Good tutorials and e-books on JavaCard development?

Please advise if there are any e-books or good and detailed tutorials on JavaCard development. I have found some materials on JavaCard but non of those teaches you how to actually create JavaCard applications. For example to store and retrieve personal details.
Thank you very much.

Actually a good way to learn is to look at sample codes, however a good book would be http://www.amazon.com/gp/product/0201703297/sr=1-2/qid=1155738340/ref=pd_bbs_2/002-9993337-3908866?ie=UTF8&s=books
There are plenty of codes on SUN.

Similar Messages

  • HT201359 I purchased a audio book to listen to on my commute to work. It only works over wifi, that does me no good in the car and the book is hours long for audio. That will eat up my data. How can I get a refund?

    I purchased a audio book to listen to on my commute to work. It only works over wifi, that does me no good in the car and the book is hours long for audio. That will eat up my data. How can I get a refund?

    How are you trying to listen to it ? You shouldn't need to be online to listen to it, I don't for any of mine. If you've downloaded it directly on your iPad (or synced it from your computer) then it should be in the Music app (you will get an Audiobooks option under the More button in the Music app when you have audiobooks on it) - is that where you are trying to listen to it ?

  • Some good and quick books

    Hi
    pls help me learn EJB as quick as possible. I have worked on some stateless session beans and CMP entity beans using JBuilder.
    I want to know what all aspects of EJB one must learn and what should i refer for a good theoritical and practical in and out of EJB in a fast way.
    I have Mastering EJB (Ed Roman).
    Thank You
    Also tell me what all technologies one must be aware of and how to learn them.

    Bitter ejb is a great book for beginners.
    It's definately not a reference manual, it talks about the important issues.
    You can read it straight through.

  • When I use voice over to read an epub in my Ibooks app, which is in Dutch, sometimes he start reading a book with an English Female voice and some books he reads with the Dutch male voice (which is good). All my epubs are Dutch books. Can i fix this probl

    when I use voice over to read an epub in my Ibooks app, which is in Dutch, sometimes he start reading a book with an English Female voice and some books he reads with the Dutch male voice (which is good). All my epubs are Dutch books so the English voice sound terrible trying to pronounce Dutch. Can i fix this problem? Thanks, Tom

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Any good tutorials for using jQuery and ColdFusion to build mobile apps

    Does anyone know of any good tutorials for using jQuery and ColdFusion to build mobile apps?
    Thanks!
    Lee

    I was just this moment looking at this website http://jquerymobile.com/
    Then for you a Google search on Jquerymobile and coldfusion
    http://www.google.co.uk/search?q=jquerymobile+and+coldfusion&ie=utf-8&oe=utf-8&aq=t&rls=or g.mozilla:en-GB:official&client=firefox-a
    http://jquerymobile.com/resources/
    Brings me onto this tutorial
    http://www.raymondcamden.com/index.cfm/2011/8/26/Making-jQuery-Mobile-templates-even-easie r--with-ColdFusion

  • Any recommendations on productivity for database and project management, Bento was good but no longer sync with ical and address book

    I've unfortunately updated to the new Bento on MakBook and iPad and synced my data and in the process it tells me that iCal and Address books will not sync any more.  I have several projects I am working on and looking for something that will syn with iCal, address book and Busy Cal to manage my  time efficiently and seamlessly. Help?

    I think you're in the wrong forum - this is for developers, who write programs for apple products.
    As for Bento, their problem is due to Apple's changes in the API.  The code that syncs with calendars and contacts is now deprecated, which means at some point in the future, it will no longer work.  This problem will affect all developers, so you probably won't find any replacement for Bento.

  • Best book for Web Developer learning flash

    I've gotten far on my own just using online tutorials and dinking around in Flash on my own but my boss(es) are starting to ask for more complex stuff that I simply can't learn by just piecing together my Flash education.
    I know there's many, many books out there that will teach you Flash but can anyone recommend any particular one(s) that are more concentrated in creating Web elements as opposed to game or animation development?
    Thanks in advance for any suggestions.

    I hope this link would be helpful for you books For web developer Using Flash by "William Sanders"
    URL: http://search.oreilly.com/?q=Web+Developer+learning+flash&submit.x=9&submit.y=11
    Best Regards,
    Jake Bull
    Assistant Manager
    Recovery Bull Software

  • Sharepoint Tutorials and useful links

    Hello,
    I am beginner in Sharepoint (just started learning from two weeks) , I am searching for sharepoint  tutorials with complete concepts and examples and any website links which provides complete understanding about sharepoint.
    Suggest any tutorials and website links.
    Regards
    Neenu

    Perhaps you may find it easy to first establish fundamental concepts and apply these via code. Following are some of the links which will give you good understanding. The resources mentioned are all free of charge.
    Microsoft SharePoint Developer Site (Tutorials + Hands on Lab )
    http://www.microsoft.com/click/sharepointdeveloper/html/Default.html
    SharePoint Developer Screencasts
    http://msdn.microsoft.com/en-us/office/aa905382.aspx
    SharePoint Technet Magazine (Relatively advance topics , hard to find else where in similar capacity)
    http://technet.microsoft.com/en-us/magazine/cc135961.aspx
    SharePoint MSDN Magazine (Solid material for developing deeper understanding)
    http://msdn.microsoft.com/en-us/magazine/ee532094.aspx?sdmr=sharepoint&sdmi=topics
    http://razi.spaces.live.com/

  • Good tutorials for objective C?

    Can anyone here refer me to some good tutorials for learning objective C? (targeting iOS)
    Thx.

    poltergeist_ wrote:
    It really depends what you want to do. If you want to program native business applications for iOS, AS3 is obviously not the right choice. If you want to do Rich-Media crossplatform applications, you're much better of with AS3 than developing a couple of native applications.
    I'd argue it doesn't really matter if you're developing cross-platform or not; AS3/AIR for iOS not only becomes much more work than need be, the app is much less stable and presentable as a professional level app. (and I'm developing multimedia app, not a business application, BTW). I guess after all is said and done, I really feel like I'm building a house of cards with AIR for iOS.
    When AIR requires using and manipulating stageWebView just so you can have native scroll behavior, when you have to rely on multiple third-party ANEs for basic iOS UI which may or may not get updated as each new OS rolls out, when Adobe ignores or brushes aside important bugs or dismisses the inclusion of core iOS features simply because they aren't also available on Android....
    I really like the Actionscript language. It's really easy to understand and great for those of us without a degree in Computer Science. But Adobe needs to get serious about supporting iOS.

  • Finder and address book problem

    A week ago I added a new (wired) keyboard because the old wireless keyboard was broken. There was a 2 day interval where I used an old G4 USB keyboard as a temporary stand in. I installed more RAM at the same time.
    Since then columns view in finder doesn't work. Folders will open OK but click any document and finder relaunches back to the finder window that was open at log-in. In icon view and list view everything seems to work fine.
    Address book is broken too. The window has most bits missing. There is a search field, the 'Address Book' title and the word 'Edit' with no button at the bottom. There are no data fields - no names, no addresses.
    There's a minor glitch with Mail too. The font color for some mailbox folder labels changes from black to white intermittently. Quit Mail and re-open and it reverts back to black. The program seems to work fine.
    First thought - preference lists.
    I've trashed AddressBook.plist, finder.plist, FontFavorites.plist with no joy.
    Second thought - user accounts
    Same for all users on this machine.
    The Address Book works fine on another machine (a G4 networked to this G5). However trashing the G5 Address Book and copying the good one from the G4 doesn't work.
    The data seems to be intact because copying AddressBook.data from the G5 to the G4 seems to show a complete file.
    Anyone out there got any ideas about what next? I can live without column view but it's a nuisance. I can't live without my address book.

    No joy. Verified disc, ran 10.4.10 Combo Updater PPC, restarted and then repaired permissions.
    Finder still relaunches back to where it started after log-in whenever I select a file (not a folder) in column view. Everything else in Finder still seems to work OK (and I'm getting used to using list view instead).
    Address Book remains the same. Open from the dock and the Address Book menus appear with no window. Select Address Book from Window menu and an aluminium window appears with no addresses. It looks just as I described at the beginning. The only thing that I hadn't noticed before is that, when I go back to the Window menu, Address Book appears twice with both ticked although there is only one (useless) window open.
    I've read through the Maworld article recommended by joshz and can't find any font problem that seems to relate to this finder issue. I've run Font Finagler which, I presume, has cleaned the font cache (whatever that might mean). All fonts seem to be working fine.
    The minor issue with Mail might be better. It was intermittent and perhaps it just hasn't shown itself in the half hour since I last restarted.
    Everthing else seems to be working fine and no new problem has developed.

  • How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

    How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
    I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
    I sure would like to decide about that myself.
    Thanks in advance if this will be changed.

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • Goods Receipt and Amoratization to Internal Orders (CO)

    Dear SAP Gurus -
    Please could you kindly assist in this matter.
    Our Production department is unable to upload the plan cost / unit cost to the 1st impression production order number, as stock was received before for the old title.
    Instead of creating new ISBNs the business used these existing 40 ISBNs and just changed the  titles.
    As such the plan cost /unit cost was uploaded to 2nd impression 02, goods
    receipt and actual invoice received also captured into 2nd impression 02.
    However for the internal order via KO03 for the 40 new titles were captured into 1st impression '01'
    Production dept is able to upload the plan cost
    / unit cost to the first cost internal order the last two digits carry 01 and
    actual invoice received is captured into 1st impression first cost 01.
    Will the First cost internal order amortised for 12 months upon the goods receipt.
    Question Can the 1st impression 01 first cost order internal order created via KO03 read the goods receipt
    which is captured in 2nd impression 02 in production order?
    I believe the business want to know if the goods receipt they have done against Production order 02 will trigger the amortisation of the costs on First cost internal order 01.
    So basically the concern is that the first cost internal order number 01 for these 40 titles maybe will be amortised upon
    the actual goods receipt as the receipt is captured in 2nd impression 02 for the production order.
    Please provide some feedback.
    Thanks.

    Hello,
    I try it from development environment , Create the  transport organize and transport it to product environment, then use SM56 transaction for reset buffer ( object CO_ABRECHN ) and put the NR status. so, you can transport it without preoccupation.
    Regards.

  • Goods Receipt and Goods Issue

    Hi Gurus,
    I am working on an interface where I need to work on a process that allows posting of Goods recipts and goods issue and for this I have been asked to create a custom transaction that will pull the data from the local file and replicate Goods receipt (MIGO) and goods issue process in Inventory Managemnt.
    Can anyone out there please help me out how to approach this development and what would be easiest way to accomplish this task.
    Help will really be appreciated.
    Thanks
    Rajeev...

    1.   Create a custom report which get the data from input file.
    2.   Populate the BAPI parameter with respective information and movement type.
    3.   Call BAPI - BAPI_GOODSMVT_CREATE .
    4.   Call BAPI_TRANSACTION_COMMIT.
    For the custome report you can create transaction and execute.
    I don;t have detail information - BAPI_GOODSMVT_CREATE  with example. Better you search on SDN.
    Regards
    Nilesh

  • Mail and Address Book text appears as gobbledygook

    The software headings and some of the input text in Mail and Address Book appears as random text symbols. For example in Address Book the headings beside the input boxes (Name, Tel, Fax, E-mail, etc) appear as random symbols. In the far right hand pane that shows the content of an Address Book entry, the two input boxes at the top that should display the christian and surname have also been replaced by random symbols.
    In Mail, again it's the software headings that have been corrupted (To, From, Date, cc. But also my signatures are also now made of randon symbols as is any text that I enter into the body of a new e-mail.
    This has not just happened and is the result of a series of problems.
    In order they were:
    1) created an Automator application to search my HD and copy all images (actually just after client photography and logos) to a folder called images on my desktop...I know stupid, stupid thing to do as I forgot about all of the millions of other images contained on the HD. By the time I realised my mistake my desktop (the 'put in folder' action clearly didn't work) was swarming with images but still running. I couldn't shut the app down and had to shut down the Mac with a Power button shut down. On rebooting, the desktop would not rebuild (with approx 11,500 images sitting on it, hardly surprising) and Finder kept crashing.
    2) Despite the crashed finder I managed to set up a new Admin user and log in on this. I considered a target disk mode transfer to another machine, but this would have transferd the desktop issue. Under the new login I then changed the ownership of the old User folders and transfered all of the User Library items across the new identity. This is probably not best practice, but with hideous work pressure and screaming clients I had to act swiftly.
    It is probably step two that has mucked things up. Everything else seems to be acting fine - even keychain access (the keychain was dragged across from the old user id) works fine after validating access when the alert window appears.
    Complete idiotic user error, I know and, frustratingly, I'm a pretty experienced user with a fairly good grasp of Mac systems...however, this has foxed me.
    Any urgent thoughts would be appreciated
    Kind regards
    Andrew
    G4 Powerbook Alu 15"   Mac OS X (10.4.8)  

    Thanks Eric, but unfortunately my Frankenstien Automator app was moving the originals and not making copies. I thank the gods I didn't roll out the app to the guys in the office before testing it myself. You could wreak havoc with these Automator apps if you so chose!
    I now have the hideous task of trying to relocate 11,500 images..clearly will never do it and will have to wait until I find missing images then go look for them. Unfortunately the app had eaten its way through my web site folder before I stopped it and the thousands of auto generated image slices, bullet points, etc have been scattered to the winds.
    Roll on Time Machine and OSX.5...plus a back-up regime or a 10gb iDisk account and 100mb broadband!
    Regards

  • Mail and address book data file location

    Does anyone know where mail and address book saves its data?
    My old mac died but I was able to remove the hard drive and mount it in a external firewire case. The drive mounts and appears in good shape. I tried using the migration utility to transfer my data into my new iMac. While a lot of data and applications did make the move, my mail files and folders did not show up on my new iMac. I'm hoping I can transfer the mail files manually. The problem is I can't find where they are located on my old computer. I was using Max os 10.4.11 on my old computer.
    The same problem with my address book data. It did not transfer over with migration app. and I can't locate this data either.

    The majority of Mail is in...
    /Users/YourUserName/Library/Mail
    AB...
    /Users/YourUserName/Library/Application Support/AddressBook

Maybe you are looking for

  • Crystal Report X1 compatibility with Visual Studio 2008

    We are migrating an application running on .NET 1.0 to .NET 3.5. Previously Crystal report X1 was working fine with .NET 1.0 however now when it has been migrated to .NET 3.5, we are able to generate crystal report but print and export functionality

  • Display Error - People Search Results Page

    Hi Can anyone help me figure out what I've done wrong with this code to get this error?  I'm not a programmer so I'm just trying to get this one thing fixed.  Thanks! Display Error: The display template had an error.  You can correct it by fixing the

  • Downloading music when out and about

    If i am out and about and download a song or app on my phone (using itunes) will this use any data allowance?

  • Two Iphone 4 and 1 3GS in house with syncing issues

    How do I sync my phones when we have only one computer? Also, when I purchase something on one of my phones can it be for all my phones?

  • Combining multiple pages files into one file?

    Sorry if this is a dumb question, but I really did try to find the answer both in the Pages documentation and the forums and couldn't find even a similar question! I have a 90+ page document I created that contains many photo's, and other graphic ele