Golden unit functionality... incomplete getting error on status..
Hello Experts,
I have created a golden unit..
when i try to test this unit I am getting the error as the "Cannot re-start a done SFC (Message 13031)"
I supposed if the unit is marked as golden unit then it bypasses the step status and we can process the unit at any stage irespective of changing in it's step status..
I have already checked the help documents which don't have much information...
I want to test the golden unit without changing the status from done is it possible..
what would be the process if not possible (then is this golden unit functionality really helpful?)
br,
Pushkar
Hello Konstantin,
In our testes we generally test the golden unit to validate that tester is working fine or not and after that we process the other SFC...
I was in perception that if we test golden unit tester will not save changes against this particular unit and ultimatly will not update any data in SAP ME.
as per the quality process we have to 1st test golden unit followed by the other unit... in in logs we can show that the golden unit was tested.. but due to the above error we need to bypass the testplan which send data to SAP ME as the status doen't get validated.
I understood from you post that we should not work with the golden unit can you guide me what we can do in the above senario.
br,
Pushkar
Similar Messages
-
Getting Error User Status DPND is active
Hi Experts,
I am getting error User Status DPND is active , during saving User Decision.
I am getting this error only If i am doing Defect recording in QE01.
Without Defect Recording there is no error ....
Plz let me know what is this error & how to resolve it ?
Warm Regards,
Dheeraj SharmaHi Dheeraj,
With Defect recording, system creates Q Notification based on the Notification type assignment to the
Inspection Type in Config step QM>QN >Defects recording
This assignment is at client level, not advisable to change
There is one more setting at Defect Class level, (You assign Defect class for Defect code while creating catalog Type 9) In defect class if you uncheck "Activate Q-Notification" in the "Next fuctions in results recording section" system will still genrate QN but will not be activated
QM>QP>Basic Data>Catalog>Define Defect class
This Notification will be Automatically closed, while UD
For existing Notifications already created while DR , you can go to QM02
Select the item created, go to Task, create new Task and Mark that task as complete, the status of the notification will change to ATCO , complete the UD after this, it will mark the QN status to NOCO and complete stock posting
Thanks
DD -
Hi All
I am new to OIM 11g R2. I am trying to create custom connector for trusted recon. The case is to migrate the users from 10g to 11g R2. The recon event is created but it is in Event Recieved status and when I re-evaluate the event, its giving error - Cause: Status of the batch is not 'Completed'.
I saw in some posts to change the recon batch size parameter to 0 and restart the server. I have done that but still I am facing the same issue.
There is no child data in the attribute mapping and user login is set as key.
Any inputs are welcome on how to get rid of this error.
Regards
VinayJ_IDM@ I am not passing any OID IT Resource as parametere. Yes I have checked but no entries were thr.
Prakash bAJIYA@ i was running Job fro Web console & didnt find any such object. it may be diff from design console.
810444@ Thanks.
Dear All,
In Web Console Job Scheduler, I had one Recon "LDAP FULL Recon" which has a property
"OIM Employee Type" which was before "Full-TYpe" i changed it to * & it worked.Now I am able to generate events.
It seems like value of Employee Type has an Issue in OID, please correct me ?
Thanks a lot for you guys contribution. -
Getting error on status symbol in service desk
Dear Expert,
In my service desk when i m using the T.Code crm_dno_monitor.On clicking on transaction data tab and after that on action tab in status symbol is coming red (incotrrectly processed) and message getting Find support team responsible ,when message created. I m new for service desk.
Kidly suggest me why its coming...
Regards
AshokDear Antony,
Thanks for your reply,I m having doubt regarding Service Desk.Our senerio is such a manner that end user will raise a issue from satellite system then message processor is forward this issue to relevant consultant .So when using the T.Code crm_dno_monitor in transaction data tab
there is Action tab (what is exact function of that tab) in this tab i m finding error. i talk to person who did service desk in our company he told taht its related to mail)So i m confused in that as i m getting six red light there as error.
Three message are coming :-
1.Find support team responsible when message is created.
2.Send message to SAP.
Please suggest me i m get confused.
Regards
Adil -
Creating function and getting error
Hi,
While trying to create a function (in PLSQL) in the account "SCOTT", I am getting the error cannot crate or replace function.
However I am able to create the same function using the "HR" account.
The tables name as well as the structure and also the tuples are same.
What could be the reason?
Chiranjib
Message was edited by:
ChiranjibCan you give the exact error message?
Are you missing any privileges?
Message was edited by:
user542366 -
How to stop spooling and get error or status of the statement
Hi All,
I am using the bellow in .sql file to generate a spool file which is called from a shell script.
The issue is whn i kill the job the .csv file is still generated and doesnt thow any error.
Could any one please let me know how to stop spooling if the script end in between or catch the status of the error and email if spooling stops in between.
Please help. Thanks
below is used in .sql
set feedback off
set term off
set trimspool on
set pagesize 0
exec dbms_output.disable
exec dbms_output.enable(40000)
set linesize 2000;
set long 2000;
WHENEVER SQLERROR EXIT 1 ROLLBACK
whenever oserror exit 1 rollback
alter session set global_names=false;
spool $HOME/data/abc.csv
select statement;
spool off;
exit
sql is called from this script:
#!/bin/ksh
status=`sqlplus -s / @$HOME/sql/extract/abc.sql `
status1=$?
if [ $status1 -ne 0 ]
then
mailx -s "Fatal - Error in Extraction process " [email protected]
fi ____________________________________
Edited by: user11942774 on 1 Mar, 2012 4:07 AMHi, dczay, and welcome to the Community,
Sign in to your Skype account via the Skype website; the link to Sign In appears at the upper right corner of the website page.
Cancel the subscription.
Please contact Skype Customer Service to explain the situation and to request a refund.
(The blue type is actually a link to the instruction related to contacting Skype Customer Service and how to request a refund.)
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
I've installed Sun ONE Studio 4 update 1 with TomCat 4.0.1
I'm trying to run a very small example servlet(code below).I've introduced CLASSPATH(for the servlet.jar) & JAVA_HOME (none of them existed in the enviroment variables).
Run tomcat.Get the sucess page.Run the HelloWorld example.ok
Run my example.Error 404.
I created inside the webapps my directory (les) and inside it the WEB-INF with the web.xml descriptor(code below as well).Compiled the Teste2.java with sucess.Inside WEB-INF also put a folder named classes with the Teste2.java
Inside \webapps\les\WEB-INF i've got: Teste2.class & web.xml
The http://localhost:8080/les/servlet/Testando [or Teste2 or Teste2.class]
gives me the "The requested resource is not avaiable"
Please help me out.This is for my school work.Thanks
Code for Teste2.java
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Teste2 extends HttpServlet {
public void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
PrintWriter out = response.getWriter();
out.println("<HTML>");
out.println("<HEAD>");
out.println("<TITLE>Servlet Testing</TITLE>");
out.println("</HEAD>");
out.println("<BODY>");
out.println("Funcionou");
out.println("</BODY>");
out.println("</HTML>");
Code for web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>Testando</servlet-name>
<servlet-class>Teste2</servlet-class>
</servlet>
</web-app>"Inside WEB-INF also put a folder named classes with the Teste2.java
Inside \webapps\les\WEB-INF i've got: Teste2.class & web.xml"
The Teste2.class file goes under \webapps\les\WEB-INF\classses. -
I am using Outlook for Mac on my MacBook Pro. All was working well until I upgraded to OS X Mountain Lion (10.8.2). Since the upgrade, some (not all) of my incoming email messages are bounced back to the sender with the message: ....Status: 5.5.0....Diagnostic-Code: smtp; 250 OK. What can I do to resume reception of all of my email?
I am using Outlook for Mac on my MacBook Pro. All was working well until I upgraded to OS X Mountain Lion (10.8.2). Since the upgrade, some (not all) of my incoming email messages are bounced back to the sender with the message: ....Status: 5.5.0....Diagnostic-Code: smtp; 250 OK. What can I do to resume reception of all of my email?
-
Getting Error Msg " System Status INCM is active (confirmation 7300012896)"
Hi ,
Whlie confirming Goods in "Confirm Goods/ Services" user is getting Error " System Status INCM is active ( confirmation 7300012896)
Can you please tell how to rectify this error message and confirm goods against PO.
Regards,
Avdhutcheck - click before doing confirmation
there many other error message thrown at bottom side
any user locked of for network / PM order order in the PO
some message will be thrown
share taht message for more help.
Muthu -
Error "No status object is available for Unknown Object " in Shopping Cart
Hi all,
We are getting error "No status object is available for <Unknown Object>" while creating shopping carts of any type .
Please suggest if any configuration setting needs to be done.
Thanks and Regards,
Navdeep MalikDear Navdeep
The error is likely caused by one or more entries in table BBP_DOCUMENT_TAB that are without objkey or guid.
did you delete some entries from SRM transaction tables?
Check table BBP_DOCUMENT_TAB entries to see any GUID which is not present in the system.
You can verify this by checking whether there is an entry in CRMD_ORDERADM_H (header) table
with GUID = <guid stored in bbp_document_tab>
Regards
Lauren -
AS2 Error: Transport status code: 403
Dear SAP experts,
Currently, our Trading Partner is sending messages to our server via HTTPS, AS2 connection.
Our Trading Partner is getting error, Transport status code: 403.
I've checked our AS2 adapter logs (SAP PI), and it says,
Error in unkown channel: (No session available) >> Error type: LOGICAL_ERROR >> Error date: 1/14/10 7:28 AM >> Description: Inbound communication from ZZ-TRADINGPARTNER to 14-8410240001002 not allowed: com.seeburger.as2.exception.AS2PluginException: Failed to get inbound configuration from DATABASE. [1/14/10 7:28 AM]
TRADINGPARTNER --> Sender ILN (Trading Partner)
8410240001002 --> Receiver ILN (SAP PI - our server)
Kindly advise where the issue resides.
Is it from Trading Partner's configuration?
Thanks very much!
GerbertoIt could be related to missing configuration at your side. Have you created the sender agreement properly? It could be problem with incorrect use of party while creation of sender agreement.
Regards,
Prateek -
Material Master Upload using Bapi getting error "****** not a valid unit of
Hi Gurus,
i am uploading material master using BAPI Material_master_save_data , where the volume and Unit of Volume is Blank, Still i am getting error as "****** not a valid unit of volume ".kindly help me to resolve the issue.Many Thanks In advance.Jurgen,
I could able to solve the issue for invalid unit Error ....Now i am getting **** unit of measure is not defined , pls check your entry or else i am getting alternate unit of mesure is same as base unit of measure .
I have used below logic for Purchase Order Unit and Base Unit of measure .
if wa_upload-unmsr EQ wa_upload-ord_uom .
bapi_mara1-base_uom = wa_upload-unmsr.
bapi_mara1-po_unit = wa_upload-ord_uom .
elseif wa_upload-unmsr NE wa_upload-ord_uom.
wa_upload-ord_uom = wa_upload-alt_uom.
bapi_mara1-po_unit = wa_upload-ord_uom.
endif.
Many Thanks for your help. -
Getting Error "Pricing Procedure could not be determined" in CRM Functional
Hi Experts,
While creating Quotation for Products, am getting error message of " Pricing Procedure could not be determined".
Kindly reply, how 2 resolve this by steps-by-steps.
Thanks..
Edited by: poorav4293 on Aug 6, 2011 12:27 PMHi,
Go to SPRO-> IMG-> Basic Functions-> pricing. Here goto second node & select determine pricing procedure.
Here check the combination....
sales org-distribution channel-doc price-cust price-pricing procedure.
Here see the corresponding pricing procedure which should be proper based on the condition types.
Thanks!
Aswith. -
Getting error using getXMLString() function
When I use the getXMLString() function I get the following error at compile time.
Error(57,23): cannot access class org.w3c.dom.Node; file org\w3c\dom\Node.class not found
I don't understand why I am getting this error or how to resolve the issue. Is there a work around ? Any help is appreciated. Below is the code.
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.PrintWriter;
import java.io.IOException;
import java.sql.*;
import oracle.jdbc.driver.*;
import oracle.xml.sql.query.OracleXMLQuery;
public class LoginServlet extends HttpServlet
private static final String CONTENT_TYPE = "text/html; charset=windows-1252";
public void init(ServletConfig config) throws ServletException
super.init(config);
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
response.setContentType(CONTENT_TYPE);
String username = request.getParameter("UserName");
String password = request.getParameter("Password");
String domain = request.getParameter("Domain");
System.out.println("going to try to connect");
try
// register the JDBC driver..
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
// Create the connection using the OCI8 driver
Connection conn =
DriverManager.getConnection("jdbc:oracle:thin:@" + domain ,username,password);
out.println("connected to database "+ domain);
String sqlString = "select * from atu_service";
//OracleXMLQuery qry = new OracleXMLQuery(conn, sqlString);
OracleXMLQuery qry = new OracleXMLQuery(conn, "select * from attrib_def ");
// Get the XML string
String str = qry.getXMLString(); // error occurs here.
// Print the XML output
out.println(str);
// Always close the query to get rid of any resources..
qry.close();
out.close();
catch(Exception e )
e.printStackTrace();You need to include the Oracle XML Parse v2 class library in JDeveloper.
-
!! Getting error while using function in where clause
Hi,
I have created a function as below
create function find_cnt(n varchar2)
return number is
cnt number;
begin
execute immediate 'select count(1) from '||n into cnt;
return nvl(cnt,0);
end;
and when running the below select
select find_cnt(object_name),object_name from user_objects where object_type='TABLE' and find_cnt(object_name)=0
I getting
ERROR:
ORA-04044: procedure, function, package, or type is not allowed here
ORA-06512: at "SCOTT.FIND_CNT", line 5
can anyone help????????
thanks
HarishIn 11g you could simply do
SQL> select table_name, trim(column_value) cnt
from user_tables, xmltable(('count(ora:view("'||table_name||'"))'))
TABLE_NAME CNT
DEPT 4
BONUS 0
SALGRADE 5
DEMO_USERS 2
DEMO_CUSTOMERS 7
DEMO_ORDERS 10
DEMO_PRODUCT_INFO 10
DEMO_ORDER_ITEMS 16
DEMO_STATES 51
DEMO_PAGE_HIERARCHY 18
TABLE1 6
TABLE2 6
CREATE$JAVA$LOB$TABLE 0
CLICKS 1
T 0
EMP 14
PLAN_TABLE 2
17 rows selected.
Maybe you are looking for
-
I can no longer listen to my favourite radio station online since I upgraded to Firefox 4.
I have been listening to Vision FM (Australia) online and also Premier Christian Radio (UK). Since I upgraded to Firefox 4 I can no longer get the streaming. Please walk me through the process so that it can be resolved. I am not very computer litera
-
Have a problem importing my photos to iphoto '11. Keep getting an error message. Tried deleting some photos from iphoto as well as my camera, but it didn't help. Can anybody tell me why this is happening?
-
Change substitution (GGB1) with FAGLFLEXA
Hi, I have to make a intercompany post, using F-30 (Post with Clearing) for vendors and F-51 for customer accounting. My intention is clearing an vendor/customer item and, in the same time to generate an other item on the new company code, but with o
-
0xE8000065
-
IOS6 fixed my WLAN issues!
Hi all! I just had to share this with you all. Since the release of iPhone 3 I have had WLAN issues (at work, at home, anywhere) resulting in WLAN getting disconnected from time to time. Recently with iOS5 on my iPhone 4 I had to manually connect to