Golden Gate, DBFS and SUN ODM
Gents,
DBFS - way of storing files as LOBS - cool feature, no bullet proof POCs yet. POC that I worked on got .78TB/hour to load data using external table, Oracle advertised 5TB/hour.
There has been recommendation flowing around on using DBFS for storing "Golden Gate Trail/Checkpoint files"
1. As we know, golden gate files are "Transient" and needs to be deleted once redo changes are applied.
2. Assuming DBFS is setup within Exadata (storage servers, lets say 14-FULL RACK).
3. ASM will do its own job of managing (striping and mirroring)
??Questions??
A. What is the advantage of using DBFS on Exadata shared servers than storing shared NFS, to me, Golden gate files are transient and it will be waste of shared storage and performance impact due to ASM overhead of managing transient files on Exadata boxes?
B. If we decide to store Golden Gate files on exadata, can we just store them on shared exadata server as regular files ?
C. ASM specific, can we just conditionally bypass stripping and mirroring for "Golden Gate Transient Files"?
D. ACFS Vs DBFS, why DBFS is better than ACFS ? (requirement specific question assuming I just want to store transient files for a period of time)
Thanks
-Dhaval
munno wrote:
ASM Clustered File System is supported on SUN ODM unless somebody comments on how ACFS is different than what Oracle says below.
http://www.oracle.com/technology/products/bi/db/exadata/pdf/exadata-technical-whitepaper.pdf
Please look into this pdf, page number 11.
Here is the text from page 11
Oracle Automatic Storage Management (ASM) is used as the file system and volume manager for
Exadata. ASM virtualizes the storage resources and provides the advanced volume management
and file system capabilities of Exadata. Striping database files evenly across the available Exadata
cells and disks results in uniform I/O load across all the storage hardware. The ability of ASM to
perform non-intrusive resource allocation, and reallocation, is a key enabler of the shared grid
storage capabilities of Exadata environments.
"Automatic Storage Management (ASM) != ASM Cluster File System (ACFS)
That's the difference. Exadata uses ASM, but it does not support ACFS, only DBFS.
Regards,
Greg Rahn
http://structureddata.org
Similar Messages
-
Golden gate extract and replicate process are not running.
All,
I am trying replicate data between two oracle databases using golden gate.
I am trying this scenario in a single machine(two databases and golden gate are on same windows machine)
1. I have two databases PROD, UAT both are running on 11.2 oracle home.
2. Created the ggate user both the databases, and enabled supplemental logging.
3. Ran the following scripts in both databases.
SQL> @marker_setup.sql
SQL> @ddl_setup.sql
SQL> @role_setup.sql
SQL> grant GGS_GGSUSER_ROLE to ggate;
SQL> @ddl_enable.sql
4. Connected the source database (PROD) in ggsci prompt
GGSCI (home-c07402bbc5) 79> add extract ext1, tranlog, begin now
add exttrail C:\app\Bhanu\Goldengate\lt, extract ext1
edit params ext1
EXTRACT ext1
USERID ggate@PROD, PASSWORD 123456
RMTHOST home-c07402bbc5, MGRPORT 7840
rmttrail C:\app\Bhanu\Goldengate\lt
ddl include mapped objname bhanu.* // bhanu is a schema in PROD database.
TABLE bhanu.*;
5. Connected the target database(UAT) in ggsci prompt
add checkpointtable ggate.checkpoint
edit params ./GLOBALS
GGSCHEMA ggate
CHECKPOINTTABLE ggate.checkpoint
add replicat rep1, exttrail C:\app\Bhanu\Goldengate\Mt,checkpointtable ggate.checkpoint
edit params rep1
replicat rep1
ASSUMETARGETDEFS
userid ggate@UAT, password 123456
discardfile C:\app\Bhanu\Goldengate\rep1_discard.txt, append, megabytes 10
map bhanu.*, target kiran.*;
After that started the extract, replicat using
start extract ext1, start replicate rep1
Now the status.
GGSCI (home-c07402bbc5) 103> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:11:43
REPLICAT STOPPED REP1 00:00:00 00:21:16
Can you please help me what is wrong in my setup and why extract and replicate process are not running.
Edited by: user12178861 on Nov 19, 2011 11:22 AMThanks for your quick reply.
I have done few changes but extract, replicate process not running.
couple of points I would like to share with you regarding my setup.
1. I am using single golden date instance to replicate the data between PROD and UAT databases.
2. GGSCI (home-c07402bbc5) 1> dblogin userid ggate@PROD,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 2> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:23:29
REPLICAT STOPPED REP1 00:00:00 01:33:02
GGSCI (home-c07402bbc5) 3> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 4> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 5> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 6> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:24:10
REPLICAT STOPPED REP1 00:00:00 01:33:44
Target :
GGSCI (home-c07402bbc5) 1> dblogin ggate@UAT,PASSWORD 123456
ERROR: Unrecognized parameter (GGATE@UAT), expected USERID.
GGSCI (home-c07402bbc5) 2> dblogin userid ggate@UAT,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 5> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
ERROR: REPLICAT REP1 already exists.
GGSCI (home-c07402bbc5) 6> delete replicat rep1
Deleted REPLICAT REP1.
GGSCI (home-c07402bbc5) 7> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
REPLICAT added.
GGSCI (home-c07402bbc5) 8> edit params rep1
GGSCI (home-c07402bbc5) 9> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 10> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:29:46
REPLICAT STOPPED REP1 00:00:00 00:00:48
3. Is mandatory that I need two golden gate instances running each side ?
Thanks for spending your time on this problem. -
Golden Gate - Filter and transform update into a delete
Hi all,
I am new in GoldenGate, so even worst of not knowing how to do things is not to know if they are possible .
I have a condition for a table, and I only replicate if the insert/update meets that condition, but I also need to delete on the target if in an update it doesn't meet anymore the condition.
Is this possible, I am trying to find an example, anyone can help me.
Thanks in advance.
Best Regards,
RogérioHiee Rogério,
Consider the following example:
Source Table A
Target Table B
Structure of tables A & B
Table A
id varchar(5)
name varchar2(10)
marks number(2)
grade varchar(4)
Now any new Inserts or Updates are to be propogated from A to B, only if grade is "PASS" and delete it from the target if grade is updated to "FAIL" or marks < 40.
I assume this scenario is similar to what you are working with.
You have to create an On Insert - DML trigger on intermediate table C, which would delete rows from target table B.
Solution:
extract exta
userid ggadm@source, password ggadm
exttrail ./dirat/ext/aa
table user.A;
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
replicat repa
userid ggadm@target,password ggadm
handlecollisions
--replicats inserts or updates with grade = "PASS" into target--
getinserts
getupdates
map user.A, tagret user.B,
filter (on inserts, on updates, @if (@streq(grade = "PASS")) );
-- replicates updates with grade = "FAIL" --
-- or marks < 40 to a separate table C --
ignoreinserts
getupdates
insertupdates
handlecollisions
map user.A, tagret user.C, where (grade = "FAIL" or marks < 40);
SQLEXEC "truncate table user.c" every 1 hour
-- Frequency of truncation can be decided based on --
-- 1. AMOUNT OF REDO --
-- 2. SPACE LIMITATIONS --
-- 3. DAILY TPS -- -
Hi,
I'm looking for some info on these.
Please let me know where I can find more info on these.
• Product Roadmap (Streams being discontinued vs. golden gate now and in future)
• Product Comparison (architecture, reporting, monitoring etc)
Regards,
NarayanYou can take help from here:
http://www.oracle.com/technetwork/middleware/goldengate/overview/statement-of-direction-gg-132120.pdf
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3349335100346299316 -
Golden Gate for mysql5.5 extract is Abended,and not error in the file
Dear All,
golden gate for mysql5.5 to oracle 11g,extract is Abended ,but there didn't have error in the log , And sometimes the successful extraction some records;
extract :
EXTRACT EXT_M1
TRANLOGOPTIONS AltLogDest /mydata/mysqllog/binlog/binlog.index
SOURCEDB [email protected]:16052, USERID mama,PASSWORD mama
sqlexec "set names gbk;"
EXTTRAIL dirdat/m1
Dynamicresolution
TABLE mama.merchants_member_card_customer;
datapump:
EXTRACT DPRD_M1
SOURCEDB [email protected]:16052, USERID mama,PASSWORD mama
RMTHOST 192.168.2.57, MGRPORT 7089, compress --COMPRESSUPDATESETWHERE
RMTTRAIL /home/oracle/goldengate/dirdat/m1
NOPASSTHRU
TABLE mama.merchants_member_card_customer;
GGSCI>>info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING DPRD_M1 00:00:00 00:00:01
EXTRACT ABENDED EXT_M1 00:11:49 00:01:56
REPORT:
GGSCI>>view report ext_m1
Oracle GoldenGate Capture for MySQL
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230
Linux, x64, 64bit (optimized), MySQL Enterprise on Apr 23 2012 05:23:34
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-09-29 18:38:08
Operating System Version:
Linux
Version #1 SMP Wed Jun 13 18:24:36 EDT 2012, Release 2.6.32-279.el6.x86_64
Node: M46
Machine: x86_64
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 6322
Description:
** Running with the following parameters **
2013-09-29 18:38:08 INFO OGG-03035 Operating system character set identified as UTF-8. Locale: zh_CN, LC_ALL:.
EXTRACT EXT_M1
TRANLOGOPTIONS AltLogDest /mydata/mysqllog/binlog/binlog.index
SOURCEDB [email protected]:16052, USERID mama100,PASSWORD ****************
sqlexec "set names gbk;"
Executing SQL statement...
2013-09-29 18:38:08 INFO OGG-00893 SQL statement executed successfully.
EXTTRAIL dirdat/m1
Dynamicresolution
TABLE mama100.merchants_member_card_customer;
2013-09-29 18:38:08 INFO OGG-01815 Virtual Memory Facilities for: COM
anon alloc: mmap(MAP_ANON) anon free: munmap
file alloc: mmap(MAP_SHARED) file free: munmap
target directories:
/home/goldengate/dirtmp.
CACHEMGR virtual memory values (may have been adjusted)
CACHESIZE: 64G
CACHEPAGEOUTSIZE (normal): 8M
PROCESS VM AVAIL FROM OS (min): 128G
CACHESIZEMAX (strict force to disk): 96G
Database Version:
MySQL
Server Version: 5.5.24-patch-1.0-log
Client Version: 6.0.0
Host Connection: 192.168.2.46 via TCP/IP
Protocol Version: 10
2013-09-29 18:38:08 INFO OGG-01056 Recovery initialization completed for target file dirdat/m1000000, at RBA 1295, CSN 000086|000000065228677.
2013-09-29 18:38:08 INFO OGG-01478 Output file dirdat/m1 is using format RELEASE 11.2.
2013-09-29 18:38:08 INFO OGG-01026 Rolling over remote file dirdat/m1000000.
2013-09-29 18:38:08 INFO OGG-00182 VAM API running in single-threaded mode.
2013-09-29 18:38:08 INFO OGG-01515 Positioning to begin time 2013-9-29 06:26:18.
** Run Time Messages **
2013-09-29 18:38:08 INFO OGG-01516 Positioned to Log Number: 86
Record Offset: 65223906, 2013-9-29 06:26:18.
2013-09-29 18:38:08 INFO OGG-01517 Position of first record processed Log Number: 86
Record Offset: 65223906, 2013-9-29 06:26:18.
TABLE resolved (entry mama100.merchants_member_card_customer):
TABLE mama100."merchants_member_card_customer";
Using the following key columns for source table mama100.merchants_member_card_customer: id.
2013-09-29 18:38:08 INFO OGG-01054 Recovery completed for target file dirdat/m1000001, at RBA 1316, CSN 000086|000000065228677.
2013-09-29 18:38:08 INFO OGG-01057 Recovery completed for all targets.
ggsevt:
2013-09-29 18:38:08 INFO OGG-00963 Oracle GoldenGate Manager for MySQL, mgr.prm: Command received from GGSCI on host localhost (START EXTRACT EXT_M1 ).
2013-09-29 18:38:08 INFO OGG-00975 Oracle GoldenGate Manager for MySQL, mgr.prm: EXTRACT EXT_M1 starting.
2013-09-29 18:38:08 INFO OGG-00992 Oracle GoldenGate Capture for MySQL, ext_m1.prm: EXTRACT EXT_M1 starting.
2013-09-29 18:38:08 INFO OGG-03035 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Operating system character set identified as UTF-8. Locale: zh_CN, LC_ALL:.
2013-09-29 18:38:08 INFO OGG-00893 Oracle GoldenGate Capture for MySQL, ext_m1.prm: SQL statement executed successfully.
2013-09-29 18:38:08 INFO OGG-01815 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Virtual Memory Facilities for: COM
anon alloc: mmap(MAP_ANON) anon free: munmap
file alloc: mmap(MAP_SHARED) file free: munmap
target directories:
/home/goldengate/dirtmp.
2013-09-29 18:38:08 INFO OGG-00993 Oracle GoldenGate Capture for MySQL, ext_m1.prm: EXTRACT EXT_M1 started.
2013-09-29 18:38:08 INFO OGG-01056 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Recovery initialization completed for target file dirdat/m1000000, at RBA 1295, CSN 000086|000000065228677.
2013-09-29 18:38:08 INFO OGG-01478 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Output file dirdat/m1 is using format RELEASE 11.2.
2013-09-29 18:38:08 INFO OGG-01026 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Rolling over remote file dirdat/m1000000.
2013-09-29 18:38:08 INFO OGG-00182 Oracle GoldenGate Capture for MySQL, ext_m1.prm: VAM API running in single-threaded mode.
2013-09-29 18:38:08 INFO OGG-01515 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Positioning to begin time 2013-9-29 06:26:18.
2013-09-29 18:38:08 INFO OGG-01516 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Positioned to Log Number: 86
Record Offset: 65223906, 2013-9-29 06:26:18.
2013-09-29 18:38:08 INFO OGG-01517 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Position of first record processed Log Number: 86
Record Offset: 65223906, 2013-9-29 06:26:18.
2013-09-29 18:38:08 INFO OGG-01054 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Recovery completed for target file dirdat/m1000001, at RBA 1316, CSN 000086|000000065228677.
2013-09-29 18:38:08 INFO OGG-01057 Oracle GoldenGate Capture for MySQL, ext_m1.prm: Recovery completed for all targets.
2013-09-29 18:38:09 INFO OGG-01054 Oracle GoldenGate Capture for MySQL, dprd_m1.prm: Recovery completed for target file /home/oracle/goldengate/dirdat/m1000002, at RBA 1435, CSN 000086|000000055512672.
2013-09-29 18:38:09 INFO OGG-01057 Oracle GoldenGate Capture for MySQL, dprd_m1.prm: Recovery completed for all targets.GGSCI>>info ext_m1 showch
EXTRACT EXT_M1 Last Started 2013-09-29 18:38 Status ABENDED
Checkpoint Lag 00:11:49 (updated 00:12:05 ago)
VAM Read Checkpoint 2013-09-29 18:26:18.665841
Current Checkpoint Detail:
Read Checkpoint #1
VAM External Interface
Startup Checkpoint (starting position in the data source):
Timestamp: 2013-09-29 18:26:18.665841
Recovery Checkpoint (position of oldest unprocessed transaction in the data source):
Timestamp: 2013-09-29 18:26:18.665841
Current Checkpoint (position of last record read in the data source):
Timestamp: 2013-09-29 18:26:18.665841
Write Checkpoint #1
GGS Log Trail
Current Checkpoint (current write position):
Sequence #: 0
RBA: 917
Timestamp: 2013-09-29 18:30:55.655570
Extract Trail: dirdat/m1
CSN state information:
CRC: 20-82-1D-34
CSN: Not available
Header:
Version = 2
Record Source = A
Type = 8
# Input Checkpoints = 1
# Output Checkpoints = 1
File Information:
Block Size = 2048
Max Blocks = 100
Record Length = 20480
Current Offset = 0
Configuration:
Data Source = 5
Transaction Integrity = 1
Task Type = 0
Status:
Start Time = 2013-09-29 18:38:08
Last Update Time = 2013-09-29 18:38:08
Stop Status = A
Last Result = 0 -
Hi, I’m wondering if there are any differences between Golden Gate replication for Oracle 10g and Oracle 9i. The reason why I’m asking is that it doesn’t seem to be any release for oracle 9i for windows, so I was thinking of using the oracle10 GG release with Oracle10g to practice replication between Oracle9 and 11gR2.
/RegardsOnly corresponding databases having corresponding GoldenGate releases can be replicated.
Oracle GoldenGate version 10 for Oracle 9i database
Oracle GoldenGate version 10 for Oracle 10g database
You cannot use "Oracle GoldenGate version 10 for Oracle 10g database" for Oracle 9i database. By doing so, you will get a library error.
Thanks. -
Golden Gate 32bit for Oracle 10g and 11g
Does oracle released Golden Gate 32bit for Oracle 10g and 11g, i could not able to find out 32bit http://edelivery.oracle.com or OTN.
Thanksnever mind, i was able to download from e-delivery.
-
Difference between Oracle Transparent Gateway and Golden Gate
Hi Guys
Could you please clear the confusion, What is the difference between Transparent gateway and Golden gate? are they same? In which situation which one to use?
Thanks in advanceuser8896122 wrote:
>
Satish Kandi said :
Transparent gateways are a cross-RDBMS "querying" mechanism
>
So you mean if an application (designed to work with oracle only ) can actually access SQL server or DB2 without any modificaton. If i am having transparent gateway on top of DB2 or SQL server ??You caught me. I should have used different words.
No. TG is a mechanism to query other RDBMS from Oracle. GG is a mechanism to have replication between any RDBMS. -
Oracle 11.1.0.7:
Before I ask my simple question. Is there a place I can get detailed documentation of Golden Gate? I got some documentation but that is very high level. I am looking for some document or tutorial like the ones Oracle has on tahiti.oracle.com.
We are currently using streams and personally worked on it. I see following issues:
1. When some errors occur in dba_apply_error it's really slow to re-execute them. Recovery is very slow
2. Streaming the LOBs over of just 512 bytes makes the CCA very slow
3. Manageability of scripts, configuration etc. is a headache
4. Come accross streams bugs all the time
From what I have read about golden gate is that is super fast and better than streams. I haven't read about it so I don't have complete comparision. Could someone with similar experience provide the insight.
Also, if someone can please help me get right detailed documents would be really great.Hi,
Think the goldengate documentation provide adequate help to install and configure oracle goldengate process. I can put down a sample configuration for you to get started.
Installing GoldenGate and configuring a extract replicat process.
First FTP the installation zip in binary mode from the PC to the installation directory on machine where Oracle GoldenGate suppose to be installed.
Use gzip to decompress the file.
gzip –d <file_name>.gz
Extract the files
Use tar to extract the files. All GoldenGate files will be placed in the current subdirectory.
tar –xvf <file_name>.tar
Create folders
Create the required sub-directories in the installation directory by using
Shell> cd <install location>
Shell> ggsci
GGSCI> create subdirs
GGSCI> exit
Oracle-specific installation steps
The below steps are only required when GoldenGate will be capturing data from the server. Therefore it is only needed when you are installing GoldenGatef or Oracle as your <source> environment.
You need to turn on supplemental logging at the database level. This command requires the ALTER DATABASE permissions.
Shell> sqlplus <login>/<password>
SQL> alter database add supplemental log data;
Now Switch to the next redo log file.
SQL> alter system switch logfile;
SQL> exit
Then now configure manager parameter file.
GGSCI> EDIT PARAMS MGR
• Use the editor to assign a port
--GoldenGate Manager parameter file
PORT <port>
example: PORT 7840
• To Start the Manager, issue following command
GGSCI> START MGR
• To Verify that the Manager has started, issue the following command
GGSCI> INFO MGR
Now Configure Supplemental logging.
By default, if not supplimentory logging enabled , only the change vectors will be logged in redo logs So inorder to get the columns required for constructing the image by replicat in target we require atleast minimum supplimentory logging enabled in database level and table level logging required for proper functioning of Oracle Goldengate Software.
Using GGSCI, log in to the database on the <source> and turn on supplemental logging for the the tables configured for replication
Shell> ggsci
GGSCI> DBLOGIN USERID <login>
GGSCI> ADD TRANDATA <owner/schema>.<table-name>
Do this for all the tables.
Configure change capture
1. Add the Extract group
Execute the following command on the <source> system to add an Extract group
GGSCI> ADD EXTRACT <extract-name>, TRANLOG, BEGIN NOW
Verify the results:
GGSCI> INFO EXTRACT <extract-name>
Create the Extract parameter file
Execute the following commands on the <source> system.
GGSCI> EDIT PARAM <extract-name>
EXTRACT <extract-name>
USERID <login>, PASSWORD <password>
RMTHOST <target>, MGRPORT <port>
RMTTRAIL ./dirdat/<trail id>
TABLE <owner/schema>.<table-name>
TABLE <owner/schema>.<table-name>
for example
extract testext
userid ggs password ggs
rmthost 172.25.25.177
rmttrail ./dirdat/tr
table scott.mytable;
table scott.yourtable;
Define the GoldenGate trail
Execute the following command on the <source> to add the trail that will store the changes on the <target>.
GGSCI> ADD RMTTRAIL ./dirdat/<trail id>, EXTRACT <extract-name>
Verify the results:
GGSCI> INFO RMTTRAIL *
Start the capture process
GGSCI> START EXTRACT <extract-name>
Configure Change Delivery or replicat
we have to do the following
• Set up the checkpoint table on the target system.(this is optional)
• Create a named group that includes the Replicat process and the checkpoint tables.
• Configure the Replicat group by adding parameters.
• Start the Replicat group.
Now we will check how to set up the checkpoint table (this is a optional settings)
Create a GLOBALS file on the target system
Execute the following commands on the <target> system.
Create and edit the GLOBALS parameter file to add the checkpoint table.
Shell> cd <install location>
Shell> ggsci
GGSCI> EDIT PARAMS ./GLOBALS
In the text editor, type:
CHECKPOINTTABLE <owner/schema>.ggschkpt
• Record the checkpoint table owner and name, then save and close the file.
Please Note: You could name the table anything you want
• Verify that the GLOBALS file was created in the root GoldenGate directory, and remove any file extension that was added.
Activate the GLOBALS parameters
For the GLOBALS configuration to take effect, you must exit the session in which
the changes were made. Execute the following command to exit GGSCI.
GGSCI> EXIT
Add a Replicat checkpoint table
On the <target> system, execute the following commands in GGSCI:
Shell> cd <install location>
Shell> ggsci
GGSCI> DBLOGIN USERID <login>, PASSWORD <password>
GGSCI> ADD CHECKPOINTTABLE
Configure Change Delivery
Add the Replicat group
Execute the following command on the <target> system to add a delivery group
named <replicat-name>
GGSCI> ADD REPLICAT <replicat-name>, EXTTRAIL ./dirdat/<trail id>
Note: Refer to your Extract set up for the correct two-character <trail id>.
Create Replicat parameter file
Execute the following commands on the <target> system to bring up the parameter
file in the editor.
GGSCI> EDIT PARAM <replicat-name>
-Type in the following parameters
REPLICAT <replicat-name>
USERID <login>, PASSWORD <password>
HANDLECOLLISIONS
ASSUMETARGETDEFS
DISCARDFILE ./dirrpt/RORA<unique id>.DSC, PURGE
MAP <owner/schema>.<source table-name>, TARGET <owner/schema>.<target table-name>;
Start the Replicat process
GGSCI> START REPLICAT <replicat-name>
Verify the results:
GGSCI> INFO REPLICAT <replicat-name>
The above i scrapped is a basic extract-replication process which you can scale up once you get accustomed with this beautiful product.
Thanks & Regards,
Antony Joseph Jethu. -
Does Golden Gate provide any Webservices to start and stop services?
Hi all,
We are trying to use GG in our application. But we need a way to start and stop services from java code.
Is there any Webservice interface or API to start and stop Golden gate services like GG manager, extract and replicat processes??
Thanks in advance for your help.
Yamini.You can control this at a database level using EVENTACTIONS parameter.
Create a table at source & target called "EVENT" with field EVENT_TYPE ( example names only - please call it what you like ) .
at Replicat config actions based on the data passed into the EVENT_TYPE column
MAP GG_ADM.EVENT TARGET GG_ADM.EVENT, &
FILTER ( (@STREQ(@IF(@COLTEST(EVENT_TYPE,PRESENT),EVENT_TYPE,"No EVENT"),"STOP") = 1)), &
EVENTACTIONS (IGNORE , LOG,STOP);
You'll need a seperate replicat to handle the start
MAP GG_ADM.EVENT TARGET GG_ADM.EVENT, &
FILTER ( (@STREQ(@IF(@COLTEST(EVENT_TYPE,PRESENT),EVENT_TYPE,"No EVENT"),"START_APP_02") = 1)), &
EVENTACTIONS ((SHELL (${GG_HOME}/diroby/start.ksh R1APP_02 )));
Hope that helps -
Difference b/w oracle golden gate and odi
Hi Friends,
i am new to odi,i want to know the exact difference b/w ODI AND OGG
please share your knowledge
Regards
sateeshSounds like a great question for the Data Integrator or Golden Gate forums; not so great for the JDeveloper/ADF forum, unfortunately.
-
Golden Gate 10.4.0 for Oracle 11g on Windows 2000, XP and 2003
Hello,
I am looking for Oracle Golden gate 10.4 for my demo/poc. Is this available for download from oracle.
I could not find the OGG 10, if any one has the link, please let me know.
Thanks,Have you looked in Edelivery?
Oracle Fusion Middleware, Windows 32-bit, media pack for GoldenGate (at the bottom of the page), then pick the release for Oracle 10g or 11g
https://edelivery.oracle.com -
Unable to start the golden gate director service
I installed the golden gate director on my PC. after the installation, each time I tried to start the service I had the following error in the log:
####<Mar 14, 2015 11:47:04 PM EDT> <Info> <Security> <Doreus-PC> <> <main> <> <> <> <1426391224856> <BEA-090905> <Disabling the CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true.>
####<Mar 14, 2015 11:47:05 PM EDT> <Info> <Security> <Doreus-PC> <> <main> <> <> <> <1426391225277> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG128 to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true.>
####<Mar 14, 2015 11:47:07 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <> <Thread-4> <> <> <> <1426391227149> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 24.51-b03 from Oracle Corporation.>
####<Mar 14, 2015 11:47:08 PM EDT> <Info> <Management> <Doreus-PC> <> <Thread-3> <> <> <> <1426391228725> <BEA-141107> <Version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 >
####<Mar 14, 2015 11:47:24 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <> <Thread-3> <> <> <> <1426391244045> <BEA-000365> <Server state changed to STARTING.>
####<Mar 14, 2015 11:47:24 PM EDT> <Info> <WorkManager> <Doreus-PC> <> <Thread-3> <> <> <> <1426391244076> <BEA-002900> <Initializing self-tuning thread pool.>
####<Mar 14, 2015 11:47:24 PM EDT> <Info> <WorkManager> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426391244201> <BEA-002942> <CMM memory level becomes 0. Setting standby thread pool size to 256.>
####<Mar 14, 2015 11:47:24 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <> <Thread-3> <> <> <> <1426391244295> <BEA-000214> <WebLogic Server "localhost" version:
WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved.>
####<Mar 14, 2015 11:47:28 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391248990> <BEA-002622> <The protocol "t3" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "t3s" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "http" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "https" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "iiop" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "iiops" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "ldap" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249006> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249021> <BEA-002622> <The protocol "cluster" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249021> <BEA-002622> <The protocol "clusters" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249021> <BEA-002622> <The protocol "snmp" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249037> <BEA-002622> <The protocol "admin" is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-6> <> <> <> <1426391249037> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <RJVM> <Doreus-PC> <> <Thread-4> <> <> <> <1426391249068> <BEA-000570> <Network Configuration for Channel "localhost"
Listen Address :7001
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true ResolveDNSName Enabled false>
####<Mar 14, 2015 11:47:29 PM EDT> <Debug> <RJVM> <Doreus-PC> <> <Thread-4> <> <> <> <1426391249068> <BEA-000571> <Network Configuration Detail for Channel "localhost"
Channel Weight 50
Accept Backlog 300
Login Timeout 5000ms
Max Message Size 10000000
Message Timeout 60s
Idle Timeout 65s
Tunneling Timeout 40s
Tunneling Ping 45s>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-4> <> <> <> <1426391249162> <BEA-002609> <Channel Service initialized.>
####<Mar 14, 2015 11:47:29 PM EDT> <Notice> <Log Management> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426391249677> <BEA-170019> <The server log file C:\Program Files\GG_Directorgg-director\domain\servers\localhost\logs\localhost.log is opened. All server side log events will be written to this file.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Log Management> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426391249708> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Mar 14, 2015 11:47:29 PM EDT> <Info> <Log Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391249770> <BEA-170025> <Initialized Domain Logging. Domain log events will be written to C:\Program Files\GG_Directorgg-director\domain\servers\localhost\logs/domain.log.>
####<Mar 14, 2015 11:47:30 PM EDT> <Info> <IIOP> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391250113> <BEA-002014> <IIOP subsystem enabled.>
####<Mar 14, 2015 11:47:30 PM EDT> <Info> <Diagnostics> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391250145> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Store> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251252> <BEA-280008> <Opening the persistent file store "WLS_DIAGNOSTICS" for recovery: directory=C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\store\diagnostics requestedWritePolicy="Disabled" fileLockingEnabled=true driver="wlfileio3".>
####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Store> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251268> <BEA-280009> <The persistent file store "WLS_DIAGNOSTICS" (8822e5ed-c5e8-462b-8828-54a740159ca9) has been opened: blockSize=512 actualWritePolicy="Disabled(single-handle-non-direct)" explicitIOEnforced=false records=0.>
####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251673> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= file:/dev/urandom"; Blocking Config= false; JDK version= 1.7.0_51; Operating System= Windows 7.>
####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251673> <BEA-141280> <Detected NON-BLOCKING java entropy configuration. This setting will provide the best performance on machines with few sources of entropy, but is less secure than a blocking entropy configuration.>
####<Mar 14, 2015 11:47:31 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391251673> <BEA-141187> <Java system properties are defined as follows:
awt.toolkit = sun.awt.windows.WToolkit
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = ;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\lib\tools.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net.sf.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.wls.common.nodemanager_2.0.0.0.jar;;;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar;;C:\PROGRA~1\GG_DIR~1\domain\\config;log4j.properties;;./;
java.class.version = 51.0
java.endorsed.dirs = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\endorsed;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed
java.ext.dirs = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\ext;C:\windows\Sun\Java\lib\ext
java.home = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre
java.io.tmpdir = C:\Users\Doreus\AppData\Local\Temp\
java.library.path = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\windows\Sun\Java\bin;C:\windows\system32;C:\windows;;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org.apache.ant_1.9.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\modules\ORGAPA~1.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\app\Doreus\product\112~1.0\dbhome_1\BIN;C:\app\Doreus\product\112~1.0\grid\BIN;C:\PROGRA~2\COMMON~1\NETSAR~1;C:\PROGRA~1\COMMON~1\MICROS~1\WINDOW~1;C:\PROGRA~2\COMMON~1\MICROS~1\WINDOW~1;C:\Windows\System32;C:\Windows;C:\Windows\System32\wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~2\WIC4A1~1\Shared;C:\PROGRA~2\ATITEC~1\ATI.ACE\CORE-S~1;C:\devlop\APACHE~1.5\bin;C:\PROGRA~2\QUICKT~1\QTSystem\;C:\PROGRA~1\Java\JDK17~1.0_7\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32\oci920_8;.
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = 1.7.0_51-b13
java.security.policy = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Oracle Corporation
java.specification.version = 1.7
java.vendor = Oracle Corporation
java.vendor.url = http://java.oracle.com/
java.vendor.url.bug = http://bugreport.sun.com/bugreport/
java.version = 1.7.0_51
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Server VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Oracle Corporation
java.vm.specification.version = 1.7
java.vm.vendor = Oracle Corporation
java.vm.version = 24.51-b03
javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
log4j.configuration = log4j.properties
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
os.arch = x86
os.name = Windows 7
os.version = 6.1
path.separator = ;
platform.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver
sun.arch.data.model = 32
sun.boot.class.path = C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-ws.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\resources.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\rt.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\sunrsasign.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jsse.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jce.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\charsets.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jfr.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\classes
sun.boot.library.path = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin
sun.cpu.endian = little
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.command = weblogic.Server
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Tiered Compilers
sun.os.patch.level = Service Pack 1
user.country = US
user.dir = C:\Program Files\GG_Directorgg-director\domain
user.home = C:\Users\Doreus
user.language = en
user.name = Doreus
user.timezone = America/New_York
vde.home = C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\ldap
weblogic.Name = localhost
weblogic.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server
weblogic.management.discover = true
wls.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server
.>
####<Mar 14, 2015 11:47:32 PM EDT> <Info> <Socket> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391252322> <BEA-000436> <Allocating 3 reader threads.>
####<Mar 14, 2015 11:47:32 PM EDT> <Info> <Socket> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391252400> <BEA-000446> <Native I/O enabled.>
####<Mar 14, 2015 11:47:32 PM EDT> <Info> <XML> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391252432> <BEA-130036> <Initializing XMLRegistry>
####<Mar 14, 2015 11:47:34 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391254072> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Mar 14, 2015 11:47:34 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391254852> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_JcbGU+osORALn21oxofI6LlSjKM=>
####<Mar 14, 2015 11:47:37 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391257800> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\ldap\XACMLRoleMapperggRealmInit.initialized, will load full LDIFT.>
####<Mar 14, 2015 11:47:37 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391257831> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Program Files\GG_Directorgg-director\domain\security\XACMLRoleMapperInit.ldift.>
####<Mar 14, 2015 11:47:38 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391258596> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Program Files\GG_Directorgg-director\domain\security\XACMLRoleMapperInit.ldift>
####<Mar 14, 2015 11:47:39 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391259532> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\ldap\XACMLAuthorizerggRealmInit.initialized, will load full LDIFT.>
####<Mar 14, 2015 11:47:39 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391259532> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\XACMLAuthorizerInit.ldift.>
####<Mar 14, 2015 11:47:39 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391259890> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\XACMLAuthorizerInit.ldift>
####<Mar 14, 2015 11:47:40 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391260702> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Program Files\GG_Directorgg-director\domain\servers\localhost\data\ldap\DefaultCredentialMapperggRealmInit.initialized, will load full LDIFT.>
####<Mar 14, 2015 11:47:40 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391260702> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Mar 14, 2015 11:47:41 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391261029> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server localhost for security realm ggRealm.>
####<Mar 14, 2015 11:47:41 PM EDT> <Notice> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391261029> <BEA-090082> <Security initializing using security realm ggRealm.>
####<Mar 14, 2015 11:47:41 PM EDT> <Critical> <Security> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391261326> <BEA-090402> <Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
####<Mar 14, 2015 11:47:41 PM EDT> <Critical> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261388> <BEA-000386> <Server subsystem failed. Reason: A MultiException has 8 exceptions. They are:
1. weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
2. java.lang.IllegalStateException: Unable to perform operation: post construct on weblogic.security.SecurityService
3. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.jndi.internal.RemoteNamingService errors were found
4. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.jndi.internal.RemoteNamingService
5. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.rmi.cluster.RemoteBinderFactoryService errors were found
6. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.rmi.cluster.RemoteBinderFactoryService
7. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.cluster.ClusterServiceActivator errors were found
8. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.cluster.ClusterServiceActivator
A MultiException has 8 exceptions. They are:
1. weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
2. java.lang.IllegalStateException: Unable to perform operation: post construct on weblogic.security.SecurityService
3. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.jndi.internal.RemoteNamingService errors were found
4. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.jndi.internal.RemoteNamingService
5. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.rmi.cluster.RemoteBinderFactoryService errors were found
6. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.rmi.cluster.RemoteBinderFactoryService
7. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.cluster.ClusterServiceActivator errors were found
8. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.cluster.ClusterServiceActivator
at org.jvnet.hk2.internal.Collector.throwIfErrors(Collector.java:88)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:269)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
Caused By: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1017)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.postInitialize(CommonSecurityServiceManagerDelegateImpl.java:1131)
at weblogic.security.service.SecurityServiceManager.postInitialize(SecurityServiceManager.java:943)
at weblogic.security.SecurityService.start(SecurityService.java:159)
at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)
at sun.reflect.GeneratedMethodAccessor6.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)
at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
at weblogic.security.providers.authentication.shared.DBMSAtnLoginModuleImpl.login(DBMSAtnLoginModuleImpl.java:284)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:762)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:203)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:690)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:688)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:687)
at javax.security.auth.login.LoginContext.login(LoginContext.java:595)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:64)
at com.sun.proxy.$Proxy32.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:64)
at com.sun.proxy.$Proxy52.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:342)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:987)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.postInitialize(CommonSecurityServiceManagerDelegateImpl.java:1131)
at weblogic.security.service.SecurityServiceManager.postInitialize(SecurityServiceManager.java:943)
at weblogic.security.SecurityService.start(SecurityService.java:159)
at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)
at sun.reflect.GeneratedMethodAccessor6.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)
at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
>
####<Mar 14, 2015 11:47:41 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261513> <BEA-000365> <Server state changed to FAILED.>
####<Mar 14, 2015 11:47:41 PM EDT> <Error> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261513> <BEA-000383> <A critical service failed. The server will shut itself down.>
####<Mar 14, 2015 11:47:41 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261528> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
####<Mar 14, 2015 11:47:41 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426391261528> <BEA-000236> <Stopping execute threads.>
####<Mar 14, 2015 11:47:41 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426391261528> <BEA-000238> <Shutdown has completed.>
I followed the process indicate in the link ORACLE-BASE - Reset the AdminServer Password in WebLogic 11g and 12c unfortunately I still have the same error.
can somebody help me please.
Thank youHi,
I follow all the steps Recover WebLogic admin password - weblogicexpert to reet the password the user weblogic and edit the boot.properties I still cannot start the weblogic service.
here are the commands:
1- java weblogic.security.utils.AdminAccount weblogic password123 .
in my boot.properties I have
username=weblogic
password=welcome1
I still have:
####<Mar 17, 2015 2:06:45 PM EDT> <Info> <Security> <Doreus-PC> <> <main> <> <> <> <1426615605777> <BEA-090905> <Disabling the CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true.>
####<Mar 17, 2015 2:06:46 PM EDT> <Info> <Security> <Doreus-PC> <> <main> <> <> <> <1426615606198> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG128 to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true.>
####<Mar 17, 2015 2:06:48 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <> <Thread-4> <> <> <> <1426615608148> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 24.51-b03 from Oracle Corporation.>
####<Mar 17, 2015 2:06:50 PM EDT> <Info> <Management> <Doreus-PC> <> <Thread-4> <> <> <> <1426615610473> <BEA-141107> <Version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 >
####<Mar 17, 2015 2:07:06 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <> <Thread-5> <> <> <> <1426615626447> <BEA-000365> <Server state changed to STARTING.>
####<Mar 17, 2015 2:07:06 PM EDT> <Info> <WorkManager> <Doreus-PC> <> <Thread-5> <> <> <> <1426615626494> <BEA-002900> <Initializing self-tuning thread pool.>
####<Mar 17, 2015 2:07:06 PM EDT> <Info> <WorkManager> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426615626666> <BEA-002942> <CMM memory level becomes 0. Setting standby thread pool size to 256.>
####<Mar 17, 2015 2:07:06 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <> <Thread-5> <> <> <> <1426615626744> <BEA-000214> <WebLogic Server "localhost" version:
WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "t3" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "t3s" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "http" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "https" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "iiop" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "iiops" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "ldap" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631300> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631315> <BEA-002622> <The protocol "cluster" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631315> <BEA-002622> <The protocol "clusters" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631331> <BEA-002622> <The protocol "snmp" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631331> <BEA-002622> <The protocol "admin" is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-5> <> <> <> <1426615631331> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <RJVM> <Doreus-PC> <> <Thread-7> <> <> <> <1426615631362> <BEA-000570> <Network Configuration for Channel "localhost"
Listen Address :7004
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true ResolveDNSName Enabled false>
####<Mar 17, 2015 2:07:11 PM EDT> <Debug> <RJVM> <Doreus-PC> <> <Thread-7> <> <> <> <1426615631362> <BEA-000571> <Network Configuration Detail for Channel "localhost"
Channel Weight 50
Accept Backlog 300
Login Timeout 5000ms
Max Message Size 10000000
Message Timeout 60s
Idle Timeout 65s
Tunneling Timeout 40s
Tunneling Ping 45s>
####<Mar 17, 2015 2:07:11 PM EDT> <Info> <Server> <Doreus-PC> <> <Thread-7> <> <> <> <1426615631471> <BEA-002609> <Channel Service initialized.>
####<Mar 17, 2015 2:07:12 PM EDT> <Notice> <Log Management> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426615632002> <BEA-170019> <The server log file C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain\servers\localhost\logs\localhost.log is opened. All server side log events will be written to this file.>
####<Mar 17, 2015 2:07:12 PM EDT> <Info> <Log Management> <Doreus-PC> <> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1426615632049> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Mar 17, 2015 2:07:12 PM EDT> <Info> <Log Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615632220> <BEA-170025> <Initialized Domain Logging. Domain log events will be written to C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain\servers\localhost\logs/domain.log.>
####<Mar 17, 2015 2:07:12 PM EDT> <Info> <Diagnostics> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615632548> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Mar 17, 2015 2:07:12 PM EDT> <Info> <IIOP> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615632704> <BEA-002014> <IIOP subsystem enabled.>
####<Mar 17, 2015 2:07:13 PM EDT> <Info> <Store> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615633702> <BEA-280008> <Opening the persistent file store "WLS_DIAGNOSTICS" for recovery: directory=C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain\servers\localhost\data\store\diagnostics requestedWritePolicy="Disabled" fileLockingEnabled=true driver="wlfileio3".>
####<Mar 17, 2015 2:07:13 PM EDT> <Info> <Store> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615633733> <BEA-280009> <The persistent file store "WLS_DIAGNOSTICS" (569e8065-ecbe-4388-8e3d-65fbc8d3bc75) has been opened: blockSize=512 actualWritePolicy="Disabled(single-handle-non-direct)" explicitIOEnforced=false records=0.>
####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634123> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= file:/dev/urandom"; Blocking Config= false; JDK version= 1.7.0_51; Operating System= Windows 7.>
####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634123> <BEA-141280> <Detected NON-BLOCKING java entropy configuration. This setting will provide the best performance on machines with few sources of entropy, but is less secure than a blocking entropy configuration.>
####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Management> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634139> <BEA-141187> <Java system properties are defined as follows:
awt.toolkit = sun.awt.windows.WToolkit
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = ;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\lib\tools.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net.sf.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.wls.common.nodemanager_2.0.0.0.jar;;;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar;;C:\Oracle\MIDDLE~1\ORACLE~1\USER_P~1\GG_DIR~1\domain\\config;log4j.properties;;./;
java.class.version = 51.0
java.endorsed.dirs = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\endorsed;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed
java.ext.dirs = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\ext;C:\windows\Sun\Java\lib\ext
java.home = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre
java.io.tmpdir = C:\Users\Doreus\AppData\Local\Temp\
java.library.path = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\windows\Sun\Java\bin;C:\windows\system32;C:\windows;;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org.apache.ant_1.9.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\modules\ORGAPA~1.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\modules\ORGAPA~1.2\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\bin;C:\PROGRA~3\Oracle\Java\javapath;C:\app\Doreus\product\112~1.0\dbhome_1\BIN;C:\app\Doreus\product\112~1.0\grid\BIN;C:\PROGRA~2\COMMON~1\NETSAR~1;C:\PROGRA~1\COMMON~1\MICROS~1\WINDOW~1;C:\PROGRA~2\COMMON~1\MICROS~1\WINDOW~1;C:\Windows\System32;C:\Windows;C:\Windows\System32\wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~2\WIC4A1~1\Shared;C:\PROGRA~2\ATITEC~1\ATI.ACE\CORE-S~1;C:\devlop\APACHE~1.5\bin;C:\PROGRA~2\QUICKT~1\QTSystem\;C:\PROGRA~1\Java\JDK17~1.0_7\bin;C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\32\oci920_8;.
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = 1.7.0_51-b13
java.security.policy = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Oracle Corporation
java.specification.version = 1.7
java.vendor = Oracle Corporation
java.vendor.url = http://java.oracle.com/
java.vendor.url.bug = http://bugreport.sun.com/bugreport/
java.version = 1.7.0_51
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Server VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Oracle Corporation
java.vm.specification.version = 1.7
java.vm.vendor = Oracle Corporation
java.vm.version = 24.51-b03
javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
log4j.configuration = log4j.properties
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
os.arch = x86
os.name = Windows 7
os.version = 6.1
path.separator = ;
platform.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver
sun.arch.data.model = 32
sun.boot.class.path = C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-ws.jar;C:\Oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-api.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\resources.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\rt.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\sunrsasign.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jsse.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jce.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\charsets.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\lib\jfr.jar;C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\classes
sun.boot.library.path = C:\Oracle\MIDDLE~1\ORACLE~1\ORACLE~1\jdk\jre\bin
sun.cpu.endian = little
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.command = weblogic.Server
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Tiered Compilers
sun.os.patch.level = Service Pack 1
user.country = US
user.dir = C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain
user.home = C:\Users\Doreus
user.language = en
user.name = Doreus
user.timezone = America/New_York
vde.home = C:\Oracle\Middleware\Oracle_Home\user_projects\GG_Directorgg-director\domain\servers\localhost\data\ldap
weblogic.Name = localhost
weblogic.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server
weblogic.management.discover = true
wls.home = C:\Oracle\MIDDLE~1\ORACLE~1\wlserver\server
.>
####<Mar 17, 2015 2:07:14 PM EDT> <Info> <XML> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634689> <BEA-130036> <Initializing XMLRegistry>
####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Socket> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634752> <BEA-000436> <Allocating 3 reader threads.>
####<Mar 17, 2015 2:07:14 PM EDT> <Info> <Socket> <Doreus-PC> <localhost> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615634799> <BEA-000446> <Native I/O enabled.>
####<Mar 17, 2015 2:07:16 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615636702> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Mar 17, 2015 2:07:17 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615637529> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_1iNOTK213rH9DG7MIClGFUdTrEA=>
####<Mar 17, 2015 2:07:21 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615641070> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Mar 17, 2015 2:07:22 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615642521> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Mar 17, 2015 2:07:22 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615642786> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Mar 17, 2015 2:07:23 PM EDT> <Info> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615643098> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server localhost for security realm ggRealm.>
####<Mar 17, 2015 2:07:23 PM EDT> <Notice> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615643098> <BEA-090082> <Security initializing using security realm ggRealm.>
####<Mar 17, 2015 2:07:23 PM EDT> <Critical> <Security> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615643363> <BEA-090402> <Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
####<Mar 17, 2015 2:07:23 PM EDT> <Critical> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643410> <BEA-000386> <Server subsystem failed. Reason: A MultiException has 6 exceptions. They are:
1. weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
2. java.lang.IllegalStateException: Unable to perform operation: post construct on weblogic.security.SecurityService
3. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.jndi.internal.RemoteNamingService errors were found
4. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.jndi.internal.RemoteNamingService
5. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.cluster.migration.MigrationService errors were found
6. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.cluster.migration.MigrationService
A MultiException has 6 exceptions. They are:
1. weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
2. java.lang.IllegalStateException: Unable to perform operation: post construct on weblogic.security.SecurityService
3. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.jndi.internal.RemoteNamingService errors were found
4. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.jndi.internal.RemoteNamingService
5. java.lang.IllegalArgumentException: While attempting to resolve the dependencies of weblogic.cluster.migration.MigrationService errors were found
6. java.lang.IllegalStateException: Unable to perform operation: resolve on weblogic.cluster.migration.MigrationService
at org.jvnet.hk2.internal.Collector.throwIfErrors(Collector.java:88)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:269)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$UpOneLevel.run(CurrentTaskFuture.java:753)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
Caused By: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid. The user name or password or both from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1017)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.postInitialize(CommonSecurityServiceManagerDelegateImpl.java:1131)
at weblogic.security.service.SecurityServiceManager.postInitialize(SecurityServiceManager.java:943)
at weblogic.security.SecurityService.start(SecurityService.java:159)
at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)
at sun.reflect.GeneratedMethodAccessor6.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)
at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$UpOneLevel.run(CurrentTaskFuture.java:753)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
at weblogic.security.providers.authentication.shared.DBMSAtnLoginModuleImpl.login(DBMSAtnLoginModuleImpl.java:284)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:762)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:203)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:690)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:688)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:687)
at javax.security.auth.login.LoginContext.login(LoginContext.java:595)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:64)
at com.sun.proxy.$Proxy32.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:64)
at com.sun.proxy.$Proxy52.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:342)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:987)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.postInitialize(CommonSecurityServiceManagerDelegateImpl.java:1131)
at weblogic.security.service.SecurityServiceManager.postInitialize(SecurityServiceManager.java:943)
at weblogic.security.SecurityService.start(SecurityService.java:159)
at weblogic.server.AbstractServerService.postConstruct(AbstractServerService.java:78)
at sun.reflect.GeneratedMethodAccessor6.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.glassfish.hk2.utilities.reflection.ReflectionHelper.invoke(ReflectionHelper.java:1017)
at org.jvnet.hk2.internal.ClazzCreator.postConstructMe(ClazzCreator.java:388)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:430)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceLocatorImpl.getService(ServiceLocatorImpl.java:606)
at org.jvnet.hk2.internal.ThreeThirtyResolver.resolve(ThreeThirtyResolver.java:77)
at org.jvnet.hk2.internal.ClazzCreator.resolve(ClazzCreator.java:231)
at org.jvnet.hk2.internal.ClazzCreator.resolveAllDependencies(ClazzCreator.java:254)
at org.jvnet.hk2.internal.ClazzCreator.create(ClazzCreator.java:413)
at org.jvnet.hk2.internal.SystemDescriptor.create(SystemDescriptor.java:456)
at org.glassfish.hk2.runlevel.internal.AsyncRunLevelContext.findOrCreate(AsyncRunLevelContext.java:225)
at org.glassfish.hk2.runlevel.RunLevelContext.findOrCreate(RunLevelContext.java:82)
at org.jvnet.hk2.internal.Utilities.createService(Utilities.java:2488)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:98)
at org.jvnet.hk2.internal.ServiceHandleImpl.getService(ServiceHandleImpl.java:87)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.oneJob(CurrentTaskFuture.java:1162)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$QueueRunner.run(CurrentTaskFuture.java:1147)
at org.glassfish.hk2.runlevel.internal.CurrentTaskFuture$UpOneLevel.run(CurrentTaskFuture.java:753)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:548)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)
>
####<Mar 17, 2015 2:07:23 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643519> <BEA-000365> <Server state changed to FAILED.>
####<Mar 17, 2015 2:07:23 PM EDT> <Error> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643550> <BEA-000383> <A critical service failed. The server will shut itself down.>
####<Mar 17, 2015 2:07:23 PM EDT> <Notice> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643550> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
####<Mar 17, 2015 2:07:23 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <localhost> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1426615643550> <BEA-000236> <Stopping execute threads.>
####<Mar 17, 2015 2:07:23 PM EDT> <Info> <WebLogicServer> <Doreus-PC> <localhost> <main> <<WLS Kernel>> <> <> <1426615643566> <BEA-000238> <Shutdown has completed.> -
Golden Gate Error while replicating 2 oracle databases, reason RAC
Dear All,
My RAC database and the standby database is 11gR2 on Linux.
I was configuring simple replication between RAC and standby database using Golden Gate.
When I start the extract process it does not start on the source database that is RAC, I am configuring golden gate on one node of the RAC.
Here is what I get in my log file:
2011-12-25 15:20:39 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from GGSCI on host 10.168.20.31 (START EXTRACT EXT1 ).
2011-12-25 15:20:39 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: EXTRACT EXT1 starting.
2011-12-25 15:20:39 INFO OGG-00992 Oracle GoldenGate Capture for Oracle, ext1.prm: EXTRACT EXT1 starting.
2011-12-25 15:20:39 INFO OGG-01635 Oracle GoldenGate Capture for Oracle, ext1.prm: BOUNDED RECOVERY: reset to initial or altered checkpoint.
*2011-12-25 15:20:41 WARNING OGG-01423 Oracle GoldenGate Capture for Oracle, ext1.prm: No valid default archive log destination directory found for thread 1.*
*2011-12-25 15:20:41 WARNING OGG-01423 Oracle GoldenGate Capture for Oracle, ext1.prm: No valid default archive log destination directory found for thread 2.*
2011-12-25 15:20:42 INFO OGG-00546 Oracle GoldenGate Capture for Oracle, ext1.prm: Default thread stack size: 10485760.
2011-12-25 15:20:42 ERROR OGG-00446 Oracle GoldenGate Capture for Oracle, ext1.prm: The number of Oracle redo threads (2) is not the same as the number of checkpoint threads (1). EXTRACT groups on RAC systems should be created with the THREADS parameter (e.g., ADD EXT <group name>, TRANLOG, THREADS 2, BEGIN...).
2011-12-25 15:20:42 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, ext1.prm: PROCESS ABENDING.
Kindly suggest what I have to do to fix this error.
Regards,
ImranFor more understanding of the problem here is the output of command:
view report ext1
GGSCI (racnode1) 2> view report ext1
Oracle GoldenGate Capture for Oracle
Version 11.1.1.1.2 OGGCORE_11.1.1.1.2_PLATFORMS_111004.2100
Linux, x64, 64bit (optimized), Oracle 11g on Oct 7 2011 05:37:17
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2011-12-26 10:50:37
Operating System Version:
Linux
Version #1 SMP Fri Aug 26 19:08:58 EDT 2011, Release 2.6.18-274.3.1.el5xen
Node: racnode1
Machine: x86_64
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 11430
Description:
** Running with the following parameters **
extract group
extract ext1
connection to the database
userid ggs_owner, password ******
hostname and port for trail
rmthost x.x.x.x, mgrport ****
--path and name for the trail
rmttrail /u01/app/ggs/dirdat/lt
--DDL Support
ddl include mapped objname radius_dsl.*;
--DML
table test.*;
2011-12-26 10:50:37 INFO OGG-01635 BOUNDED RECOVERY: reset to initial or altered checkpoint.
Bounded Recovery Parameter:
Options = BRRESET
BRINTERVAL = 4HOURS
BRDIR = /u01/app/ggs
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 8G
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 16G
CACHESIZEMAX (strict force to disk): 13.99G
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG environment variable specified has invalid format, default value will be used.
NLS_LANG environment variable not set, using default value AMERICAN_AMERICA.US7ASCII.
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "WE8MSWIN1252"
Warning: your NLS_LANG setting does not match database server language setting.
Please refer to user manual for more information.
2011-12-26 10:50:38 INFO OGG-00546 Default thread stack size: 10485760.
2011-12-26 10:50:38 INFO OGG-01515 Positioning to begin time Dec 26, 2011 9:35:19 AM.
Here is the output of command (From target database)
view report rep1
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1.2 OGGCORE_11.1.1.1.2_PLATFORMS_111004.2100
Linux, x64, 64bit (optimized), Oracle 11g on Oct 7 2011 05:44:59
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2011-12-25 11:24:46
Operating System Version:
Linux
Version #1 SMP Tue May 31 13:22:04 EDT 2011, Release 2.6.18-238.12.1.el5
Node: standbydb.etisalcom.private
Machine: x86_64
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 8812
Description:
** Running with the following parameters **
Replicat group
replicat rep1
--source and target definitions
ASSUMETARGETDEFS
target database login
userid ggs_owner, password ******
file for dicarded transaction
discardfile /u01/app/ggs/discard/rep1_discard.txt, append, megabytes 10
--ddl support
DDL
Specify table mapping -
map test.*, target test.*;
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG environment variable specified has invalid format, default value will be used.
NLS_LANG environment variable not set, using default value AMERICAN_AMERICA.US7ASCII.
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "WE8MSWIN1252"
Warning: your NLS_LANG setting does not match database server language setting.
Please refer to user manual for more information.
** Run Time Messages **
I have also observed that the process extract stops after few minutes. When it stops and I view the log it says:
*ERROR OGG-00446 Oracle GoldenGate Capture for Oracle, ext1.prm: error 2 (No such file or directory) opening redo log +FRA/racdb/archivelog/1_12041_763744886.dbf*
Means it is not getting the path of ASM archive log destination.
what should I do in this case, kindly help.
Regards,
Imran -
Golden Gate obey not returning.
Hello,
I am attempting to use golden gate to go from single instance 10.2.0.4 on sparc to exadata 11.2.0.3 on linux server.
When I run the obey command on the source side in golden gate, it seems to process ok, then just hangs and never returns. There is no error produced, it just sits there staring at me, mocking me! Since this is on the 10.2.0.4 side, I will provide that information first.
I believe I have installed all the gg software correctly for each server, if anyone has seen this before or if there is a bug I am unaware of, please let me know. Here is the pertinent information.
*10G Server Information:*
dssna040-(/opt/vgi/oracle/GoldenGate)->uname -a
SunOS dssna040 5.10 Generic_147440-21 sun4u sparc SUNW,Sun-Fire
*10G GoldenGate installed software:*
dssna040-(/opt/vgi/oracle/GoldenGate)->ggsci
Oracle GoldenGate Command Interpreter for Oracle
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO
Solaris, sparc, 64bit (optimized), Oracle 10g on Apr 24 2012 09:06:57
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
MGR.PRM
port 2499
--LAGREPORTMINUTES 5
--LAGINFOMINUTES 0
--LAGCRITICALSECONDS 30
PURGEOLDEXTRACTS ./dirdat/e*, USECHECKPOINTS, MINKEEPFILES 5, FREQUENCYMINUTES 60
--PURGEOLDEXTRACTS ./dirdat/t*, USECHECKPOINTS, MINKEEPFILES 5, FREQUENCYMINUTES 60
--PURGEOLDEXTRACTS ./dirdat/s*, usecheckpoints, minkeepdays 1, maxkeepdays 1
--Forces manager to restart extract, pump and replicat if they shut down
AUTORESTART ER *, RETRIES 12, WAITMINUTES 5, RESETMINUTES 60
SOURCE SIDE OBEY FILE
DBLOGIN USERID ggadmin, PASSWORD password
ADD TRANDATA stgadm.*
ADD TRANDATA dshadm.*
ADD EXTRACT e1, TRANLOG, THREADS 1, BEGIN now
ADD EXTTRAIL ./dirdat/e1, EXTRACT e1, MEGABYTES 500
ADD EXTRACT p1, EXTTRAILSOURCE ./dirdat/e1
ADD RMTTRAIL ./dirdat/t1, EXTRACT p1, MEGABYTES 500
EXTRACT FILE
extract e1
TRANLOGOPTIONS ASMUSER sys@dssna040_asm, ASMPASSWORD password, ASMBUFSIZE 28672
SETENV (ORACLE_HOME = "/opt/vgi/oracle/10.2.0.4.0/db")
USERID ggadmin@dshtst00, PASSWORD password
CACHEDIRECTORY /opt/vgi/oracle/migration_dxv1-cluster/dshtst00
EXTTRAIL ./dirdat/e1
DISCARDFILE ./dirrpt/e1.rpt, append
WILDCARDRESOLVE dynamic
table stgadm.*;
table dshadm.*;
PUMP FILE
EXTRACT p1
--RMTHOST cssna009.vanguard.com, MGRPORT 5111
RMTHOST dxv1db01.vanguard.com, MGRPORT 2499
DISCARDFILE ./dirrpt/p1.rpt, append
RMTTRAIL ./dirdat/t1
PASSTHRU
--EOFDELAYCSECS 10
--GETTRUNCATES
--REPORTCOUNT EVERY 5 minutes, rate
table stgadm.*;
table dshtst.*;You don't need to use a fully qualified back, just know that the RMTTRAIL will be relative to the target OGG installation, not the source. It seems like you're using IPv6 on your network but not a version of OGG that supports it. IPv6 support started in OGG 11.2, which you are using. And this shouldn't be an error you'd see from creating something. It just doesn't make sense.
Running the obey file will echo back each command before it runs it so you should be able to see exactly which command is hanging. And in the ggserr.log there should be something.
I'd try cutting and pasting each command from the obey to GGSCI and run them one at a time. If you're still not getting insight then I'd start ggsci in one window, in another window get the PID and truss -p PID and see what system call it does before hanging.
Good luck,
-joe
Maybe you are looking for
-
Photos won't show up in camera role & forever backups. Please help!
This has been going on for 3 months now and its really becoming a pain. The problem in itself is now a giant conundrum where I can't find a possible fix so here it goes! It all started when I noticed that when I took a photo with the built in camera
-
I need help reducing the size of my files. I have converted the pages newsletter (5.3mb) into a PDF which was really large (3.8mb), so I then converted the PDF into JPEG and got two pages both (348kb) and saved it to the desktop. Still to large so th
-
AirPlay issues on iMac (late-2012)
My devices: iMac is (Late-2012 21-inch model) - OS X 10.10.1 3rd-gen. Apple TV (2012 model) - newest software. When I using the Apple TV and try to AirPlay the movie from my iMac yesterday. I find that my iMac can not AirPlay to my Apple TV. Issues:
-
I want to connect Netweaver DataBase Server (sqlserver 2000 in my case)using jTDS driver. can anybody help me in creating a datasource in visual administrator for sql server using jTDS driver. I tried to create a datasource using jTDS in visual admi
-
I am a 'newer' apple person. I am very organized and windows saavy. My pictures (In windows) are in folders "MyPictures" in separate folders labeled the "Year". Inside the Year, it is broken down my months. Every month has either pictures or maybe on