GOOD NEWS regarding Sony Oxford Plugs!

Just got an email back from Sony regarding my question to them on when will their AU version of their Oxford plugs be available. Below is their response to me.
Hi Steven,
Very close. We are in the middle of a beta phase for AU versions of our EQ, Limiter and Dynamics. Should be ready for release in a couple of weeks. Other plugins will follow.
best regards
rod densham

Yeah I got a notice about this. Nice thing is that
if you have other versions (I have powercore) you'll
get the AU's too!!!!!
I am not following ya sondod? Explain please.

Similar Messages

Good News Regarding Red and PPro 4.1

In case anybody is interested...
http://reduser.net/forum/showthread.php?t=29710

"I said: Adobe R3D should be as easy as DV." [I like this guy]
"They said: Lets do it. and make it even better." [Finally someone gets it.]

I have a new Apple TV, I plugged it in yesterday and it worked fine. I then did the update and went to bed. Today I can't get the Apple TV to turn on again! HELP

I have a new Apple TV, I plugged it in last night and it worked fine, I then, I was mirroring with my iPad and everything. It then prompted me to to the update so I hit update and went to bed. Today I can't turn the Apple TV on!
It just says no signal on my tv.
I've tried pressing menu and down arrow for 6 seconds, an apple appears on my tv screen but then it goes back to saying no signal!
Is it broken?

Check these troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
AC

HT5868 I am not hooking up to a new computer - I just plugged into the same computer and it asked me this Trust My Computer question. I hit Trust - yet it still doesn't seem to find the device on my computer. It doesn't show up in my iTunes list of devi

I am not hooking up to a new computer - I just plugged into the same computer and it asked me this Trust My Computer question. I hit Trust - yet it still doesn't seem to find the device on my computer. It doesn't show up in my iTunes list of devices.

Hi Dalegu219,
Thanks for visiting Apple Support Communities.
If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
You can use these steps to make sure iTunes is opening the library on your external drive:
If iTunes is running, quit iTunes.
If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
If you're using a Mac, open iTunes and immediately hold down the Option key.
You should see one of these screens:
Pick Choose Library and locate the library on your external hard drive.
From:
iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
iTunes: How to re-create your iTunes library and playlists - Apple Support
Best Regards,
Jeremy

Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access it. Please help.

Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access the store. Please help.

If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK.

With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

Having same issue here:
https://discussions.apple.com/message/19043181#19043181

GOOD NEWS FOR THE NANO!!!

"They claim current iPods can already play video (but this is disabled) which means an updated firmware might enable movie playback, something not infeasible given the power of the iPod hardware platform."
http://engadget.com/page/3 -- scroll down to "Think Secret thinks we'll see a video iPod Tomorrow" and read the update!!
This is good news for all those who may be regreting buying the nano. (I don't, it's flash-newer technology, hard drive skips)

Yeah,
Even though the screen on the Nano is small, I would still welcome video playback. I don't think copying full DVD's onto the Nano is practical given the storage size unless there is a way to compress video/DVD content to be loaded on to the Nano. You would be able to hold maybe 1 or 2 full DVD movies plus your music library. The new video iPod and regular iPods have much larger storage for things like full quality audio and video.
I welcome the ability to play Quick Time content, though.
Have a lot of video/movies in QT format and the sound would probably be great over headphones.
I do not regret buying a Nano, though. The Nano is an impressive piece of technology and still a good-looking device for playing any audio/video/image content.
I hope apple does release a firmware updater to recent iPods for video playback.
This would just make the Nano even more slicker device.

Unable to update to ios 5 on windows 7. please can someone help me i have tried everything? i deleted itunes and downloaded the new version when i plug my iphone 4 in it does a back and then I try and update the software it extracts error 3194

unable to update to ios 5 on windows 7. please can someone help me i have tried everything? i deleted itunes and downloaded the new version when i plug my iphone 4 in it does a back and then I then everything runs normal and it extracts and then i get an error code at the end 3197. had the iphone for two months and its new.
Please can somene help me, i am currently on version 4.3.3 (8J2)
Modem Firmware 04.10.01

followed someones instructions and it has worked ios 5 is now working on my iphone 4

Does ipod nano automatically pick up new purchases when I plug it in to the computer?

When I bring new music into my itunes library the song is checked. will the nano automatically pick up new purchases when I plug it in again? Or do I have to start over? I hit sync again but not sure whether I have to do that every time I charge it.

Depends on how you have your iPod set up to Sync. For example if your iPod is configured to sync only checked songs and videos, make sure each new track you add to iTunes has a tick mark next to it. The next time you sync your iPod (assuming it set up to automatically sync), the new tracks will be added.
B-rock

At last some good news for UK iPhone users

After the UK users seemingly getting a raw deal from from Apple as of late (no Atv price drop or movies etc), a report on Pocket lint informs us that our tariffs will be moving into line with their non iPhone tariffs in Feb. below is a copy but for more info check it out.
The three current tariffs for iPhone will be brought in line with the minute and text bundles offered on the new tariff structure.
iPhone customers on a £35 per month contract will get three times more minutes and more than double the number of texts than before.
The new £45 iPhone tariff gives the same amount of minutes and texts as the former £55 tariff so customers who were on the £55 tariff can either save £10 per month or take the new £75 tariff with 3000 minutes and 500 texts a month.
All iPhone customers will continue to receive "unlimited" data browsing and access to The Cloud's Wi-Fi hotspots.
Roll on Feb
Message was edited by: Grant Davies

This is indeed good news! Well done O2!
This is from the O2 iPhone 'Pay Monthly consumer airtime contract for iPhone (November 2007)'
5.15 You may move to another iPhone tariff at any time, provided that you may only change tariffs a maximum of once per month. Changing tariffs will not affect your Minimum Period. You will not be able to move to a general O2 Pay Monthly tariff. Where you have notified us you wish to move to an alternative iPhone tariff, unless we advise otherwise, your new tariff will commence at the start of your next billing cycle.
I hope to move from the old £45 > new £35 Tariff (£120 a year saving).
Would be good to hear of any experiences from other UK iPhone users attempting to do this or similar.

I authorized a new computer for iTunes, plugged my phone into computer and now all of my songs in iTunes are not in my account and are missing from my phone. Help!

I authorized a new computer for iTunes, plugged my phone into computer and now all of my songs in iTunes are no longer in my account, on computer or in iphone Help!

Media is only where you put it.
Did you copy or move the media from the old computer to the new computer?

New AJAVideo Mac & Windows Plug-Ins for @Adobe CS6

New #AJAVideo Mac & Windows Plug-Ins for @Adobe #CS6 now available! Read more http://bit.ly/IfTKL9 download http://bit.ly/JcwWfx

First off - yay.
In the little amount of time I have had to test, the first thing I notice is that the video out to my ext. monitor seems to lag by a few frames from the program monitor in Pr. AJA support is great in their help, but I'm wondering before I bother them, is anyone else seeing this - is there a setting to be tweaked?
Also, the video out is looking a touch soft to me - I have a Flanders Scientific Grade 1 monitor, so it is not the hardware. I may need to test this a bit more with other footage, but it was my first impression. Wonder if the settings here need to be tweaked as well.
I had visions that Transmit would output the hoverscrub, but it looks like you have to click on the clip and play back before it is displayed exernally. But, on second thought, I don't know how that would be utilized, since the video out would have to suddenly switch every time you hover your mouse over the clips in the bins.
Having said all that, I am thrilled to finally have this driver!

DiskWarrior 3.0.3 and QT 7.1 good news

Good news. DiskWarrior no longer crashes on exit after installing QT 7.1.
QT 7.0.4 would cause DiskWarrior 3.0.3 to crash after performing repairs.

QT 7.1 does NOT fix the crash on exit from DiskWarrior 3.0.3
Turns out I had forgotten that I renamed the sound file in the app package that fixed it for QT 7.0.4.

Some GOOD news at last !!!!

Hey guys...aftert all that frustration and trying to make iTunes 7.6 work and no luck I downgraded back to 7.4.3...and after downgrading I noticed a tip that I missed earlier saying to check if I have Smart Card installed...I didn't have it...and after installing it, the error ''drivers are missing or corrupted, iTunes might not be able to communicate wiht iPod'' DISAPPEARED !!! And I can acces the iTunes store faster than ever !!! I'm happy, but I don't have the guts to try and instal the latest version of iTunes again...I'll stay at this version until Apple discovers the actual problem...
Message was edited by: elibo17

This is indeed good news! Well done O2!
This is from the O2 iPhone 'Pay Monthly consumer airtime contract for iPhone (November 2007)'
5.15 You may move to another iPhone tariff at any time, provided that you may only change tariffs a maximum of once per month. Changing tariffs will not affect your Minimum Period. You will not be able to move to a general O2 Pay Monthly tariff. Where you have notified us you wish to move to an alternative iPhone tariff, unless we advise otherwise, your new tariff will commence at the start of your next billing cycle.
I hope to move from the old £45 > new £35 Tariff (£120 a year saving).
Would be good to hear of any experiences from other UK iPhone users attempting to do this or similar.

I just recently bought a PC, and I just spent some money on some new songs. I plugged my iPod into the computer and my photos immediately began to sync to my photos library, but my music will not move to my iPod. Suggestions? Thanks!

I just recently bought a PC, and I just spent some money on some new songs. I plugged my iPod into the computer and my photos immediately began to sync to my photos library, but my music will not move to my iPod. This did not happen on my old PC. Suggestions? Thanks!

The transfer purchases option only works for tracks that were purchased from the iTunes Store. You'll need the help of third party software to extract all other non-iTunes purchased content and music. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

GOOD NEWS regarding Sony Oxford Plugs!

Similar Messages

Maybe you are looking for