Good workaround for unanswered message filter?

Does anyone have a good workaround for Mail's lack of an 'unanswered' filter criterion? My mail is building up like crazy, And I really miss the ability to sort messages based on response.

Welcome to the discussions, Aaron.
Sort on the message status column. It is a good idea to get into the habit of disposing of a message as you answer it - either move it to a filing folder, or delete it - so your in box only contains unanswered messages.
AK

Similar Messages

  • Workaround for error messages

    Hi,
    when i projected my application i decided to define a String variable to contain the error message. Now i found i would have needed an array or something because i may have more than one error to display. Can anyone suggest a workaround? I don't know maybe i can concatenate this messages separated by i special character.... or ...

    . Can anyone suggest a workaround? I don't know maybe
    i can concatenate this messages separated by i
    special character.... or ...You could use a List to hold the error messages. Or you could try adding to the same String separated by some token. IMO, using a token separated String makes more sense. I''m not much in favour of using Collections to hold only Strings.

  • Is the "Wake Lock" app a good workaround for the Missed Calls/Texts issue?

    Back on Jun 18, at the beginning of the "Any One Having Missed Call Problem after ED04 ..." thread, wardcst24 posted that the Wake Lock app seemed to fix the issue of missing calls and that all calls now were received A-OK (not sure about texts).
    I think the train of thought is that after the Froyo / ED01 / ED04 updates, when the phone is in sleep mode it doesn't recognize some incoming calls and texts, but that this app keeps the CPU active enough to detect them when received.  There's probably a (minimal?) hit to memory / battery life / processing speed, but certainly acceptable vs missing calls.
    Has anyone had any luck with this or a similar app?  I can't test it since I'm still on 2.1 (never got around to upgrading to Froyo, sometimes it pays to be lazy . . . )..
    Here's the thread with the original Wake Lock reference:
    http://community.vzw.com/t5/Samsung-Fascinate/Any-One-Having-Missed-Call-Problem-After-ED04-Update-Post-Here/td-p/561962
    Joel

    It did work but when you would get a call wake lock would crash and if you didn't remember to reset it you would start missing calls again.
    It would consume 3% per hour
    I could not deal with having to remember to reset all the time so I sent my phone back to Samsung for the 5th time.
    There is another one that is said to work very well it is sofLocker
    https://market.android.com/details?id=otis8.softlocker
    I have not been able to test because Samsung has my phone for time #5

  • Best workaround for editing long AVCHD clips in CS6?

    Hi there, I've recently switched to CS6 and have run into incredibly long render times using native AVCHD clips (13 hours to encode a 30 minute m2v).  After reading many posts it seems the issue I am running into is a known bug.  So, my question is: is there a good workaround for this issue?
    It sounds like this issue is only on long clips.  Is it possible to automatically split the .mts files using another program (virtualDub?) prior to importing?
    If transcoding from the native format is required (until the fix) what would be the best method using Windows 7 64bit?  I have heard Avid's DNxHD is a good lossy codec, but I hate to do this if there is an accepted workflow I should learn instead.
    Thanks for any advice!
    -Stephen

    One of these message threads may have some help
    CS6 Bug AVCHD http://forums.adobe.com/thread/1004369?tstart=0
    -and http://forums.adobe.com/thread/1004369?start=0
    -and LOCK the media http://forums.adobe.com/thread/1077245

  • Best workaround for using Gmail to filter POP spam?

    I have 3 POP email addresses and get hundreds of spam mails per day. Can't handle having to delete them manually on the iPhone. I tried setting my Gmail account to check my POP emails and setting up my iPhone with only my Gmail account. Now I get all my POP email without spam, but then I can only send using my Gmail address (which I never use and don't want to). Any suggestions for a workaround?

    And the answer is… [according to David Pogue], columnist for the NY Times:
    A Smarter Way to Fetch E-Mail
    I know everybody's sick to death of hearing about Apple's latest i-product, so I promise not to even mention its name in this newsletter. But as I was trying to get my e-mail set up on that cellphone, I stumbled upon a delicious secret feature of Gmail, Google's fast, free, fantastic Web-based e-mail service. This is a trick that can help everyone, whether you have a cellphone or not.
    One big drawback of the Mail program on Apple's phone is that it has no spam filter. That's not a big deal if your e-mail comes from AOL, Yahoo or Gmail, because those services have pretty good spam filters of their own. But if you have some other kind of account-like a standard POP account (provided by your cable company, for example), you may be overrun by junk mail.
    I kept hearing from people who told me how they solved this problem: "Oh, I just forward my mail to Gmail," they say. "Then I set up my new phone to check my Gmail account instead of my regular address."
    Well, all right; it's easy enough to make your e-mail program auto-forward incoming mail your Gmail address. But there's a huge problem with that setup: Now all of your messages appear to have come from you, the forwarder. If you hit Reply on your phone, the response doesn't go to the original sender; it goes right back to YOU! It gets sent back to your desktop computer (or whatever computer is doing the forwarding).
    Clearly, that's no good. So I asked my tech guru, Brian Jepson, if there's any solution-and he told me about Gmail's new Mail Fetcher service. My problem was solved in five minutes.
    In essence, this feature tells Gmail to fetch messages from your existing POP account, so that it all shows up at Gmail.com. Better yet, Mail Fetcher offers you the chance to have outgoing messages stamped with your regular e-mail address. In other words, Gmail.com becomes a free, invisible mail processing center, leaving no trace of its involvement. The people you correspond with will never know that their messages, or your responses, went anywhere but straight to your computer and back.
    You can still check mail with Outlook, Mail, Entourage, or whatever program you're using now. But now you've solved the spam problem on your phone-and better yet, you can now check your regular POP e-mail-up to five accounts, in fact-at Gmail.com, from any computer in the world! Now, if all you want to do is keep in touch with e-mail while you're on vacation, you can leave your laptop at home.
    Here's how you set up this free, no-downsides arrangement. Suppose that your real e-mail address is [email protected].
    First, sign up for a free Gmail account at www.gmail.com.
    Once your account is active, visit Gmail.com. Click Settings, then Accounts. Under "Get mail from other accounts," click "Add another email account." Fill the e-mail settings for your main address: name, password, mail server address.
    If you like, you can also turn on "Leave a copy of retrieved message on the server." That means that you'll also be able to check your mail from Outlook, Mail, or whatever e-mail program you use, just as you always have. The Gmail account will just be a backup, a secondary, Web-based way to do e-mail.
    As you complete the setup process in Gmail, a message says: "You can now retrieve mail from this account. Would you also like to be able to send mail as [email protected]?"
    Click "Yes, I want to be able to send mail as [email protected]."
    In other words, when you reply, your main e-mail address, not Gmail's, will be the return address. It won't matter whether you send from Gmail.com or from your phone; it will all look like it came from Outlook, Mail, or whatever.
    You can add up to five e-mail accounts this way, consolidating them all in one place-a very neat trick. Gmail seems to check for new messages about every five minutes, and there's also a "Check mail now" button.
    I know this is all sounds much more technical than my usual writings; there's no way around it. The bottom line, though, is that Gmail's Mail Fetcher system solves a big problem for smartphone owners, and-by making your mail available on the Web-another big one for travelers. Nice.

  • Free goods master for STO or workaround to meet this requirement

    Dear Gurus,
    I use IS-retail and the situation we faced is we have got a deal from our vendor that if we buy article A will get article B for free. So we set a free goods master using condition type NR00. It work fine in purchase order we order to our vendor however when we create STO to distirbute product from our DC to store, there are no free goods concept in STO.
    Does anyone have a solution for this issue or workaround for this?
    we would like to have a subitem (Free goods item)pop up automatically when create STO from DC to store for the main article.
    Is there a way to goods issue for sto with no cost for free goods article?
    Regards
    Mintoo

    Dear Varun,
    I already tried and found that In STO , The free goods indicator is disable (suppress) unlike in normal PO. There might be a reason for this.  Do you any workaround on this?
    Dear Venkat,
    is there a way to use free goods master instead of using BOM. Our SD told that they need to change configuration to serve the sales set???
    Best Reagrds
    Mintoo

  • Message no. RU 195:Automatic goods receipt for order 619271463 is not possi

    dear expert:
    when i confirm the production order via co15  ,sytstm prompt :
    Automatic goods receipt for order 619271463 is not possible
    Message no. RU 195
    Diagnosis
    Order 619271463 contains several operations, which have a control key which indicates "automatic goods receipt".
    However, an automatic goods receipt is only allowed once per order for the following reason:
    If the automatic goods receipt is posted more than once, this would lead to incorrect stock quantities.
    Procedure
    Check the control keys of the operations in order 619271463. Change the control keys in such a way, that an automatic goods receipt occurs for one operation only.
    production order is confirmed  but it cann't be delivered automatically.
    help me analyse it .
    best reagards.

    Hi,
    In normal scenario in a production order each routing operation will consist a control key with settings for automatic goods reciept.
    So in a production order you can use only one control key with automatyic goods recipt. This will be the last operation of the order. From message mentioned by you it is showing as may u have mentioned auto goods reciept for more than one operation.
    PP01 is normal confirmation control key & PP99 is for milestone with auto goods reciept. PP95 - w/o milestone with auto GR.
    Please check control key & correct it.
    Hope this will help you.
    Regards,
    Ashish

  • Message no. BS007-Goods receipt for purchase order not allowed

    Hello SAP Experts,
    I have created an internal order to collect expense within the order.
    When I tried to reverse an GR against the PO created with the internal order assigned, the following Error occured.
    "Goods receipt for purch. order" is not allowed (ORD 145116170204)
    Message no. BS007
    Diagnosis
    The current status of object 'ORD 145116180204' prohibits business transaction 'Goods receipt for purch. order'.
    Procedure
    To process business transaction 'Goods receipt for purch. order', you first have to change the status of object 'ORD 145116170204' to allow the transaction 'Goods receipt for purch. order'.
    This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
    The order was previous TECOed, and change it's status to Release, but still have the error.
    Please give possible solutions. Thank you in advance.
    Regards,
    Steven Lin

    Hi Br. Ajay M,
    Released the order and Status line as follow
    REL  AVAC BUDG GMPS
    but the error changed while reverse the document
    item 0001 Order is invalid.
    Many thanks for your kindly reply.
    regards,
    Steven

  • Filter Infotypes based on Company Code for the Message Type HRMD_A

    Hi,
    I have a requirement to send different infotypes for different Company codes using the same distribution model for the message type HRMD_A.
    Example :
    For the BUKRS 2500 I need to send infotype 0000 ,0002,0006
    For the BUKRS 2600 I need to send infotype 0000 ,0008,0009
    It will be a great help for me if any one can guide me on that.
    Regards,
    Raka

    Hi ,
    Thanks for the reply.
    I alredy have done that . But its not working.
    Its working only for infotype 0001.
    If the infotype is there in any of the filter groups, the data will be sent irrespective of the Com Code.
    Regards,
    Raka

  • Enter goods receipts for vendor .... only (Message no. M7107)

    Dear all,
    I know there are postings on this topic but I was unable to find the information I need.
    We have designed a process whereby we issue some goods (slices, for example) directly to the DC (3PL) which distributes them subsequently to the stores.
    We do this with the two-step stock transfer (we create an STO, do the GI with movement type 351 and the DC does the GR whereupon we receive the data file via the interface and a program converts and creates an IDoc for GR with movement type 101).
    We get the error status of the inbound IDoc after the GR takes place at the DC. However, if we are to perform a manual GR with MIGO, it works.
    What goes wrong in this process?
    Thank you in advance for your valuable input!
    Regards,
    Miro

    Hi,
    Do refer the below KBA , which explains you that transaction MIGO allows you enter multiple purchase order with single goods receipt.
    Which is a std behavior of the system.
    KBA: 1612531 - MIGO allows multiple purchase orders for a single goods receipt

  • Workarounds for 2.0.1 app install crashes

    Hi All,
    This will be a long post, but hopefully of help to those suffering from the infuriating application related crashes and instability of 2.0 and 2.0.1.
    For those just looking for the workarounds, jump to the bottom of this message. For those interested in a technical discussion of what's going on behind the scenes, keep reading.
    After running a very stable iPod Touch on 1.1.3 for quite some time complete with jailbroken apps, I decided it was time to give 2.0 and the official third party apps a go.
    At first I loved the new features especially the WPA Enterprise support and MS Exchange support which I think are brilliant, but then I started to notice all kinds of problems with crashes like most other people in this forum as soon as I had a few apps installed.
    Basically the thing was horribly unstable to the point of being unusable, and I did about 10 full restores in the first two weeks, just to keep the thing going, and experienced dozens of cases of being stuck on the apple boot screen.
    The crashes could be narrowed down into two types of crashes - one is crashes while trying to RUN applications, and the second is crashes trying to INSTALL or UN-INSTALL applications.
    The first type - crashes while running applications would take the form of either an app crashing back to the home screen when launched, or causing a total system freeze or a spontaneous reboot either when launching an app, or sometimes while running an app.
    Usually when this would happen most large apps (hint: memory hungry apps) would fail to launch, good examples are super monkey ball, cromag rally and enigmo. Repeated attempts to launch these apps would fail and eventually the device would spontaneously reboot.
    In all cases, a full reboot of the device, (hold sleep button for 5 seconds, swipe to power off, then power on again) would allow the app to run again. The reviews of some apps on the app store are littered with complaints from people that the app crashes during launch - the irony is the app is NOT to blame, in all cases I have seen.
    The second type of crash is a lockup and/or spontaneous reboot during app installation or removal either through the built in appstore application or via syncing with itunes. More often than not this type of crash would render the device unbootable with you stuck at the apple logo - you could tell this was happening because after a few minutes the apple logo would go darker, and the device is no longer pingable over wifi.
    First the good news - for me anyway, 2.0.1 FIXES the first type of crash - apps crashing back to the home screen, spontaneous reboots and lockups when launching apps or using them. I haven't had super monkey ball fail to launch, or crash during play a single time since updating to 2.0.1 for example. Wahoo Apple.
    When not adding/removing/updating applications, I now find 2.0.1 to be quite stable, apart from the usual Safari crashes, which seem to happen a bit more often than 1.1.3.
    Now the bad news - the app install / un-install related crashes are NOT fixed in 2.0.1 or even alleviated, so these are what I will focus on in this message describing workarounds I have found and the reasoning behind them.
    Ok here's the deal, with a bit of analysis the root cause of the problem is LOW MEMORY conditions that occur during the app install / un-install process. It seems to be a combination of increased system memory requirements of the 2.0 firmware in general (there is simply more stuff running than there was in 1.1.x, so there is less free memory) as well as what look like memory leaks (or at least poor coding) in both Springboard and mobileinstallationproxy. More on those in a minute.
    In addition the emergency low memory handling of the system (maybe the kernel) seems to be broken in 2.0.x - once free memory gets below a certain point the system will hard freeze - this never happened in 1.1.x, at most it would cause a reboot if memory became critical and nothing could be done to free memory.
    Ok, what is mobileinstallationproxy ? This is a program whose job it is to install and uninstall applications, basically, and did not exist in 1.1.x firmware. When an application is to be installed or removed either directly on the device or by syncing with itunes, this is the process that is launched to do it.
    Problem number one - sometimes, this processes memory usage will grow enormously - there is typically only 60MB ram free no additional apps are running and background mailcheck is disabled. mobileinstallationproxy's memory usage will often climb to reach or exceed this amount causing an extreme low memory condition which will cause the Springboard to try to kill off unnecessary processes, but if it can't find enough memory the device will either freeze or spontaneously reboot - the reboot in the middle of application install / un-install corrupts the application state, causing more trouble later on.
    Ok, what is Springboard ? This is the main application on an ipod touch / iphone which gives you your home screen, and manages the launching of applications, provides touchscreen input to applications, and also does additional memory management by asking applications to reduce their memory usage if free memory is tight, and will even go so far as to quit background processes to free up memory when memory gets really tight.
    Problem number two - sometimes Springboard starts allocating large amounts (over 70-80MB) of memory itself causing a low memory condition - and it cant free up memory because it can't ask itself to quit! At least, not without rendering the device unusable, because you lose the ability to use the touchscreen......
    This typically happens when Springboard is "regenerating the application map" which basically means it is looking at newly installed applications to find out details about them and display them on the home screen. This regenerating happens both immediately after application install, and during bootup (before the lock screen) if it wasn't previously finished. BIG PROBLEM.
    What happens if the device crashes if you are half way through installing an app ? The answer is that when you try to boot up again Springboard starts regenerating the application map before you are presented with the lock screen - it looks like nothing is happening, but it is. Corrupt applications can cause Springboard to crash during this phase which means you are stuck in an INFINITE LOOP of rebooting showing the Apple logo, which is what many people have experienced.
    Problem number 3 - if you have a LOT of applications installed, and just one of them gets corrupted during a crash, when the device reboots, Springboard will start rebuilding the application maps, but this can take a LONG time, and there is a TIME LIMIT on how long Springboard is allowed to run in this state! A watchdog process waits for Springboard to respond during bootup but because Springboard is busy regenerating the application map it doesn't respond. If it doesn't respond in a certain amount of time (approx 5 minutes) the watchdog will KILL Springboard, thus not only preventing it from finishing the job and letting you get to the lock screen, but possibly further corrupting data, and causing the device to freeze, as Springboard is an essential system process.
    This is the reason why the system becomes prone to getting stuck on the Apple screen after just a single application becomes corrupted, if you have MORE than a certain number of applications installed. If you have few applications installed (less than approx 10) the situation of one app becoming corrupted is recoverable, and self healing, if you have many applications installed (over 20) there is never enough time for Springboard to finish the job before the watchdog terminates it - thus being stuck at the Apple Logo with no escape other than a system restore.
    For anyone who wonders how I am gathering the data to form these conclusions there are two tools that I've used - one is freely available from Apple, and that is the 'iPhone Configuration Utility' available from here:
    http://www.apple.com/downloads/macosx/apple/application_updates/iphoneconfigurat ionutility10formacosx.html
    Which has the ability to show the local system log (console) of the device in real time, showing things such as:
    Sat Aug 9 20:54:28 unknown configd[15] <Notice>: kernel memory event (93), free: 376, active: 1179, inactive: 770, purgeable: 0, wired: 5400
    Sat Aug 9 20:54:30 unknown configd[15] <Notice>: kernel memory event (90), free: 376, active: 1398, inactive: 788, purgeable: 0, wired: 5417
    Sat Aug 9 20:54:32 unknown SpringBoard[16] <Warning>: Memory level is urgent (10), but there are no apps to warn!
    Sat Aug 9 20:54:33 unknown configd[15] <Notice>: kernel memory event (90), free: 376, active: 1455, inactive: 1204, purgeable: 0, wired: 5419
    Sat Aug 9 20:54:33 unknown SpringBoard[16] <Warning>: Memory level is urgent (10), but there are no apps to warn!
    A great deal of information about what is going on can be gained from watching this log file, and the program can be left monitoring even during an itunes sync.
    The second way I have gathered data is by running top over ssh on a jailbroken version of the firmware. I don't endorse or encourage jailbreaking of firmware, but in this instance it has allowed me to gather invaluable data on the problem, and I would stress that the crashes that I've been chasing occur equally on standard and jailbroken firmware.
    In particular ssh has allowed me to prove one hypothesis - when the device gets stuck at the Apple logo after an app is corrupted, and is in an unrecoverable state that requires yet another restore, if I quickly ssh in as soon as I can during the bootup phase, and delete all the Appstore applications from /var/mobile/Applications the device will almost immediately spring to life and has been "saved" from requiring another restore - this proves that Springboard is getting bogged down scanning the applications and once they are removed it will boot normally again and the apps can be reinstalled.
    WORKAROUNDS AND RECOMMENDATIONS
    The biggest problems here are (a) too many apps installed preventing bootup recovery once an app gets corrupted, and (b) low memory situations being encountered during app install / uninstall causing the corruption in the first place.
    1) Don't install or update Apps using the built in Appstore application on the ipod/iphone. For reasons not entirely clear this is a very hit and miss proposition and there is a VERY high chance that you will get a freeze or a crash from doing this if you have more than a few apps installed, and end up in an unrecoverable state. Just don't do it, always sync apps across from itunes.
    2) Free up as much memory as possible BEFORE syncing applications with itunes, and this applies both to installing and un-installing applications. The best way to do this is disable MobileMail from running in the background. If you have automatic message checking of any kind enabled MobileMail launches at bootup and runs in the background ALL the time, consuming approximately 14MB of ram, and this is often the straw that broke the camels back when memory gets tight.
    To do so, disable PUSH, and change Fetch new Data to Manually, then either do a full reboot (sleep button for 5 seconds then swipe to turn off, then press to turn on again) OR launch mobile mail, wait for it's mail check to finish, then hold down the home button for 5 seconds to do a forced quit. It's imperative that automatic checking of mail is disabled, or it will immediately launch in the background again.
    This step of disabling MobileMail to free up a bit more memory makes the most difference of all the things I have tried in preventing crashes during application syncing, so don't skimp. You can enable automatic mail checking again afterwards.
    3) As much as it pains me to say, having downloaded over 30+ apps, if you want your ipod/iphone to be stable, until Apple fixes this issue, install as few apps as you possibly can - just the ones you really need, and not lots of gimmicky things you don't really need. Try to keep it under 20 at any one time, and you can do this on the Application tab in iTunes telling it to sync only selected applications. Keeping the number of synced applications down to a minimum makes a big difference, and means that even if you do get a crash during app installation it will usually recover. If you have lots of apps installed it will NOT recover by itself.
    Good luck all, and roll on 2.0.2.

    If you DO get in the situation where the iPhone won't load and is stuck at the Apple logo, there is an alternative to Restoring: renaming the Applications folder momentarily.
    Of course this assumes you have a way of getting to the Applications folder before the phone has fully booted. I am lucky as I have OpenSSH installed and when this crash occurs the WiFi has already connected, so I can (for example) log in and rename Applications to Applications2 and then back again.
    The Springboard will start about 5 seconds after you rename the folder. This at least gives you an opportunity to back stuff up or try to remove the offending application instead of restoring.
    I have heard that you can use iPhoneBrowser on Windows to do the same but not tested this.

  • "Adobe has found a solution or workaround for the recent crash in Adobe Flash CC" ...not really.

    Hi guys,
    My Flash CC crashes all the time, it's always been doing it since when I started using it on CS4, and I've somewhat given up on this bug being fixed, it crashes at least 20-30 times every document I create. I'm using a Wacom Bamboo Fun Pen&Touch tablet and drawing a lot, I think the problem is that it can't handle this much drawing.
    Anyways, it just crashed and for the first time after reopening I found this nice message from Flash:
    "Adobe has found a solution or workaround for the recent crash in Adobe Flash CC.
    Please click here for further details."
    Excited, I clicked on it! At last, a solution! Amazing!
    ...but it just points to http://www.adobe.com/
    ... I don't understand.
    What's happening? I'm genuinely puzzled.
    Also, anybody else experiencing frequent crashes?
    Thanks!
    Ciao!

    Yes, this is not good -- you're already mad when it crashes, then "We found a solution!" But, for me clicking on the link does nothing - no link even to adobe, just a tease - nothing opens.
    It's bad enough crashing a couple times a day and losing work (I do save every chance I get), but then to get taunted with this bogus message, it's discouraging and exactly the best 'user experience' for a really expensive product from company that is all about helping professionals create good design/user experience ..
    I like the way this is headed though! it just doesn't work right now.

  • Solution - Workaround for latest NIC's not loading

    hey all,
    have discovered (with the help of a friend) a workaround for getting new
    NIC's working with the ZENworks Imaging boot cd.
    have tried posting the solution to coolsolutions but nothing seems to be
    happening so thought i would post a message here.
    basically a method on manually loading the NIC module and allowing you
    to image up or down to a server.
    it's not a solution in my mind as you still require manual intervention
    but it will at least buy some time while you wait for a newer bootcd.iso
    to come out.
    process is a bit big for here, but please email me if you would like a
    look and i would be happy to email it through.
    and if it works for you, maybe leave a message to let others know if it
    was useful/not so useful.
    regards,
    Leon Hewitt <[email protected]>
    Curtin University of Technology

    Leon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Need the good documents for AlV

    Hi,
    I am new to Alvs. Plz send me good documents for same. In this AlV pgm how to activate filter button?
    type-pools: slis.
    DATA: it_spfli TYPE TABLE OF spfli ,
          it_cat TYPE SLIS_T_FIELDCAT_ALV,
          wa_cat TYPE slis_fieldcat_alv,
          checkbox(1)    type c.
    data: itab1 type  SLIS_T_SORTINFO_ALV ,
          WA TYPE SLIS_SORTINFO_ALV.
    *data: itab2 type  SLIS_T_SORTINFO_ALV ,
         WA1 TYPE SLIS_SORTINFO_ALV.
          START-OF-SELECTION.
    SELECT * FROM spfli  INTO TABLE it_spfli.
    IF it_cat is initial.
      clear wa_cat.
    wa_cat-col_pos   = 1.
    wa_cat-fieldname = 'CARRID'.
    wa_cat-datatype  = 'CHAR'.
    wa_cat-inttype   = 'C'.
    wa_cat-intlen    = 3.
    wa_cat-seltext_l   = 'Airline Code'.
    append wa_cat to it_cat.
    clear wa_cat.
    wa_cat-col_pos   = 2.
    wa_cat-fieldname = 'CONNID'.
    wa_cat-datatype  = 'NUMC'.
    wa_cat-inttype   = 'N'.
    wa_cat-intlen    = 4.
    wa_cat-seltext_l   = 'Flight conn no'.
    append wa_cat to it_cat.
    WA-FIELDNAME = 'CARRID'.
    WA-UP = 'X'.
    APPEND WA TO ITAB1.
    *ENDIF.
    CLEAR WA.
    CLEAR ITAB1.
    WA-FIELDNAME = 'CONNID'.
    WA-UP = 'X'.
    APPEND WA TO ITAB1.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
       I_INTERFACE_CHECK              = ' '
       I_BYPASSING_BUFFER             =
       I_BUFFER_ACTIVE                = ' '
       I_CALLBACK_PROGRAM             = ' '
       I_CALLBACK_PF_STATUS_SET       = ' '
       I_CALLBACK_USER_COMMAND        = ' '
       I_STRUCTURE_NAME               =
       IS_LAYOUT                      =
        IT_FIELDCAT                    = it_cat
       IT_EXCLUDING                   =
       IT_SPECIAL_GROUPS              =
        IT_SORT                        = ITAB1
       IT_FILTER                      =
       IS_SEL_HIDE                    =
       I_DEFAULT                      = 'X'
       I_SAVE                         = ' '
       IS_VARIANT                     =
       IT_EVENTS                      =
       IT_EVENT_EXIT                  =
       IS_PRINT                       =
       IS_REPREP_ID                   =
       I_SCREEN_START_COLUMN          = 0
       I_SCREEN_START_LINE            = 0
       I_SCREEN_END_COLUMN            = 0
       I_SCREEN_END_LINE              = 0
       IR_SALV_LIST_ADAPTER           =
       IT_EXCEPT_QINFO                =
       I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
    IMPORTING
       E_EXIT_CAUSED_BY_CALLER        =
       ES_EXIT_CAUSED_BY_USER         =
       TABLES
         T_OUTTAB                       = it_spfli.
    EXCEPTIONS
       PROGRAM_ERROR                  = 1
       OTHERS                         = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

    REPORT zazualvgrid .
    DATA: grid1 TYPE REF TO cl_gui_alv_grid,
    ok_code LIKE sy-ucomm,
    mycontainer TYPE scrfname VALUE 'CUST',
    container TYPE REF TO cl_gui_custom_container.
    DATA : t_ekpo TYPE TABLE OF zekpo.
    DATA : v_save,
    v_repid LIKE sy-repid,
    v_variant TYPE disvariant.
    INCLUDE zsta.
    INCLUDE zpbo.
    START-OF-SELECTION.
    PERFORM set_data.
    END-OF-SELECTION.
    CLEAR v_variant.
    v_repid = sy-repid .
    v_variant-report = v_repid.
    v_save = 'A'.
    CALL SCREEN 786.
    FORM CREATE_CON *
    FORM create_con.
    IF container IS INITIAL.
    CREATE OBJECT container EXPORTING
    container_name = mycontainer
    EXCEPTIONS
    cntl_error = 1
    cntl_system_error = 2
    create_error = 3
    lifetime_error = 4
    lifetime_dynpro_dynpro_link = 5.
    IF sy-subrc NE 0.
    CALL FUNCTION 'POPUP_TO_INFORM'
    EXPORTING
    titel = sy-repid
    txt2 = sy-subrc
    txt1 = 'The control could not be created'(510).
    TXT3 = ' '
    TXT4 = ' '
    ENDIF.
    CREATE OBJECT grid1 EXPORTING
    i_parent = container.
    CALL METHOD grid1->set_table_for_first_display
    EXPORTING i_structure_name = 'ZEKPO'
    is_variant = v_variant
    i_save = v_save
    i_default = 'X'
    CHANGING it_outtab = T_EKPO.
    ENDIF.
    ENDFORM. "
    FORM SET_DATA *
    FORM set_data.
    SELECT EBELN EBELP MATNR BUKRS STATU
    FROM EKPO INTO TABLE t_EKPO UP TO 20 ROWS.
    ENDFORM. " GET_DATA
    module USER_COMMAND_0786 input.
    CASE OK_CODE.
    WHEN 'EXIT' or 'BACK'.
    CALL METHOD container->free.
    LEAVE TO SCREEN 0.
    ENDCASE.
    CLEAR OK_CODE.
    endmodule. " USER_COMMAND_0786 INPUT
    module STATUS_0786 output.
    SET PF-STATUS 'ZAZUALVGRID'.
    SET TITLEBAR 'GRID_DISPLAY'.
    PERFORM CREATE_CON.
    endmodule. " STATUS_0786 OUTPut
    Regards,
    Azhar

  • Workaround for the Fade/Appear blocky text problem in IE

    Just wanted to share with folks a workaround for the IE
    "blocky text" problem that you see when using Fade effects like the
    one used in this example:
    http://labs.adobe.com/technologies/spry/samples/data_region/DetailRegionEffectsSample.html
    It turns out if you set the 'background' CSS property on the
    element you are fading, that IE properly renders the text. So to
    fix the effects sample above, all you would have to do is modify
    this CSS rule in the file to place a background color on the
    description region to get things to look good in IE:
    #description {
    opacity: 0;
    filter: alpha(opacity=0);
    background: white;
    So if folks have been avoiding the use of effects because it
    makes things look terrible in IE, you now have a workaround.
    --== Kin ==--

    I was using spry's AppearFade effect to transition between
    "slides" in what equates to a viewstack that I created.
    Then I noticed that it would take bold text in IE and make it
    look all smudgy or blurry.
    Well, after working on it for a while, I got to thinking,
    "This problem is specific to text rendered in MicroSofts
    browser"... "Hmmm, I wonder".
    So, I tried using this style rule: [ font-family:"MS Sans
    Serif",Arial, Geneva, sans-serif; ].
    Lo and behold, feed the stupid MS browser an MS font and it
    does not blur the text.
    I just wanted to get this our there. Because someone might
    want to solve this in a way where they don't have to set a
    background color...

Maybe you are looking for