> <BEA-002900> <Initializing self-tuning thread pool.>
    ####<Mar 14, 2015 11:47:24 PM EDT> <Info> <WorkManager> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426391244201> <BEA-002942> <CMM memory level becomes 0. Setting standby thread pool size to 256.>
    ####<Mar 14, 2015 11:47:24 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <> <Thread-3> <> <> <> <1426391244295> <BEA-000214> <WebLogic Server "localhost" version:
    WebLogic Server 12.1.3.0.0  Wed May 21 18:53:34 PDT 2014 1604337  Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved.>
    ####<Mar 14, 2015 11:47:28 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391248990> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "http" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "https" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249021> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249021> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249021> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249037> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249037> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <RJVM> <Doreus-PC> <> <Thread-4> <> <> <> <1426391249068> <BEA-000570> <Network Configuration for Channel "localhost"
    Listen Address         :7001
    Public Address         N/A
    Http Enabled         true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true ResolveDNSName Enabled     false>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Debug> <RJVM> <Doreus-PC> <> <Thread-4> <> <> <> <1426391249068> <BEA-000571> <Network Configuration Detail for Channel "localhost"
    Channel Weight         50
    Accept Backlog         300
    Login Timeout         5000ms
    Max Message Size     10000000
    Message Timeout     60s
    Idle Timeout         65s
    Tunneling Timeout     40s
    Tunneling Ping         45s>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-4> <> <> <> <1426391249162> <BEA-002609> <Channel Service initialized.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Notice> <Log Management> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426391249677> <BEA-170019> <The server log file C:\Program Files\GG_Directorgg-director\domain\servers\localhost\logs\localhost.log is opened. All server side log events will be written to this file.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Log Management> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426391249708> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Log Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391249770> <BEA-170025> <Initialized Domain Logging. Domain log events will be written to C:\Program Files\GG_Directorgg-director\domain\servers\localhost\logs/domain.log.>
    ####<Mar 14, 2015 11:47:30 PM EDT> <Info> <IIOP> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391250113> <BEA-002014> <IIOP subsystem enabled.>
    ####<Mar 14, 2015 11:47:30 PM EDT> <Info> <Diagnostics> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391250145> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Store> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251252> <BEA-280008> <Opening the persistent file store "WLS_DIAGNOSTICS" for recovery: directory=C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\store\diagnostics requestedWritePolicy="Disabled" fileLockingEnabled=true driver="wlfileio3".>
    ####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Store> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251268> <BEA-280009> <The persistent file store "WLS_DIAGNOSTICS" (8822e5ed-c5e8-462b-8828-54a740159ca9) has been opened: blockSize=512 actualWritePolicy="Disabled(single-handle-non-direct)" explicitIOEnforced=false records=0.>
    ####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251673> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= file:/dev/urandom"; Blocking Config= false; JDK version= 1.7.0_51; Operating System= Windows 7.>
    ####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251673> <BEA-141280> <Detected NON-BLOCKING java entropy configuration. This setting will provide the best performance on machines with few sources of entropy, but is less secure than a blocking entropy configuration.>
    ####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251673> <BEA-141187> <Java system properties are defined as follows:
    awt.toolkit = sun.awt.windows.WToolkit
    file.encoding = Cp1252
    file.encoding.pkg = sun.io
    file.separator = \
    java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
    java.awt.printerjob = sun.awt.windows.WPrinterJob
    java.class.path = ;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\lib\tools.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net.sf.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.wls.common.nodemanager_2.0.0.0.jar;;;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar;;C:\PROGRA~1\GG_DIR~1\domain\\config;log4j.properties;;./;
    java.class.version = 51.0
    java.endorsed.dirs = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\endorsed;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed
    java.ext.dirs = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\ext;C:\windows\Sun\Java\lib\ext
    java.home = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre
    java.io.tmpdir = C:\Users\Doreus\AppData\Local\Temp\
    java.library.path = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\windows\Sun\Java\bin;C:\windows\system32;C:\windows;;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org.apache.ant_1.9.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\modules\ORGAPA~1.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\app\Doreus\product\112~1.0\dbhome_1\BIN;C:\app\Doreus\product\112~1.0\grid\BIN;C:\PROGRA~2\COMMON~1\NETSAR~1;C:\PROGRA~1\COMMON~1\MICROS~1\WINDOW~1;C:\PROGRA~2\COMMON~1\MICROS~1\WINDOW~1;C:\Windows\System32;C:\Windows;C:\Windows\System32\wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~2\WIC4A1~1\Shared;C:\PROGRA~2\ATITEC~1\ATI.ACE\CORE-S~1;C:\devlop\APACHE~1.5\bin;C:\PROGRA~2\QUICKT~1\QTSystem\;C:\PROGRA~1\Java\JDK17~1.0_7\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32\oci920_8;.
    java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
    java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
    java.runtime.name = Java(TM) SE Runtime Environment
    java.runtime.version = 1.7.0_51-b13
    java.security.policy = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy
    java.specification.name = Java Platform API Specification
    java.specification.vendor = Oracle Corporation
    java.specification.version = 1.7
    java.vendor = Oracle Corporation
    java.vendor.url = http://java.oracle.com/
    java.vendor.url.bug = http://bugreport.sun.com/bugreport/
    java.version = 1.7.0_51
    java.vm.info = mixed mode
    java.vm.name = Java HotSpot(TM) Server VM
    java.vm.specification.name = Java Virtual Machine Specification
    java.vm.specification.vendor = Oracle Corporation
    java.vm.specification.version = 1.7
    java.vm.vendor = Oracle Corporation
    java.vm.version = 24.51-b03
    javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
    javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
    javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
    log4j.configuration = log4j.properties
    org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
    org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
    os.arch = x86
    os.name = Windows 7
    os.version = 6.1
    path.separator = ;
    platform.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver
    sun.arch.data.model = 32
    sun.boot.class.path = C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-ws.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\resources.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\rt.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\sunrsasign.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jsse.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jce.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\charsets.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jfr.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\classes
    sun.boot.library.path = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin
    sun.cpu.endian = little
    sun.desktop = windows
    sun.io.unicode.encoding = UnicodeLittle
    sun.java.command = weblogic.Server
    sun.java.launcher = SUN_STANDARD
    sun.jnu.encoding = Cp1252
    sun.management.compiler = HotSpot Tiered Compilers
    sun.os.patch.level = Service Pack 1
    user.country = US
    user.dir = C:\Program Files\GG_Directorgg-director\domain
    user.home = C:\Users\Doreus
    user.language = en
    user.name = Doreus
    user.timezone = America/New_York
    vde.home = C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\ldap
    weblogic.Name = localhost
    weblogic.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server
    weblogic.management.discover = true
    wls.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server
    .>
    ####<Mar 14, 2015 11:47:32 PM EDT> <Info> <Socket> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391252322> <BEA-000436> <Allocating 3 reader threads.>
    ####<Mar 14, 2015 11:47:32 PM EDT> <Info> <Socket> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391252400> <BEA-000446> <Native I/O enabled.>
    ####<Mar 14, 2015 11:47:32 PM EDT> <Info> <XML> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391252432> <BEA-130036> <Initializing XMLRegistry>
    ####<Mar 14, 2015 11:47:34 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391254072> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Mar 14, 2015 11:47:34 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391254852> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_JcbGU+osORALn21oxofI6LlSjKM=>
    ####<Mar 14, 2015 11:47:37 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391257800> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\ldap\XACMLRoleMapperggRealmInit.initialized, will load full LDIFT.>
    ####<Mar 14, 2015 11:47:37 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391257831> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Program Files\GG_Directorgg-director\domain\security\XACMLRoleMapperInit.ldift.>
    ####<Mar 14, 2015 11:47:38 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391258596> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Program Files\GG_Directorgg-director\domain\security\XACMLRoleMapperInit.ldift>
    ####<Mar 14, 2015 11:47:39 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391259532> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\ldap\XACMLAuthorizerggRealmInit.initialized, will load full LDIFT.>
    ####<Mar 14, 2015 11:47:39 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391259532> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\XACMLAuthorizerInit.ldift.>
    ####<Mar 14, 2015 11:47:39 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391259890> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\XACMLAuthorizerInit.ldift>
    ####<Mar 14, 2015 11:47:40 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391260702> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\ldap\DefaultCredentialMapperggRealmInit.initialized, will load full LDIFT.>
    ####<Mar 14, 2015 11:47:40 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391260702> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
    ####<Mar 14, 2015 11:47:41 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391261029> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server localhost for security realm ggRealm.>
    ####<Mar 14, 2015 11:47:41 PM EDT> <Notice> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391261029> <BEA-090082> <Security initializing using security realm ggRealm.>
    ####<Mar 14, 2015 11:47:41 PM EDT> <Critical> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391261326> <BEA-090402> <Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
    ####<Mar 14, 2015 11:47:41 PM EDT> <Critical> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261388> <BEA-000386> <Server subsystem failed. Reason: A MultiException has 8 exceptions.  They are:
    1. weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    2. java.lang.IllegalStateException: Unable to perform operation: post construct on weblogic.security.SecurityService
    3. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.jndi.internal.RemoteNamingService errors were found
    4. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.jndi.internal.RemoteNamingService
    5. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.rmi.cluster.RemoteBinderFactoryService errors were found
    6. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.rmi.cluster.RemoteBinderFactoryService
    7. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.cluster.ClusterServiceActivator errors were found
    8. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.cluster.ClusterServiceActivator
    A MultiException has 8 exceptions.  They are:
    1. weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    2. java.lang.IllegalStateException: Unable to perform operation: post construct on weblogic.security.SecurityService
    3. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.jndi.internal.RemoteNamingService errors were found
    4. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.jndi.internal.RemoteNamingService
    5. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.rmi.cluster.RemoteBinderFactoryService errors were found
    6. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.rmi.cluster.RemoteBinderFactoryService
    7. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.cluster.ClusterServiceActivator errors were found
    8. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.cluster.ClusterServiceActivator
        at org.jvnet.hk2.internal.Collector.throwIfErrors(Collector.java:88)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:269)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
    Caused By: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1017)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.postInitialize(CommonSecurityServiceManagerDelegateImpl.java:1131)
        at weblogic.security.service.SecurityServiceManager.postInitialize(SecurityServiceManager.java:943)
        at weblogic.security.SecurityService.start(SecurityService.java:159)
        at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)
        at sun.reflect.GeneratedMethodAccessor6.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)
        at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
        at weblogic.security.providers.authentication.shared.DBMSAtnLoginModuleImpl.login(DBMSAtnLoginModuleImpl.java:284)
        at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at javax.security.auth.login.LoginContext.invoke(LoginContext.java:762)
        at javax.security.auth.login.LoginContext.access$000(LoginContext.java:203)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:690)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:688)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:687)
        at javax.security.auth.login.LoginContext.login(LoginContext.java:595)
        at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:64)
        at com.sun.proxy.$Proxy32.login(Unknown Source)
        at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
        at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:64)
        at com.sun.proxy.$Proxy52.authenticate(Unknown Source)
        at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
        at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:342)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:987)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.postInitialize(CommonSecurityServiceManagerDelegateImpl.java:1131)
        at weblogic.security.service.SecurityServiceManager.postInitialize(SecurityServiceManager.java:943)
        at weblogic.security.SecurityService.start(SecurityService.java:159)
        at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)
        at sun.reflect.GeneratedMethodAccessor6.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)
        at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
    >
    ####<Mar 14, 2015 11:47:41 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261513> <BEA-000365> <Server state changed to FAILED.>
    ####<Mar 14, 2015 11:47:41 PM EDT> <Error> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261513> <BEA-000383> <A critical service failed. The server will shut itself down.>
    ####<Mar 14, 2015 11:47:41 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261528> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
    ####<Mar 14, 2015 11:47:41 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391261528> <BEA-000236> <Stopping execute threads.>
    ####<Mar 14, 2015 11:47:41 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261528> <BEA-000238> <Shutdown has completed.>
    I followed the process indicate in the link ORACLE-BASE - Reset the AdminServer Password in WebLogic 11g and 12c unfortunately I still have the same error.
    can somebody help me please.
    Thank you

    Hi,
    I follow all the steps Recover WebLogic admin password - weblogicexpert to reet the password the user weblogic and edit the boot.properties I still cannot start the weblogic service.
    here are the commands:
    1- java weblogic.security.utils.AdminAccount weblogic password123 .
    in my boot.properties I have
    username=weblogic
    password=welcome1
    I still have:
    ####<Mar 17, 2015 2:06:45 PM EDT> <Info> <Security> <Doreus-PC> <> <main> <> <> <> <1426615605777> <BEA-090905> <Disabling the CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true.>
    ####<Mar 17, 2015 2:06:46 PM EDT> <Info> <Security> <Doreus-PC> <> <main> <> <> <> <1426615606198> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG128 to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true.>
    ####<Mar 17, 2015 2:06:48 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <> <Thread-4> <> <> <> <1426615608148> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 24.51-b03 from Oracle Corporation.>
    ####<Mar 17, 2015 2:06:50 PM EDT> <Info> <Management> <Doreus-PC> <> <Thread-4> <> <> <> <1426615610473> <BEA-141107> <Version: WebLogic Server 12.1.3.0.0  Wed May 21 18:53:34 PDT 2014 1604337 >
    ####<Mar 17, 2015 2:07:06 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <> <Thread-5> <> <> <> <1426615626447> <BEA-000365> <Server state changed to STARTING.>
    ####<Mar 17, 2015 2:07:06 PM EDT> <Info> <WorkManager> <Doreus-PC> <> <Thread-5> <> <> <> <1426615626494> <BEA-002900> <Initializing self-tuning thread pool.>
    ####<Mar 17, 2015 2:07:06 PM EDT> <Info> <WorkManager> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426615626666> <BEA-002942> <CMM memory level becomes 0. Setting standby thread pool size to 256.>
    ####<Mar 17, 2015 2:07:06 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <> <Thread-5> <> <> <> <1426615626744> <BEA-000214> <WebLogic Server "localhost" version:
    WebLogic Server 12.1.3.0.0  Wed May 21 18:53:34 PDT 2014 1604337  Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "http" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "https" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631315> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631315> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631331> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631331> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631331> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <RJVM> <Doreus-PC> <> <Thread-7> <> <> <> <1426615631362> <BEA-000570> <Network Configuration for Channel "localhost"
    Listen Address         :7004
    Public Address         N/A
    Http Enabled         true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true ResolveDNSName Enabled     false>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Debug> <RJVM> <Doreus-PC> <> <Thread-7> <> <> <> <1426615631362> <BEA-000571> <Network Configuration Detail for Channel "localhost"
    Channel Weight         50
    Accept Backlog         300
    Login Timeout         5000ms
    Max Message Size     10000000
    Message Timeout     60s
    Idle Timeout         65s
    Tunneling Timeout     40s
    Tunneling Ping         45s>
    ####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-7> <> <> <> <1426615631471> <BEA-002609> <Channel Service initialized.>
    ####<Mar 17, 2015 2:07:12 PM EDT> <Notice> <Log Management> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426615632002> <BEA-170019> <The server log file C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain\servers\localhost\logs\localhost.log is opened. All server side log events will be written to this file.>
    ####<Mar 17, 2015 2:07:12 PM EDT> <Info> <Log Management> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426615632049> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Mar 17, 2015 2:07:12 PM EDT> <Info> <Log Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615632220> <BEA-170025> <Initialized Domain Logging. Domain log events will be written to C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain\servers\localhost\logs/domain.log.>
    ####<Mar 17, 2015 2:07:12 PM EDT> <Info> <Diagnostics> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615632548> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Mar 17, 2015 2:07:12 PM EDT> <Info> <IIOP> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615632704> <BEA-002014> <IIOP subsystem enabled.>
    ####<Mar 17, 2015 2:07:13 PM EDT> <Info> <Store> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615633702> <BEA-280008> <Opening the persistent file store "WLS_DIAGNOSTICS" for recovery: directory=C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain\servers\localhost\data\store\diagnostics requestedWritePolicy="Disabled" fileLockingEnabled=true driver="wlfileio3".>
    ####<Mar 17, 2015 2:07:13 PM EDT> <Info> <Store> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615633733> <BEA-280009> <The persistent file store "WLS_DIAGNOSTICS" (569e8065-ecbe-4388-8e3d-65fbc8d3bc75) has been opened: blockSize=512 actualWritePolicy="Disabled(single-handle-non-direct)" explicitIOEnforced=false records=0.>
    ####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634123> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= file:/dev/urandom"; Blocking Config= false; JDK version= 1.7.0_51; Operating System= Windows 7.>
    ####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634123> <BEA-141280> <Detected NON-BLOCKING java entropy configuration. This setting will provide the best performance on machines with few sources of entropy, but is less secure than a blocking entropy configuration.>
    ####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634139> <BEA-141187> <Java system properties are defined as follows:
    awt.toolkit = sun.awt.windows.WToolkit
    file.encoding = Cp1252
    file.encoding.pkg = sun.io
    file.separator = \
    java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
    java.awt.printerjob = sun.awt.windows.WPrinterJob
    java.class.path = ;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\lib\tools.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net.sf.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.wls.common.nodemanager_2.0.0.0.jar;;;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar;;C:\Oracle\MIDDLE~1\ORACLE~1\USER_P~1\GG_DIR~1\domain\\config;log4j.properties;;./;
    java.class.version = 51.0
    java.endorsed.dirs = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\endorsed;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed
    java.ext.dirs = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\ext;C:\windows\Sun\Java\lib\ext
    java.home = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre
    java.io.tmpdir = C:\Users\Doreus\AppData\Local\Temp\
    java.library.path = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\windows\Sun\Java\bin;C:\windows\system32;C:\windows;;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org.apache.ant_1.9.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\modules\ORGAPA~1.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\modules\ORGAPA~1.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\PROGRA~3\Oracle\Java\javapath;C:\app\Doreus\product\112~1.0\dbhome_1\BIN;C:\app\Doreus\product\112~1.0\grid\BIN;C:\PROGRA~2\COMMON~1\NETSAR~1;C:\PROGRA~1\COMMON~1\MICROS~1\WINDOW~1;C:\PROGRA~2\COMMON~1\MICROS~1\WINDOW~1;C:\Windows\System32;C:\Windows;C:\Windows\System32\wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~2\WIC4A1~1\Shared;C:\PROGRA~2\ATITEC~1\ATI.ACE\CORE-S~1;C:\devlop\APACHE~1.5\bin;C:\PROGRA~2\QUICKT~1\QTSystem\;C:\PROGRA~1\Java\JDK17~1.0_7\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32\oci920_8;.
    java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
    java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
    java.runtime.name = Java(TM) SE Runtime Environment
    java.runtime.version = 1.7.0_51-b13
    java.security.policy = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy
    java.specification.name = Java Platform API Specification
    java.specification.vendor = Oracle Corporation
    java.specification.version = 1.7
    java.vendor = Oracle Corporation
    java.vendor.url = http://java.oracle.com/
    java.vendor.url.bug = http://bugreport.sun.com/bugreport/
    java.version = 1.7.0_51
    java.vm.info = mixed mode
    java.vm.name = Java HotSpot(TM) Server VM
    java.vm.specification.name = Java Virtual Machine Specification
    java.vm.specification.vendor = Oracle Corporation
    java.vm.specification.version = 1.7
    java.vm.vendor = Oracle Corporation
    java.vm.version = 24.51-b03
    javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
    javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
    javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
    log4j.configuration = log4j.properties
    org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
    org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
    os.arch = x86
    os.name = Windows 7
    os.version = 6.1
    path.separator = ;
    platform.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver
    sun.arch.data.model = 32
    sun.boot.class.path = C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-ws.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\resources.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\rt.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\sunrsasign.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jsse.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jce.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\charsets.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jfr.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\classes
    sun.boot.library.path = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin
    sun.cpu.endian = little
    sun.desktop = windows
    sun.io.unicode.encoding = UnicodeLittle
    sun.java.command = weblogic.Server
    sun.java.launcher = SUN_STANDARD
    sun.jnu.encoding = Cp1252
    sun.management.compiler = HotSpot Tiered Compilers
    sun.os.patch.level = Service Pack 1
    user.country = US
    user.dir = C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain
    user.home = C:\Users\Doreus
    user.language = en
    user.name = Doreus
    user.timezone = America/New_York
    vde.home = C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain\servers\localhost\data\ldap
    weblogic.Name = localhost
    weblogic.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server
    weblogic.management.discover = true
    wls.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server
    .>
    ####<Mar 17, 2015 2:07:14 PM EDT> <Info> <XML> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634689> <BEA-130036> <Initializing XMLRegistry>
    ####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Socket> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634752> <BEA-000436> <Allocating 3 reader threads.>
    ####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Socket> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634799> <BEA-000446> <Native I/O enabled.>
    ####<Mar 17, 2015 2:07:16 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615636702> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Mar 17, 2015 2:07:17 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615637529> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_1iNOTK213rH9DG7MIClGFUdTrEA=>
    ####<Mar 17, 2015 2:07:21 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615641070> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<Mar 17, 2015 2:07:22 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615642521> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Mar 17, 2015 2:07:22 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615642786> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Mar 17, 2015 2:07:23 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615643098> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server localhost for security realm ggRealm.>
    ####<Mar 17, 2015 2:07:23 PM EDT> <Notice> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615643098> <BEA-090082> <Security initializing using security realm ggRealm.>
    ####<Mar 17, 2015 2:07:23 PM EDT> <Critical> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615643363> <BEA-090402> <Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
    ####<Mar 17, 2015 2:07:23 PM EDT> <Critical> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643410> <BEA-000386> <Server subsystem failed. Reason: A MultiException has 6 exceptions.  They are:
    1. weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    2. java.lang.IllegalStateException: Unable to perform operation: post construct on weblogic.security.SecurityService
    3. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.jndi.internal.RemoteNamingService errors were found
    4. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.jndi.internal.RemoteNamingService
    5. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.cluster.migration.MigrationService errors were found
    6. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.cluster.migration.MigrationService
    A MultiException has 6 exceptions.  They are:
    1. weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    2. java.lang.IllegalStateException: Unable to perform operation: post construct on weblogic.security.SecurityService
    3. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.jndi.internal.RemoteNamingService errors were found
    4. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.jndi.internal.RemoteNamingService
    5. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.cluster.migration.MigrationService errors were found
    6. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.cluster.migration.MigrationService
        at org.jvnet.hk2.internal.Collector.throwIfErrors(Collector.java:88)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:269)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$UpOneLevel.run(CurrentTaskFuture.java:753)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
    Caused By: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1017)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.postInitialize(CommonSecurityServiceManagerDelegateImpl.java:1131)
        at weblogic.security.service.SecurityServiceManager.postInitialize(SecurityServiceManager.java:943)
        at weblogic.security.SecurityService.start(SecurityService.java:159)
        at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)
        at sun.reflect.GeneratedMethodAccessor6.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)
        at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$UpOneLevel.run(CurrentTaskFuture.java:753)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
        at weblogic.security.providers.authentication.shared.DBMSAtnLoginModuleImpl.login(DBMSAtnLoginModuleImpl.java:284)
        at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at javax.security.auth.login.LoginContext.invoke(LoginContext.java:762)
        at javax.security.auth.login.LoginContext.access$000(LoginContext.java:203)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:690)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:688)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:687)
        at javax.security.auth.login.LoginContext.login(LoginContext.java:595)
        at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:64)
        at com.sun.proxy.$Proxy32.login(Unknown Source)
        at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
        at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:64)
        at com.sun.proxy.$Proxy52.authenticate(Unknown Source)
        at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
        at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:342)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:987)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.postInitialize(CommonSecurityServiceManagerDelegateImpl.java:1131)
        at weblogic.security.service.SecurityServiceManager.postInitialize(SecurityServiceManager.java:943)
        at weblogic.security.SecurityService.start(SecurityService.java:159)
        at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)
        at sun.reflect.GeneratedMethodAccessor6.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)
        at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
        at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
        at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
        at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
        at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
        at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
        at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
        at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
        at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
        at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
        at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$UpOneLevel.run(CurrentTaskFuture.java:753)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
    >
    ####<Mar 17, 2015 2:07:23 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643519> <BEA-000365> <Server state changed to FAILED.>
    ####<Mar 17, 2015 2:07:23 PM EDT> <Error> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643550> <BEA-000383> <A critical service failed. The server will shut itself down.>
    ####<Mar 17, 2015 2:07:23 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643550> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
    ####<Mar 17, 2015 2:07:23 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615643550> <BEA-000236> <Stopping execute threads.>
    ####<Mar 17, 2015 2:07:23 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643566> <BEA-000238> <Shutdown has completed.>

  • Need Help on Joining multiple tables in Golden Gate

    Hi,
    Can you please help me with some examples on joining multiple tables in Golden Gate. i.e, my requirement is to Join Table 1 & Table 2 in Source and Load it in Target with 10 fields from Table 1 & 5 fields from Table 2 based on the join condition between Table 1.key = Table2.key
    I have been trying to do that using SQLEXEC command in Golden Gate. But, is there a way I can do this in the Extract parameter file?
    Thanks for your time
    Regards
    Suresh

    Hi,
    Thanks a lot for the prompt reply. I am able to do that for the below scenario
    Source.T1.Field1
    Source.T1.Field2
    Source.T2.Field1
    Source.T2.Field2
    Target Table
    T1.Field1, T1.Field2, T2.Field1, T2.Field2.
    But, if I already have T2.Field1 in T1 table, then T1.Field1 takes the precendence and getting loaded. i.e., I wanted to join the table 1 & Table 2 and based on the matching condition, I will need to populate the data either from T1 or T2.
    Hope you got my requirement.
    Below the Data Dump file & Replicat File.
    EXTRACT dpump
    USERID ********, PASSWORD ********
    RMTHOST *******, MGRPORT 7809
    RMTTRAIL /oracle/gg/dirdat/rt
    --PASSTHRU
    TABLE TABLE1,
    SQLEXEC (ID LOOKUP,
    QUERY "SELECT FIELD1 FROM SOURCE.TABLE2 WHERE FIELD1 = :v_field1",
    PARAMS ( v_field1 = field1 )),
    TOKENS (tk_field_1 = @GETVAL (lookup.field1));
    Replicat file
    REPLICAT repjoin
    ASSUMETARGETDEFS
    HANDLECOLLISIONS
    USERID *******, PASSWORD ********
    MAP SOURCE.T1, TARGET TARGET.GG_TABLE_T1,
    COLMAP ( USEDEFAULTS ,
    field1 = @token ("tk_party_id"));
    I eventually wanted to join like below.
    select t1.field1, t1.field2, t2.field1 from t1, t2
    where t1.field1 = t2.field1;
    Thanks for your time again
    Regards
    Suresh

  • Golden gate supports directory??

    Hello ,
    I am new to golden gate.
    i have made 1 oracle directory in oracle 11 g. when i am replicating data using golden gate, then i am getting the error-->directory doesnot exists
    -->Fatal Error executing ddl replication
    Do golden gate supports directory or not.. ?
    Thanks and regards
    Attinder Pal Singh

    Directory in what context? The are directories within the GG installation, and Oracle has directories - which are database objects that point to a directory on the file system and has nothing whatsoever to do with GG. You may happen to have the OS directory be used for GG and the same directory used by Oracle, but that means nothing in terms of them working together.
    You have an error stack, so post what it is instead of leaving people to guess which directory is missing or does not exist. Was your DDL setup successful? What is the output of the check script?

Maybe you are looking for