Good resources and examples for making beautiful things

Hello ,
I am new in flash and I know how to work with tools and create some shapes but my problem is that I cannot create beautiful things with good filters and such like and it is because I have not seen good examples .is there any website or anything else as resource and example which I can learn how to create beautiful items(like using filters or making 3D objects and beautiful shapes and using color to give effect)?

Hi Immigrantbird,
I'm not sure if you're after a more design oriented resources rather than a flash specific one.
It might be worth doing a wider search on graphis / design principals rather than just specifically flash.
You could check out some of the examples at:
http://unitzeroone.com/blog/labs/
http://unitzeroone.com/blog/
Regards
Chris

Similar Messages

A good equipment and software for making music

Hello!
This is the situation: I´m using Garageband ´08 for making (good?) music, a USB-powered keyboard and the laptop stated below.
How would you suggest I'd do to get more instruments and better performance when editing music and playing it in realtime? I´ve sometimes thought about a Mac Pro, but as far as I discovered it didn´t improve music producing performance actually. What about those pro apps and jam packs?
Another problem is that my HDD is getting short of free space now.
I´m ready to hear your thoughts about this situation.
Kind regards
pink_snow

Well iMovie is probably the most basic editing software. This comes installed on your Mac. You should have no trouble learning how to use it after exploring the software a little.
If you want a lot more options for effects and tools and overall capabilities, Final Cut Pro X would be what you want. It's a bit more complex of a system than iMovie and can take some time to get used and learn everything the system has to offer. It might be a little pricy ($299) if your just looking to edit videos from your iPad and iPhone.
I would suggest just using iMovie first and if that doesn't do it for you, you could consider purchasing Final Cut Pro X.
*Also, there is Final Cut Express for around ~$160. This would be the simpler version of Final Cut Pro, however, this software discontinued so there would be no updates.

AppleScript resources and examples for Numbers 3

As Woggledog points out in this thread Numbers 3 now has AppleScript support (as of version 3.1). The linked article in turn has a link to some helpful resources, including working examples, at Mac OS X Automation.
It appears that the AppleScript support in Numbers 3 is now on a par with Numbers 2, perhaps already slightly better, and that many old scripts will work after minor adjustments.
Does anyone have other examples or links to sites showing useful things that can be done with AppleScript and Numbers?
SG

Hello SG,
Sorry i used this link to get in touch with you since i don't know how to get in touch directly with participants.
I had a reply on my concern by Quinn who told me you could perhaps help.
This is all about nested popup menu.
I triad to apply the process according to this thread, but honestly I came quickly to a wall.
I took snap shots of my table to make you understand what I wish to do (certainly quite common but my skills are poor).
I wrote some comments on the pictures to help. I hope it will...
In reference to the thread, Invoice would be the "Order Form" of the thread, and 2nd picture down below would be the "Products".
The 3rd picture is a table with prices of the rooms.
There are of course tables for each type of products.
I hope it is not too confusing.
This is my invoice:
In the first column PRESTATION i want the operator to choose in a popup list what has been sold (night, lunch, diner, bar, spa, transport, …) and then in the DESCRIPTION column i want another popup list appearing with products in accordance with what the operator chose in PRESTATION.
For example the operator chooses in 1st column the NIGHT (Nuitée in french), then DESCRIPTION column same row should come up with a popup list of the rooms (A, B, C, D, E, F, G) so the operator can choose what has been purchased.
Cherry on the cake: an automated unit price of the room should also appear in the PRIX A L'UNITE TTC column (Unit Price) depending on this choice of the room, and also status of the guest (low season rental, high season, friend-family, staff, tour operator customer, ...). The status of the customer is defined in a popup list in another sheet.
And of course, I would like this process to apply to all purchased made (this is what i tried to show with this table with colored arrows):
If in column 1 you provide Night, column 2 opens on a list of rooms, if it is transport then it opens on transport providers, if bBar then it opens on list of beverages, etc ...
As I said, if the price can be displayed automatically in the desired column Unit Price ... that would be perfect.
If i want to use the process of nested popup menus proposed in the thread, with that kind of complications, it becomes quite tough.
So I had been told the things can be automatized through an Applescript process. But this I don't one thing about this language, or even Automator.
Therefore, I guess it makes it rather difficult to find a "soft solution" to my problem.
What is unclear to me is why Apple does not develop expressively this feature since it is most useful.
Anyway, thank you for your time and professionalism on this one.
Lionnel.

Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

Hello,
I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
I appreciate any help.
Regards,
Hector

Hi,
ME2N - In selection screen, enter Selection parameters as
WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
OR use RECHNUNG i.e. Open invoices and execute the report
OR Use MB5S - GR/IR Balances

Which Event Classes i should use for finding good indexs and statistics for queries in SP.

Dear all,
I am trying to use pro filer to create a trace,so that it can be used as workload in
"Database Engine Tuning Advisor" for optimization of one stored procedure.
Please tel me about the Event classes which i should use in trace.
The stored proc contains three insert queries which insert data into a table variable,
Finally a select query is used on same table variable with one union of the same table variable, to generate a sequence for records based on certain condition of few columns.
There are three cases where i am using the above structure of the SP, so there are three SPS out of three , i will chose one based on their performance.
1) There is only one table with three inserts which gets into a table variable with a final sequence creation block.
2) There are 15 tables with 45 inserts , which gets into a tabel variable with a final
sequence creation block.
3)
There are 3 tables with 9 inserts , which gets into a table variable with a final
sequence creation block.
In all the above case number of record will be around 5 lacks.
Purpose is optimization of queries in SP
like which Event Classes i should use for finding good indexs and statistics for queries in SP.
yours sincerely

"Database Engine Tuning Advisor" for optimization of one stored procedure.
Please tel me about the Event classes which i should use in trace.
You can use the "Tuning" template to capture the workload to a trace file that can be used by the DETA. See
http://technet.microsoft.com/en-us/library/ms190957(v=sql.105).aspx
If you are capturing the workload of a production server, I suggest you not do that directly from Profiler as that can impact server performance. Instead, start/stop the Profiler Tuning template against a test server and then script the trace
definition (File-->Export-->Script Trace Definition). You can then customize the script (e.g. file name) and run the script against the prod server to capture the workload to the specified file. Stop and remove the trace after the workload
is captured with sp_trace_setstatus:
DECLARE @TraceID int = <trace id returned by the trace create script>
EXEC sp_trace_setstatus @TraceID, 0; --stop trace
EXEC sp_trace_setstatus @TraceID, 2; --remove trace definition
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Where can I download SDK and examples for the Calendar API?

Where can I download SDK and examples for the Calendar API?

Hi - Please take a look at the Workspace application developers guides for Web Services and Java. http://www.oracle.com/pls/cs101/portal.portal_cs?selected=5
That will get you started.
You will have to use WSDL2Java to generate the stubs but it works fairly well.

Where can I download SDK and examples for the Workspace API?

Where can I download SDK and examples for the Workspace API?

Hi - Please take a look at the Workspace application developers guides for Web Services and Java. http://www.oracle.com/pls/cs101/portal.portal_cs?selected=5
That will get you started.
You will have to use WSDL2Java to generate the stubs but it works fairly well.

WAAS Rjct Resources and conditions for asymmetric traffic

Hello,
I have a customer network of 30 WAE's connected to an MPLS cloud. Interception method is inline for all WAE, and WCCP for NM-WAE.
Of those WAE's (running 4.1.1c), I have 3 that are connected in Datacenters, as such they are expected to receive most of the traffic and have been dimensioned as OE7341 appliances.
It is my impression that this network statistics are not as good as they should be: Some of the optimizations factor are at 1.2 or 1.3X and most are simply 1.0X.
My impression is that there is a lot of passthrough traffic, and although some of it is configured as so on the application policies, when I check statistics pass-through on several WAE's on the network I see that the Rjct Resources is very high in a particular WAE in a Datacenter - that has a 7341 Box (12Gb RAM!) - and I also do get non-zero counters on other boxes.
Is there any way to see on a given moment how many connections are going through the box so that I understand if I'm really facing a box capacity issue? The initial shows I did didn't look as there were that many connections running through the box, but if I checked them live I saw about 65 Rjct Resource connection at a given time.
Can anybody shed some light on this particular statistic?
sghmansin--17w#
sh statistics pass-through
Outbound
PT Client:
Bytes 4081578138946
Packets 11567591648
PT Server:
Bytes 8833662508567
Packets 13797553929
Active Completed
Overall 0 0
No Peer 7 141742513
Rjct Capabilities 0 0
Rjct Resources 65 273669865
App Config 6 25610854
Global Config 0 0
Asymmetric 1 1597096
In Progress 97 453847516
Intermediate 0 0
Overload 0 0
Internal Error 0 478
App Override 0 0
Server Black List 0 150553
AD Version Mismatch 0 0
sghmansin--17w#
One other observation is that pass-through through asymetric is also very frequent. Given that the customer is mostly using inline interception, even if a connection comes through a WAN/LAN interface pair and exits through another, the optimization should still be done.
The datacenter designs are dual-homed active/passive, and traffic goes through the same (and only) WAE box. The customer assures me that there is no asymetrical traffic.
Can anybody explain to me how is the decision made to mark a given flow as asymmetrical (and them pass-through it)?
Thanks
Gustavo Novais

Hi Dan, Thank you for your reply.
That show was just from one of the boxes, in this case on the Datacenter.
For instance I also see asymetricals in NM-WAE's configured for WCCP. But the number is not that substantial, which makes me believe the interception is well configured (unfortunately the routers are managed by a third party, and I am yet to have access to their config).
All boxes on this network have Enterprise License activated.
How can I check on a given moment all connections count on the box? is there any MIB oid pollable to check that?
Do passthrough connections count to the overall limit?
While doing the diagnostics on the WAAS devices there was in deed a WAAS device marked as having asymetrical traffic, but many others have PT Asym connections and have not been marked as such by the diagnostics?
How does the diagnostic work? Is it a instantaneous dianostic (i.e. checks connection table at time T to see if any of the current connections is PT Asym )?
If on the far end of a connection we do have an asymetrical network topology, does the near end also mark the same connection as PT Asym, or will it simply say No Peer?
thanks
Thanks

How to Manually Perform software Updates and tips for making Macbook better

Hi. So recently my internet was really slow. I figured the problem out and now is working well. Although the youtube site does not allow me to view entire videos.
Well...i was told that since my macbook is turned off at night, it cant perform software updates between 3am-6am...so how can i do these manually? or how can i change the update time to sometime in the evening?
I heard these software updates are suppose to make the macbook run and perform better. what other things can i do to accomplish that?
(Laymans terms, im new to the mac world)

Select Software Update from the Apple menu. Or download the standalone updaters from Apple's download site - http://www.apple.com/support/downloads/. Or simply set the Check for Updates option in Software Update to whatever frequency you prefer. SU will notify you when updates are available.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Games: Good Sokoban and Hearts for Snow Leopard

Hi, all,
My mother-in-law is new to Mac, previously Windows, and was asking about a good Hearts and Sokoban game for OS X. Any recommendations?
We've nailed down Solitaire, so just curious about the other two. She's an avid Hearts player who enjoys statistics & scoring.
Any advice for both would be great.
Thanks.

Hi
Will these do for Hearts?
http://www.versiontracker.com/dyn/moreinfo/macosx/10974342
http://www.versiontracker.com/dyn/moreinfo/macosx/28761
Can't seem to find anything for Sokoban?
Tony

Good apps and games for the disabled?

My brother in law was born premature and as a result has a number of neurological and muscular problems. He has been wheelchair bound since he was very young, and mentally he will likely not develop past about a third grade intellect. He is currently 30, and his parents have gone to great lengths to take care of him as best they can. I've known him for about four years now, and he's got the personality of a guy that you can't help but like
My in laws live on the other side of the US as my wife and I do, but we're going to be flying out to visit them in a few weeks. I'm always seeing young kids at airports and the supermarket playing games on their parents' smartphones and tablets, and that got me to thinking that an iPad might make a great belated 30th birthday present for my brother in law. It's got an easy to understand interface, a touchscreen that's large enough for him to effectively interact with, and it could provide him with much more intellectual stimulation than watching The Price Is Right.
Before giving it to him, I'd really like to load it up with games that he will be able to play. I've never owned an iPhone or an iPad, though, so the only ones I'm familiar with are the super popular (Angry Birds and Cut the Rope) and what few games I've played around with on my Android powered phone.
Can anyone make some suggestions for me about apps that I could get for him? The more kid friendly, the better. He does have limitations to motor control in his hands, so I think it'd be best if the app didn't require a high level of precision (for example, Slice It! probably wouldn't be too fun). I don't mind if it's not free- if I'm already spending a few hundred dollars on the hardware, $5 for software isn't a big deal
Thanks in advance!

Forgot to add this. You'll have to decide whether to get an iPad (new version, 3) or an iPad 2. Although a bit more costly, I would recommend the new iPad. It comes with a dictation app and when iOS 6 http://www.apple.com/ios/ios6/ is released in the fall, it will have Siri. With Siri, he can speak sites to go to in Safari, the browser. There is a free dictation app, Dragon Dictation, for the iPad 2. The 16GB model with wifi (no 3/4G) should meet his needs, unless he wants movies installed (then get the 32GB model).
What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
What are all the differences between the iPad 3rd Gen models? Which should I buy?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
Should I Buy a New iPad? Or an iPad 2?
http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
iPad 3 vs iPad 2 vs iPad 1- Feature comparisons with iOS 5
http://ipadhelp.com/ipad-help/ipad-3-vs-ipad-2/
iPad Q&A
http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
A Few Questions (and Answers) About the New iPad
http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the- new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
New iPad: A Polishing of the Old
http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
iPad 1, 2 and New Specifications
http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
If you think you may get an iPad 2:
Refurbished iPad Prices
http://store.apple.com/us/browse/home/specialdeals/ipad
New 16GB iPad 2 Prices
http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
 Cheers, Tom

Goods issue and backflush for the same component

Hello All,
We want to do goods issue for some components and if the complete amount of Material is not issued, we want the remaining quantity to be backflushed. Is this possible in SAP, if it is possible can any one tell me how. Thanks in Advance.

Dear Mohan,
In my understanding it is not possible,say in case if you have set the backflush indicator either in the material master or else in
the production order,you cannot perform manual good's issue against that reservation number through MB1A for 261
movement.
But you will be able to issue the materials against the order using MB1A.Based on the order quantity at the time of confirmation
either using CO11N/CO15 ,the system performs backflush for the component's quantity.
I would suggest either backflush the component or else do the good's issue manually.
Check and revert back.
Regards
Mangalraj.S

Resources and Skills for RFID implementation

Hi
Assuming that the project on hand is to RFID-enable the warehouse of a manufacturer with small operations (annual revenues around $50-100 million). Time frame: 3 months.
And the organization is already using SAP. So processes to be covered are material movement in warehouse and shipping/delivery processing only.
I would like to know:
1. How many persons would be required to implement RFID and what skills these persons must possess. I think we would need one MM, one SD consultant each (for warehouse and shipping processes). And one person with SAP AII?
2. Apart from the above, would we need individual persons for ABAP, XI, XML, Java?
3. What should be the background knowledge for a SAP AII person? Do we train a ABAP person to become a SAP AII expert? Is it that SAP AII person in a project must know ABAP and/or Java?
Thank you for your time!!
Regards
Sankar

Hi
1. How many persons
One MM -> OK
One SD -> OK
And you need one Person who make the thinks runing on the AII-System
2. Other individual persons
In some scenarios it's good to have a person in the project who knows XI well.
You will need this person only a few days.
You do not need a person with Java Know-How since AII ist in ABAP-OO and in XI the Java-Part for your scenario will be very little
3. Background for a SAP AII person
Look for someone with good ABAP-Skills. It wood be good if this person knows something about ABAP-OO (since the so called activtys in AII are ABAP-OO classes and methods). It would be good if this person has an idea about XML (no deep, but at least some basics).
The SAP AII person don't need Java at all.
4. Other Project members
Someone has to install a device controller. This is that peace of software witch translates the events from a RFID-Reader in a XML-Message for the AII.
Usually this is done by a partner.
I hope this helps.
Kind regards
Herbert

IPhone: Where to find good Documentation and Samples for Auto-Rotate?

So I'm starting to get into the auto rotation features for my iPhone apps. I've spent a couple hours looking for some apple documentation and searching online, but I'm not finding any "definitive" guide to discuss the process. Any recommendations would be great!
Specifically, I'm trying to learn about the following:
- I have already implemented auto-rotation, but how do I setup my view so when rotated, it adjust the UI to take advantage of landscape mode. (i.e. I want to add extra features, and re-position some things)
- I also would like to the option within a couple views, that when rotated, goes to an entirely new view.
Thanks in advance!

I generally find that vector drawing programs are better for drawing toolbar icons and the like, as vector drawings are easier to tweak and adjust later. I've had great success with VectorDesigner in my own apps; it has a shallow learning curve and a solid basic feature set, although it can be quirky at times. (It also doesn't play all that well with certain development tools: don't try to add VectorDesigner files to Xcode projects, and make sure you zip them before you add them to a Subversion or CVS repository. VectorDesigner files are packages--like application bundles--and those tools don't play well with packages.)
If you want to go a little higher end, Illustrator is the Photoshop of vector drawing, but like Photoshop you'll probably find it very difficult to start out with.
You'll also need a raster graphics editor to tweak exported images. I use Pixelmator for this, but Photoshop will work just as well.

Coocox provide components and example for IC

I found a very good website: www.coocox.org.
They provide components for temperatrue sensor and Flash devices which connect to this MCU with SPI/I2C or other communication port.
I recommand the site here in case that you may need the sources.

Hi,
Check these blogs for simple file to file scenario:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
priyanka

Good resources and examples for making beautiful things

Similar Messages

Maybe you are looking for