Good wireless in house, slow Apple TV in downloads and syncing.  ATV issue?

OK - I just did a internet Ping test and bandwidth test and have found that my overall bandwidth is good, but my ATV is still very slow on downloads and syncing.
My bandwidth is over 6.6mbps and ping rates are nearly 45ms.
Here is my issue - I often have no images show up on ATV when I am browsing the movies. I also have to restart for lack of response to the remote about every other day, sometimes every day.
Am I looking at my wireless in the house (running Time Capsule) or is this an ATV issue? I have good overall connectivity and internet downloads via iTunes, etc.
Your insight is appreciated.
Sproles
Message was edited by: thesproles
Message was edited by: thesproles

You may or may not already have your network set up correctly, it's just that I can't tell from what you have said.
I have a main router provided by my ISP, I have several other Airport Extremes and Airport expresses connected by Ethernet, all set up to bridge the network created by the main router.
Each maker has their own settings, but bridging should be reasonably obvious. In simple terms my main router distributes IP addresses to all devices, the Airports bridge that network by passing these addresses to the devices from the main router. A base station that isn't in bridging mode will distribute its own addresses to the devices connected to it.
I don't really follow your next point.
instruction for configuration vary from manufacturer to manufacturer, the best course of action here is to refer to the manual. If everything is set up properly the addresses of everything on your network will have identical sets of numbers for the first 3 of 4 groups of numbers that make up an address, the last set must always be different. I think the part you are referring to with your DD-WRT is the option to have Ethernet and wifi bridged or not.
Some routers may be easier to configure than others, but generally speaking they should all work with the Apple TV. 5Ghz is less likely to suffer interference but it is much more likely to be blocked by solid objects, it may or may not be an advantage.

Similar Messages

  • What is a good wireless printer that will work with a macbook and windows laptops?

    What is a good wireless printer that will work with a macbook and windows laptops?

    Any printer that visibly supports OS X will work fine. My personal recommendation is Brother, followed rather distantly by Canon.
    Recently I have grown to favor Brother printers over the others. They are inexpensive, their OS X integration is well-implemented, their consumables are reasonably priced, and their technical support is free forever. If you need to call them and explain that you have a Mac, you will immediately receive competent assistance.
    The third and subsequent choices are so far down from those two they're not worth mentioning. I have grown to dislike HP printers, for all the above reasons.
    Read user reviews from vendor websites - Amazon is a good place to start, since Amazon lets people write almost anything they want... right, wrong, or completely idiotic.
    Read the reviews on the respective manufacturers' websites as well, but consider the likelihood of them deleting negative reviews.
    Process all those user reviews employing your own common sense, and draw your own conclusions.
    Consider AirPrint compatibility for future needs. Those features add very little to the price over a USB - only or wireless printer. Understand that not all wireless printers are AirPrint compatible - AirPrint must be specifically indicated. Choose among this list: http://support.apple.com/kb/ht4356
    After OS X compatibility, the next consideration should be the cost of consumables. Laser printers are cheaper than inkjets in that regard.
    Here is a list of AirPrint compatible Brother printers and multifunction devices

  • 2nd day w/my ipad2.  Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started."  I get music symbol when click ipod

    2nd day w/my ipad2.  Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started."  I get music symbol when click ipod.

    http://support.apple.com/kb/ts1567

  • HP printer stopped printing wirelessly, available driver from apple will not download. Now What? No printer at all!

    HP 6500A Plus wireless printer quit printing wirelessly but still printed wired. The printer connects to the wireless router (linksys EA6100),  I am running OS X Lion. Decided to see if needed updated software for printer. Went to HP website and downloaded full version driver for this printer/fax/scanner. I set up the printer for wireless printing, it connected to wireless network, but the macbook does not find the printer on the network. Discovered that if I setup wireless connection again from printer touchscreen and re-added printer to the printer list on my macbook pro, then I could print one document. To print again I had to go through that process again. Have downloaded and installed this driver several times now over course of a week.
    Today I decided to download just printer driver. Went to HP website, driver is available and HP actually has you use the apple software update to pull this one. Apple Software Update says software is available for this printer, I also confirmed that on a list of available software on apple website, but while it is downloading it stops and gives me a message that software is not available. Now I can not even print wired. I have tried process several times. What do I do now?  I have a scanner and fax, but no printer!!

    I am sorry for the delay in answering.  TWC email sometimes takes several days to get to me.
    I am embarrassed to say that I did not read closely the message that was provided when I clicked on Control Clicked / Open.  I did go back and continue the process and thought I had installed the update.  The end message stated that the installation was successful, but I could not find the scanner anywhere, even with intense searching.  I have reinstalled it twice again with no scanner installed.  I did find files in the Saved Application State but they take only a few KBs of space and the software should have taken 22.4 MBs.
    I have messages now posted in two different HP Communities and will continue to try that route to help, but right now it looks dismal.  If you have any more explanations or advice I would love hearing from you.  Could the Trovi component cause this problem?  I thought I was rid of it but I don't really know what to look for other than not having it take over my home page - which it has not done recently.
    I really appreciate your help, and I take your advice to heart about not using the older CD and I will not attempt to revert to Snow Leopard.  I am really afraid it would mess up iPhoto  and that would be devastating. 

  • HI there, am having a big problem updating mu iphone due to me forgetting my password, can you tell me how to retrieve it. It seems like i have one apple id for downloads  and a different one for updates. Can you help ps.?

    Hi There
    Am having a big problem updating my iphone 4 Apps, due to a problem with my password for my apple id. But it seems that i have two different ids, one for the updates and another for the downloads. I am not able to retrieve my Id password for updating my Apps. Can you help me ps?
    Thank you

    What program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
    If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
    How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager?

  • Slow i7 MacBook Pro startup and battery life issues

    Hi Everyone,
    My i7 2.66GHz 15" MacBook Pro with 8GB of RAM does a couple of things that worry me
    1. The battery life is poor, 127 Charge Cycles, 6 months old. I'm sat on Chrome with one window open and it's reading 3hr 16 min on 83%
    2. The startup into 10.6.5 is painfully slow. It seems to load up the menu bar at the top and hang mid flow, just before the battery status and time remaining appear.
    Any ideas?
    Thanks in advance! Mike
    Here is a copy of my startup log:
    Jan 8 00:49:06 localhost com.apple.launchd[1]: * launchd[1] has started up. *
    Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_manager): Bug: launchdcorelogic.c:6487 (24208):22
    Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_server): Bug: launchdcorelogic.c:6487 (24208):22
    Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_start): Bug: launchdcorelogic.c:6487 (24208):22
    Jan 8 00:49:12 localhost blued[15]: Apple Bluetooth daemon started
    Jan 8 00:49:12 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-258.13 (Oct 8 2010 17:10:30) starting
    Jan 8 00:49:12 localhost configd[14]: network configuration changed.
    Jan 8 00:49:12 MikeMBP15 configd[14]: setting hostname to "MikeMBP15.local"
    Jan 8 00:49:12 MikeMBP15 configd[14]: network configuration changed.
    Jan 8 00:49:12: --- last message repeated 1 time ---
    Jan 8 00:49:12 MikeMBP15 mDNSResponder[18]: Adding registration domain ibodge.members.mac.com.
    Jan 8 00:49:14 MikeMBP15 configd[14]: network configuration changed.
    Jan 8 00:49:21: --- last message repeated 1 time ---
    Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 18: uname: command not found
    Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 20: [: -lt: unary operator expected
    Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 31: [: -lt: unary operator expected
    Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 35: [: -lt: unary operator expected
    Jan 8 00:49:24 MikeMBP15 com.rogueamoeba.hermes[57]: unknown action: update
    Jan 8 00:49:25 MikeMBP15 com.apple.launchd[1] (com.rogueamoeba.hermes[57]): Exited with exit code: 1
    Jan 8 00:49:28 MikeMBP15 com.autodesk.backburner_start[60]: /usr/discreet/backburner/backburner: line 16: whoami: command not found
    Jan 8 00:49:28 MikeMBP15 com.autodesk.backburner_start[60]: Must be root to run.
    Jan 8 00:49:28 MikeMBP15 com.apple.launchd[1] (com.autodesk.backburner_start[60]): Exited with exit code: 1
    Jan 8 00:49:31 MikeMBP15 bootlog[48]: BOOT_TIME: 1294447746 0
    Jan 8 00:49:31 MikeMBP15 awacsd[24]: Starting awacsd connectivity-32 $Rev: 907 $ (Sep 29 2010 19:07:17)
    Jan 8 00:49:31 MikeMBP15 awacsd[24]: Connecting AWACS client: ibodge hello.connectivity.me.com
    Jan 8 00:49:32 MikeMBP15 com.apple.usbmuxd[29]: usbmuxd-207 built for iTunesTenOne on Oct 19 2010 at 13:50:35, running 64 bit
    Jan 8 00:49:32 MikeMBP15 VMware Fusion 332101[82]: Starting VMware Fusion:
    Jan 8 00:49:32 MikeMBP15 com.vmware.launchd.vmware[55]: VMware Fusion 332101: Starting VMware Fusion:
    Jan 8 00:49:38 MikeMBP15 WDSmartWareD[53]: Daemon Start -- User registered
    Jan 8 00:49:40 MikeMBP15 repair_packages[84]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    Jan 8 00:49:40 MikeMBP15 com.vmware.launchd.vmware[55]: 2011-01-08 00:49:40.719 repair_packages[84:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    Jan 8 00:49:40 MikeMBP15 repair_packages[84]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    Jan 8 00:49:40 MikeMBP15 com.vmware.launchd.vmware[55]: 2011-01-08 00:49:40.723 repair_packages[84:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    Jan 8 00:49:42 MikeMBP15 com.vmware.launchd.vmware[55]: Verifying files from package 'com.vmware.fusion.application' on '/'.
    Jan 8 00:49:42 MikeMBP15 com.vmware.launchd.vmware[55]: Finished verifying files from package 'com.vmware.fusion.application' on '/'.
    Jan 8 00:49:50 MikeMBP15 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
    Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: UUID: Unable to open /dev/mem: No such file or directory
    Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
    Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Adapter: en1, Inactive
    Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Failed to read SCproperties for key: State:/Network/Global/IPv4
    Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Stopping bridge for:
    Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
    Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Started bridge for 2, en1
    Jan 8 00:49:52 MikeMBP15 com.apple.launchd[1] (0x1005020b0.anonymous.vmnet-netifup[117]): Failed to add kevent for PID 117. Will unload at MIG return
    Jan 8 00:49:52 MikeMBP15 com.vmware.launchd.vmware[55]: Started network services
    Jan 8 00:49:52 MikeMBP15 vmnet-bridge[105]: Preferences changed called
    Jan 8 00:49:52 MikeMBP15 com.vmware.launchd.vmware[55]: Verifying and re-installing files from /Library/Application Support/VMware Fusion/thnuclnt
    Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Starting Aladdin USB daemon
    Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: /Library/StartupItems/Digidesign Mbox 2/Digidesign Mbox 2:start
    Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Starting Digidesign Mbox 2 Configuration Service
    Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: PACESupport - launchd already started us
    Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Requesting load of /System/Library/Extensions/DigiDal.kext.
    Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: /System/Library/Extensions/DigiDal.kext loaded successfully (or already loaded).
    Jan 8 00:49:54 MikeMBP15 configd[14]: network configuration changed.
    Jan 8 00:49:54 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
    Jan 8 00:49:54 MikeMBP15 vmnet-bridge[105]: Started bridge for 0, en1
    Jan 8 00:49:57 MikeMBP15 coreaudiod[157]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: Sat Jan 8 00:49:57 MikeMBP15.local coreaudiod[157] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Jan 8 00:49:57 MikeMBP15 coreaudiod[157]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
    Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: coreaudiod: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
    Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
    Jan 8 00:49:57 MikeMBP15 loginwindow[37]: Login Window Started Security Agent
    Jan 8 00:49:57 MikeMBP15 WindowServer[90]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Jan 8 00:49:57 MikeMBP15 com.apple.WindowServer[90]: Sat Jan 8 00:49:57 MikeMBP15.local WindowServer[90] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Jan 8 00:50:08 MikeMBP15 SecurityAgent[159]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
    Jan 8 00:50:09 MikeMBP15 loginwindow[37]: Login Window - Returned from Security Agent
    Jan 8 00:50:09 MikeMBP15 loginwindow[37]: USER_PROCESS: 37 console
    Jan 8 00:50:09 MikeMBP15 com.apple.launchd.peruser.501[172] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.folabs.proremote[197]): open("/var/log/ProRemoteServer/out.log", ...): No such file or directory
    Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.akamai.client.plist[199]): Bug: launchdcorelogic.c:4139 (24208):13
    Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.folabs.proremote[197]): open("/var/log/ProRemoteServer/error.log", ...): No such file or directory
    Jan 8 00:50:16 MikeMBP15 com.folabs.proremote[197]: /Library/Application S
    Jan 8 00:50:16 MikeMBP15 com.folabs.proremote[197]: upport/ProRemote/ProRemoteServer.conf
    Jan 8 00:50:17 MikeMBP15 ProRemoteServer[197]: Listening for MIDI: /var/tmp/com.folabs.proremoteserver/socket
    Jan 8 00:50:17 MikeMBP15 ProRemoteServer[197]: Listening for Remote: [8183]
    Jan 8 00:50:19 MikeMBP15 com.apple.launchd.peruser.501[172] (com.apple.Kerberos.renew.plist[193]): Exited with exit code: 1
    Jan 8 00:50:19 MikeMBP15 ServerScanner[189]: Preference says we shouldn't scan
    Jan 8 00:50:22 MikeMBP15 StatusMenu[205]: Attempting to monitor /Library/Application Support/WDSmartWare
    Jan 8 00:50:22 MikeMBP15 StatusMenu[205]: Monitoring /Library/Application Support/WDSmartWare
    Jan 8 00:50:23 MikeMBP15 MediaLinkHelper[212]: MediaLinkHelper: Starting up…
    Jan 8 00:50:23 MikeMBP15 Rowmote Helper[214]: Est <AsyncUdpSocket: 0x317cc0> (5843)
    Jan 8 00:50:26 MikeMBP15 netsessionmac13d7a2d[199]: * __NSAutoreleaseNoPool(): Object 0x608460 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:50:26 MikeMBP15 netsessionmac13d7a2d[199]: * __NSAutoreleaseNoPool(): Object 0x608490 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:50:26 MikeMBP15 MediaLinkHelper[212]: DeviceManager: Initializing local device: NRMediaServerDevice…
    Jan 8 00:50:26 MikeMBP15 MediaLinkHelper[212]: RootContainer: Root container initialized!
    Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRAlbumArtTranscoder…
    Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRDirectTranscoder…
    Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRJPEGTranscoder…
    Jan 8 00:50:28 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRMEncoderTranscoder…
    Jan 8 00:50:28 MikeMBP15 MediaLinkHelper[212]: DeviceManager: Registering remote device class: NRPlayStation3Device…
    Jan 8 00:50:29 MikeMBP15 MediaLinkHelper[212]: MediaLinkHelper: DeviceManager ready.
    Jan 8 00:50:31 MikeMBP15 VMware Fusion Helper[213]: Could not connect the action buttonPressed: to target of class NSApplication
    Jan 8 00:50:32: --- last message repeated 3 times ---
    Jan 8 00:50:32 MikeMBP15 pkgutil[224]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    Jan 8 00:50:32 MikeMBP15 [0x0-0x16016].com.vmware.fusionDaemon[213]: 2011-01-08 00:50:31.999 pkgutil[224:60f] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    Jan 8 00:50:32 MikeMBP15 pkgutil[224]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    Jan 8 00:50:32 MikeMBP15 [0x0-0x16016].com.vmware.fusionDaemon[213]: 2011-01-08 00:50:32.002 pkgutil[224:60f] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100b1c960 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e419c0 of class NSURL autoreleased with no pool in place - just leaking
    Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e53020 of class NSURLRequest autoreleased with no pool in place - just leaking
    Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e42580 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e51380 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e52970 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e54350 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:50:51 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100b788c0 of class NSHTTPURLResponse autoreleased with no pool in place - just leaking
    Jan 8 00:50:51 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e54540 of class NSCFData autoreleased with no pool in place - just leaking
    Jan 8 00:51:28 MikeMBP15 Apple80211 framework[178]: Scan() error 16 (Resource busy)
    Jan 8 00:51:28 MikeMBP15 Apple80211 framework[178]: __performScan() EBUSY, sleep 1 sec, try again
    Jan 8 00:51:46 MikeMBP15 [0x0-0x1b01b].com.apple.Safari[229]: Canceleld; 0; Empty 1
    Jan 8 00:52:23: --- last message repeated 162 times ---
    Jan 8 00:51:46 MikeMBP15 [0x0-0x1b01b].com.apple.Safari[229]: Canceleld; 0; Empty 1
    Jan 8 00:52:25: --- last message repeated 6 times ---
    Jan 8 00:52:25 MikeMBP15 System Preferences[236]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    Jan 8 00:52:57 MikeMBP15 System Preferences[241]: dlopen_preflight failed with dlopen_preflight(/Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane/ Contents/MacOS/AkamaiNetSession): no suitable image found. Did find:\n /Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane/Contents/MacOS/Ak amaiNetSession: GC capability mismatch for /Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x7fff7101c490 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x10210bcd0 of class NSURL autoreleased with no pool in place - just leaking
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e3fcf0 of class NSURLRequest autoreleased with no pool in place - just leaking
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x10210bcd0 of class NSURL autoreleased with no pool in place - just leaking
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e45460 of class NSCFDictionary autoreleased with no pool in place - just leaking
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e43e50 of class NSError autoreleased with no pool in place - just leaking
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e46e60 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e45100 of class NSCFString autoreleased with no pool in place - just leaking
    Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e1cf30 of class NSConcreteMutableData autoreleased with no pool in place - just leaking
    Jan 8 00:55:10 MikeMBP15 [0x0-0x20020].com.apple.Safari[244]: Canceleld; 0; Empty 1
    Jan 8 00:55:11: --- last message repeated 317 times ---
    Jan 8 00:55:11 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: [0108/005511:INFO:/b/build/slave/chrome-official-mac/build/src/chrome/app/break pad_mac.mm(89)] Breakpad disabled
    Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class CrApplication is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.
    Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class NoOp is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.
    Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class TaskOperation is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.

    There seems to be a lot of unanswered questions floating around here.
    Its kind of scary seeing some of these "issues" and not seeing any answers.
    I just spent 3 g's on a 2011 mbp, and I am really hoping all the great things that I've learned about Apple still rein true. Those are the only reasons I bought one.
    My startup is very slow as well. 

  • Apple TV, My Receiver, and Potential HDMI Issues...?

    Hey all
    Okay, I'm about to bite the bullet and snag myself an Apple TV, but I have a couple of wicked-fast questions that I think I know the answers to — but I'd like confirmation.
    1. If I get an Apple TV, I want to run it through my main receiver, so my plan would be to connect the ATV HDMI to my receiver like all my other components (my Onkyo has a single HDMI out, BTW). This will treat the ATV like all my other components as far as sound through my mains, etc.
    Am I correct to assume this will work? Apple's docs seem to want you to connect directly to your TV...
    2. I have heard that upon upgrading to the v3 software that was just released, some people are having issues with the ATV recognizing when the receiver has switched to it, making an ATV restart necessary. Anyone having that problem? I feel it may be because these people are using legacy receivers...?
    THANKS!
    Maury

    {quote:title=Winston Churchill wrote:}
    I've got a brand new Denon AVR 4810Ci receiver that is current to the HDMI standard. I've got no other issues with HDMI sources other than the AppleTV.
    The problem is that the tv currently meets the HDMI standard too.
    So it's a little more complicated than just being tested to receive certification.{quote}
    Which must mean software / firmware. I also have 2 other devices passed through my receiver, connected by HDMI, without issue. Nothing on my set-up, software or hardware wise (both box and cable), has changed for about 2 years except for the various Apple TV updates. No problems with v1 or v2, yet v3.....

  • Apple TV, Hulu Plus, and Factory Restore issues.

    I have a Apple TV 3rd gen I believe. A couple weeks ago Hulu Plus stopped playing videos. I tried logging out and back in and when that didn't work I tried doing a Restore on the apple tv, but everytime it gets to a certain point it fails and tells me to try again. I'm at a loss of what to do. Please help.

    muna0001 wrote:
    Hulu has their app ready for apple tv but apple blocked them because they thought it competes to much with iTunes. By that logic I doubt apple will ever allow it on apple tv.
    Are you talking about this app?

  • Apple Tv 2, NetFlix and a new issue

    I am on the road, my Apple TV 2 and I are in Panama. Netflix has just, today, started service in Panama. I can access my account with my laptop without any issues. Apple Tv allows me to login, select programming and when I press paly I get this message.
    Your device must be updated to play instantly from Netflix. Visitmanufacturer's website or devices netflix.com / NRD for more information."
    Netflix says call Apple, they have no clue. SO I am here, anyone have a clue?

    Lee,
    I'm in the Dominican Republic and having the same issue.  Netflix will not work on my Apple TV 2, iPad or iPhone.  Looks like Netflix needs to update it's Apps.

  • Apple TV photo format and syncing

    I just got an apple TV and had it working for a day. Now when I add more photos I get a blank screen when I select my photos in the menu. The funny thing is that my photo are definitely on the apple TV unit as it will start rolling through the images in its screen saver mode when the unit is left alone for a few minutes. Also, my music will no longer play and I have also lost all the other functions. My file format is Adobe PNG files selected straight from my desk top. It was actually working at first???

    Make sure the content is suitable for the Apple TV, the first generation model cannot play 1080p HD.
    If your problem persists, remove all the cables for 30 seconds and then try again.

  • Apple ID, app downloads and removing devices

    Question 1:
    I have 2 Apple ID, the one I use now is ******.******@live.co.uk the old Apple ID was ******-******@live.co.uk but while I am not using this Apple ID some apps/music I am downloading are going through the old Apple ID, I have no idea why or how and I have forgotten the password for it anyway so can someone tell me why this is happening and how I stop it? also is there any way to delete the old Apple ID?
    thanks
    Question 2:
    all the apps I have downloaded even the ones not in use (some of which I will never use again) are still stored in iCloud, is there any way to permanently delete apps which have previously been downloaded?
    thanks
    Question 3:
    how do I permanently delete products i.e. iPhone 4s, iPod, iPad etc which I no longer have that are linked to my Apple ID ******.******@live.co.uk

    1, what do you mean 'going through the old Apple ID' ?
    You can reset an account's password via http://iforgot.apple.com
    You can't delete an account, you can only remove any personal info from it and stop using it - all content that was downloaded with it will remain tied to it.
    2, you can't permanently delete any item from your purchase history, all you can do is hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases
    3, delete them from where ? If you mean your support profile then you can log into your account and remove them : https://supportprofile.apple.com/
    If you mean the 'manage devices' section of your account then you can remove them by logging into the account via your computer's iTunes : iTunes Store: Associating a device or computer to your Apple ID

  • Display and Syncing Apple TV in iTunes for Windows

    I have been out of luck getting my Apple TV to display and sync properly in iTunes for some time now. I found a solution to share. I enabled UPnP on my router and voila, no more problems.

    After lots of research and trial & error I have answered my own question. Hope this helps anyone with the same issue.
    When I purchased ATV3 I wired it directly to my router. In ATV3 under Settings > General > Network, I recorded the MAC address of my ATV3. I use MAC filtering for my network. This way I don't have any network passwords, but just add a list of approved devices by putting in their MAC address. This allowed me to do everything on ATV3 as it was connected.
    Here's where I found my solution... I disconnected the network cable from ATV, then I noticed that I was no longer connected to the internet. Going back into the network settings I noticed a very subtle detail. The last letter of the MAC address now showed a C, where it was a B before. I added this second MAC address to my router's list, and then had wireless internet working fine with ATV3. I then tried going into iTunes on my computer, clicked on AirPlay, then tried to click on the Apple TV. It still had the padlock symbol beside it, but now I was able to click on it, and type in my password (used my main iTunes account password). Everything worked.
    The solution was not that I didn't have a connection, it was just that my connection was only wired, and I needed to also have it connected to the wireless (so add the second MAC address). So to those people out there who want to have ATV wired to the internet, note that you do need to be wirelessly connected to the network for some of these features (even if you're directly plugged into the router for that network).

  • Apple Software Update download is SLOW...

    Hi everyone, I've been experiencing VERY slow download speeds from Apple's Software Update throughout the weekend. I'm on a DSL line, no firewalls, and am getting normal performance at other sites/servers, but downloads from Apple are coming in at sub-dialup speeds.
    The downloads start fine, then quickly taper off from 120 Kbps or so down to 5-6 Kbps, within just a few seconds. The problem occurs whether I use Software Update or try to access a file directly from Apple's Support Downloads page. iTunes app updates seem to have the same issue.
    Any suggestions would be most welcome!

    I'm not quite sure exactly what fixed the issue, but I did a complete reset and reconfig on my Linksys router and set up the connection to my ISP/DSL provider, and it seems to have improved. Never did track down the specific issue, though. I'd be curious if anyone is able to identify the cause.
    When I was troubleshooting, I switched to a direct DSL connection via my Ethernet port, and got full speed downloads from Apple, so the wireless connection was definitely the issue for me....
    Good luck all!

  • WiFi Setup in Large House multiple Apple Hardware Devices -Help Please!

    Hello:
    I have tried to solve my wifi issues over the past months, but I am stuck. I recognize that this is a little involved, so let me apologize in advance.
    I do not expect someone to be willing to take the time regarding this, but if someone could at least read this and give me some general pointers, that would be great.
    Highlights of current problems - we cannot consistently print documents from our printer, which is connected via an airport express (note that the airport express is wired to the internet with Cat 5e, we cannot consistently stream itunes music, we have too many separate wifi networks - we prefer one wifi network, if possible. Most recently, I have been trying to extend or join my own existing networks, and I do not understand the difference in terminology, and in any event, neither attempts worked as I kept getting error messages and the amber lights stayed on.
    Goals - We would like to have seemless wifi throughout our old, larger sized house with ability to stream iTunes music from an apple computer or via Airtunes from an iPhone, and print from any computer or from any iPhone or iPod, and ability for guests to join wifi with a password and have such connection be good throughout our house. I prefer not to have to manually select different wifi networks as we move around the house with an iPhone or Macbook Pro. Also, I often get prompted for wifi passwords (depending on which of my airport expresses comes into range) and I would like to avoid putting the passwords in each time. Or one signal gets weak and my device does not know that it should switch to the wifi network with better reception. I would like to be able to walk from point A to point B and have my wifi connection work continuously behind the scenes. And I would like to be able to play music on receiver, and control same via our iPhone and iPods.
    Hardware -
    Basement: Verizon Fios wireless Router, Ethernet Network switch with multiple Cat 5e ethernet cables going to different locations in the house.
    1st Floor: Macbook Pro connected to internet via ethernet; 1 previous generation Airport Express connected to internet via ethernet, with a printer cable going from Airport Express to a printer and an audio capable going from Airport Express to a receiver. If possible, I would like that same Airport Express to provide wireless access. I also have a non-apple wifi device that is recessed in the ceiling, I think it is by On Q/Legran and this non-Apple wifi device is connected via ethernet.
    2nd Floor: Older generation iMac (purchased in around 2005) that is not connected to ethernet, 1 Airport Express (new version) connected to ethernet; 1 additional Airport Express (new version) connected to ethernet; 2nd MacBook Pro which relies on Airport Express.
    3rd Floor: Apple Time Capsule connected via ethernet cable, Apple TV sitting right next to Apple Time Capsule, with HDMI cable running from Apple TV to home theater receiver.
    Any assistance would be greatly appreciated!
    Thank you!

    Hello JoJo121. Welcome to the Apple Discussions!
    To achieve having "one" wireless network throughout the house, we just need to configure all of your base stations for a "roaming" network. With this type of network, a laptop could literally roam from room-to-room and still be on the "same" network.
    You already have one of most important parts of this type of network and that is you have an Ethernet infrastructure where you want wireless to be provided.
    The FiOS router should not need any configuration changes.
    Setup the 802.11b/g AirPort Express Base Station (AX), 802.11n AirPort Express Base Stations (AXn), & Time Capsule (TC) as bridges:
    o AirPort Utility > Select the base station > Manual Setup > Internet > Internet Connection > Connection Sharing: Off (Bridge Mode)
    For each AX, AXn, & TC in the roaming network:
    o Connect to the same subnet of the Ethernet network, i.e., they should all connect back to the Ethernet switch at the FiOS router.
    o Provide a unique Base Station Name
    o The Network Name should be identical
    o If using security, use the same encryption type (WEP, WPA, etc.) and password.
    o Make sure that the channel is set at least three channels apart from the next base station to prevent Wi-Fi interference.

  • Boot camp Windows xp SP2 wireless is extremly slow

    boot camp Windows xp SP2 wireless is extremly slow or doesn't work at all. It shows connected on weird 270Mpbs good connection. Other PC and laptops work fine. They are on Linsys wireless N GB router.
    I heard some people have problem with SP3, but I am on SP2. If I boot into MAC os, it works perfectly.
    It's MacBook 13, just bought it last week. All drivers are updated.
    Any suggestion?
    Thanks

    I tried what Snackyotter did with no success. I don't really use the Caps Lock Key, or the Option Key at boot, when I want to switch to Boot-Camp and Mac OS X I just change the Boot Disk in System Preferences & vise-versa. Thanks for trying to help though. This weekend I am returning my Apple Slim Wireless Keyboard at the Apple Store. I still have the original packaging and receipt, I bought it offline and received it a few days ago. If the return doesn't go as planned and I'm stuck with this keyboard I will keep this question labeled 'unanswered'. If the return does go well I will label it solved, there is no need really to keep this topic waving around when I no longer have the Apple Wireless Keyboard. I have never EVER even thought of returning an Apple product before, wish me luck. To Apple though I must say that I am disappointed that you have had many months to fix this simple issue since this keyboard came out, but have decided not to. I will try to keep you updated. Again Thank You for your kind support.
    tmt345

Maybe you are looking for