Good Mac for video editing?

Hi,
I'm interested to buy a new Mac for video editing and I don't know which mac to choose. I need a laptop computer that can run Adobe After Effects and Final Cut Studio without too much bugs. I asked some people which Mac I need to buy, and they told me a Quad-Core iMac 27 inch or a Mac Pro.
Since my bugdet is quite limited, I will prefer buying an iMac than a Mac Pro because the iMac already has a screen.
Thank you,
Franklin Schrans
<Email Edited by Host>

appsandhacks(youtube) wrote:
Hi,
Thanks for the great advice, but since I live in Belgium I can't order a Mac from the US Apple Store.
Franklin Schrans
[email protected]
Franklin,
You are correct you cannot purchase from the US Apple Store however the Belgian store does have refurbished section located at: http://store.apple.com/be-fr/browse/home/specialdeals/clearance?mco=OTY2ODY2NQ
I see they don't have anything to sell right now however I would continue checking this site very frequently, products come and go very quickly. If you decide to purchase new in order to get the most powerful iMac purchase a machine based on the i7 processor. You can also call the online store their number is in the upper left corner of the store's home page, they can also provide advice or if you visit your local Apple Store they can assist as well.
Roger

Similar Messages

Is photoshop good enough for video editing ?.

Hi.
Is photoshop good enough for video editing ?.
Thanks.

As DSLRs and cameraphones have added the ability to produce short videos, Photoshop has added that feature in for convenience.
This should clear up the question for you.
http://www.adorama.com/alc/0013918/article/Editing-Video-in-Photoshop-Ep-114-DSLR-Video-Sk ills-with-Rich-Harrington-Ador…
Of course it's not going to put Adobe Premiere or Final Cut Pro out of business.
Gene

Need advice on new mac for video editing.

Hello! I'm throwing $4,000 down on a new iMac to use for video editing and various other design purposes. I'm maxing it out with a 3.75ghz quad core intel i7, 32 gigs of ram, 4 gigs of video ram and a 1t sold state hard drive. With being a creative cloud subscriber and updates being rolled out constantly, as a video editor do you think i'll get at least 5-7 years out of this mac. I also do 3d animates with after effects and cinema 4d. Thanks! Any advice and feedback is greatly appreciated.

I made last updates to PC configuration (updates - bold) and soon going to buy. So... maybe final check:
CPU: Intel Core i7-3930K 3.2GHz
Cooler: Corsair Hydro H70
MB: Asus P9X79 PRO
RAM: Corsair Vengeance Black 16GB (4x4GB) DDR3-1600 CL9 1.35V XMP1.3
Video: Asus GTX670-DC2-2GD5
HDD: Samsung 830 Series 128GB SATA3 520/320MBs (system disk)
2 x Seagate Barracuda 2TB SATA3 7200RPM 64MB (scratch/cache/render disk) *
PSU: CORSAIR AX850 80+ GOLD
DVD: LiteOn BD-RE iHBS212-32
Case: ANTEC P280
OS: Win7 Pro OEM
RAID: G-SPEED eS (RAID 5, projects/media)
* Due to a limited budget, at the beginning I'll use HDD's in non-RAID configuration or will build RAID0 based on MB RAID controller

Good site for Video Editing tools (open source)

I'm a recent convert to Mac, and I'm having a hard time finding comparable tools to what is available via open source on the Windows side. Specifially in the H.264 arena. There are a multitude of open source encoding tools for Windows. I'm sure there have to be some for Mac. Are there any good sites that list these? I'm tried versiontracker and The Mac Orchard, but I'm hoping for something more specific like VideoHelp.com
Any suggestions? I'm looking for encoding software that can do inverse telecine, import DivX/Xvid/DV, Trim video (to remove letterboxing), and encode to H.264.
Thanks!

Can't help with the video stuff, but since you're a newcomer to the Mac, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
And a link to open source software: http://sourceforge.net/ Search for *multimedia for Mac*.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides, and
A guide for switching to a Mac.

Nvidia GTX 280-A good choice for video editing?

SO for the longest time now I have been having weird playback trouble with editing. I didn't think too much about it then because I didn't care that much about quality. This was when I was rockin CS3 and my card was an 8600 GTS. Recently I got a new computer with a sweet setup. It is an intel core 2 Quad @9550 with a GTX 280, 780i SLI board, and 5 gigs of DDR 2 ram. Yet, despite this, when ever I play footage into premiere,the images becomes slightly fuzzy in playback. This would not irritate as much as when I export it, The quality is just as bad. I uploaded HD footage off of a P2 card, exported it, and when you play it; it looks interlaced! The footage also looks like is did in premiere, very fuzzy. Now that I'm starting to get into the realm of HD this crap needs to stop. Does anyone have any ideas?

The fuzziness in your preview monitor is probably because you have the preview quality set to "automatic" or "draft". If you set it to "Highest Quality" it should look very good, albeit possibly pretty harsh on your processors.
At the bottom of your preview monitor look for a tiny icon that looks like 3 circles, click that and that's where you change the preview quality setting. This does NOT in any way affect the export, by the way.
The bad quality in your exports is a different story. We'd need exact specs as to what format, codecs, bitrates etc. you are exporting to.

I am planning to buy mac mini 2.5Gzh. I will be using it mainly for video editing and I am planning to upgrade up to 8GB. Is it a good buy or should I try some other alternative.

I am planning to buy my next desktop. I will be using this mainly for video editing. I am not a professional video editor, I normally do home made videos for youtube, like tutorial, DIY project etc. I use Nikon D3100 camera and some basic green screen techniques as part of recording. So my basic video editing would be just syncing audio, editing videos to cut un-necessary frames etc and some basic effects. I am also planning to buy final cut pro.
So my question is should I buy the mac mini or Imac?

Great advice from RRFS!
For video editing, do go for 16 GB of RAM ffrom OWC & consider the twice as fast i7 2.6 model, see Geekbench scores here..
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

The new i mac is it good for video editing

apple just release 2 new models of imac they still looking very good but they are considerable cheaper so i wonder if any of these models good for video editing.

some say the pice cut is not worth it
http://arstechnica.com/apple/2014/07/1099-imac-review-lose-50-of-your-performanc e-to-save-18-of-the-money/

What format is best for an external hard drive for video editing on a mac?

What's the best format for an external hard drive for video editing to be use with a mac only? I need to format my new hard drive and want to be sure I choose the right format.

I concur with Kappy. His suggestion is correct.
Allan

I have a lot of HD video on my hard drive that I eventually want to edit in iMovie, but just don't have the time now. It is clogging up the computer, though. How do I take the Hd clips off Mac for later editing?

I have a lot of HD video on my hard drive that I eventually want to edit in iMovie, but just don't have the time now. It is clogging up the computer, though. How do I take the Hd clips off Mac for later editing?

See "Storage drive" here
Most commonly used backup methods
Th problem with HD video is it needs a fast external interface, so you should pick a external drive that uses the fastest interface your computer has to offer.
Performance rank fastest to slowest is
Thunderbolt, USB3, (newer Mac's)
Firewire 800, USB 2, Firewire 400, USB 1 (older Mac's)
Newer Windows PC's have USB3, older one's USB 2,1.
You need to format the drive if it comes FAT which a lot do, as FAT has a 4GB file size limit, so this won't work with large HD video files.
So if your going to use the drive only with a Mac, then head to Utlities > Disk Utility and format it Options: GUID Format: OS X Extended Journaled. (select the drive makers name and click Partition tab)
If your going to use the external drive with a PC, take it to the oldest PC you have and right click and format exFAT.
If you have a Windows XP machine and there is no exFAT, it can be downloaded for free from Microsoft.
Drives, partitions, formatting w/Mac's + PC's

Mac Pro for Video Editing?

So I have an awesome Mac Pro computer at work all well equiped with all the bells and wistles for video editing and now I'm looking to upgrade my machine at home which is currently just a macbook pro with a second monitor.
My one concern is that the Mac Pro has not been updated in sometime. Obviously the mac bro route would be best for me being in video production so I can easily upgrade component with the never ending technology that keeps changing. Now the concern about buying a Mac Pro right now is the possibilites of it being upgraded. Now I understand things are obviously always being upgraded and things are never up to date for very long. However I'm concerned that if in like 3-4 months they came out with something and changed the decision that I maybe screwed for upgrade components along the way.
Just thought I'd get some insight from some of you and what your suggestions maybe?
Thanks in advance.

budget, time-line, stomach for 1.0 revamp (every new model, 2012 could be 3x), lack of Rosetta of course.
production never = bleeding edge, go for a mature well tested proven design - expect to see firmware change, compatibility issues, and 3-4 months for a unified build and drivers rolled out, no?
a nice $2200 "hold me over the hump" for the next 6-12 months for now, W3690/X3690 DIY (the w3680 3.33 6-core is mere $620)
no easy answer that I see with all the products Intel has on their plates.

Which of these macs would you choose for video editing?

The main difference is the MBP has an Serial ATA drive, and the Air has a Flash drive. Also the MPB has 2.9Ghz, and the Air has only 2.0Ghz. Which one would you pick for editing with Final Cut Pro X? (Also curious which one you would pick even if video editing wasn't a concern for you, thanks!)
MacBook Pro 13.3” - Dual-Core i7 2.9Ghz ($1269 refurb, or $1399 new at BestBuy)
Eligible for OS X Mountain Lion Up-to-Date Program
Originally released June 2012
13.3-inch (diagonal) LED-backlit glossy widescreen display, 1280-by-800 resolution
8GB (2 x 4GB) of 1600MHz DDR3 SDRAM
750GB Serial ATA @ 5400 rpm
8x double-layer SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Intel HD Graphics 4000
Or
MacBook Air 13.3” - Dual-Core i7 2Ghz ($1449 refurb)
Eligible for OS X Mountain Lion Up-to-Date Program
Originally released June 2012
13.3-inch (diagonal) LED-backlit glossy widescreen display, 1440-by-900 resolution
8GB memory
512GB flash storage
720p FaceTime HD camera
Intel HD Graphics 4000

Zenman1969 wrote:
Thanks for the answer. Didn't realize the 13" MBPs differed from the 15" MBPs. I thought the screen was the only major difference.
Apple fools a lot of people with that. The 13" is really a MacBook and not a "Pro" machine.
The best machine for video editing depends upon what your going to do, full on production or casual home stuff.
A 15" MacBook Pro and a iMac for the casual lightweight stuff and iMove can do the job.
The new MacPro coming out for the heavy duty stuff.
The industry seems to be moving away from Final Cut Pro X as it's been consumerized or something, lacking needed features and moving towards Avid on powerful Mac's or Windows 7 towers.
http://arstechnica.com/apple/2011/07/does-apple-still-care-about-creative-pros/
http://www.avid.com/US/
So perhaps a mix of Avid and Final Cut Pro X if your serious about furthering your career.

I want to upgrade my Power Mac G5 Quad (Mac OS X 10.5.8) for video editing purposes. What upgrades should I make?

Hello!
I want to upgrade my Power Mac G5 Quad (Mac OS X 10.5.8) for video editing purposes.
Rendering,editing and exporting takes some time on my computer. I just want things to go faster.
What upgrades should I make?
Thanks in advance!!!

Here are other video cards that you can search for that will also work in your G5.
NVIDIA GeForce 7800 GT with 256 MB of GDDR3 SDRAM, and NVIDIA Quadro FX 4500 with 512 MB of GDDR3 SDRAM
http://www.amazon.com/nVIDIA-Quadro-FX4500-PCI-Express-631-0110/dp/B004XCYG10/re f=sr_1_3?s=electronics&ie=UTF8&qid=1365657320&sr=1-3&keywords=NVIDIA+Quadro+FX+4 500
or
http://www.amazon.com/Power-Nvidia-256mb-Geforce-Express/dp/B00BL30JQU/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1365657552&sr=1-3&keywords=NVIDIA+GeForce+7800+GT

Hi sir im using fcp 7 for video editing in i mac, how can i edit mts files in fcp 7 without log n transfer, is their solution for fcp 7?

Hi sir im using fcp 7 for video editing in i mac, how can i edit mts files in fcp 7 without log n transfer, is their solution for fcp 7?

>No, you are not right.
Going to question the biggest contributor to this forum? (Yes, my ego is talking). OK then...
>Install the QT-Plugin, restart your Mac and you will be able to import and use .mts files in FCP 7.
Sure...yes, that makes it POSSIBLE to read the files natively in FCP...if they come from a Panasonic camera. BUT...just try working with those files. Right away the system won't be nearly as responsive as it would if they were ProRes. First...there are no sequence settings for that format...so you'll have to use ProRes and have a green render bar. BUT, that's no big deal. The big deal is trying to work with the AVCHD format, which is VERY processor intensive...inside an application that doesn't like to work with much outside of the FCP editing codecs.
Is it possible? Sure? Will it work well...will you be as zippy and error free as if you converted to ProRes? Not by a long shot. OH, but don't just take my word for it. Go ahead...try it and see. No skin off my nose...no waste of my time. See how well this works.
I'm just here to relate real world working solutions to issues. And yes, I did try that plugin, and boy, was editing a pain.

Storage options for video editing

For video editing is it better to use an external drive as the scratch disc or use an internal (non-bootable) drive. I keep getting conflicting information. I would like to get an additional 500gb for my system (Mac Pro G5)but don't know what direction to go. Any advice/opinions would be greatly appreciated.

Well it all depends. Certainly, there's many good reasons to install a second internal drive. But I think it's better to use this as a "clone" of your startup drive. When I have a stable OS and application combo, I clone my startup drive to the second internal drive using carbon copy cloner (available at versiontracker.com). After cloning, I always try starting up from the clone to make sure everything's working. Then I can do a software update, install additional apps, and if my system goes south either from updates or some sort of corruption, I can quickly restart from the second internal drive and get back to work.
I've installed a sata card and bought a 5 bay sata enclosure from macgurus. Trays are about $ 25.00 and drives keep getting cheaper. I can quickly swap out drives and you can also stripe the drives if you need faster thru put.
I used to have as many as 11 firewire drives chained to my g5 and it worked great for years. But then things went seriously south and it took many months of troubleshooting to figure out the problem. It seemed like different brands of firewire drives did not play nicely together. I've been working with the sata enclosure for 2 1/2 years without any problems.

Best affordable choice for video editing & other stuff?

I've been a PC user forever. I'm looking to enter the world of Mac. I do video editing with Adobe CC on a windows 7 Destop PC with an i7 Quadcore and have a nice LED monitor. I'd like a Mac capable of doing graphics well and has the processing power of an i7. I was thinking of a Macbook rather than than a iMac because I don't need the built in screen - I already have a very nice LED monitor. I also like the idea of portability. So I figure i could hook up the Macbook to my LED monitor when at my desk, and then be able to port it around when I wanted to go mobile. Is this reasonable? Is a macbook laptop capable of this kind of processing? I know my HP Powerbook with Win7 struggles doing this kind of stuff even though it has a dedicated nVidea Graphics and is an i7 2.3GHz with 16G memory, so I never use my HP laptop for video editing. I thought about the Mac Pro, but that is WAY out of my budget. Is there a Macbook that would be good for video editing and not break the bank? Like I've said, I'v discounted the idea of getting an iMac because of space & (I already have a decent size LED monitor that I'd like to continue to use and share with my Windows PC.

the last 2 and the bottom of this link would be more than adequate: http://store.apple.com/us/buy-mac/macbook-pro

Good Mac for video editing?

Similar Messages

Maybe you are looking for