Good books to have to help along with Certification and Basis Admin

Hi all,
I am planning on taking my SAP Certified Technology Associate (C_TADM51_70) I have taken all courses except one which I plan to do by the end of the year. I was wondering if there are any good books out there that will help with the certification and Basis Administration?
Also any general advice would be much appreciated on this.
Thanks for your help.

hi,
The SAP Was 700 certification is just same as was640 only the netweaver Java related question are most important. as per the syllabus you can complete it with tadm10, tadm12 and tadm51.
regards,
Gokul

Similar Messages

As good will gesture, we can help you with the upgrade for PSE 13. We would request you to place the order for Adobe Photoshop Elements 13 as an upgrade and then we will provide you the full version serial number for the same product against the new upgra

I RECIVED AN EMAIL FROM ADOBE AS : As good will gesture, we can help you with the upgrade for PSE 13. We would request you to place the order for Adobe Photoshop Elements 13 as an upgrade and then we will provide you the full version serial number for the same product against the new upgrade order" IS THIS UPGRADE FREE AND WHAT SHOULD I DO, HOW CAN I HAVE THIS UPGRADE?

Compare with on-line stores. The full version is often cheaper than Adobe's upgrade price.
See this example from Amazon, but check pricing in your own region.
http://www.amazon.com/gp/product/B00N4OLCRO/ref=s9_simh_gw_p65_d4_i2?pf_rd_m=ATVPDKIKX0DER &pf_rd_s=desktop-1&pf_rd_r=0F1GED9546928YP3PHC0&pf_rd_t=36701&pf_rd_p=1970559082&pf_rd_i=d esktop

Windows 7 on Bootcamp I am locked into a DOS screen and it is not installing. I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP

I ran bootcamp and tried to install Windows 7. I end up with a DOS screen and an unresponsive keyboard.
I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP!
My Lion is up to date.
I used the 64-bit windows disc.
Should I try parallels?

Do you have a DOS screen with a command prompt or just a blank screen?
Is your Windows 7 x64 an original MS Full Version Installation DVD?
Did Windows 7 Install Disc start?
If it did you would have had to choose the location of where to install Windows 7.
Did you select the Partition named BOOTCAMP that corresponded to the Partition Size you created in BootCamp?
Were you asked to format the Partition?
Did you format the partition to NTFS and then get an option to click NEXT and actually start the Windows 7 installation?
Do you have a wired USB keyboard and wired USB mouse?
If you actual went through the installation and restarted then here are some things to try:
First try doing a CONTROL-ALT-DELETE and see if a Windows Option Screen appears.
If you get the Screen you will have some options displayed.
You want to highlight and click TASK MANAGER which should be the bottom choice I beleive.
If Task Manager runs you will get a window showing all the processes running.
See if you can find EXPLORER.
If EXPLORER is running highlight it and go to the bottom right and click the END TASK button.
Now go to the Top Left Menu Bar.
Click FILE
In the sub menu that opens select RUN or RUN NEW TASK (Not sure which it is in Windoes 7 as I am running Windows 8)
Once RUN is selected a new window will open to CREATE NEW TASK
Type in EXPLORER and then the OK button.
If Windows 7 installed properly the Desktop should appear after a bit of time.
Your first concern is to get your keyboard running so you may have to remove and reinstall Windows using Boot Camp on the Mac Side.
Let us know how it goes..

I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks :)

I have iOS 6 on my iPhone. i have linked my contacts with facebook and yahoo, which has doubled or triplicated some of the contacts. how can i integrate them into one? please help. it is getting on my nerves. thanks

click on the contact which you want to integrate, click the edit button scroll down u will find a option called link contacts use it to link it to the duplicate contact

Pls help me with Mac and had a trial serial number problems

Hi,
I downloaded first the trial version of Photoshop, after 30 days finished but the icon still remained.
Now, when purchased a creative suite 4 Designe premium, installed, all programs are fine, just the photoshop not working, asking for serial number but when I type the right numbers, doesn`t accept.
What can I do? any idea?
to uninstall the photoshop and install again?
but if I have the other programs working and installed?

Hi,thank you, that is fine, just not so quick but I resolved the problem alone.Thanks anyway you helped me.Eva
Date: Sat, 1 Aug 2009 11:53:58 -0600
From: [email protected]
To: [email protected]
Subject: Pls help me with Mac and had a trial serial number problems
Hello, Eva. For CS4 problems, you need to ask in the Photoshop forum (this is the Photoshop Elements forum). It's here:
http://forums.adobe.com/community/photoshop/photoshop_macintosh
Good luck!
>

Can we add button in query region along with go and clear

Hi Friends,
i have a requirement as below steps-
1)i have developed search pgae by using query regiion
2) in pgae,first we have search items,go and clear(submit buttons), table region.
3)here go and clear buttons came automatically.
4) i can able to add button in front of the page and end of the page.
4) my requirement is i need to add one more button along with go and clear(here go and clear button are in between search items and table region) .
5)i am not able to add button along with go and clear.
Can any one know how to do this--
Thanks in Advance
vamshi

Hi Vamshi,
You can not create extra buttons in Standard Query region.
Alternatively you can create your custom region for the search and there you can add a button. If you don't need advanced region, you can create the custom region in place of standard one.
Anoop

Hard currency is not valuated in FAGL_FC_VAL along with local and group currency

Hi All,
I have the below system settings for FOREX revaluation. The revaluation is not happening for Hard currency along with local and group currency. The test data and other settings seams to be fine as the below mentioned workaround works perfectly for hard currency revaluation.
I would like to take your expert feedback on this issue to confirm whether this is how SAP works or its an issue with FAGL_FC_VAL program.
System Settings:
Currencies in company code
local currency      group currency      hard currency
10                             30                         40
USD                          USD                    UYU
FOREX settings:
Work around found:
Define two Valuation area, say
1. Valuation Area: A1 which will have currency type 10 and 30.
2. Valuation Area: A2 which will have only the currency type 40.
3. Run FAGL_FC_VAL twice for these area.
Issue with this work around:
1. The valuation area is assigned to one accounting principle (which is in turn assigned to a specific ledger).
2. Thus, if I have different accounting FOREX process to be followed in different ledgers (say IFRS ledger, Local Ledger, Tax ledger) then I need to create 2 valuation area (as per above workaround) for each ledgers and run FAGL_FC_VAL for each of these valuation areas.
Thanks & Regards
Nikhil Kothari

Hi Experts,
Any views on the above issue?
Thanks & Regards
Nikhil Kothari

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have a BTHome Hub3 with infinity and used to use my TC wirelessly, I can't seem to get it to stay connected revert to my original back up

I have a BTHome Hub3 with infinity and used to use my TC wirelessly. Since I changed I cannot get my TC to stay connected, nor can I access the previously stored backups or files I had stored on it. I don't want to use an Earthnet cable. I can't get it to connect or stay connected to my MacMini either.

HELP ME PLEASE!!

I have an exising account with itunes and am trying to access my account,i am getting an error message 5002,what do i do?

I have an existing account with itunes and am trying to access my account but i am getting error messege 5002.How do i solve this issue had no problems yeterday opening my account,please help.

The iPhoto library is also installed on the cloud drive and I am trying to import the pictures via a wireless networked MacBook Pro me865b/a running the latest version of osx.
There's your problem. Simply, as you are discovering, iPhoto cannot have the Library on a network and the Library must be on a drive formatted Mac OS Extended (Journaled).
So, on your local HD or on an external HD attached directly to your Mac by USB, Firewrire, Thunderbolt, and
formatted Mac OS Extended (Journaled).

Hi, I have a specific website that keeps blocking me from going to website I want to view. It is called vnebo.pro or mobi. I also have a pc computer with Kaspersky and it blocks it. How do I remove it or block it from my computer.

Hi,
I have a specific website that keeps blocking me from going to website I want to view. It is called vnebo.pro or mobi. I also have a pc computer with Kaspersky and it blocks it. How do I remove it or block it from my computer? It only appears at my home, when I use my mac at other places I don't have a problem.
Thanks for any help!

Thank you for the reply. I wanted to wait awhile in order to ensure that this corrected the issue. For a brief while, it did! However, it did not take long before the screen began once again hijacking my home button presses. This occurs even with Firefox removed from default applications ( triple-checked ).
This never happened before version 35.

Project Help: Working with slides and video

I'm trying to create a flash video that will incorporate powerpoint-like slides along with video footage.
So for instance I will have slide 1 (graphic) - slide 2 (video clip) - slide 3 (text).
I have used CS4 before for one of my classes but that was a little while ago, and I feel like I'm starting over again.
When I import the first graphic (.png), is there an option to have it resize to fit the stage?

I have everything the way I want it except one thing. I have a picture along with text on a slide. I'd like to fly in the picture. It's been a while since I've created motion tweens, can anyone refresh my memory as to how I can have the picture fly in while the text stays put?
Also, does anyone know if it's possible to do dancing text like the "Saved By the Bell" logo (at the 1:02 mark in the video)?
http://www.youtube.com/watch?v=kHKvruzbWl4

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

I have a uk ipad2 with 3G and am going to the USA I want to get a micro sim from AT

I have a UK ipad2 with 3G and am going to the USA. I want to get a micro sim from AT&T so that I can use 3G in the USA. My question is that I know that I will need to sign up for an AT&T account on my Ipad.
Do AT&T accept foreign credit cards so that I can do this? I only have a european Visa/Amex credit card.
If they don't, is there any way that I can purchase a dongle in the USA and use a USB adaptor on my ipad2?
I appreciate any feedback - i have spoken to loads of people from Apple and AT&t but noone seems to know the answer.
thanks

You need a US credit card with a US address.

I have the photographer plan With Photoshop and Lightroom. Now suddenly The creative cloud app says that Lightroom isn´t installed. It is and how do i fix this. I don´t want to loose any pictures. Tried logging in and out. Also restarted my Imac with no l

I have the photographer plan With Photoshop and Lightroom. Now suddenly The creative cloud app says that Lightroom isn´t installed. It is and how do i fix this. I don´t want to loose any pictures. Tried logging in and out. Also restarted my Imac with no luck.

This has nothing to do with your pictures. As long as LR works, nothing happens. The CC app merely has lost an entry in the installer database. Would a reinstall fix it? Sure. Is it necessary? Not really (until the next version or update). So unless you have too much time to spend or something isn't working, I'm sure you can find more interesting things to do with your tiem. Otherwise use the cleaner tool and get to it:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Good books to have to help along with Certification and Basis Admin

Similar Messages

Maybe you are looking for