GoodReader iDisk sync error 404

I encountered an error when trying to sync an iDisk folder with my iPad GoodReader:
"Failed: Invalid server reponse: 404 not found."
After some search I found that similar error was reported on a DropBox forum and related to " ; " used in a filename. I hadn't had anything like this but there were " ? " question marks in my names. After deleting them, the sync was all fine.
So if you get this error, check the filenames for some unusual letters, rename files and try again.
Good luck

I found that it was the file name with a / in it.

Similar Messages

IDisk Sync Errors

Since installing Snow Leopard, I have two types of iDisk Sync Errors:
1) It says a file was modified on Mobile Me and also modified on My Computer. This is simply untrue. I never use Mobile Me.
2) It says the file cannot be synced because it is "in use" even when it is not in use and the application is actually closed.
I have used iDisk for 1 year before Snow Leopard and never experienced either of these problems.
Is there a solution?

G'day,
Have you tried the steps in this article:
http://support.apple.com/kb/TS1546
Cheers,
Rodney

Disappearing Webpages and iDisk syncing errors in Leopard

(1) I am having a problem that just started today. I installed Leopard on Oct. 29, I've had it for a couple of weeks. At first, I loved it, but new problems keep popping up every few days. I have an at-home business and I run Safari, Firefox and Safari Mail simultaneously to monitor two businesses. Safari hasn't been affected, so far, but Firefox and Mail will shut down spontaneously. It always happens after I leave my computer, so I don't know what actually happens. But when I come back all I have is my desktop but no webpages are open. The only way I can get them to re-open is to Restart the computer.
(2) Another problem that started last night is with iDisk sync. I get an error box stating that certain items were unable to sync. Always different items, but all are photos that are on iWeb or .Mac Homepage and have been there since Tiger. I have not changed or altered anything in my iDisk folders since installing Leopard.
The very first problem that I noticed after installing Leopard is that webpages are opening much more slowly than with Tiger. Evenings are always the slowest but it's never been as fast as Tiger. I'm on an ethernet cord, but that didn't speed things up at all from wireless.
Any help or fixes to these glitches will be much appreciated!
These are my browsers' stats and HD info.
Firefox v. 2.0.0.9
Safari Mail 3.0 (912.1/912)
Capacity: 232.44 GB
Available: 185.26 GB

Yep, I am getting this A LOT too. Hah! ..but not always. By one if those strange acts of synchronicity and after the 6th attempt and 3rd reboot this evening it just finished syncing whilst typing this message. Typical.
But it's been very temperamental and I have had it syncing for hours with no response after only changing a small file. Pretty frustrating - can't really rely on it anymore and am thinking of giving up on the stupid thing and going back to using a USB stick again.

IDisk syncing error driving me crazy!

Every time my iDisk syncs, it fails and I get an error message saying that a file can't be found. I know I deleted that file a few days ago. I looked on all my other computers and searched spotlight and can't find anything. I deleted some of the preferences related to syncing, and now because of this I can't sync my iDisk at all! I signed out and back into my mobile me account. I reset iSync and reset sync data in preferences.
Can anyone PLEASE HELP? Thanks.

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
or on Mac -
Library/Application Support/Macromedia/Dreamweaver
8/Configuration/MacFileCache-*.dat
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jmath_sf" <[email protected]> wrote in
message
news:ee9lvg$5k9$[email protected]..
> Help! I keep encountering the following error message
when trying to
> access the
> EDIT menu or right-clicking:
> At line 30 of file "Disk:Applications:Macromedia
Dreamweaver
> 8:Configuration:Menus:MM:Edit_Paste.js".
> Exception thrown in native function."
>
> Has anyone seen this? How can I deal with this??
>
> Thanks!
>

IDick Sync Error, with no info about problem!

I keep getting the following iDisk Sync Error on my MacBook Air but it doesn't give me any info to resolve -
" Your iDisk did not finish syncing because a problem occurred, please try again later."
My sync setting are set to sync automaticlly with my MobileMe account and the problem has been happening for 5 days without me being able to resolve. When I dismiss the messag eit keeps popping bavk up every 2/3 minutes
I am using OS X v10.7.2. Can anyone advise how to resolve?
Thanks
Sean

Just wanted to add:
Even when I just change the name of the voice memo in iTunes I get the unknown error -13019.
Name changes on the iPhone app are not reflected in iTunes (the still have the date/time stamp as a name there). But sync works.
When I change the name in iTunes too to match the name on the iPhone the sync is not working.

Publish Error and iDisk sync

I saw a previous post re an unknown error when trying to publish. I am getting the same error, even when trying to publish to a folder.
In the previous post, someone mentioned an iDisk sync solved the publishing problem. How is this done?

Okay, I launched iWeb, chose the first template offered ("Welcome"), made no changes, then selected File, Publish to .Mac. I got the same error: "An error occurred while publishing file "/Web/Sites/iWeb/Site", and there are no new folders in my iDisk. I then removed the default image, the Apple logo, and replaced the placeholder text with something short, and tried again. Same error.
The default name of the site (in the Site Organizer panel) is "Site" and the page is "Welcome".
More info. The "Visit" button generates this URL:
http://web.mac.com/[myDotMacName]/iWeb/Site
I tried File, Publish to a Folder..., and that seemed to work, but that's just a folder on my local machine.

Airport will not connect to Linksys router after iDisk sync force quit

Hi,
Hoping someone can help me here, kinda at my wits end.
A week ago I was video ichatting and restarted my MacBook because the video feed was sluggish. I thought a restart would help.
Unknown to me was that my iDisk was syncing. I recieved an warning dialogue box and was given the option of canceling the restart or force quitting the iDisk sync. I choose to force quit and proceed with the restart. After choosing to continue with the force quit I received an error message, it had the phrase "Mirror Agent" in it, and then my MacPro restarted.
Since that first restart, I have not been able to connect, using Airport, to my Linksys Wireless router (model # WRT54 GX4).
This is where it gets strange. Airport sees the router, displays a signal strength, shows up on my list of perfered networks...it displays all of the signs of a fully connected router but when I try to access the web, check mail or use iChat I cannot because Safari, Mail and iChat tell me that I am not connected to the internet.
When I ran the network dianogistic tool, it first asked me why I would want to run it because it thought I was already connected. After running the tool it still came back with the same results, I was connect to the internet. But I still couldn't launch Safari, it just hung.
This is where it gets really wierd. My wife, she's on a HP, can connect, using her built-in wireless card. Even after changing the Firmware on the Linksys router, her pc can still connect.
And here's the icing on the cake. There are some unprotected wireless networks on my street. I can connected to those but not my own! Something has to be blocking the signal between my AirPort card and the Linksys router. Does that make sense?
And if there is one saving grace to all of this, I still can connect to the web using the built-in Ethernet.
Here's what I have tried:
Removed Perfered Network, restarted MAC, added network back, still no connectivity.
Removed security (was using WPA/WPA2) from the router still no connectivity.
Removed Airport Keychain, restarted MAC, added router back, still no connectivity.
Repaired the permissions on my HD, someone at work told me to try that, still no connectivity.
Updated firmware to Linksys router to version 1.00.20, no connectivity.
Rebooted Linksys router and cable modem, still no connectivity.
Thank you to all in advance for reading my rambling note and forgiving my poor spelling (it is way past my bedtime and the keys are really blurry). I am still very new to Mac's and appreiciate any help that you can provide.
Cheers,
Alan
[email protected]

Sounds like you have two wireless networks on the same channel.
Change the channel on the Airport Express.
iFelix

.Mac iDisk syncing preventing reliable Restarts/Shut Downs in Leopard

I have been experiencing a Restart/Shut Down reliability issue with my new iMac and Leopard 10.5.1. This evening an Apple rep I know pointed me to a work-around in Apple Discussions:
http://discussions.apple.com/thread.jspa?messageID=5957261&#5957261
This thread notes the discovery by one user that iDisk automatic syncing is not working reliably, and is preventing consistent restarting/shutting down of your Mac. Although, syncing has been working reliably for me both for .Mac stuff, and the iDisk itself, if you do a Get Info on your iDisk it reports, at least for me, that its capacity is 1TB, with 466GB available. I have only the standard 10GB .Mac account, and only 5GB of that is allocated to my iDisk, so something is clearly amiss with the .Mac iDisk setup, as being reported from the .Mac server. If you check your Console logs, you may also see this recurring error message, which is reporting a syncing error, although my syncs have, as I've said, been working correctly:
11/25/07 9:11 PM FileSyncAgent192 MKCOL /.FileSync (FAILED), httpStatusCode:405, errorType:100, transactionState:5, txnId:3846B904-9ABB-40E5-9928-B9233FAC05D2, auto-retries=0, manual-retries=0
To summarize, if you turn off automatic iDisk syncing in your System Preferences/.Mac/iDisk preference pane, you'll have no problems restarting/shutting down. You may also need to do the power management reset (turn off Mac, unplug all devices and power for 15 seconds, reconnect, and start up) and the parameter RAM reset (reboot while holding down the cmd-opt-P-R keys). You can do this in one restart cycle, if you like. After that, restarts/shutting down has worked perfectly for me.
Of course, I actually USE my iDisk, and will be leaving it on. But, at least I know now how to work around the restart/shut down issue.
I hope Apple adds this fix to their 10.5.2 update next month.
Note: This is such an important issue, that in addition to adding it to a reply in another Shut Down thread, I thought I'd post it as a separate topic here.

MacOS X updates have resolved this issue.

Addressbook sync error message in console

Hello all,
I've seen a couple of (non-answered) threads about addressbook sync issues here, but my question is, I guess, easier to answer.
The following message keeps coming up in my console:
AddressBookSync[91]: AddressBookSync (client id: com.apple.AddressBook) error: Exception running AddressBookSync: * -[NSPlaceholderString initWithUTF8String:]: NULL cString
com.apple.launchd[63] ([0x0-0xb00b].com.apple.AddressBook.sync[91]): Exited with exit code: 2
I don't even really want to know what the problem is.
But, does anybody know how I can just alltogether stop these syncing processes?
I stopped syncing in: Apples' mobileme preference pane, iSync & Addressbook. I'm not using a mobileme account on that computer (Mail or elsewhere).
So why is this process running?
Thanks for reading me.
Cheers,
TimeLawD.

Hello timelawd
I stopped syncing in: Apples' mobileme preference pane, iSync & Addressbook. I'm not using a mobileme account on that computer (Mail or elsewhere).
So why is this process running?
This Address Book Sync Error drove me nuts. I use MobileMe but I didn't tell it sync any thing nor do I Sync iDisk. I even turned off Back to My Mac. But every hour that error would hit the log. Great.
So I looked at MobileMe Preferences again and noticed that I had 'Registered this Computer' using the 'Advanced...' button under 'Sync'. Hmm, maybe that's it. Yep. I un-registered my Mac and the error when bye-bye.
See if you have your Mac registered there.
Good Luck.
Buzz

IDisk Sync Issues

A couple problems which I can solve:
- iDisk on Desktop has my username listed instead of 'iDisk'. In sidebar it still says 'iDisk')
- iDisk on Desktop reports incorrect size (out by huge orders of magnitude).
- some files on my own iDisk can't be deleted as I don't 'have permission' (eg. 'About your iDisk.rtf')
I've:
- reset .Mac syncing
- reset iDisk syncing (same problems)
- checked the hard disk and permissions (all OK)
- the permission on the problem files should allow me FULL access, yet it gives these errors...
Please sort out this stuff, Apple...
Thanks,
Paul Martin

A disclaimer: I don't use iDisk myself.
But WebDAV is a Web Publishing protocol. Web Distributed Authoring and Versioning.
I'm under the impression that it's what is used for iWeb publishing on .mac, I suppose that it could also be used for iDisk as well. It requires authentication to publish, usually. If they've horked something up on their end and you're unable to authenticate or your network connection isn't good, this could cause problems with that. If it uses your keychain to authenticate, and uses SSL, which I would assume that it does, I have some ideas.
I was having problems connecting to SSL sites at *.apple.com and other places since 10.5.0, the solution in this discussion: [http://discussions.apple.com/thread.jspa?threadID=1272177]. Based on your problem and this solution, I'm going to guess that you're on DSL, that WebDAV is what iDisk is based on, using SSL to communicate with iDisk for at least authentication, and likely moving files back and forth as well. That's a lot of guessing, and I may be wrong in any one or more places.
Most of my problems have been cleared up by this. Changing the MTU on the ethernet connection that gets you out to the internet isn't the favored solution, and may disappear if your computer sleeps and wakes back up or reboot (if you haven't hacked some system files to reinitialize this setting).

Annoying Sync error - Please help

Once in a while, I get a dialogue box that says that there was an error during syncing because a file was missing. That's because I deleted it. It sounds like a preference issue. Which preference can I delete, or should I do something else? I have 3 computers syncing with Mobileme with iDisk syncing enabled. Thanks.

Hi again, Elena,
Have you tried fully reinstalling iTunes?
Start out by disconnecting your iPod from your computer, and going to "Add or Remove programs" in Control Panel.
Find "QuickTime" and "iTunes" from this list, and remove them both.
Also, use the Windows Installer Cleanup Utility to remove remaining iTunes and QuickTime files off your computer. (A description of it is here)
After you've done that, restart your computer.
Now go to the iTunes download page, and install the iTunes+QuickTime pack onto your computer.
Restart your computer once more.
After the computer has fully loaded up, open iTunes, and connect your iPod to your computer.
-Kylene

Using AppleScript to kick off an iDisk 'sync-now'

I'm using my iDisk to synchronize project work between my MacBook Pro and my Mac Pro.
Unfortunately, I get problems when syncing my iDisk as some files throw up errors due to 'symlinks'. It's not too much trouble as the files at fault are only temporary and can be deleted before syncing.
To get around the problem, I decided to switch to manual iDisk syncing & write an AppleScript to simply delete a few folders and kick off a sync.
The record command in the Script Editor doesn't seem to recognize the 'sync' command. Does anyone know if it can potentially be triggered?
So to cut a long story short; 'How do I trigger an iDisk sync via AppleScript'?
Thanks in advance!

No, it doesn't have to be an exe... but you have to actually run java.exe just like on the command line.
You can kill it if you hold onto the Process object it returns. Read the API docs for java.lang.Runtime and java.lang.Process

[SOLVED] error 404 in package downloads

i tried to install firefox, opera, pm-utils,polkit-gnome gvfs.
while installation i am getting this errors as mentioned below and nothing got installed and everything is pending hence.
1.for firefox 2 packages were not downloaded and no install happened
2.opera not at all downloading
3.pm utils the same like opera
4.for polkit-gnome gvfs a few missing and thus again pending work.
I am trying from yesterday and also did today, i am getting the same results.
here is a snippet of one of the error .
sudo pacman -S firefox
resolving dependencies...
looking for inter-conflicts...
Targets (9): hunspell-1.3.2-1 libevent-2.0.19-1 libnotify-0.7.5-1
libvpx-1.1.0-1 mime-types-8-1 mozilla-common-1.4-3 nspr-4.9.1-1
nss-3.13.5-1 firefox-14.0.1-1
Total Download Size: 0.22 MiB
Total Installed Size: 49.99 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
error: failed retrieving file 'nspr-4.9.1-1-x86_64.pkg.tar.xz' from archlinux.polymorf.fr : The requested URL returned error: 404
error: failed retrieving file 'nspr-4.9.1-1-x86_64.pkg.tar.xz' from mirror.de.leaseweb.net : The requested URL returned error: 404
error: failed retrieving file 'nspr-4.9.1-1-x86_64.pkg.tar.xz' from mirror.nl.leaseweb.net : The requested URL returned error: 404
error: failed retrieving file 'nspr-4.9.1-1-x86_64.pkg.tar.xz' from mirror.rit.edu : The requested URL returned error: 404
warning: failed to retrieve some files from extra
error: failed to commit transaction (download library error)
Errors occurred, no packages were upgraded.
I am just putting one error message as it is same for the rest of all other packages. You see as above in firefox one package is pending, balance got downloaded yesterday. Similar happened in polkit-gnome gvfs . Whereas for opera and pm-utils upower nothing got downloaded at all.
In all the 4 cases i got the same error with no downloads or partial downloads .
Now these mirrors have been fast and best for me uptil now and no issue with them.
So basically what these error is and what i should do about the same to complete the installation.
Last edited by beopen (2012-08-12 10:20:37)

WonderWoofy wrote:
Have you done pacman -Sy lately? It may be that your database is not in sync with the mirrors, so it is trying to retrieve package versions that aren't there.
Edit: I was too slow...
i have done the pacman -Syu just a week back and everything is uptodate.
@tomk
Short answer: pacman -Syu, not pacman -S.
Secondly do you install firefox or any other package with pacman -Syu firefox or pacman -S [packagename] ????
i have atleast so far installed everrything with pacman -S packagename
this is what the pacman wiki says
Installing specific packages
To install a single package or list of packages (including dependencies), issue the following command:
# pacman -S package_name1 package_name2 ...
lastly i solved the problem and the installation went right by unchecking a few more mirrors and the same went alright now.
So for the moment i am labelling the query as solved.
Thanks.

"Error 404: file not found"displayed when trying to run a process on server

Iam trying to run a "weblogic integration-process application" on server to test the application. Iam using weblogic workshop 9.2.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
Tutorial_Process_Application_Web</display-name>
<listener>
<listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
<display-name>
Tutorial_Process_Application_Ear</display-name>
<module id="WebModule_1180909671484">
<web>
<web-uri>Tutorial_Process_Application_Web.war</web-uri>
<context-root>Tutorial_Process_Application_Web</context-root>
</web>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
</module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
Edited by gvishu at 06/04/2007 9:39 AM

sorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu

Error 404 -- Not Found, when a Servlet is invoked from browser

Obviously, I have not been able to configure my WebLogic Server 5.1.0 to run
          even the simplest servlet.
          I painstakenly went through all the steps that are listed in the WebLogic
          Server 5.1.0 documentation on the Web to enable servlets, but obviously, I
          have missed a step somewhere.
          I have modified the weblogic.properties file as per all the instrustions,
          but the server simply won't recognize any servlets, not even the SqlServlet
          that came with the server as an example.
          It would require more than 1 exchange of posts to resolve it for me, and I
          am wondering if one of you is willing to work with me on this until I have
          managed to configure the server to make a servlet work on it.
          The server does function as a Web server as I can run the index.html
          document by entering the URL: http://localhost:7001/index.html
          I am pasting the contents of weblogic.properties file below to get the
          person who is willing to help me started.
          The machine I have is a Pentium III with Windows 2000 Professional on it.
          It's a home machine and the WebLogic server is the freely downloadable
          version. I am using it to prepare for a potential contract work.
          I have managed to modify setEnv.cmd file and have managed to compile the
          SqlServlet.java, which is an example servlet. Neither this particular
          servlet nor a HelloWorld type of very basic servlet I have written are
          recognized by the server.
          As you can see from my weblogic.properties file (pasted at the end of this
          post), the SqlServlet has been registered. I have also uncommented the lines
          to allow for the following type of URL:
          http://localhost:7001/servlet/myServlet
          Thanks!
          Anjum Jaleel
          CONTENTS OF MY weblogic.properties file
          # THE WEBLOGIC PROPERTIES FILE
          # This file, which conforms to the java.util.Properties file
          # definition, configures your WebLogic products. You cannot run
          # WebLogic Server without setting required configuration properties in this
          # file. Required properties are marked and appear first in the file.
          # Details on each entry and important information about configuration
          # and security are documented on our website. Please go to:
          # http://www.weblogic.com/docs51/admindocs/properties.html
          # for full instructions on how to edit this file.
          # You do not need to include properties in this file unless you want to
          # change the default, embedded property. Some properties on the
          # AdminProps page are not listed here because the default property
          # is being used. You can change the default by adding the property and
          # its value to this file.
          # You cannot set weblogic.system.home in this file, since the WebLogic
          Server
          # must know where home is in order to retrieve this file. You can
          # change WebLogic home on the command line when you start the
          # WebLogic Server.
          # CLUSTER USERS: Note that the (shared) per-cluster properties file should
          # contain most all of the properties in this file. The only properties
          # that potentially belong in a per-server properties file for a server
          # running in a cluster are the registration (startup class) of pinned
          # RMI objects, and a few tuning properties that may be different for
          # servers in the cluster, depending upon hardware and memory. If you use
          # a per-server properties file, please REMOVE all properties except those
          # that are specifically required in the per-server properties file. You
          # can find specific notes on clusters by searching through this file for
          # "CLUSTER USERS".
          # The way this file is organized:
          # Core properties (includes REQUIRED and RECOMMENDED)
          # Core system properties
          # Core security-related properties
          # Core security-related properties for SSL
          # Core HTTPD administrative properties
          # Optional properties
          # Administrator properties
          # System properties
          # System startup files
          # System shutdown files
          # Security-related properties for Workspaces
          # Jolt for WebLogic properties
          # WebLogic Enterprise Connectivity properties
          # WebLogic File properties
          # WebLogic JMS demo properties
          # WebLogic RMI demo properties
          # WebLogic EJB demo properties
          # WebLogic XML demo properties
          # WebLogic ZAC demo properties
          # HTTPD administrative properties
          # WebLogic JDBC driver properties
          # WebLogic JDBC connection pool management
          # WebLogic demo connection pool
          # WebLogic HTTP Servlet properties
          # Proxy servlet registration
          # Classpath servlet registration
          # File servlet registration
          # ServerSideInclude servlet registration
          # PageCompileServlet (used by JHTML)
          # JSPServlet (used by JSP)
          # ServletServlet registration
          # Servlet reload properties
          # Servlet ACLs
          # WebLogic JSP properties
          # WebLogic JHTML properties
          # WebLogic RMI over IIOP properties
          # User-written and demo servlet registrations
          # CORE PROPERTIES
          # You should set these before you start the WebLogic Server the first time.
          # If you need more instructions on individual properties in this
          # section, check the same section in the Optional Properties, where
          # we've left the long explanations. Or, better yet, go to our
          # website and read all about properties, at:
          # http://www.weblogic.com/docs51/admindocs/properties.html
          # CORE SYSTEM PROPERTIES
          # TCP/IP port number at which the WebLogic Server listens for connections
          weblogic.system.listenPort=7001
          # CORE SECURITY-RELATED PROPERTIES
          # Read important information about security at:
          # http://www.weblogic.com/docs51/admindocs/properties.html
          # REQUIRED: The system password MUST be set in order to start the
          # WebLogic Server. This password is case-sensitive, at least 8 characters.
          # The username for the privileged user is ALWAYS "system".
          # This username and password also includes httpd access (see
          # HTTPD properties below).
          weblogic.password.system=lovkako1
          # RECOMMEND Set to 'everyone' if HTTPD is enabled
          weblogic.allow.execute.weblogic.servlet=everyone
          # Set individual ACLs to restrict access to HTTP-related resources,
          # such as the Administration servlets.
          # To make your own servlets generally available, follow this
          # pattern (provide a weblogic.allow.execute) for your packages and
          # set ACLs as appropriate.
          # CORE SECURITY-RELATED PROPERTIES FOR SSL
          # Read important information about SSL at:
          # http://www.weblogic.com/docs51/classdocs/API_secure.html
          # Enable SSL
          # (default if property not defined is false)
          weblogic.security.ssl.enable=true
          # SSL listen port
          weblogic.system.SSLListenPort=7002
          # Servlets for SSL
          # Authentication servlet for creating tokens for applets
          weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
          ervlet
          # Limits number of unclaimed stored tokens
          weblogic.security.certificateCacheSize=3
          # Capture CA root of client servlet
          weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
          # Certificates for SSL
          # Name of acceptable CA roots
          # For client authentication change value to a valid .pem file
          #weblogic.security.clientRootCA=SecureServerCA.pem
          # Server certificates for SSL
          weblogic.security.certificate.server=democert.pem
          weblogic.security.key.server=demokey.pem
          weblogic.security.certificate.authority=ca.pem
          # registration for certificate generator servlet
          weblogic.httpd.register.Certificate=utils.certificate
          weblogic.allow.execute.weblogic.servlet.Certificate=system
          # CORE HTTPD ADMINISTRATIVE PROPERTIES
          # True permits the HTTPD to run (default)
          # Uncomment this property to disable HTTPD
          weblogic.httpd.enable=true
          # If authentication is required, add username/password for each user
          # who will be included in an ACL, as in this commented-out example:
          #weblogic.password.peter=#8gjsL4*
          # OPTIONAL PROPERTIES
          # These properties affect the behavior of the WebLogic Server.
          # You only need to set these properties if you want
          # to change the default setting, which is the property shown.
          # ADMINISTRATOR PROPERTIES
          # Administrator properties are optional information properties,
          # particularly useful for clusters.
          #weblogic.administrator.location=3355 California Drive, West Hampshire, CA
          94104
          #weblogic.administrator.name=Joe Administrator
          #weblogic.administrator.phone=1 415 555 1234
          # SYSTEM PROPERTIES
          # System properties in this section are set to system defaults
          # Performance pack. The shared library must be accessible from your
          # PATH (NT) or from your shared library path (UNIX; the name of the
          # variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
          weblogic.system.nativeIO.enable=true
          # Outputs logging information to the console as well as to the log file
          weblogic.system.enableConsole=true
          # Sets the directory or URL for the WebLogic Admin help pages
          # The help pages are shipped in the "docs/adminhelp" directory, in the
          # default document root in public_html
          weblogic.system.helpPageURL=g:/weblogic/myserver/public_html/docs51/adminhel
          p/
          # If you prefer to access the most recent help pages, you can do so online
          # by commenting out the previous property and uncommenting this one:
          #weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
          # Properties for tuning the server's performance
          # Number of WebLogic Server execute threads.
          weblogic.system.executeThreadCount=15
          # Other optional system properties
          # Limits size of weblogic.log (in K) and versions old log
          weblogic.system.maxLogFileSize=1024
          # Adjust minimum length of password
          weblogic.system.minPasswordLen=8
          # UNIX only: If running on port 80 on UNIX, enable the setUID program
          #weblogic.system.enableSetUID=false
          # UNIX only: Unprivileged user to setUID to after starting up
          # WebLogic Server on port 80
          #weblogic.system.nonPrivUser=nobody
          # CLUSTER-SPECIFIC PROPERTIES
          # Cluster-specific properties in this section are set to system defaults.
          # CLUSTER USERS: Note that ALL Cluster-specific properties should be set
          # in the per-cluster properties file ONLY.
          # Time-to-live (number of hops) for the cluster's multicast messages
          # (default 1, range 1-255).
          #weblogic.cluster.multicastTTL=1
          # Sets the load-balancing algorithm to be used between
          # replicated services if none is specified. If not specified,
          # round-robin is used.
          #weblogic.cluster.defaultLoadAlgorithm=round-robin
          # SERVER-SPECIFIC CLUSTER PROPERTIES
          # Cluster-related properties in this section are set to system defaults.
          # CLUSTER USERS: Note that these server-specific cluster-related properties
          # should be set in the per-server properties file ONLY.
          # Sets the weight of the individual server for the weight-based
          load-balancing.
          # Range is 0 - 100.
          # Larger numbers increase the amount of traffic routed to this server.
          #weblogic.system.weight=100
          # SYSTEM STARTUP FILES - Examples
          # CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
          # objects should be registered in the per-server properties file.
          # All other startup classes should be registered in the per-cluster
          # properties file.
          # For more info on writing and using startup file, see the
          # Developers Guide "Writing a WebLogic Client application," at
          # http://www.weblogic.com/docs51/classdocs/API_t3.html
          # Register a startup class by giving it a virtual name and
          # supplying its full pathname.
          #weblogic.system.startupClass.[virtual_name]=[full_pathname]
          # Add arguments for the startup class
          #weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
          # This example shows the entry for examples/t3client/StartupQuery.java
          #weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
          #weblogic.system.startupArgs.doquery=\
          # query=select * from emp,\
          # db=jdbc:weblogic:pool:demoPool
          # SYSTEM SHUTDOWN FILES - Examples
          # For more info on writing and using shutdown file, see the
          # Developers Guide "Writing a WebLogic Client application," at
          # http://www.weblogic.com/docs51/classdocs/API_t3.html
          # Register a shutdown class by giving it a virtual name and
          # supplying its full pathname.
          #weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
          # Add arguments for the shutdown class
          #weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
          # This example shows the entry for examples/t3client/ShutdownTest.java
          #weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
          #weblogic.system.shutdownArgs.ShutdownTest=\
          # outfile=c:/temp/shutdown.log
          # SECURITY-RELATED PROPERTIES FOR WORKSPACES
          # For backward compatibility, the following entries disable Access
          # Control on Workspaces
          weblogic.allow.read.weblogic.workspace=everyone
          weblogic.allow.write.weblogic.workspace=everyone
          # JOLT FOR WEBLOGIC PROPERTIES
          # These properties configure a BEA Jolt connection pool for use with
          # the simpapp and bankapp examples, and register a servlet for use with
          # with the simpapp example. The default server address provided here
          # points to a public TUXEDO server that is hosted by BEA for use with
          # this example.
          # Servlet registration for simpapp example:
          #weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
          t
          # Pool creation and cleanup
          # note this example is set up to work with the public
          # demo TUXEDO server available from BEA's website:
          #weblogic.system.startupClass.demojoltpoolStart=\
          # bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
          #weblogic.system.startupArgs.demojoltpoolStart=\
          # poolname=demojoltpool,\
          # appaddrlist=//beademo1.beasys.com:8000,\
          # failoverlist=//beademo1.beasys.com:8000,\
          # minpoolsize=1,\
          # maxpoolsize=3
          #weblogic.system.shutdownClass.demojoltpoolStop=\
          # bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
          #weblogic.system.shutdownArgs.demojoltpoolStop=\
          # poolname=demojoltpool
          # WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
          # The registrations enable a BEA IIOP connection pool and
          # register servlets for use with the simpapp and university examples.
          # Configure for your environment and uncomment to use.
          # Uncommenting these properties requires WebLogic Enterprise Connectivity
          # and an operating WebLogic Enterprise Server.
          # Servlet registration for simpapp servlet example
          #weblogic.httpd.register.SimpappServlet=\
          # examples.wlec.servlets.simpapp.SimpappServlet
          #weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
          # Servlet registration for simpapp EJB example
          # (You'll need to add the wlec_ejb_simpapp.jar to the
          # weblogic.ejb.deploy property in this file.)
          #weblogic.httpd.register.ejbSimpappServlet=\
          # examples.wlec.ejb.simpapp.ejbSimpappServlet
          #weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
          # Pool creation and cleanup for the simpapp example
          #weblogic.CORBA.connectionPool.simplepool=\
          # appaddrlist=//wlehost:2468,\
          # failoverlist=//wlehost:2468,\
          # minpoolsize=2,\
          # maxpoolsize=3,\
          # username=wleuser,\
          # userrole=developer,\
          # domainname=simpapp
          # Servlet registration for university Servlet example:
          #weblogic.httpd.register.UniversityServlet=\
          # examples.wlec.servlets.university.UniversityServlet
          #weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
          # Pool creation and cleanup for the University example:
          #weblogic.CORBA.connectionPool.Univpool=\
          # appaddrlist=//wlehost:2498,\
          # failoverlist=//wlehost:2498,\
          # minpoolsize=2,\
          # maxpoolsize=3,\
          # username=wleuser,\
          # userrole=developer,\
          # apppassword=wlepassword,\
          # domainname=university
          # WEBLOGIC FILE PROPERTIES
          # Maps a volume name to a path, for client file read/write
          #weblogic.io.fileSystem.[volumeName]=[fullPathName]
          # WEBLOGIC JMS DEMO PROPERTIES
          # CLUSTER USERS: Note that ALL JMS deployment should be done in the
          # per-cluster properties file ONLY.
          # You set up a JDBC connection pool if you want persistent messages
          # (including durable subscriptions). To use JMS and EJBs in the same
          # transaction, both must use the same JDBC connection pool. Uncomment
          # the following property to use the default JDBC connection pool
          # 'demo', which is defined in the Demo connection pool section of this file.
          #weblogic.jms.connectionPool=demoPool
          # The JMS Webshare example demonstrates how the ClientID for a
          # durable subscriber is configured in the connection factory:
          #weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
          #weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
          #weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
          #weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
          # The JMS trader example shows how to use JMS with an EJB. In addition
          # to uncommenting the following properties, you must also set up and
          # deploy the EJB example examples.ejb.basic.statelessSession.Trader in
          # ejb_basic_statelessSession.jar to try out this JMS example:
          #weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
          #weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
          #weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
          #weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
          # Registers the underlying servlet
          #weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
          # These properties are used with the ServerReceive JMS example,
          # which demonstrates how to establish a JMS message consumer
          # in a startup class:
          #weblogic.system.startupClass.serverReceive=\
          # examples.jms.startup.ServerReceive
          #weblogic.system.startupArgs.serverReceive=\
          # connectionFactory=javax.jms.TopicConnectionFactory,\
          # topic=javax.jms.exampleTopic
          # These properties are used with the PoolReceive JMS example,
          # which demonstrates how to establish a pool of JMS message consumers
          # in a startup class:
          #weblogic.system.startupClass.poolReceive=\
          # examples.jms.startup.PoolReceive
          #weblogic.system.startupArgs.poolReceive=\
          # connectionFactory=javax.jms.TopicConnectionFactory,\
          # topic=javax.jms.exampleTopic
          #weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
          # WEBLOGIC RMI DEMO PROPERTIES
          # CLUSTER USERS: Note that pinned RMI objects should be registered
          # in the per-server properties file ONLY. All other RMI startup
          # classes should be registered in the per-cluster properties file.
          # Remote classes registered at startup after the pattern:
          #weblogic.system.startupClass.[virtualName]=[fullPackageName]
          # These examples can be compiled to see RMI in action. Uncomment to use:
          #weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
          #weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
          #weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
          # WEBLOGIC EJB DEMO PROPERTIES
          # CLUSTER USERS: Note that ALL EJB deployment should be done in the
          # per-cluster properties file ONLY.
          # See WebLogic Demo Connection Pool below for a connection pool
          # to use with these examples.
          # Deploys EJBeans. Uncomment the appropriate lines below and
          # modify DBMS-related info and paths to match your particular installation:
          #weblogic.ejb.deploy=\
          # g:/weblogic/myserver/ejb_basic_beanManaged.jar, \
          # g:/weblogic/myserver/ejb_basic_containerManaged.jar, \
          # g:/weblogic/myserver/ejb_basic_statefulSession.jar, \
          # g:/weblogic/myserver/ejb_basic_statelessSession.jar, \
          # g:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
          # g:/weblogic/myserver/ejb_extensions_readMostly.jar, \
          # g:/weblogic/myserver/ejb_subclass.jar, \
          # g:/weblogic/myserver/jolt_ejb_bankapp.jar
          # Servlet used by the EJB basic beanManaged example
          # Uncomment to use:
          #weblogic.httpd.register.beanManaged=\
          # examples.ejb.basic.beanManaged.Servlet
          # Add a list of users (set the password with
          weblogic.password.[username]=XXX)
          # to set an ACL for this servlet:
          #weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
          #weblogic.password.user1=user1Password
          #weblogic.password.user2=user2Password
          # WEBLOGIC XML DEMO PROPERTIES
          # These properties are required to run the XML examples.
          # Uncomment to use.
          # CLUSTER USERS: Note that ALL servlets should be set up
          # in the per-cluster properties file ONLY.
          #weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
          # BizTalk example properties
          #weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
          #weblogic.jms.queue.tradeError=biztalk.jms.tradeError
          #weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
          dapter
          #weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
          # WEBLOGIC ZAC DEMO PROPERTIES
          # These registrations enable the ZAC Publish Wizard.
          weblogic.zac.enable=true
          # Set the publish root for a WebLogic Server. Edit and
          # uncomment to use.
          #weblogic.zac.publishRoot=g:/weblogic/zac
          # Set an ACL for each package you publish. The [name] is
          # the "Package name" you assign in the ZAC Publish Wizard.
          # Publish a package, edit this property, and uncomment to use.
          #weblogic.allow.read.weblogic.zac.[name]=[user list]
          #weblogic.allow.write.weblogic.zac.[name]=system
          # HTTPD ADMINISTRATIVE PROPERTIES
          # Enables logging of HTTPD info in common log format and
          # sets the log file name (default is "access.log" in "myserver")
          weblogic.httpd.enableLogFile=true
          weblogic.httpd.logFileName=access.log
          # Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
          weblogic.httpd.enableEvents=false
          # Enables HTTP sessions
          weblogic.httpd.session.enable=true
          # Sets an optional cookie name. The default name is "WebLogicSession".
          # Prior to version 4.0, the default was "TengahSession". To make
          # this backward compatible with cookies generated from previous
          # installations, you should set this property to "TengahSession".
          # Uncomment this line and set this to any string of your choice,
          # or comment out this property to use the default.
          #weblogic.httpd.session.cookie.name=WebLogicSession
          # MIME types
          weblogic.httpd.mimeType.text/html=html,htm
          weblogic.httpd.mimeType.image/gif=gif
          weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
          weblogic.httpd.mimeType.application/pdf=pdf
          weblogic.httpd.mimeType.application/zip=zip
          weblogic.httpd.mimeType.application/x-java-vm=class
          weblogic.httpd.mimeType.application/x-java-archive=jar
          weblogic.httpd.mimeType.application/x-java-serialized-object=ser
          weblogic.httpd.mimeType.application/octet-stream=exe
          weblogic.httpd.mimeType.text/vnd.wap.wml=wml
          weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
          weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
          weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
          weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
          # In seconds, the keep-alive for HTTP and HTTPS requests
          weblogic.httpd.http.keepAliveSecs=60
          weblogic.httpd.https.keepAliveSecs=120
          # WEBLOGIC JDBC DRIVER PROPERTIES
          # Enables JDBC driver logging and sets the file name for the log
          # The weblogic.jdbc.logFile is placed in the per-server
          # directory (default is "myserver")
          weblogic.jdbc.enableLogFile=false
          weblogic.jdbc.logFileName=jdbc.log
          # WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
          # CLUSTER USERS: Note that ALL JDBC connection pools should be set up
          # in the per-cluster properties file ONLY.
          # For creating JDBC connection pools. This example shows a connection
          # pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
          # to use 4 JDBC connections (with a potential for up to 10 connections,
          # incremented by two at a time, with a delay of 1 second between each
          # attempt to connect to the database), to an Oracle database server called
          # "DEMO." If more than 4 connections are opened, after 15 minutes, unused
          # connections are dropped from the pool until only 4 connections remain
          open.
          # Every 10 minutes, any unused connections in the pool are tested and
          # refreshed if they are not viable.
          #weblogic.jdbc.connectionPool.oraclePool=\
          # url=jdbc:weblogic:oracle,\
          # driver=weblogic.jdbc.oci.Driver,\
          # loginDelaySecs=1,\
          # initialCapacity=4,\
          # maxCapacity=10,\
          # capacityIncrement=2,\
          # allowShrinking=true,\
          # shrinkPeriodMins=15,\
          # refreshMinutes=10,\
          # testTable=dual,\
          # props=user=SCOTT;password=tiger;server=DEMO
          # Get more details on each argument for this property in the
          # Administrators Guide on setting properties at:
          # http://www.weblogic.com/docs51/admindocs/properties.html
          # Set up ACLs for this connection pool with the following:
          #weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=\
          # guest,joe,jill
          #weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
          # joe,jill
          #weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\

Problem Resolved!
          I found out that I had 'http' instead of 'httpd' in the statement where I
          registered my servlet, SqlServlet.
          Now, I am having difficulty with hot deployment. The server is returning
          error 404.

GoodReader iDisk sync error 404

Similar Messages

Maybe you are looking for