Good luck and good work Mr. Cook. We trust in you now.

Go to 7.2. There are feature improvements that are not listed that have helped so much
That these improvement have not been listed is so ridiculous. For other Apple updates, via softwre update, there is generally a list of what the update fixes.
As far as the "Not Enough Memory" error. Trust it's being worked on. But for now here is a great workaround, straight from the source.
What source is this?
I go to the Logic support page and see the same 10 or so support articles that have been there for the last year. Searching for "not enough memory" yields NO results. Entering "score" in the search field turns up a total of EIGHT technical articles since October 2004. In all of 2005, there were 3 tech support articles posted regarding the score editor. The last being in August. This is not isolated to the score editor. Searching under "automation" also only turns up 8, and "bugs" turns up....yep, 0
I know that programming Logic is a bear, and the the programmers are busting their butts. However, Logic tech support webpage simply isn't being managed and updated. Even one person putting 2-3 hours per week could be maintaining a more up-to-date interface than this. This is what colors everyone's experience.
The number one "feature request" I've been repeatedly submitting to Apple feedback is that I would like access a searchable and maintained tech support database that includes resources such as technical documentation, FAQs, bug reports and work arounds, lists of ALL issues addressed in an update, and user feature requests.
TC Electronic does it:
http://tcsupport.custhelp.com/cgi-bin/tcsupport.cfg/php/enduser/std_alp.php
If not this, simply post the information in the discussion board. Obviously, there is already someone perusing the boards.
I hope others will also submit this to feedback as well

Similar Messages

I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks

I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks
Loredano

These are the options you have.
Budget $1299.
http://www.apple.com/macbookair/
http://www.apple.com/macbookpro/
Best.

A1145 imac g5 isight, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes. You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again AHT Passed

A1145 imac g5 isight 2.1GHz
, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes.
You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again
Apple HardWare Test Passed
10.5.11
Orginal DVD's 9.2

Could be a heat problem.
Also, try these:
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767
and on resetting the PMU on a Power Mac G5, G4 and G3 :
http://support.apple.com/kb/HT1939?viewlocale=en_US
http://support.apple.com/kb/HT1436

FaceTime and iMessages worked fine on my ipad mini but now they don't please help

Okay so I was on face time when suddenly for the first time my ipad mini froze so I held down the home and off button like anyone else would do. Then when it turned back on I went back onto face time and it asked me to enter my username and password which I found a bit weird so I did. It then said that the username or password I entered was incorrect so I did it again it said the same thing. So I went on the App Store downloaded an app and it asked me to enter my password I did and it worked fine. Went back to enter my username and password for FaceTime and it said it again so I changed my password tried it again it still said it was incorrect. Then I tried it on my iPod and it works fine my question is why is my FaceTime and iMessages suddenly not working but my App Store and everything else works fine I use Face time all the time and I really need it can anyone help me because I don't know what to do

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

I was using firfox 3.6.20 and it worked prefectly with premiumplay codec c, but now with firfox 6, it won't install

the new firfox 6 seems incompatible with codec c premium play

I am sorry to hear that the program dosen't work in ff 5. If you tell us what the program is we might be able to help. Any way here is the link to 3.6.16, just select your locale. [http://www.mozilla.com/en-US/firefox/all-older.html]

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

We are using SAP SRM to punch out external catalogs. Firefox version 3.5 and below works fine and the items from the catalogs are brought back to SRM .But when we use version 3.6.12 the items are not getting transferred back to SRM from the Catalogs.

SRM is a procurement system from SAP which we use to purchase goods and service. We have external catalogs like officemax, cdw etc which we punchout the items and bring it to SRM for ordering.
When we use firefox version 3.5 and below the items which we add from the Catalogs are correctly brought back to SRM for us to order. But when we use versions 3.6.12 the items are not brought back to SRM.
Internet Explorer 7 and 8 works fine. Is there anyway you can help us.
Thanks
Jayant

Hi,
Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version for SAP solutions. Many of your problem will get resolved with it.
Question 1:
So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
Generate EarlyWatch report for more detailed view
Question 2:
My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
The libttsh11.so library cannot be found in the related directory.
Cause
The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
Such a configuration will cause, installation, relinking and other unexpected problems.
Solution
Disable the CIO option on the filesystem.
References
NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
Hope this helps.
Regards,
Deepak Kori

Bug Report for files first opened in Bridge and then worked in Photoshop

I encountered a problem with files first opened in Bridge and then worked in Photoshop as follows:
1. I opened a raw file in Bridge and then after corrections sent to Photoshop with no problem, however, after correcting and saving the file I then went back to the option of closing file and going to bridge. It closes file and stays in Photoshop. In order to get back to bridge I must either click on the bridge logo at bottom of screen or request to go to bridge.
2. I tested the same thing in CS-5 and it works like it is suppose to you click on close and go to bridge and it immediately takes you back to bridge.
3. Unless this is a new feature or suppose to work this way then it is a bug.
NancyZ

Hi Curt
Yes, I am talking about opening a file in bridge doing necessary corrections etc and then sending on to Photoshop. Once I do necessary corretions and save in Photoshop my next step would be to select close and open in bridge which is a choice. In previous Photoshops that I have used (CS4 and CS5) when you did this it would close the file and then immediately take you back to bridge. Now under CS6 if you select close and go to bridge it closes the file but remains in Photoshop. If bridge is not a choice when you select close and open in bridge why even have that as a choice? Why not just select close and then click on bridge logo or Control Alt O or select go to bridge?
Nancy

My device lucked and not identified with the itunes id

Dear Sir or madam,
my device lucked and not identified with the itunes id

What do you mean 'device locked' ?
If it's on the activation screen then you need to type in the id and password of the account that it's locked to.
If you bought the phone used and it's still linked to the previous owner's account then you will have to contact the previous owner, only he/she can remove the phone from their account : Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
If it's your account and it's not recognising it then you could try contacting Apple (either an Apple store or iTunes Support online) and see if they can remove the phone from the account - they are likely to want proof of purchase e.g. original receipt with the serial number on it
(For info we are fellow users here on these forums, you're not talking to iTunes Support nor Apple. I've asked for your post to be moved to the Using iPhone forum, where you've posted is for questions about the iTunes U app.)

X-fi Xtream audio and sonar 6 producer...recording "what you here" garbled

I just purchased this Xtream Audio card and installed it but when I start Cakewalk Sonar 6 Producer the wave profiler states that there is no stereo capable sound device available. The card is working as sound is produced through the speakers and the suite opens with no problems.
When I record via "what you hear" the sound is garbled.
I have a pentium D Dual Core 2.66hz with 4 GB RAM(3.25GB available) and the onboard sound device has been un-installed.
I have tried reloading the drivers and software to no avail.
I removed the card and enabled the cheap onboard sound and it works with no problems. "what you hear" records without the gabled sound.
All effects have been disabled. Sonar and Card are set to record at 44111.
Any suggestions?

scottyo wrote:
Hi jutapa,
I was using WDM/KS. the asio will not work. when I change to asio and restart the program there is no sound card listed or available. I was using the "what you hear" because I am recording internal MIDI files with VSTi plugins to convert to a wave file and I have no idea of any other way to do this. I works fine with the intergraded sound drivers but not with this new card. This is why I think that the card or drivers are damaged. I downloaded new drivers from the website but they didn't work either.
Asio4all should work well with your card - http://www.asio4all.com
- you'll get lower latency (down to 2-3 ms instead of 10ms as with WDM/KS)
Remember also enable those input/output drivers (Options->Audio->drivers -tab)
Rendering MIDI + VSTi/DXi to a wav file is done by "bounce to track(s)". It's well covered in Sonar documentation and online help:
To Convert Your Soft Synth Tracks to New Audio Tracks
Mute all tracks that you don't want to convert.
Use the Edit-Bounce to Track(s) command.
The Bounce to Track(s) dialog box appears.
In the Destination field, choose a new or pre-existing track to put the new audio data on.
If you've saved presets from previous bounce operations, you can choose a preset from the Preset field.
In the Source Category field, choose Tracks.
In the Channel Format field, choose mono if you want a mono track, stereo if you want a stereo track, and split mono if you want to create separate mono tracks.
In the Source/Buses field, choose the output bus(es) that the soft synth tracks are using (usually the main outputs).
In the Mix Enables field, make sure all choices are selected.
Click OK.
SONAR creates new audio tracks from the outputs you selected. When you're through converting, don't forget to mute your MIDI tracks so you won't hear them and the new audio track(s) at the same time.
Note: you control the bit depth of all rendering operations (bouncing, freezing, applying effects) on the Audio Data tab of the Global Options dialog (Options-Global command) in the Render Bit Depth field. The default value of 32 is the best for most situations. See Bit Depths for Rendering Audio for more information.
Converting MIDI to AudioWhen you finally get your MIDI project into the shape you want, you can convert the MIDI tracks to audio for export as Wave, MP3, or other file formats. If you are using external MIDI modules, just record the outputs of your modules into your sound card. If you are using soft synths, use the File-Export-Audio command, or the Edit-Bounce to Track(s) command. If you are using the built-in synthesizer in your sound card to produce MIDI sounds, you can use your sound card's "What You Hear" or wave capture function to convert the MIDI tracks, if your sound card can function this way. See the following procedure:
To Convert MIDI to AudioPick a destination audio track (or create a new one) and set the Input field to Stereo (name of your sound card).
Note: If you have more than one sound card installed, select the one that has the built-in synth that your MIDI tracks use.
Arm the destination track. Make sure its Input Echo button is off, so you won't hear an echo when you're recording.
Mute any tracks that you don't want to record to the destination track.
Open your sound card's mixer device. This is normally done by double-clicking the speaker icon on your Windows taskbar, or by choosing Start-Programs-Accessories-Entertainment-Volume Control-Options-Properties.
Note: Some sound cards have their own proprietary mixer. If yours has one, please use it instead.
If you're using the Windows mixer, use its Options-Properties command to open the Properties dialog box, click Recording (in the Adjust Volume For field), and make sure all boxes in the Show the Following Volume Controls field are checked.
Click OK, and locate the slider marked MIDI, Synth, Mixed Input, or What You Hear. Check the Select box at the bottom, then close the window.
In SONAR, rewind to the beginning of your project, click the Record button, and click the Stop button when you're done recording.
SONAR records all the MIDI tracks that are assigned to your sound card synth as a stereo audio track.
After you finish recording, mute the MIDI tracks that you just recorded so you don't hear them and the new audio track at the same time.
There are good tutorials you can go through to learn using Sonar features.
jutapa
Message Edited by jutapa on 05-20-2008 10:23 PM

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

I charged my ipad with a defective charger, it heated up and stopped working. i charged for a good 4 hours without knowing the charger was defected (distortion of internal wires and a broken protective external layer)

I charged my ipad with a defective charger, it heated up and stopped working. i charged for a good 4 hours without knowing the charger was defected (distortion of internal wires and a broken protective external layer)

You're not asking any question so I'll just ramble.
You may have permanently damaged your iPad. The iPad controls the current coming from the charger but the charger electronics must be capable of responding to the iPad. Charge with a known good charger and then test your iPad. If it's OK, you lucked out. Otherwise... If the charger was not an Apple charger, you're completely out of luck. If it was an Apple charger, call Apple and discuss the issue with them.

When i upgrade my Mac Pro to yosemite safari doesn't good work and doesn't save bookmark plz help me to fix it

when i upgrade my Mac Pro to yosemite safari doesn't good work and doesn't save bookmark plz help me to fix it

hi
when i save a page as boomark shown at the bookmark list when i close safari and restart safari evry bookmark that i saved dosn't show at the bookmark list
excuse me for whriting i speak a little english
1 save bookmark and show at the bookmarklist
2 i close safari
3 and reopen it
4any bookmark ,i saved them dosn't show at the bookmark list

If I install Windows 7 on iMac (what we have done many times and it works very good) does windows support the fusion drive?

if I install Windows 7 on iMac (what we have done many times and it works very good) does windows support the fusion drive?

Welcome to the Apple Support Communities
Fusion Drive is created by software on OS X. On a computer with Fusion Drive, Windows is installed on the HDD, but when you install the Boot Camp drivers, you will be able to read Macintosh HD, so it looks like it supports Fusion Drive but only for read

I have a problem in this that i want to paas a form in a case that when user pres n then it must go to a form but error arises and not working good and threading is not responding

made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
    class Program
        #region Cosmos Builder logic
        // Most users wont touch this. This will call the Cosmos Build tool
        [STAThread]
        static void Main(string[] args)
            BuildUI.Run();
        #endregion
        // Main entry point of the kernel
        public static void Init()
            var xBoot = new Cosmos.Sys.Boot();
            xBoot.Execute();
            Console.ForegroundColor = ConsoleColor.DarkBlue;
            a:
            Console.WriteLine("------------------------------");
            Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
            Console.WriteLine("------------------------------");
            Console.WriteLine();
            Console.WriteLine();
            Console.WriteLine();
            Console.WriteLine("\t _____
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |");
            Console.WriteLine("\t|   |       |            |
|          |      |___________");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|   |       |            |
|          |                  |");
            Console.WriteLine("\t|_____|       |____________|         |____________|      ____________");
            string input;
            Console.WriteLine();
            Console.Write("\nAbout OS     : a");
            Console.Write("\nTo Shutdown : s");
            Console.Write("\nTo Reboot    : r");
            Console.Write("\nStart Windows Normaly : n");
            Console.WriteLine();
            input = Console.ReadLine();
            if (input == "s" || input == "S"){
                Cosmos.Sys.Deboot.ShutDown();
            else
            if (input == "r" || input == "R"){
                Cosmos.Sys.Deboot.Reboot();
            else
            if (input == "a" || input == "A"){
                Console.ForegroundColor = ConsoleColor.DarkBlue;
                Console.Clear();
                Console.WriteLine("\n\n\n-------------------------------------");
                Console.WriteLine("version: DISPLAYS OS VERSION");
                Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
                Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
                Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
                Console.WriteLine("-----------------------------------");
                Console.Write("You Want to know : ");
                input = Console.ReadLine();
                if (input == "version"){
                    Console.WriteLine("--------------------");
                    Console.WriteLine("OS VERSION 0.1");
                    Console.WriteLine("--------------------");
                else
                if (input == "about"){
                    Console.WriteLine("--------------------------------------------");
                    Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
                    Console.WriteLine("--------------------------------------------");
                Console.Write("Want to go back to the main window");
                Console.Write("\nYes : ");
                string ans = Console.ReadLine();
                if (ans == "y" || ans == "Y")
                    goto a;
                    Thread.Sleep(10000);
                else
                if (input == "n" || input == "N")
                    Thread.Sleep(5000);
                    Console.Clear();
                    for (int i = 0; i <= 0; i++){
                        Console.Write("\n\n\n\n\t\t\t\t\t ____        ____   ___
                        Console.Write("\n\t\t|\t\t | |      |    |
|   | | | | |");
                        Console.Write("\n\t\t|\t|    | |---- |    |
|   | | | | |---");
                        Console.Write("\n\t\t|____|____| |____ |___ |____ |___| |    | |___");
                        Thread.Sleep(500);
                    Thread.Sleep(5000);
                    Console.Clear();
                    BootUserInterface();
                    Console.ReadLine();
//                    Form1 fo = new Form1();
                else{
                    for (int i = 0; i <= 5; i++){
                        Console.Beep();
                        Thread.Sleep(1000);
                        goto a;
            while (true);
        private static void BootUserInterface() {
            Thread t = new Thread(UserInterfaceThread);
            t.IsBackground = true;
            t.SetApartmentState(ApartmentState.STA);
            t.Start();
        private static void UserInterfaceThread(object arg) {
            Form1 frm = new Form1(); // use your own
            Application.Run(frm);

Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Good luck and good work Mr. Cook. We trust in you now.

Similar Messages

Maybe you are looking for