Gone back to factory settings and now sim card not recognised
Please can someone help. My daughter just bought a 3GS from eBay on 02 network. It has been restored back to factory settings but it won't let us do anything. It is also saying no sim card installed when we put it on iTunes. Please help.
Sounds like you bought a hacked/jailbroken phone that was either re-locked to the original carrier or damaged to the point that it will no longer recognize any SIM when you restored it.
Similar Messages
-
My daughter has an iphone 3gs and it required an update. So i connected the iphone to itunes for the update and the iphone locked up . I had to reset the iphone back to factory settings and now the iphone will not activate , Please advise what i can do to get this working for her ?
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all i have on the screen is the apple logo.I have hooked the phone upto itunes but nothing is happening. What do i do? Can someone help please???
Sorry, due to the Terms of Use problems with jailbroken devices can't be discussed here.
You can only get help from those people who told you to modify the software, only they know what the jailbreak did to the firmware. -
Hello
I have an iphone 3Gs, no longer on contract and unlocked by network provider. I've tried updating the software and it has gone back to factory settings, but it's telling me that it cannot activate the phone due to activation server is unavailable. Is there anything I can do to get the phone working again?Did you get the 'Congratulations. Your iPhone is now unlocked." message?
Was your iPhone hacked or jailbroken prior to the unlock attempt?
Does the app Cydia appear on your iPhone? -
help please!
Get a SIM card. Doesn't need to be an active SIM card, but any iPhone will require reactivation after a major software update or restore and activation requires a SIM card to be present.
-
I have not used this Touch iPod for quite some time and thought I would use it for collecting email when I am out. I have wasted a lot of time trying to get this to work and now wonder if the 2nd generation is too old to send and receive email.
I am using imap on all my other devices. I use a Google domain email address. The only divice I have that will not sync is this older generation iTouch. The version without the camera. Model PB528LL. I know my email address is correct and the password works everywhere else.
-
помогите мне
You cannot activate the iPhone without the AppleID and passcode used
to originally activate it. This is a security feature in iOS 7 called Activation
Lock. There is no workaround.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515 -
I restored my iphone and now it has gone back to factory settings. How do I transfer all the purachsed items from my itunes back onto the phone?
Hello whytea4
Check out the articles below and choose the one for your computer to sync media and apps to your iPhone.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I was updating to OS5 and instead my iPhone went back to factory settings. Now the iPhone doesnt read my sim card and cannot be configured. Please help
Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?
-
My Android Galaxy S5 has locked up and gone into endless loading while trying to update to the Kitkat update. I have set it back to factory settings and tried again and it has locked up again. My phone no longer works. What else can I do?
Oh goodness,SLEEPER888. We wish you didn't have this problem while trying to complete this update.You have done quite a bit of troubleshooting on your own. If the phone update does not take, we would need to replace it with the warranty. Is it still locked up?
TamaraH_VZW
Follow us on Twitter @VZWSupport -
I had to change my settings back to factory settings. Now if I try to get a game or an app it tells me I need iOS at least 4.5. I hooked up to my pc and went to iTunes but can not find a download for any iOS. It just gives info on all they offer. Any help ????
To update to the current version (which is the only version 'signed' by Apple). connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases - you may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972 -
I have a Iphone 2 bought several years ago from the us, and used it in romania with a romanian number and in the uk. I think it was unlocked in the us by iphone. I did a stupid thing and I reset the phone to the factory settings and now I inserted a lyca sim and it says that The sim card inserted does not seem to be supported. please help me!!!
I'm assuming you're referring to the original iPhone.
More than likely, it was jailbroken or hacked to unlock it.
In the US, all of the original iPhones sold were locked to AT&T. AT&T did not offer unlocking at the time.
The best case scenario is that it has now re-locked to AT&T. Luckily, AT&T now offers unlocking. All original iPhones were sold at full retail. They were not subsidized.
Submit a request here and see if they will unlock it. https://www.att.com/deviceunlock/#/ -
I have accidentally retored my phone back to factory settings and lost my contact list, photos and all. I have retrieved my apps via itunes but is there any way to reverse this so I can get my photos and contact list back?
Some accident with all the steps and warning messages provided.
All contacts on your iPhone should be available on your computer. Not a good idea to depend on an iPhone or any cell phone alone for such important data. Photos/videos in the Camera Roll should be imported by your computer as with any other digital camera.
Contacts and photos/videos in the Camera Roll should be included with your iPhone's backup which should have been created or updated by iTunes as the first step during the restore process - unless you declined the option.
If you declined the option, the data is gone. If not, restore your iPhone again from the backup that was created or updated before the previous restore. -
Hi
Unfortunately I bought a 4s Apple to return the phone to factory settings and now I have the wrong password only I would input password.
Please can you help me.
GratefulIf you don't know the passcode but have synced with iTunes before while the passcode was set on it, you can back it up then restore it in iTunes on the last computer it was synced with.
If you haven't synced it while the passcode was set on it, or if you don't have access to the last computer it was synced with, you'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. Then restore to an existing backup if you have one; if not, you'll have to restore it as a new iPhone and start over. -
Hi
Unfortunately I bought a 4s Apple to return the phone to factory settings and now I have the wrong password only I would input password.
Please can you help me.
thanksIf you don't know the passcode but have synced with iTunes before while the passcode was set on it, you can back it up then restore it in iTunes on the last computer it was synced with.
If you haven't synced it while the passcode was set on it, or if you don't have access to the last computer it was synced with, you'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. Then restore to an existing backup if you have one; if not, you'll have to restore it as a new iPhone and start over.
Maybe you are looking for
-
Reverse a cancelled invoice document
Had a user accidentally cancel an accounting document linked to a outbound delivery following the goods issue process. Apparently, the document was put back into a queue and reprocessed, which is fine for us, but is there a way to reverse the cancell
-
Spinning beach ball, mouse tracks, screen turns to patches of lines
Spinning beach ball appears a lot, mouse leaves a wide track across screen when the computer wakes up, screen turns to lines across it, with desktop visible beneath. Really weird. Anyone have similar symptoms?
-
How to Create Positions ???? - Help me pls...
Hi, This is my first q to this forum... Im a fresh SAP HR Cons.... I have problem in Creating positions in the Recruitment Module. Following is what I have done. Im using SAP R/3 4.7 Personnel Mgmt -> Recruitment -> Workforce Reqs and Advt --> Create
-
Siri does not work to dial a number on my Iphone 5 since a digit was added to the number in Ecuador
Siri does not work to dial a number on my Iphone 5 since a digit was added to the number in Ecuador
-
Photoshop 6 auf Windows XP ???
Hallo, da ich beabsichtige mir einen neuen Rechner zuzulegen möchte ich gerne wissen, ob Photoshop 6 auch auf Windows XP stabil läuft.