Good Source for SATA HDD enclosures?

I am looking for a good source for hard drive enclosures for my MB Pro hard drive. I have upgraded mine, and I want to have access to my old one?

I've never bought one myself, but I have heard Other World Computing recommended. You probably would want to look at a firewire SATA with the Oxford 11+ chipset (I'm not sure of the chipset number--it could be higher). With the firewire enclosure, I think you can also make a bootable clone for your Mac. Hopefully you will get recommendations of what to buy as well as where to buy. But OWC is a good place to start.
Good luck!

Similar Messages

SATA HDD Enclosure

I have just purchased a SATA HDD enclosure for my 1TB WD drive (it was an external drive but i ripped the USB connections off the pads) so that I can use it. However, after purchasing it I noted on the description that all the system requrements were all Windows and it doesnt mention Mac. I am waiting for it to be delivered but just wondered if there was actually any drivers for them or if they were plug and play?
Any advice would be great. Thanks

External HDD enclosures are generic. It should be compatible with your MBP. Install the WD HDD (assuming it is Mac formatted) in the enclosure and it should be recognized by the MBP.
Ciao.

Good source for quality album art

A good source for getting good quality album art, which has a higher resolution than Amazon, try http://www.coveralia.com/ which eventhough it is in Spanish, simply type the artist in "BUSCADOR:" at the top, and it is obvious from there. I've been using it for five minutes, and looks impressive. My iPod has not arrived yet, so cannot test that part, but I assume it will work as it goes into iTunes ok....

This is the same as copy & pasting from Amazon, which has lower quality. As long as you own the CD, I think you are OK. Anybody else able to comment.

Good source for desktop wallpaper?

Is there a good source for Mac OS desktop wallpaper?
This leopard wallpaper is getting old, fast. Mac Os does not include any cool alternatives.
I may have to steal some from Vista! AHHHHHH!
Thanks for any help!

http://interfacelift.com

Good source for learning - SQL Stored Proceedures using Dreamweaver

I am looking for a good source for learning how to integrate
Stored
Proceedures using Dreamweaver?
Is there a book or something online?
Thanks

Hey Lee,
You find yourself in that position, I find myself in that
position, every
damn developer/programer in the world find themselves in that
position. It
may be on different levels, but everyones in the same boat.
Here is my suggestion. Take the existing knowledge you have,
pick a
technology that is a bit more futureproof (if the one you
have is getting
outdated) and one that isn't too far removed from the one you
know and put
it all into that one area.
Databases are really important if you want to be a decent web
developer. If
you're serious and want to be good then devote time to a
particular database
and get to know it well. I would suggest SQL Server. You
don't have to be
DBA standard but get as much knowledge on it as you can.
Never underestimate
your required knowledge of databases.
Set yourself goals. Say to yourself "In 6 months I want to be
a proficient
developer in this language" and go for it. Don't get
side-tracked into
something else just keep focused on one area and get good at
it. Yes, that
language will become outdated in time but you will be all the
more ready to
take on the next because of your past experiences.
I try to look at it like this; It is better to a master of
one technology
and know enough to get by in others than a Jack of all
technologies but a
master of none.
Pat.
"lee" <[email protected]> wrote in message
news:[email protected]...
> Thanks Pat...I only looked at it briefly but it looks
like what I needed.
>
> The biggest problem that I have is that I don't have
enough time to look
> into some of this stuff...
>
> Over the years, I've gotten to a certain level of
proficiency in certain
> things, I can do quite a bit but there always seems to
be yet another
> technology to master as the Old Ways go away.
>
> To be honest, I really just want to be an artist with
some programming
> skills but the nature of this position demands that I
"learn It all."
>
> Meanwhile, all those other skills have to be put
asside...I really should
> master flash...I really should work on my illustration
skills...I really
> should master CSS. I really should master...I don't
know, name it. And if
> I really wanted to abandon my ...LIFE...I could,
perhaps, figure it all
> out.
>
> What is so tiring is that my skill set is stretched SO
f-ing thin that I
> can never, possibly catch up. The only cure is time but
often even that
> goes against me.
>
> Anyways, thanks for the link. I'll probably be back
later with questions.
>
> Thanks Pat.
>
> If anyone else finds a good source, let me know.
>
>

Good source for tables and reports

Hello!
Does any one know a good source for tables and reports in SRM (EBP) I really
looking to report on the Org Structure.
But any information you can give me would be really helpful.
Regards
sas

Hi,
See these threads :
SRM Tables
SRM Tables
Re: Availability of Standard Reports in SRM
SRM standard reports?
SRM Reports
For developing custom reports,you can use the stanadard tables and Function modules.
BR,
Disha.

Finding A Good Source for Free GUI Menu Code

Instead of writing everything from scratch, I am looking to find basic code already written that would be a good foundation for my own GUI. Anyone know where to get this? THANX

Maybe didn't make myself clear enough. Not by a long shot, and I'll be happy point out why.
A guy would think that since most applications have GUIs that there have
been many templates already written.Have you tried searching for any? Didja find a whole wealth of 'em?
I don't want just a simple menu. I want a comprehensive layout with
popups and all kinds of bells and whistles.I quote, from your very first post (emphasis mine): "I am looking to find basic code". Your second post indicated you were looking for a "sample layout". Hopefully you're able to see why you needed to clarify.
I would never hire anyone because I have
always coded my solutions entirely by myself. I do
like to borrow code to get a jumpstart. Someone already pointed out the contradiction here, so I won't dwell on it other than to say that if you can write basic Java code, you can add some of these "bells and whistles" yourself to some "basic code". If that's above your head, then super-special-fancy source code isn't going to help you - you won't know what to do with it.
That is what I was looking for. Putting a menuitem in a menu is
pretty simple.Yes it is. And if you can do that, you can add some "bells and whistles" (I still haven't guessed what those are - maybe if you ask for a specific example, we can provide one). If you're looking for standardized code that helps you make your menu extra-fancy, it's called the API. Find a "real-live" menu that does what you want and try to recreate it. Go give it a shot, and come back when you have questions.
Maybe I'll try asking in one of the non beginner forums. I don't think that's a real good idea for you, but hey, give it a whirl since you're apparently too lazy to Google for an answer yourself.

Good source for looking at video equipment

What is a good online source for video equipment such as decks, video capture devices, and true Video Monitors for use with FCE
Thanks
Bill

The only homest place I can recommend and everyone I know shops there is
http://www.bhphotovideo.com/
Allen

Is there a good source for iMac parts online?

Does anybody know of a good, reliable, reputable source for parts for an older i Mac?
Mine was built/bought new in 2008. The power supply is dead and the closest
Apple store to me is 120 miles away in Baton Rouge.
Thanks in advance.
charly

Thank you. Actually it WAS that far when I went to them in 2009. I am in Alexandria, Louisiana and the closest Apple store then was in Baton Rouge, 120 miles one way. I did find one now that is a bit closer, 95 miles in Lafayette. Still a good drive. This apparently is NOT a "big" state for Apple and it shows.
Oh well. Back in 1998 there were venders who did carry parts for Mac's and even built power macs. Things change and Jobs and company got greedier.
Oh, right about (not so) Best Buy. The store here only does software installs on the Mac's they sell.
Thank you for your reply.

Suggest good source for learning jsp

Hi,
Can any one suggest good link for learning jsp.....
Its very urgent............
Thanks in advance..........

This one is a good one for beginners, Have a glance.
http://www.tomlauren.com/notes/jsp.html
Ramki

Pls help to find a good source for technical OWB overview

Hello Guys,
I am starting a new job soon where OWB is a major commercial tool to build DW/DMarts with the Siebel Analytics, SharePoint, Oracle Discover and other Front-end reporting systems. I have never been used this tool before. I do have 10 years of hands-on DW experience with terabytes DB using PL/SQL/C/Informatica/Unix scripting based on the star/snowflake schemas and Multidimensional DB in Oracle RDBMS/Essbase. Could you pls recommend me some sources(books, manuals, forum and etc) where I can get a technical overview/architecture of OWB. I think the covered topics would be:
plug-in, visual interface vs scripting, APIs, all available ETL solutions, restart ability, error handling, data models can support, performance issues, cross vendor product evaluation and etc. What would be the best source to start it for person who has a solid understanding of DW but do not have hands-on experience with OWB?. Thanks in advance Dina

Hi Dina,
...the best Source for Infromation is still here ;-)
I´m working since 3 Years with the OWB, in different Versions and i think
here´re a lot of Proffessionals in these Forum.
So, if you´ve an explizit Question, post and post and post :-)
Documetations you can also found here :
http://www.oracle.com/technology/documentation/warehouse.html
and here:
http://www.tu-ilmenau.de/fakia/DWT-UEbungen.5382.0.html (german)
and a blog:
http://blogs.oracle.com/warehousebuilder/
Regards and lots of Luck in the new Job
Lone

Pm8m-v missing floppy for sata hdd. Driver frm MSI gives missing files in XP

Hi, have a new pm8m-v bord. Try to install XP sp-2. Doesnt work. After reading seems to be that i have to install a file (for sata disks) from a floppy. Floppy is not in the package! grrr. Found floppy files at the msi website. Use F6 with XP install. It works. I choose XP drivers. Then XP continue to install but at the end it needs to have 3 files more. vaimraid.sys vaimraid,inf and vaimraid.cat. All those files are on the floppy. XP is searching at the floppy becuase i see the lamp blinking. I try to put in all directorys from the floppy to put this files (i368) etc etc but after 3 hours trying it still cant find those files. What TF is wrong with this stupid small problem. Can someobne please mail me his files/maps to me? TNX Marcus

Hi and tnx 4 the reply's.
The fdd is working ok. Actually i see that XP install vaimraid.sys and after this installing he continues to install the XP things. After a few minits he is ready and then he wants to install those 3 files but it isnt possible. Maybe XP cant find it or there is something else wrong. This is not to regonice. But i use a special XP version (rol-out) (automatic) version. So no questions and no serial:"-). So it could be that this gives the problems.
Now i am going to try a normal version.
Keep you informed.
Marcus

Need replacement source for sata connector on motherboard

Computer is DV4-1123us or HP FR926UA. HP will only replace the motherboard as a whole. I just need the connector.

Hi there
I hav 1 web site for the Hp part store
check this out
http://h20141.www2.hp.com/Hpparts/default.aspx?mscssid=7EF2B326B37E4420896FF6E43F4F1D4C
Good LucK
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Good source for z61m ati fan?

This laptop is becoming a money pit....
most sources on this fan are between 90-110 dollars anyone have a differant route?

It should be bit cheaper from IBM parts, i am not sure whether there is a set price for a fan, but people have been buying fans from IBM for quite cheap nowadays for around 50 USD, which seems to be cheaper than many places. if you have a part number, you can call the maintenance parts department at 800-388-7080 options 2, then 1, then 1 again.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Anybody have a good source for T61 motherboards

Hi,
I have used this board as a source of reference in the past, just never posted.
So I joined up.
I have a bit of a problem with my 2 t61's
The first one is an Intel 14.1 Standard laptop.
The board is fried due to my mistake.
I need to get a board for this one asap as its my college laptop and I need to be back up and running in about 3 to 4 weeks.
On the other one I also have an Nvidia equipped thinkpad that died about a year ago and I have never got to fixing it as I had the other one.
Now I have neither...
So I assume the best thing is to put an Intel board into this on too?
I have all the model number and board part number, but advise on where to buy one and what is compatible would be appreciated.
I dont want to be stung with one with a boot password issue.
I have though about eBay to get one with a smashed screen, but I am also afraid of liquid damage too.
Thanks and I look forward to hearing form you guys.

Well, most people usually end up coming to me sooner or later, so if you'd like my help I may be able to get you one of the rare 08/08 nvidia boards, or an intel board. If you'd like my help send me your model, serial and date code in a PM (don't post the serial in the forum).
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Good Source for SATA HDD enclosures?

Similar Messages

Maybe you are looking for