Good saxophone, mouth organ, brass and banjo sounds

Does anyone know where i can get good saxophone, mouth organ, brass and banjo sounds?
Mainstage has them (except mouth organ), but I've heard better sounds on Roland machines.
Any help would be appreciated.
Thanks.

Hi,
Good you got it sorted. Tip: you could post this sort of question on the Logic Pro 8 forum too; the answer would be relevant to LP8 users too, and you'll certainly get more responses. Even if the question is specifically about Mainstage, you can try over there too.
regards, Erik.

Similar Messages

Where can I find good organ and keyboard sounds for Logic Express?

Where can I find good organ and keyboard sounds for Logic Express? The included sounds seem to be lacking or hard to access.

Update: Not terribly impressed with the interface for NI's Vintage Organs from the demo download, although the sound demos sure sound good. The letters are tiny and hard to read and the whole thing feels very PC-centric. I guess a guy gets spoiled by the intuitive stuff. I think what I'll try for now is just hooking up my keyboard (Korg N1, circa 1998, about 1700 built in sounds) as a sound module and record the waveforms when I find a sound I like. I did find the EXS24 and several other software synths with some cool organ sounds after digging a little deeper. It would be good if Apple came out with another jam pack just for organs and keys, as the existing jam packs are so easy to use.

I am trying to create a video of my desktop using Quicktime (10.0). I have no sound. I have checked my system preferences and everything looks good there. Why am I lacking sound on my video?

I am trying to create a video of my desktop using Quicktime (10.0). I have no sound. I have checked my system preferences and everything looks good there. Why am I lacking sound on my video?

You might also post this question in the Quicktime forum https://discussions.apple.com/community/mac_os/quicktime

Hello, my iPhone 4s is worked properly but videos and audios sound is not worked, earphone sound is good, pls help.

hello sir,
my iphone 4s is good cundition and properly worked, but vedeios and audios sound is bug. earphone sound is good,
running condition in videos and audios ringer volium butten is not worked.
pls help me.
Aazam Shahab
Mumbai, India
[email protected]

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Hi, The burn quality of iDVD in very low for my slide shows. Images do no tlook good on playback and the sound track jumps every 99 images due to the way chapters are set up in it. How to I output a slide show to be high quiality?

Hi
the output form iDVD is very poor quality( Low res due to compression by iDVD) when I produce a slide show in iPhoto and share it over to iDVD then burn it. What is the solution? I like to add the title page in idvd ads it looks professional, but hte end output in NOT professional.
Also in iDVD the soundtrack that was flawless in iphoto now jstutters every 99 images and IDVD apparantly can only process bulk images in chapters that contain 99 images. So if you have a slide show with 245 images in you get hesitation at two points of teh slideshow as it struggles to start the next set of 99 images in the slide show!!! How annoying overall. Please help??????

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089

Buzzing and Echo Sound After Recording

Hello,
I am hearing a buzzing and echo sound in the background after I record a project on Captivate 4. I am using a USB DYNEX Microphone that is connected to the Laptop. Adjusted the Volumne in Captivate but does not elemintate the background noise. Any suggestions???
Thanks

Have you looked for environmental noises, both electrical and audible?
Here are some possible culprits for induced electrical "buzz" or "hum." These "noises" are actually created by electrical interference in the recording equipment, and don't become apparent until playback:
Fluorescent strip lighting.
AC power cords near the microphone cable.
Mic cable near CRT displays.
Other electronic devices where you are recording.
If you're using a laptop, I find I have better luck running on battery power when recording, though I'm not clear if this is because of the power source, or because power-save features kick in that make the machine quieter.
Another possibility is real audio noise that you mentally tune out when you're in the room, but hear when you listen to playback. Some ones I've run into:
Ventilation noise. Particularly if you're recording in a building where you work all the time, you don't hear the ventilation system unless you really stop to listen for it.
Small electronic devices -- fans, projectors, etc. that might be in the room.
Also, play around with microphone position relative to your mouth; it's possible that the source of the racket is your own breath!!
Good luck!!

Brain pick on an old problem of mine (squealing and poping sound when system is under heavy loa

Firstly, my apologies if this post gets double posted as I am on a barely functional dsl connection? It get?s flaky when it rains which is only periodically for about 2 months of the year?
I was wondering if someone in the know might be able to clue me in as to any fixes for this VERY old issue of mine.
I have already searched a bit and all I found was the squeal and crash issue, mine is similar but not identical.
History:
I have been a creative card user since the first SoundBlaster came out (and jammed it into a 286 system). Well I think it was the first since I was new to computers then?
Anyway I have had an SB, SB6, SB6AWE, SB Li've, and now SB li've Audigy 2 ZS. Pretty sure I had an audigy pro card (a family member was upgrading so I grabbed theirs for cheap).
Since around the audigy series of cards I have been working on friends and family member?s (and their friends/family) on the side. Though these days I am not a happy camper.
Problem:
I am having this problem that I have now learned to li've with where when I am playing sounds (game or music) and the system gets under some type of heavy load I get LOUD squealing and popping sounds (mostly the squealing kind). The sound can be in excess of my volume settings and I tend to wear headphones (I can't believe I wasn?t deafened the first few times and occasionally recently when I forget, actually I have been having trouble understanding people lately, need to get my ears checked I guess).
Heavy load defined:-On occasion copying files from one dri've to another (usually large files in this case).
-Always when copying files over a network to or from my system.
-in few cases of a network heavy or hard dri've heavy application (lan games anyone?) ? Mostly when I am hosting.
NOTE: for the most part the card works fine in games as I usually don?t do something else while playing a game, usually.
For how long?:
This is hard for me to place. I remember wanting to upgrade to 2k when it came out but I heard from friends that had tried to upgrade that the drivers for the sb6 awe or any other creative card were garbage so I delayed upgrading to win2k till I got my first + ghz system and didn?t have much choice. I have been dealing with this since (also at the time I had an audigy or perhaps just a li've, hard to place).
Steps to solve this (not resolved yet):
I have tried several different configurations, this problem has been present on both an amd and 2 (or more) different intel chi
ps.
The problem has not been present on non-creative products under 2k (yes I had a card made by the company that creative bought out a while back), driver updates have done nothing or made it worse (though recent drivers seem to be a little better).
A while back (on the amd machine) I tried dealing with creative via e-mail and got canned responses of things I had already tried (and had noted in my request for help that I had already tried them) even as far as completely clean installs and as I mentioned different systems.
I am now using completely different hardware besides the sound card. Swapping out for other soundcards doesn?t help if they are creative cards (I even went as far as trading someone else identical cards to no avail).
I have even tried windows xp to see if that would help, nope.
The only solution to this so far has been not to use the card and for a while now I have been suggesting to friends and family to just use the internal on mobo sound instead of an add on creative card.
I have even had someone else build me a system (as apposed to my building it) just in case I was doing something weird, no help.
That and just not listening to anything when I am about to put my computer under a heavy load (and making sure to disconnect the phones just in case since sometimes it happens without sound playing, RARELY).
Current system specs:intel p4 2.66 ghz
Audigy 2 zs (platinum if memory serves, pretty sure here)
Geforce 6800gt
gig of ram
(I would have to hunt around for other details like mobo)
I have to say all this effort to get one companies hardware to work just sucks and what sucks more is I have no choice on the market, there is only one noteworthy sound card company when it comes to gaming, on the plus side there isn?t much for me to look forward to in gaming these days? I don?t like MMOs (if I can't play in on a lan and just the people on the lan I don?t care for the game much). Halflife (the reason I bought the geforce 6800 gt card) renders the world in such a way as to make me motion sick (just like all the quake games) so that was a waste of money?
The reason that there isn?t much to look forward to in gaming is because I can just disable my creative card and enable my onboard mobo sound and actually hear sound while doing stuff as apposed to garbled deafening screeching sounds that I do now when I forget to stop sound before doing something hard on the system?
Personally this is a last cry for help before I completely give up, I am already a very disenchanted customer hoping there might be some way that I can just listen to music or play games without much worry about sound (the squeals can be heard from across the room from the headsets set at a normal volume so you can imagine what that?s like when they are on my head). I have already, for the last couple of years, been steering people away from creative products in general touting their core product a failure and the people that didn?t believe I just let them sit and listen to some music and then copy a file?
Sound and music are almost more important to me than graphics btw, I have returned games for poor (in my opinion) quality sound tracks (mostly EA products) and have bought games that had good sound/music but poor graphics, heck I still play some old dos games (loom anyone).
Sorry the end there got a little ranty, so anyone have suggestions to the problem section?
One last thing: This took me a while to find and is a bonus to anyone that read all that? For some relati'vely cheap 5. headphones (all I had looked at were over $00) check out the zalman headphones. I have had mine for well over a year now and they still sound just as good as when I got them (even after the ear shattering squeals) and only cost me $50) They are sturdy too (more than I expected), I tend to break headphones within 5 months even some nice $50 stereo ones and these things are still intact. By break I mean break a wire, blow a speaker (squeals) (not literally exploded), snap the headpiece? I can't seem to see a direct link to the speakers so google zalman and headphones?

I don't know if anyone is following this or cares much but I thought I would add some info for those that like me before signing up, simply searched and found some useful tidbits. I also didn't see an option to edit my previous post as most boards I post on have that option to give you an alternati've to double posting...
My system was gigabit however I only had cat5 cable with a megabit switch. Now the switch is gigabit with a cat5e cable and a short distance from me to the hub (same system otherwise). The gigabit is onboard.
I figured I would see a bit speed boost with the new network and indeed in games I did see an improvement on large data transmitting games (American Conquest 4x4 maps in multiplayer LAN) however I expected file transfers between me and other gigabit on mobo cat5e systems would be significantly better. Instead I saw speeds only slightly better than before, around to 2 megabytes per second (using a measurement tool Netstat li've from AnalogueX) and that annoying screeching. At those speeds that might explain why the game was still on the jerky side (a full blown 4x4 map the way we play stresses all computer components but network seemed to be the bottleneck).
My solution to getting fast file transfers? Disabling my sound card by going to device manager right clicking on the Creative SB Audigy 2 ZS item and choosing disable. With an acti've file transfer (large single file rather than small files) I saw about -2 megabytes per second. Within moments of disabling the soundcard I suddenly had about 20 megabytes per second and the estimated time went from 0 minutes to almost finished...
I have to say on an aside that this just adds to my disappointment with this card (and the fact that I have seen similar poor performance in other peoples cards set up by me or not). This continues to cast a light of doubt for me and future creative products. I have to say though that the X-Fi (after fully updating drivers) seems like it *MIGHT* be worth a try? I certainly won?t drop any money into a new creative card (or recommend creative computer equipment) until I see some good proof that problems such as those that plagued this and other creative cards are gone.
Now remembering several posts I read here (and why I am even posting this), I tried disabling some of the features of my nice Creative card (through the various consoles for example the EAX console). Indeed I did see a performance boost (more on that later) as well as death to the squeals (though oddly I did hear that odd electrical interference noise that is supposed to be why onboard audio sucks) and my ears thanked me for that. As for performance my transfer rates went from -2 megabytes per second to a whopping 4-8 megabytes per second (mostly 5). I am definitely leaving those special features disabled for bandwidth intensi've games, after all they are mostly meant for movie and music enhancement (though they make some games sound nice too). I should note that the squeals, though not deafening, are present with other separations in playback, during file transfers. This isn?t much of an issue for me since win2k (and XP) lets me disable and enable my sound card at will without reboots (most of the time) and it has become habit to work around my sound card in this way already.
I know that there is a limited bandwidth on the system bus between all devices however I just have to wonder why my SB Audigy card is using up so much bandwidth when not doing jack... That and I thought that limit was much higher than 20 or so megabytes per second which has me wonder just how much this sound card is wasting (and possibly stressing) in my system when not doing anything. My guess though is the sound card is merely interfering with PCI traffic and not acti'vely using it (though I am not aware of tools to check this). This might explain why I have gotten less than stellar performance out of other hardware though I have yet to try pushing my system with the sound card off yet?
While I still can't recommend creative sound cards to customers at least I can't say that Creative doesn't make anything worth buying anymore (and I used to be a huge creative advocate). The new Zen mini player got pretty good praise (search maximum PC for the review).
Assuming this thread stays open I will add more of my hopefully useful experience with this sound card. If on the other hand it'ss closed up (since there were a few unkind comments) I should have to assume that Creative has completely turned it'ss back on me as well as my current and future customers (unless some other reason for closing is given of course). As it is now I see signs of improvement in the companies? products (which pleases me to no end) though not yet enough to justify my spending or recommendations, besides the portable device, though I have no interest in devices that don?t allow for flash memory expansion I have been asked about them on occasion.

Sound Blaster Live 24-bit PCI Sound Card and Creative Sound Blaster PCI Card not detect

Ok here is my problem. I bought a Creative Sound Blaster PCI sound card a while back and it was working fine but recently when I would boot up my computer and try to play music say off of Winamp it says Bad DirectSound Driver. When I check device manager it shows no sound card there and in sounds and audio devices it says no audio device. Now my brother believed this to be a card fault so we went to Frys and bought a Sound Blaster Li've 24-bit PCI card. I uninstalled the old drivers and installed this new one but yet it's the same problem. My assumption was that Windows XP had something conflicting so I reinstalled the OS. It found the card and I installed the latest drivers?off of this site but now it does the same thing yet again with a fresh install of Windows XP. The card has been in all 3 of my PCI slots and it will detect it for a moment but then acts like as if the card was never installed. Like I never installed a sound card into the computer. The onboard audio has been disabled for a while now but I do not know what the problem could be. I did Scan for hardware changes but it doesn't show up. Sometimes when the card is detected if I do scan for hardware changes and the card is there it will just magically disappear from the device manager as if it was never there. Even when I try to load music and I see the card is detected it will not play the music and ends up locking up Winamp to the point that sometimes will go BSOD. Now I would really like to find out what the issue is because I am planning this weekend to swap out my motherboard with a duplicate board to see if that will end up fixing the problem but I want to find out if there is any other way to fix this issue. Thank you.Message Edited by AuXoIs on 02-25-200808:28 PM

Hmm what other options is there for the bios on PCI slots?Also anything you connect to the motherboard can have oxidization (I think its that) build up on the connection. Check the connector on the card and get a eraser (Pen eraser is better) and give it a good cleaning. The connector might have alot of build-up on it and you can see it by a dark yellowy colour. I cleaned my graphics card and ram connectors after they got alot of the build-up on them. On a older computer my graphics stopped working and this fixed it. Also I went away for a while (like a month) and came back to see that my puter didn't display anything. Opened it up and saw that the graphic card had alot of corrosion? on the card connector and in the slot. Does that if you computer is turned of for a long time. Had a heck of time trying to clean the slot out. One other thing that it could be is the sound card is faulty. I had an audigy 2 and it died a while back . It picks it up and then try and use it computer freezes and the after restart it's not there anymore. Hope it's not that problem. Hope this gives you something to go by.

What about the Brass and Woodwind instruments?

There should be brass and woodwind instruments.
Such as a saxophone, a clarinet, a flute, and a trumpet.

nvb9 wrote:
Am I the owner of the data what I've put in the cloud?
Yes.
We are a working with trusted data, is iCloud not recommend?
As with MobileMe, iCloud storage is as secure as your password. If someone knows your password they can access your data, so it's important to use a strong password.

I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green. The sound continues.

I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

Sorry, everyone. I think I may have figured out what it was all down to...........
I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged. I did this so as not to endanger my years of work on the third drive, until Windows had setup. I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
This was not a problem on my old system, but it seems this system doesn't like it.
I must have left the drive completely unplugged, the times Windows did setup. Amazing really. I couldn't see the woods for the trees.
Anyway, I'm sorry to have bothered everyone with my problem.
Cheers
Marcus
edit : Sorry Syar2003, I didn't see your reply until I had posted mine. Many thanks for taking the time to try and help me, it seems as though I may have sorted it now. I am using IDE drives until I can afford SATA. But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid. I didn't know they would be updated at the same time.
Again, cheers
Marcus

Low and unclear sound from headphone HP Pavilion G6 2228tu

laptop hp pavillion g6 2228TU OS windows 8 pro 64 bit
every thing was working fine.. but from last 2-3 days i faced a problem of low and cracking sound from headphone ..
laptop speraker are working fine .. but when I connect headphone to audio port .. sounds comes out to be very low and unclear.
I tried headphone with my desktop and mobile but it was working fine.
I called HP custmor support.. they gave a link of sound driver.. i updated sound driver but no solution comes out..

Hello Deepak-Kumar,
You’re having a problem with the sound not be very loud.
Go to device manager and uninstall the IDT audio.
Do not restart the computer.
Now install the updated sound driver.
Since it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes.
Have a good day.

Got iPhone 5. Really Disappointed! After 2 days, alert and typing sounds are not working. Camera is terrible!

Bought iPhone 5. Really disappointed. Within 2 days, alert sounds and typing sounds are not working. Camera is terrible. My old HTC One S was far superior!

First, no, it is not showing orange. I checked the silent button immediately. Then I checked the sounds section of my settings, but all is good there. When I get a phone call, it rings fine. Alert and typing sounds are not working.
Second..., yes this was a technical point (in which I was hoping someone else might have had the same problem, with a solution), as well as a complaint (definitely one worth making as it is not a minor issue - it is important to hear text alerts when you have children).

Stop and Start sounds

Good morning All,
I have a Flash presentation that has some music and various sounds throughout the presentation.
I want to have a btn stop all the sounds, but if clicked again it will enable all the sounds again.
Is this possible? I can get the btn to stop the sounds, but cannot get the music to enable after.
Any help is greatly appreciated,
Cheers-
Graeme

if you're using stopAllSounds(), all sounds are enabled after that executes. they won't restart but they're enabled.
if you want to re-start all stopped sounds, you'll need to explicitly do that for each sound instance.

How to put together a two camera shoot and sync sound

I have some live footage of musical performance. I have footage from two cameras and the sound off the desk that I need to sync up. Can somebody suggest the best way to do this? I had hoped I could sync the sound to both cameras, then put in which shots I chose at any given point, but I don't know if the system will do that. Any suggestions?

You want to do a multicam.
It is extremely well suited for this.
Since you don't seem to be aware of this, I recommend that you follow some good tutorials on this.
To get you started, take a look at a few videos explaining how this works; then you may want to read a bit on the manual of the software.
You may want to start with episode of 153, which explains how to put together a multicam clip: https://www.youtube.com/watch?v=qKhmZbVgywk
Then follow the next episode, about cutting.

Quicktime 7.04, Windows Terminal servers, and no sound

Hi all,
I suspect this is related to all those posts I've already read here about sound problems with QT 7.04...
I look after a number of Windows 2003 terminal servers in schools. They used to have QuickTime 6.52 and played sound just fine. However, when I upgraded them to 7.04, the video played but no sound. Testing is easy; I just open up the SAMPLE.MOV in the QuickTime folder! On a terminal server with 6.52, it plays video AND audio just fine. But when I upgrade that same box to 7.04, the sound is then gone!
I suppose the quick solution is to revert back to 6.52. Our concern of course was all the talk about 6.52 having various security vulnerabilities--the fix was to upgrade to 7.04.
So now I have a secure version of QuickTime, but it doesn't play audio anymore. Not much of a solution!!!
Thoughts? Am I stuck waiting for a 7.05 fix? On the terminal servers, the safe mode (wave out only) was already the default option for QT 7.04, and I've tried making various adjustments to no avail.
Thanks for any help,
Sir Timbit

Sir Timbit,
We are experiencing the exact same issue at our school. Most of our classrooms are thin client PCs connecting to a Win2003 terminal server. When we decided to go thin client, we tested all multimedia applications that we could think of. With the upgrade to QT 7, we now have stuttering audio. I certainly hope that Apple is woking on a fix for this as it is negatively impacting our instructors as well as creating a perception that Quicktime is not a good multi-media application.
So, while I don't have a solution... I hope that someone at Apple will address our needs.
John

Good saxophone, mouth organ, brass and banjo sounds

Similar Messages

Maybe you are looking for