Good receipt against multiple storage location
Hello All,
I have a senereo where more than one project is going on. In my case there are 200 common materials
which are required for all the project. Every project is having their own storage locations.
I am creating PO for material containing the common reqt of all the project but at the time of good receipt
as usual it is going to only one storage location casue every material has only one storage location in material master.
Now please guide me is it possible to do the good receipt with multiple storgae location at one time itself?
Thanks in advance.
Shailesh
Hi Sandeep, (Please read without acct assignment please)
I must thanks u whole heardly as due to ur answere my big question got solved. Well i have add ur gmail id in to my freind list. I am sure u won't mind & u will help me in future too.
Well one more ques. i have .Can we create PO ( with out Acct assignment ) where we can put 2 diff. storage location for a single material. I mean insted of distributing the qty in migo level can we distribute this qty at PO level ?
2) Is there any thing provision in MM where we could delivery any notes against any PO to the good receipent at the time of MIGO. I require this as per the last case that at the time of migo , good recceptant can distribute the qty to differnt storage location but how can he come to know unless we inform him by means of any text notes in PO or is ther any other methode from which good receptient can know how much qty to be distribute?
Thanks in advance
Edited by: Shailesh Dulange on Apr 11, 2008 5:08 PM
Similar Messages
-
Multiple Goods Receipts Against Same Excise Invoice
All SAP Gurus,
We are having a scenario in which we need to do Multiple Goods Receipts Against Same Excise Invoice.
How it can be done?
Regards,During first GR in the excise header tab select "Capture excise amount".
In the excise item tab enter in the EI quantity the total qty in invoice. In the quantity tab enter the qty which is to be received.
Post the gr.
During second gr in the excise header tab select "Only refer excise invoice". -
Idoc Type for Goods Receipt against a PO
Hi ,
The Goods Recept is already done in my legacy system, So my interface updates the goods receipt in SAP based on goods receipt done in Legacy system.
I receive following data:
Plant
Purchase Order Number
Line Item
Pack List Number
Material Number
Quantity
Storage Location
GM_CODE = '01'
MVT_IND Movement indicator = 'B'
So I want which Standard Idoc Type I can use for this.
I reffered to Note 833603.
In that
1. WMMBXY (WMMBID01, WMMBID02) and
2. MBGMCR (MBGMCR01, MBGMCR02) is mentioned.
Which one I should Use, as this GR is done again PO so its mandatory for me to pass Purchase Order Number and line item.
Plz guide me which IDOC type i shd choose.Hi,
Use the message type WMMBXY, IDOC Type as WMMBID02 and the function module is L_IDOC_INPUT_WMMBXY (Process Code WMMB) to process the Goods Receipt against a PO.
I have successfully used that in many projects till now.
Please let me know if you have any queries.
Thansk,
Mahesh. -
Goods receipt against process order with inbound idoc
Hi Experts,
We need to post good receipt against process order with movement type 101 and for By-product 531.
Can we use inbound idoc-WMMBID02,with message type WMMBXY to achieve this functionality?
Or please advise if we can achieve this from any other Idoc type.
We are getting below field values for external system
1. process order number
2.plant
3.material
4.quantity in unit of entry
5.unit of measure
6.storage location
7. movement type
8.Batch
Kindly advise how can we achieve this.
Best Regards
CS261 and 262 are two different movement types INDEPENDENT of each other. I definitely know for the fact that SAP allows you to create a 262 without a 261. if you were to restrict it... you can disable access through a tcode for that mov. type 262 and ask users to use MBST to cancel any material documents created via 261 movt type.. that would ensure a smooth process
-
Error in creation of purchase materials/Goods receipt against PO(FI-MM)
Hi All,
While processing FI - MM integration iam facing below errors,request to guide me with same
1) While creation of purchase materials
Valuation class 7920 not allowed for material type Raw material Message no. M3180
Diagnosis
The combination of values you have entered is not defined in the system.
Procedure
Check your entries, and choose a valid value or combination of values with F4.
I have crossed checked in t code OMSK valuation class 7920 exists.
2) Goods receipt against PO:
Number range for trans./event type WE in year 2014 does not exist Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2014 for the transaction/event type WE.
Procedure
Contact your system administrator.
in second case i have maintained number ranges in OBA7,OMBT,still iam facing with the same issue
Regards
SantoshHi Dev,
Thanks for your reply...yea i have done the ground work before posting this query
but bitt confused with the post i have come across..
Problem was occurring due to the wrong updating of raw material instead of finished goods in MM01 (CREATION OF PURCHASE MM)
however i have over come my 2nd issue,hopefull will over come my 1st issue also
Thanks a lot
Santosh -
MIGO - Goods Receipt against Purchase order. PO rate dispaly.
Is it possible to display purchase order line item rate in MIGO - Goods Receipt against purchase order - Quantity tab.
In Quantity tab - System is showing Qty in Unit of Entry, Qty in SKU, Qty in Delivery Note, Quantity Ordered, alongwith these fields we also want display of Purchase order rate/each of that line item.
Please guide.BTW you are getting PO number at MIGO and clicking over that you will get entire PO then why you want PO rate display here??
-
Inspected stock posting to multiple storage location without batch
Hi,
At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
Quick response will be appreciated.
Anandkumar KSThe scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use. You obviously aren't using the 553 movement type as that writes off the material. That could give you two lines to use for your scraping. I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today. If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
You can also change the displayed names of the stock posting lines. That's explained in the config file as well.
Craig -
Control on creation of inspection lot during goods receipt against process
Dear Friends,
When goods receipt against process order of say quantity 100 Kg is done in PP, inspection lot for the same of origin 04 is created in QM.
My requirement is that PP should be able to post 90 Kg in quality inspection and remaining 10 Kg should directly go to
reserve sample without coming in Quality.
Is it possible?
I have tried by changing material master record in MM02 for inspection set up data. But it is not serving the purpose.
Thanks in advance,
Regards
VrishHi,
04 type of inspection is GR at the time of Production Order.
Whenever you do the production order quantity, an inspection lot is created. It will be created for full quantity which you are confirming (i.e. 100 kg will be considered and not 90 kg).
This material will be Quality Inspection.
You have to do Result recording and give usage decision.
While giving usage decision, you can allot 90 kgs to Unrestricted and 10 kgs can go as Sample what you desire.
Hope this will solve your issue.
Srini -
Automated statistical goods receipt against inbound delivery
Hi,
We have set up a process that we get a DELVRY03/DESADV Idoc from our vendor to confirm the delivery to our customer. This DESADV Idc will create an inbound delivery and a statistical goods receipt will be posted.
Now we have a new requirement, the vendor material has a serial number assigned. We get the serial number in segment E1EDL11 and it will be copied into the inbound delivery, unfortunately the statistical goods receipt will use transaction MB01 and it will post the statistical goods receipt against the purchase order details which did not contain the any serial number information.
Is there any way to set up the automated goods receipt against the inbound delivery and not against the PO?
Thank you,
FrankHi,
Anybody out there who knows how to enable an automated goods receipt against an inbound delivery?
Thank you,
Frank -
Rounding while goods receipt against outbound delivery
Hi Experts,
I have an issue regarding alternative unit of measure.
Material with base unit of measure FT,ordered unit is Meters since the alternate unit of measure has conversion factor getting decimal places while goods receipt against outbound delevry.
Is it possible to round off to nearest figure without decimals.At what level means PO,delivery,GR how we can round off.please advice with customization.
Thank you very much for your help.
Regards,
Babu
9930154536it is not possible to rounding of stock while GR through customizaton settings.
abap development is required to round off the stock. -
Goods receipt against outbound delivery
Hello,
Can we create a goods receipt against an outbound delivery document?
The transaction MIGO provides an option but for some reason I am not able to create.
The scenario is the following :
Lets say there are two DCs DC1 and DC2 : both belong to different company codes.
- Outbound delivery created by DC1,then post goods issue
- Goods receipt to be done against the above outbound delivery.
Is it possible?
(I do not want to create a PO for this.)
Regards,
LisaHi Prabhu,
I have been trying to post goods receipt against outbound delivery but here is the error I have been getting :
"Goods receipt not possible for delivery 80000059: error code 4".
Is there any specific reason for this?
Here is the process I have follwed :
-Created outbound deliveries via allocation
-Picking
-Post Goods Issue
- Migo - Goods Receipt.
Regards,
Lisa -
I/B EDI IDoC for Service Ent Sheet & Goods Receipt against PO SAP ECC 6.04
Hi EDI Experts ,
We Have ECC 6.04. We are planning to have inbound EDI IDoC for Goods Receipt against PO & Service Ent Sheet .
1.For Goods Receipt against PO I have identified below Message type:
MBGMCR / MBGMCR03 - Used in SRM Confirmation IDOC from SRM & SUS
WMMBXY/ WMMBID02- Messages Types - I remember used in last Project
Can anyone please suggest/confirm me , exactly which is most used and most suitable ?
2. For Service Ent Sheet inbound posting I unable to find any IDoC and never heard same.
( I learnet that from SUS Service entry posted in ECC by eSOA with PI ( XML).... or in other cases it may created using some BAPi)
What is exact fact ? Is there Service entry sheet can not pe posted by IDOC ? If yes, how ? if now, what is the best options ?
Thanks in advance.
Regards
NAPHi ,
In MM-SUS deployment,
Until SRM 7.0 with ECC 6.04, Service procurement using MM-SRV & SAP SUS, was not provided. But, as of “SRM 7.0, only in combination with ECC 6.04 ”, SAP standardized the “Service Procurement” scenario along with Material Procurement for MM-SUS deployment and so fully supported for Material & Services .
Please refer the Note 868192 & 1269540 and Technical scenario matrix ( criterion 18) document for details.
So for there is Enterprise Services ( eSOA) and not IDOC. Please see below messages for Services.
Create Purchase Order
PurchaseOrderERPRequest_Out_V
Outbound
Change Purchase Order
PurchaseOrderERPRequest_Out_V1
Outbound
Receives Service Entry Sheet
ServiceAcknowledgementERPCreateRequest_In
Inbound
Approve Service Entry Sheet-> Send Approval Note
ServiceAcknowledgementERPConfirmation_Out
Outbound -
Fields mapping IDOC WMMBXY to post Goods Receipt against Inbound Delivery
Hi Friends
I am testing Goods Reciept against Inbound Delivery using Inbound IDOC.
IDOC Type used WMMBXY and Function Module :
System is giving erorr message as "Document does not contain any items".
Kindly let me know segment data mapping for above IDOC type
Following data are passed to segments,
E1MBXYH-BLDAT Document date
E1MBXYH-BUDAT Posting date
E1MBXYH- XBLNR .. in this field i am passing Inbound Delivery number
E1MBXYH- TCODE ... MIGO
E1MBXYI-BEAKZ ... B Goods Receipt against Purchase Order
E1MBXYI-MATNR material number
E1MBXYI-WERKS Plant
E1MBXYI-BWART Movement Type
E1MBXYI-LIFNR Vendor code
E1MBXYI-KZBEW B
E1MBXYI-POSNR Item number in delivery
E1MBXYI-VBELN Inbound Delivery number
E1MBXYJ-VLIEF_AVIS Inbound Delivery number
E1MBXYJ-VBELP_AVIS Item number in Inbound Delivery
E1MBXYJ-WM_KZBEW Movement indicator
RajHello,
Did you recieve any answer or find a solution? I encounter a similar issue.
Thanks in advance,
Génia. -
Auto goods receipt against production order
is it possible to do auto goods receipt against production order of (material with serial number)
if not please suggest me solution
please also tell me possibility of enchancement
for goods receipt against production order
sunilHi
If you check mark the auto goods receipt in the control key used in the work center used in the routing then you can have auto goods receipts posted for the production order against a confirmation.
Rathnakar -
Goods receipt against Subcontracting PO(101 movement)
Dear ABAPer,
I want to develop the new Enhancement :Goods receipts against subcontracting PO with challan(movement type: 101) using Function module BAPI_GOODSMVT_CREATE.
please give details example using the same.
Already i was testing in standalone mode with whatever required input have been given using that function module. but i was getting error .
please give solution.
Advance thanks.
with best regards,
Velmurugan.SHi ,
Check this Code.
MOVE x_purchaseorder TO goods_mvt_tab-ebeln.
MOVE eban-bnfpo TO goods_mvt_tab-ebelp.
MOVE up_tab-feld_12 TO goods_mvt_tab-menge.
MOVE eban-werks TO goods_mvt_tab-werks.
MOVE eban-lgort TO goods_mvt_tab-lgort.
APPEND goods_mvt_tab.
LOOP AT goods_mvt_tab.
CLEAR : y_goodsmvt_header, y_return, y_goodsmvt_item, y_return.
REFRESH : y_return, y_goodsmvt_item, y_return, z_return.
MOVE sy-datum TO y_goodsmvt_header-pstng_date.
MOVE goods_mvt_tab-ebeln TO y_goodsmvt_item-po_number.
MOVE goods_mvt_tab-ebelp TO y_goodsmvt_item-po_item.
MOVE '101' TO y_goodsmvt_item-move_type. "movement type 101
MOVE 'B' TO y_goodsmvt_item-mvt_ind.
MOVE goods_mvt_tab-menge TO y_goodsmvt_item-entry_qnt.
MOVE 'PC' TO y_goodsmvt_item-entry_uom_iso.
MOVE goods_mvt_tab-werks TO y_goodsmvt_item-plant.
MOVE goods_mvt_tab-lgort TO y_goodsmvt_item-stge_loc.
* ECC6 Upgrade Begin of Change Z01K969512 #1
DATA: ls_movement_code LIKE bapi2017_gm_code.
ls_movement_code-gm_code = '01'.
* ECC6 Upgrade End of Change Z01K969512 #1
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = y_goodsmvt_header
goodsmvt_code = ls_movement_code
testrun = y_testrun
IMPORTING
materialdocument = y_materialdocument
TABLES
goodsmvt_item = y_goodsmvt_item
return = y_return.
LOOP AT y_return.
WRITE : /
y_return-type,
y_return-id,
y_return-number,
y_return-message(100).
ENDIF.
endloop.
Regards,
Sachin M M
Edited by: Sachin Mathapati on Jun 17, 2009 3:32 PM
Maybe you are looking for
-
We have two Tiger 10.4.2 running G4 and G5 that's connected to the company's Exchange server. For some reason, the Mail.app (no plug-in) on the G5 refuses to send mail to external addresses and internal works with no problem. I've compared the settin
-
Moving TM backups to another drive?
I want to use a different drive for TM backups, but I do not want to lose the ones in the current drive. Can I just copy them to the new drive and then select it as the TM drive?
-
I dropped the lamp on my macbook and it got caved in.
my lamp just suddenly fell and it landed on my macbook. So now it is caved in. So my question is can i get it fixed to make it back to look normal? becasue it is so obvious that it is caved in.
-
How do i copy imessages and sms onto icloud?
how do i copy imessages and sms on to icloud?
-
Running SJSC2.1 on XP I have a project which uses tables and DB I can not edit the JSP page (the tab for the Page1.jsp page has an asterisk) after the name. The IDE can not edit the page either, I add a table column for display and the design mode sh