Good Movement at the confirmation of an operation
Dear All,
I tried to make good movement when I maked an confirmation for an operation.
I configured whit TC: OPK4 automatic good movement and whit TC: OP67 I choosed option automatic good movement for control key.
However, when I maked an confirmation (TC: CO1F), the system didn't propose the material from BOM, for issues, or the finished good to get in stock.
And an additional question: if I have many operations on the routing and each of them have the same control key (PP01, for example) the system cannot accept any automatic good movement.
What can I do in this case?
Thank you very much for the answers.
Regards,
Marian
Hi,
You are trying progress confirmation right...
As per my knowledge for production order confirmation you could findth egoods movement...
in CO15 or CO11N...
For th e second question if u have N number of operations then you could confirm operation wise in CO11n and for first operation goods issue and for the final operation goods recipet will happen
Regards,
sravanthi
Edited by: Sravanthi683 on May 21, 2009 10:34 AM
Similar Messages
-
Goods movement in QC confirmation for inprocess operation
Dear Friends,
I am doing inprocess inspection for routing operations. After results recording, I get the window where I am entering yield.
If I go to confirmation tab, I can enter the activities and qualntity. But ther I am not getting goods movement tab.
I want assign batch no. to material in the goods movement tab.
How can I get it?
Please help me.
Waiting for reply!
Thanks!
KiranNo Inputs?????
-
Not Allowing Goods Movements for the confirmed quantity in the delivery
Hi Gurus,
I would like know how to make the system not allowing movement for a batch at MB11 when that batch of one material is confirmed in a delivery?
ex: In the delivery: material number: 9009, Batch 0000A and quantity is 10. And there is no more quantitty in the warehouse for Batch 000A and material number: 9009.
Dont allow any movement type for 9009 and 000A batch.
Thanks a lotHi,
As far as my understanding there is no such provision,
Check is there any option to block assigned batch temporarily, so system can not consider it for next business transaction
Kapil -
Automatic goods movement at the time of confirmation in IW42
Hey gurus,
In a maintenance order i ve reserved some materials to be issued from the stores. Now i am not issuing the reserved materials from the stores and going to iw42 for confirming the operations of the order. If i select the item overview of the operation line against which we have booked the material, in the goods movement section i can see my reserved material which hasn't been issued from the stores. Now when i'm saving the confirmation, goods movement of the unissued material is automatically taking place and the cost of the material is getting booked in the order. How do i stop this automatic posting of material?
Regards,
AbhishekHi friend
in spro
Plant Maintenance and Customer Service-Maintenance and Service ProcessingMaintenance and Service OrdersCompletion ConfirmationsDefine Control Parameters for Completion Confirmations
you can define the setting of goods movements
jitender -
Problems with goods movements cancelling network confirmations
Hello experts,
I'm having some problems with goods movement when cancelling network confirmations.
I assign a component for a operation in the project builder (CJ20N). Then when I execute a confirmation for that operation in CN25 everything works correctly, I can assign the time for the confirmation and SAP automatically carries the component assigned to the operation. Once I have done the confirmation the goods movements and the hours have a correct account assignment.
The problem is that if I cancel this confirmation, the hours are correctly cancelled but the component is still there. If I try to cancel the goods movement with MIGO it is no possible because the system says that must be cancelled with the corresponding transaction (CN29) but, as I have said, the system does not cancel it.
On the other hand, If the goods movement goes to COGI transaction and then I post-process the error, If later I cancel the confirmation, everything works correctly.
Does anybody know why this could happen?
Thanks and regards
LauraHi
I think this question was raised earlier also. The best way is to allot a fixed time slot for your users so as to avoid clash. I suppose i explained that the master data of any material is stored at one place only and if you schedule a background job for this then all your good movement transaction will be in que and performed in orderly manner.
If automatic posting is not possible then use the time slot method.
Krishna -
Error in Goods Movement during order confirmation
Hi,
I am trying to confirm a production order through CO11n,but i am getting an error in Goods Movement .
The following message is displayed in the log - "* Posting only possible in /11 anperiods 2008d 2008/10 in company code A100*". Can any one guide me what should i do to confirm the order without any error in Goods Movement,
Thanks in advance.Hi,
It is advisable to correct the Goods Movement Errors in COGI in the same period (before closing the period by MM in MMPV). You cannot correct the same if the period is closed.
Only option is you need to open the closed period in consulatation with FI and MM team members
OR
Delete the Error movement records in COGI and post the Goods Issue for the production order in Tcode : MB1A with movt type 261 and go inside and mention the materials which you want to issue to the order.
Hope this will help you.
regards
radhak mk -
Goods Movement on Order Confirmation
Hi all,
Whenever i issue a material while doing Order confirmation (IW41: Using goods movement option) , the material is issued but its cost doesnt get populated on the maintenance order. I guess i am missing some configuration end but can anybody guide me or give me hint where is the root cause lies of this problem.
Why the material cost is not getting populated on the maintenance order.
(Note: I am using my own Order Type not the standard one)hi
I hope this is the problem in ur config
Plant Maintenance and Customer Service - Maintenance and Service Processing - Completion Confirmations - Define Control Parameters for Completion Confirmations
If u have tick at Materials, remove it
It will give only plan cost, not the actual cost
If u dont use this tick, you can do goods movement from iw41 and the cost will be calculated in the actual cost
- Pithan -
Restriction to delete goods movement data during confirmation thru CO11N
hello all
Please let me know how to prevent the user to delete the rows in goods movement screen during confirmation through transaction CO11N ,as users are able to confirm without goods issue by deleting that rows.
Should we contact basis person for the same
with regardsDear,
Please refer my reply in this thread,
https://forums.sdn.sap.com/click.jspa?searchID=16368869&messageID=6047820
https://forums.sdn.sap.com/click.jspa?searchID=16368869&messageID=6151829
Try using transaction variants. There is a utility called GUIXT in transaction. You can write code to add a pushbutton on the desired screen by using the GUIXT. The coding syntax is provided in the SAP application help. Use transaction SHD0 to create the variants.
http://wiki.ittoolbox.com/index.php/Implement_a_screen_exit_to_a_standard_SAP_transaction
Hope it will help come back if any problem.
Regards,
R.Brahmankar -
My cursor does not move to the confirmation box after selecting delete
When selecting 'Delete' for an email for instance, the cursor would then move to the confirmation box but with Firefox 4 this does happen now.
Out of curiosity, are you using 'NoScript' or anything of the like?
This occurrence happened to me on the Google page and I figured out that 'NoScript' was blocking Google therefore not allowing the cursor to activate in the search input field. I simply ''allowed'' Google.com and I had no problem thereafter. Perhaps you have a similar problem. -
OK i bought a movie got the confirmation email but iTunes says I need to buy it even the funds where taken
Not sure what your issue is or what your question is.
-
Restrict user to delete item in good movement at the time of confirmation
Hi ,
I have one requirement i.e. When user confirming the partial confirmation and if he selected the goods movement button i have to restrict the user not to change the material quantities in the goodsmovement screen.How i can do it .Is there any user-exits to do so, if any plz give me more info .
Regards,
AnandHi
Try any of the below enhancements
CONFPP01
With this customer enhancement you can determine your own default values
(ones that deviate from SAP logic) for a confirmation. The confirmation
can be changed in the customer enhancement.
The following are copied to the interface: the operation in the order
(AFVGD), the order header (CAUFVD) and the confirmation (AFRUD) as well
as the confirmation parameters (TCORU). The confirmation is copied back
from the customer enhancement to the SAP standard program.
CONFPP02
With this customer enhancement you can make your own checks of the
confirmation after the SAP checks have taken place. The confirmation
cannot be changed.
The following are copied to the interface: the operation in the order
(AFVGD), the complete order header (CAUFVD) and the confirmation
(AFRUD).
CONFPP03
With this customer enhancement you can make your own checks once an
operation has been selected for confirmation. The data cannot be
changed.
The following are copied to the interface: the operation in the order
(AFVGD) and the complete order header (CAUFVD).
CONFPP04
With this customer enhancement you can carry out your own checks on the
confirmation. The confirmation can for example be changed depending on
the user's entries.
The following are copied to the interface: the operation in the order
(AFVGD), the complete order header (CAUFVD) and the confirmation
(AFRUD). The confirmation is copied back from the customer enhancement
to the SAP standard program.
CONFPP05
With this customer enhancement you can update your own data once you
have saved the confirmation. You cannot change the confirmations.
In this customer enhancement it is strictly FORBIDDEN to send error
messages or other messages because otherwise there is the danger that
data will be inconsistent. SAP takes no responsibility for this !!!
The following are copied to the interface: a table with all the
confirmations (AFRUD) created in this transaction and a table with the
order headers (CAUFVD) that belong to it.
CONFPP06
With this enhancement you can determine which data from a manually
entered confirmation is transferred to the automatically created
confirmations, for example, when a confirmation is entered for a
milestone operation.
In addition to the order data (IS_CAUFVD) and operation data (IS_AFVGD),
the confirmation type (I_CONF_TYPE) is also transferred. The data from
the manually entered confirmation is imported via the structure
IS_AFRUD_MAIN and the data determined by the system for the
automatically created confirmation is imported via the structure
IS_ACT_DATA.
The data from the automatically created confirmation can then be
modified and exported via the structure ES_ACT_DATA.
CONFPP07
With this enhancement you can define your own detail areas (screens)
that can be issued for the single screen entry of time ticket
confirmations.
Two function modules are available to implement the flow control for the
customer-defined screens. While the function module EXIT_SAPLCORU_S_100
transmits the data from the confirmation, order, operation and work
center, the entered confirmation data can be exported using the function
module EXIT_SAPLCORU_S_101 and the structure ES_AFRUD. -
Goods Movement Qty While Confirming the Order
Hi Friends,
While confirming the order The end user Will go to the goods movement screen and enter the actual consumed Qty (When all BOM components Are marked with automatic Back flush) For the components with 261 movement type and will enter the storage location and batch no if required .
Now my requirement is the user should not have the access (it should be in gray) to the BOM Components qty to change
OR
He should not be able to change beyond the qty As per scrape % Given in Material Master or BOM.
The Reason for this is
Even When there is a shortage for BOM components in SL location, he is reducing/Adjusting the required quantities as per the existing Qty ( If there is no stock then making it to ZERO also) and confirming the order.
Pl suggest me is there any user Exit for this or can I do it thru Standard SPRO settings.
hariHi,
You can make screen variant SHD0 for CO11N and hide it.
In t code SHD0, give the transaction variant name ( say ZCO11N )of ur std CO11n.
CO11N screen will appear, when u will save the variant, u will getgood movement tab , it will hide now.
Activate the transaction variant.
Regards,
R.Brahmankar -
Goods Movement through order confirmation for IS oil material
Hello Experts,
I am doing the goods issue posting through the confirmation transaction CORK for process order. The materials that I am posting are IS oil relevant.
When Iam trying to save the confirmation, system is taking to the screen of additional quantity calculation for each materials. When I maintain the details, system is saving the confirmation. But in case if there is a change in the parameters mentioned for additional quantity calculation, system is not giving any option.
In other goods issue transactions, we can see a calculator button which will take us to the quantity calculation screen, if we double click a line item. But I dont find this option in the goods movement screen through order confirmation transactions.
Is there any way to activate it in confirmation screen also, so that we can individually maintain the qty calculation parameters of each goods issue item?.
Appreciate your earliest reply
Thanks & Regards
PrathibNo Inputs?????
-
Problem with goods movement during operation confirmation
Hello,
While doing the operation confirmation,the goods movement are not posted for the components attached to that operation i.e i am not getting the quantity of the components in the "goods movement" tab while confirming.
check points done: 1) Final confirmation tick is activated during ope. confirmation.
2) Backflushing is activated for material(componenets that areattached to that operation).
please let me know what is the reason for not getting the qty displayed in the "Goods Movement" tab
Thank you.
Regards
Santoshhi
Normally if you activated the backflush for the material in the order,the material wont be displayed in the goods movement tab unless you activated the All materials in the parameters for confirmation in the intial screen of IW41
kindly check
regards
thyagarajan -
Restrict all goods movements for materials untill the latest costing run ex
Hi dudes,
1 here i have a requirement that i need to restrict all goods movements in the month for all materials(SFG,FG) untill the latest costing run(standard cost estimate) on 1st of each month.
2. Can we restrict the status of process order in such a way that Conformation can be done only after the goods issues against production order. The goods receipt can be done only after the conformation of the process order.
Thanks in advance.
Robert.Robert,
Procedurally you can block, by not opening the current period, before the costing run is completed, just when you wanted to release the cost estimate, at that time you can lock all users and then open the next period and then release your cost estimate and then unlock all the users. You need to work with your Basis/MM/FICO guys to have this procedure implemented.
On the GI Check before confirmation and Confirmation check before GR, you can use Confirmation and GR releated User exits to check. There are many posts on this topic, a simple search on this forum would take you to the thread.
Regards,
Prasobh
Maybe you are looking for
-
I upgraded to ios 7.1 and even after i updated to this new version in the calendar view i could get a list of all appointments and now i have done something and i get a half scrren of calendar and half screen of appointments. is their anyway to get
-
Hi, i am getting following error, while taking RMAN backup. ORA-01580: error creating control backup file /backup/snapcf_TST.f ORA-27054: NFS file system where the file is created or resides is not mounted with correct options DB Version:10.2.0.4.0 w
-
LabVIEW file browser can't see folders
I am using LabVIEW 7.0 on Sparc Solaris 2.6. I am using NFS to serve folders from a RHEL5 linux server. These folders contain my LabVIEW code, and I am mounting them on my Sparc Solaris workstation. When I open the LabVIEW file browser, some folde
-
Window Menu Entry and Keyboard Shortcuts
I have defined a menu entry that appears in two places in the menu hierarchy File->My PlugIn->Info and Window->My PlugIn->Info using a PanelList definition of // Asset retrieval panel resource PanelList (kMMAssetRetPanelResourceID) kMyPaletteID, init
-
After vacation why is my eMac not working right?
I shut my eMac down for five weeks this Summer. Ever since I've gotten back it has frozen when iTunes are opened. After hooking up an ethernet cord I can usually download podcasts without the eMac freezing. I don't know if the Airport Express is the