Good News For EMU1616M User work in Windows 7 X64 version

I'd tried to find many forums before I install windows 7 UIL. X64 , because I've got many VST plugins and I scare the sound card drivers doesn't work, BUT.....
Today I couldn't wait, I just install and It all works FINE, with ASIO, could use on Cubase 5.1 and my plugins were loading faster than before!
Just use back your old EMU drivers and PatchMIX
http://www.emu.com/support/files/dow...008&Platform=1
Peace!
JLM0000 from HK

One More Thing, Someone said it doesn't work in 44100/16-24, just fine on 48000/16-24 BUT....!!!!!
I'd tried 44100 and 48000 both with 16 and 24 bit , to playback mp3s with DirectX sound ,OR Cubase projects ASIO playback....e.t.c.....
BOTH WERE WORKS!!
but there have a tricks to do so...
Not just change your patchmix , should be go to Control Panel-> Sound ......
there should have a blank for you to choose sample rate, please match it equally with your patchmix!l

Similar Messages

Good news for Winchester users and CPU temp. reading after S3 suspend

Bios 3.95 seems to solve all my previous problem with CPU temperature readings after S3 suspend state.
Now the temperatures are after S3 the same as before (15 degree C lower). So Speedfan's control of fans is more precise now. My CPU fan is stopped all the time, in case of warning temperature 50 deg.C, all fans go on 100% (including CPU). With this BIOS I am for the first time fully satisfied with this board.
Cool'n'Quiet is working and S3 as well. I haven't noticed any problem yet.

Quote from: rocka on 27-December-05, 00:56:39
yo wabrooke, it's amazing u managed to swap out the bios chip from the HP computer set, I got mine same as well. Is that a tedious job? Can give me some guidelines to do it as well? if not, i guess i'm going to change back to dfi soon.
no, very simple. Just turn off your system, unplug the machine, use a paperclip or something similiar, pry the bios chip upwards and pull out (make note of which way the notch is facing), insert the replacement chip, viola! Now you have pretty much the MSI oem board. I think I've heard some boards are red or something (the MSI boxed boards), unless that was an older revision, but other than that, everything else is the same. The only main thing is, if you switch out the bios chips, you can no longer run the disc image to restore the hard drive, which isn't a biggie to me, since I purchased an OEM copy of Windows XP MCE, and I also have and run Windows XP Pro.

GOOD NEWS FOR WIN 7 Home Premium USERS....

Hi Pals...
This is good news for all windows 7 users that can install DEVICE UPDATE SOFTWARE in Windows 7 Home Premium, here i can explain that how to install DEVICE UPDATE SOFTWARE in Windows 7...
1. Download DEVICE UPDATE SOFTWARE from http://nds1.nokia.com/files/support/global/phones/software/NokiaSoftwareUpdaterSetup_en.exe
2. Right click on that installer file and select PROPERTIES and then select COMPATIBILITY then CHECK the box on
COMPATIBILITY MODE then browse the list and select WINDOWS VISTA SERVICE PACK 2 (if service pack 1 then select 1) and then click on OK... Thats it ur ready to install DEVICE UPDATE SOFTWARE in Windows 7....
Note : This is my own trick and this trick is success, B'cas i m hardware engineer and i knw this tric is not harmfull to any pc or laptops/notebook , so do it this all above step without fear TRUST ME PALS.. Lets enjoy.... THx
Message Edited by kamlesh_sexy on 12-Jan-2010 04:28 PM

No is does not work, it gets installed. But does not work. When we click on the installed NSU.
The Nokia startup screen stays on and nothing happens.
Please do not give wrong trick.
I have tried it on Win 7 (Prof & Ultimate) Same problem, i have tired on 2 diffrent systems.
nokia will be coming out with new NSU 2.4.2 soon, Kindly do wait for it.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

I changed my Apple ID and all was good except for my mac. A window keeps popping up with my old ID for the iCloud. I ran out of solution. can some help

I changed my Apple ID and all was good except for my mac. A window keeps popping up with my old ID for the iCloud. I ran out of solution. can some help

Sign out of iCloud on your Mac, then sign back in with the new ID.

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

GOOD NEWS FOR THE NANO!!!

"They claim current iPods can already play video (but this is disabled) which means an updated firmware might enable movie playback, something not infeasible given the power of the iPod hardware platform."
http://engadget.com/page/3 -- scroll down to "Think Secret thinks we'll see a video iPod Tomorrow" and read the update!!
This is good news for all those who may be regreting buying the nano. (I don't, it's flash-newer technology, hard drive skips)

Yeah,
Even though the screen on the Nano is small, I would still welcome video playback. I don't think copying full DVD's onto the Nano is practical given the storage size unless there is a way to compress video/DVD content to be loaded on to the Nano. You would be able to hold maybe 1 or 2 full DVD movies plus your music library. The new video iPod and regular iPods have much larger storage for things like full quality audio and video.
I welcome the ability to play Quick Time content, though.
Have a lot of video/movies in QT format and the sound would probably be great over headphones.
I do not regret buying a Nano, though. The Nano is an impressive piece of technology and still a good-looking device for playing any audio/video/image content.
I hope apple does release a firmware updater to recent iPods for video playback.
This would just make the Nano even more slicker device.

Mac mini wanting to upgrade from 10.5.8 to anything newer for safari to work properly

I have a problem. certain sites are not working because my safari will not support the changes they have made to the website. ei. cannot see anything i want to or update my profiles. I have a mac mini with 10.5.8. and need to upgrade to newer for things to work. these are my specs for my 2009 mac mini...
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version (system): 1.19f2
Serial Number (system): YM7503MPYL1
Hardware UUID: 00000000-0000-1000-8000-0016CBAD8BAD
I dont know what else i need to get it to work. and my mother is having the same problems with hers because her os for her mac mini is a 10.4.4. so i need to get hers upgraded as well for her work. she will have less power as my mac as her mini is older. will it still work or will i need to find her a new computer?

Choose About this Mac from the Apple menu and check the processor.
A PowerPC Mac mini can’t be upgraded past 10.5.8.
For a Core Duo Mac, click here, install the DVD, and run Software Update.
For your Mac mini, upgrade it as if it was a Core Duo Mac, and once done, if desired, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
(122228)

Want Central Goods Recipient for all users

Hi All,
We want to manitain Central Goods Recipient for all users, now the Recipient is the Goods reciever.
How will we do configuration for this.
We have 5 users in one Org. Unit, how we will make one as default.
Thanks
Ravi

Satish,
I did not quite get what you are trying to say.Could you please be more detailed.The below is my requirment and we are on ECS.
I want to have a specific user as the central goods receipent.This user must be able to confirm goods and services for PO's created by all other users in that organization.
My understanding from this thread is that,this can be achived by assigning the role "SAP_BBP_STAL_RECIPIENT",to that user and that user will be able to confirm goods and services for all PO's created by other user also.I tried to do the same and expected to see all PO's created by all other users when i click "Confirm Goods/Services centrally" .
Thanks

ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

Help -- Getting my Audigy Pro 4 RM-1500 working in windows 7 X64

@Help -- Getting my Audigy Pro 4 RM-500 working in windows 7 X64. To anyone who can help
?I used the latest version of daniel_k's most excellent drivers to install?my Audigy Pro 4 ?(with external box) on a Windows 7 X64 operating system and all the audio devices I have tested so far have worked great.
However, I can't seem to get the rm-500 remote working. I have installed the lasted (0/30) version of mediasouce5;? and the drivers for my remote do not seem to be included.
The closest I can come is the beta version of the vista entertainment center which does install a remote control settings configuator. However, it doesn't seem to recognice the Audigy Pro 4's version of the rm-500, even though it is listed as an option. I get a "can't find an ir device" error.
Any suggestions for me as to how I can get it working, if it all?
Much Thanks!
Jackalope

D When I was beta testing Windows 7, I had the same problem with my remote for X-Fi Platinum Fatalty Champion. I discovered a program called Intelliremote (just Google it) that worked great. It works with Creative remotes. I found for some reason the beta driver of entertainment center, in compatibility mode, works with the final version of Win 7. I hope this hel
ps.

At last some good news for UK iPhone users

After the UK users seemingly getting a raw deal from from Apple as of late (no Atv price drop or movies etc), a report on Pocket lint informs us that our tariffs will be moving into line with their non iPhone tariffs in Feb. below is a copy but for more info check it out.
The three current tariffs for iPhone will be brought in line with the minute and text bundles offered on the new tariff structure.
iPhone customers on a £35 per month contract will get three times more minutes and more than double the number of texts than before.
The new £45 iPhone tariff gives the same amount of minutes and texts as the former £55 tariff so customers who were on the £55 tariff can either save £10 per month or take the new £75 tariff with 3000 minutes and 500 texts a month.
All iPhone customers will continue to receive "unlimited" data browsing and access to The Cloud's Wi-Fi hotspots.
Roll on Feb
Message was edited by: Grant Davies

This is indeed good news! Well done O2!
This is from the O2 iPhone 'Pay Monthly consumer airtime contract for iPhone (November 2007)'
5.15 You may move to another iPhone tariff at any time, provided that you may only change tariffs a maximum of once per month. Changing tariffs will not affect your Minimum Period. You will not be able to move to a general O2 Pay Monthly tariff. Where you have notified us you wish to move to an alternative iPhone tariff, unless we advise otherwise, your new tariff will commence at the start of your next billing cycle.
I hope to move from the old £45 > new £35 Tariff (£120 a year saving).
Would be good to hear of any experiences from other UK iPhone users attempting to do this or similar.

Good News For K8N Neo Platinum Users!!!

Ok, after fiddling with my BIOS for almost 2 days now, and scanning the forums for a solution, I contacted MSI Technical Support in California, USA. They are sending me a new BIOS chip, free of charge, so anyone having a severe problem with BIOS revisions 1.8 and 1.9 on the K8N Neo Platinum (MS-7030) please give tech support a call, I let them know I would be posting this in the forum and they will be inandated with phone calls, but woohoo, they are sending a new chip pre-flashed with BIOS revision 1.7.
Please refer to this thread for the reasons why:BIOS v1.9 Is Terrible

What good news? UK based MSI did not offer any such replacement bios after my problems updating to 1.8 bios.
I purchased a new bios chip with 1.9 bios from a UK supplier.....after fitting the bios I returned to the same problems as before, failure to boot past post and freezing in bios menu. I then remembered another post on this sight and removed one stick of memory......everything back to normal .I have just fitted a 1gb Corsair cas 2 memory and all seems well I will save my 2X 512 Corsair XL my next project which will not be a MSI Motherboard
MSI UK have not come out of this very well and from the posts that I have read there are quite a few people out there with problems. Many thanks to all those who posted on this, it certainly helps to know that you are not the only one with problems.
MSI K8N Neo ...AMD 3400 Newcastle
Zalman Cooller CNPS7000A
1 X 1Gb Corsair 3200C2PT
Gainward 6600GT Golden Sample GLH
550W Enermax Power Pack(EG651P-VE)
Sound Blaster Audigy
Seagate 300 Gb Hard Drive

The book who I selected doesn't move to the right in CheckedListBox and the reason is that I can't make an return.his code is good just for first user who I selected

Imprumut = loan
I have 6 tables:
I have one combobox(from where I select utilizatori(users)) and 2 CheckedListBox(Between first box and second box I have 2 buttons:imprumuta(loan) and restituie(return))
This c# code works just for first user: Utilizator, but something's not good. When I add new utilizator(user) and select it, the loan will be add in my SQL DataBase, but... the book who I selected doesn't move to the right in CheckedListBox and the reason
is that I can't make an return
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using MySql.Data.MySqlClient;
namespace proiect
public partial class Imprumut : Form
MySqlConnection con = new MySqlConnection("DataSource=localhost;UserID=root;database=biblio1");
//stabilim conexiunea
MySqlCommand comUser;//interogarea pe baza careia umplem comboBox
MySqlDataAdapter adaptu;
DataTable userT = new DataTable();
MySqlCommand cmdCarti;//interogarea pe baza careia umplem checkListBox
MySqlDataAdapter adaptCarti;
DataTable CartiTabel = new DataTable();
MySqlCommand cmdCartiImprumutate;//interogarea pe baza careia umplem checkListBox
MySqlDataAdapter adaptCartiImprumutate;
DataTable CartiImprumutateTabel = new DataTable();
public int UserId
get
return Convert.ToInt32(user.SelectedValue.ToString());
void Completez_Combo_User()
try
comUser = new MySqlCommand("SELECT n.userid, CONCAT(n.UserName) as UserN FROM users n left join userroles us on n.userid=us.userid left join roles r on r.roleid=us.roleid WHERE r.roleid='3'",
con);
adaptu = new MySqlDataAdapter(comUser);
adaptu.Fill(userT);
user.Items.Clear();
user.DataSource = userT;
//DataTable din care sunt preluate datele pentru ComboBox user
user.ValueMember = "UserID";
//Valoarea din coloana UserID nu se afiseaza in combobox
user.DisplayMember = "UserN";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Completez_CheckList_Carti()
try
cmdCarti = new MySqlCommand("SELECT BookID, CONCAT(title, ' ', ISBN,' ',author)as date_carte FROM books WHERE NumberLeft > 0 ORDER BY BookID", con);
adaptCarti = new MySqlDataAdapter(cmdCarti);
adaptCarti.Fill(CartiTabel);
imp.Items.Clear();
//carti.DataSource=null;
imp.DataSource = CartiTabel;
//DataTable din care sunt preluate datele pentru ComboBox carte
imp.ValueMember = "BookID";
//Valoarea din coloana BookID nu se afiseaza in combobox
imp.DisplayMember = "date_carte";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Completez_CheckList_Cartires()
try
cmdCartiImprumutate = new MySqlCommand(string.Format("SELECT b.BookID, CONCAT(title, ' ', ISBN,' ',author) as date_carte FROM books b inner join userbooks ub on ub.bookid = b.bookid
WHERE ub.userid = {0} ORDER BY BookID", UserId), con);
adaptCartiImprumutate = new MySqlDataAdapter(cmdCartiImprumutate);
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
res.Items.Clear();
//carti.DataSource=null;
res.DataSource = CartiImprumutateTabel;
//DataTable din care sunt preluate datele pentru ComboBox carte
res.ValueMember = "BookID";
//Valoarea din coloana BookID nu se afiseaza in combobox
res.DisplayMember = "date_carte";
//Eelementele afisate in combobox, preluate din concatenarea mai multor coloane
catch (Exception ex)
MessageBox.Show(ex.Message);
void Inregistrez_imprumut_in_BD()
int useridu = Convert.ToInt32(user.SelectedValue.ToString()); //useridu = id book
int bookidi;
try
DateTime azi = System.DateTime.Now; // Data imprumutului
DateTime atunci = termenul.Value; // Data restituirii
MySqlTransaction tranzactie = con.BeginTransaction();
MySqlCommand adaugImpr = new MySqlCommand("INSERT INTO bookshistory(UserID, BookID,BorrowDate) VALUES(@UserID, @BookID, CAST(@BorrowDate as datetime))", con);
MySqlCommand scadCarti = new MySqlCommand("UPDATE books SET numberleft=numberleft-1 WHERE bookid=@bookid", con);
MySqlCommand adauga_userbooks = new MySqlCommand("INSERT INTO userbooks(userId,bookID)VALUES(@userID,@bookID)", con);
adauga_userbooks.Transaction = tranzactie;
adaugImpr.Transaction = tranzactie;
scadCarti.Transaction = tranzactie;
try
foreach (int i in imp.CheckedIndices)
imp.SelectedIndex = i;
bookidi = Convert.ToInt32(imp.SelectedValue.ToString());
MessageBox.Show(bookidi.ToString());
//bookidi va fi id-ul cartea bifata, pe rand din checklistBox
//Inregistrez in tabela imprumut
adaugImpr.Parameters.AddWithValue("@UserID", useridu);
adaugImpr.Parameters.AddWithValue("@BookID", bookidi);
adaugImpr.Parameters.AddWithValue("@BorrowDate", azi);
adaugImpr.ExecuteNonQuery();
adaugImpr.Parameters.Clear();
adauga_userbooks.Parameters.AddWithValue("@userID", useridu);
adauga_userbooks.Parameters.AddWithValue("@bookID", bookidi);
adauga_userbooks.ExecuteNonQuery();
adauga_userbooks.Parameters.Clear();
//Scad numarl de carti disponibile pentru cartea imprumutat
scadCarti.Parameters.AddWithValue("@bookid", bookidi);
scadCarti.ExecuteNonQuery();
scadCarti.Parameters.Clear();
tranzactie.Commit();
catch (Exception ex)
tranzactie.Rollback();
string message = ex.Message;
if (ex.Message.ToLower().Contains("duplicate entry"))
message = "Una dintre carti mai exista deja";
MessageBox.Show(message);
catch (Exception ex)
MessageBox.Show(ex.Message);
void Inregistrez_restituire_in_BD()
int useridu = Convert.ToInt32(user.SelectedValue.ToString()); //useridu = id book
int bookidi;
try
DateTime azi = System.DateTime.Now; // Data imprumutului
DateTime atunci = termenul.Value; // Data restituirii
MySqlTransaction tranzactie = con.BeginTransaction();
MySqlCommand modificIstoric = new MySqlCommand("UPDATE bookshistory SET returndate = @returnDate WHERE userID = @userID AND bookID = @bookID", con);
MySqlCommand adaugCarti = new MySqlCommand("UPDATE books SET numberleft = numberleft + 1 WHERE bookID = @bookID", con);
MySqlCommand sterge_userbooks = new MySqlCommand("DELETE FROM userbooks WHERE userID = @userID AND bookID = @bookID", con);
sterge_userbooks.Transaction = tranzactie;
modificIstoric.Transaction = tranzactie;
adaugCarti.Transaction = tranzactie;
try
foreach (int i in res.CheckedIndices)
res.SelectedIndex = i;
bookidi = Convert.ToInt32(res.SelectedValue.ToString());
MessageBox.Show(bookidi.ToString());
//bookidi va fi id-ul cartea bifata, pe rand din checklistBox
//Inregistrez in tabela imprumut
modificIstoric.Parameters.AddWithValue("@UserID", useridu);
modificIstoric.Parameters.AddWithValue("@BookID", bookidi);
modificIstoric.Parameters.AddWithValue("@returnDate", termenul.Value);
modificIstoric.ExecuteNonQuery();
modificIstoric.Parameters.Clear();
sterge_userbooks.Parameters.AddWithValue("@UserID", useridu);
sterge_userbooks.Parameters.AddWithValue("@BookID", bookidi);
sterge_userbooks.ExecuteNonQuery();
sterge_userbooks.Parameters.Clear();
//Scad numarl de carti disponibile pentru cartea imprumutat
//adaugCarti.Parameters.AddWithValue("@bookid", bookidi);
adaugCarti.Parameters.AddWithValue("@bookid", bookidi);
adaugCarti.ExecuteNonQuery();
adaugCarti.Parameters.Clear();
tranzactie.Commit();
catch (Exception ex)
tranzactie.Rollback();
MessageBox.Show(ex.Message);
catch (Exception ex)
MessageBox.Show(ex.Message);
public Imprumut()
InitializeComponent();
try
con.Open();
catch (Exception ex)
MessageBox.Show(ex.Message);
Completez_Combo_User();
Completez_CheckList_Carti();
Completez_CheckList_Cartires();
//selecteaza_carti_utilizator();
// Initializez termenul din dateTimePicker la data de peste 15 zile fata de data sistemului
termenul.Value = System.DateTime.Now.AddDays(15);
private void imprumuta_Click(object sender, EventArgs e)
Confirmare c = new Confirmare("Confirmati imprumutul?");
DialogResult dr = c.ShowDialog();
if (dr == DialogResult.Yes)
try
Inregistrez_imprumut_in_BD();
MessageBox.Show("Imprumutul a fost inregistrat");
//Dupa inregistrarea imprumutului o parte din carti nu mai sunt disponibile pentru imprumut
//Reincarc in CheckList cu Carti noua lista cu carti ramase dupa imprumut
//Pentru asta "resetez" datele din dataTable cartiT (sursa pentru carti.DataSource)
CartiTabel.Clear();
adaptCarti.Fill(CartiTabel);
CartiImprumutateTabel.Clear();
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
catch (Exception ex)
MessageBox.Show(ex.Message);
if (dr == DialogResult.No)
MessageBox.Show("Imprumutul NU a fost inregistrat");
imp.ClearSelected();
//deselecteaza cartea selectat
foreach (int i in imp.CheckedIndices)
imp.SetItemChecked(i, false);
//debifeaza cartile bifate
//if (imp.CheckedItems.Count > 0)
// //res.Items.Clear();
// foreach (string str in imp.CheckedItems)
// res.Items.Add(str);//adauga in partea cealalta, imprumuta
// while (imp.CheckedItems.Count > 0)
// imp.Items.Remove(imp.CheckedItems[0]);
private void restituie_Click(object sender, EventArgs e)
Confirmare r = new Confirmare("Confirmati restituirea?");
DialogResult dr = r.ShowDialog();
if (dr == DialogResult.Yes)
try
Inregistrez_restituire_in_BD();
MessageBox.Show("Restituirea a fost inregistrata");
//Dupa inregistrarea imprumutului o parte din carti nu mai sunt disponibile pentru imprumut
//Reincarc in CheckList cu Carti noua lista cu carti ramase dupa imprumut
//Pentru asta "resetez" datele din dataTable cartiT (sursa pentru carti.DataSource)
CartiTabel.Clear();
adaptCarti.Fill(CartiTabel);
CartiImprumutateTabel.Clear();
adaptCartiImprumutate.Fill(CartiImprumutateTabel);
catch (Exception ex)
MessageBox.Show(ex.Message);
if (dr == DialogResult.No)
MessageBox.Show("Restituirea NU a fost inregistrata");
res.ClearSelected();
//deselecteaza cartea selectat
foreach (int i in imp.CheckedIndices)
res.SetItemChecked(i, false);
//debifeaza cartile bifate
if (res.CheckedItems.Count > 0)
foreach (string str in res.CheckedItems)
imp.Items.Add(str);
while (res.CheckedItems.Count > 0)
res.Items.Remove(res.CheckedItems[0]);
private void button2_Click(object sender, EventArgs e)
con.Close();
this.Close();
//private void selecteaza_carti_utilizator()
// res.Items.Clear();
// MySqlCommand selectcart = new MySqlCommand("select title from books,userbooks where userbooks.userid='" + user.SelectedValue.ToString() + "' and userbooks.bookid=books.bookid", con);
// MySqlDataReader reader = selectcart.ExecuteReader();
// try
// while(reader.Read())
// res.Items.Add(reader["title"]);
// catch(Exception ex)
// MessageBox.Show(ex.Message);
// finally
// reader.Close();

Hello Vincenzzo,
This issue seems to be a window form UI implemented related issue, for this i suggest that you could ask it to the windows form forum:
http://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winforms
The current forum you posted to is used to discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do you set default programs for all users when deploying Windows 8.1?

I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
to be the default for opening pictures, videos, etc. Can that be done?

Great question, this has been bugging me too!
So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
After filtering out the junk, I could see some *interesting* writes to the registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
"Hash"="57y87/ogggU="
"ProgId"="PhotoViewer.FileAssoc.Jpeg"
But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers. This is both good news and bad.
Background:
One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
Solution:
This blog appears to have the answer:
http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
From:
<Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
To:
<Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
perhaps seperate GPO's for Desktops/Laptops vs Tablets?
-k
Keith Garner - keithga.wordpress.com

Good News For EMU1616M User work in Windows 7 X64 version

Similar Messages

Maybe you are looking for