Goods issue against Serialized finished material

Dear Friends,
In our scenario we issue some extra components(261) against finished material - which is a serial number managed material. which we called as a forcefull consumption. For this purpose we create production order for finished material and issue components against this prod order.
Now the issue is, if I create production order for 10 finished material, and if I issue components through MB1A - 261 Mvt against prod order, system does not ask me serial number of finished mat and serial number option in "Goto" menu is greyout.
1) How to ensure that for which serial number finished mat the components are issued.
2) How to activate this serial number option in menu and make it mandatory.
3) Is there any other way out.
Waiting for your reply
Thanks in advance
Thanks & Regards,
Dhananjay

Hi,
Remember in SAP in general Production or Process order is the cost carrying Object.
So any 261 or 101 material postings done are posted to the Order,
When the order is settled , will be settled to a Material or a Cost centre.
you are looking for a Serial no for a Production order header material, the system will prompt only if the header material movement is done Like GR or Gi. Not when the compoenent are moved.( non serial compoenents)
Regards
Ratan

Similar Messages

Excess goods issue against Production order

HI PP Gurus,
My requirement is to block excess goods issue of raw material against a production order.
Ex. Production order qty = 10 , For producing 10 Finish goods i require 10 raw material. When i do confirmation via CO11N the system automatically shows GR & GI Values in Goods Movement tab. there i change GI value of RM from 10 to 20 the system takes the value and does the GR & GI.
My requirement is that the system should not do GR & GI if the GI value is more than that is calculated at the time of creation of Prod. Order.
Thanks in Advance,
Deven

Hi,
Rstriction of excess goods issue against production order is not possible in standard setting.
For achiving this you have to go for User exit.
The logic should be
In MIGO check mvt. type 261
Pass the order through table RESB and select all the components with quantity.
Capture the header material of order and use this as input along with the order creation date, plant and BOM application to explode function module CS_BOM_EXPLOSION.
THis will give you the BOM components which were valid at the time of order creation.
Now compare these BOM components with the components from RESB with quantity.
Here conditions will come in picture
If quantity is exactly matching then GI will be possible
or if you want to keep tolerance limit say for 10% then accordingly you can map the condition.
Regards
Amit Parkhi

Posting multiple goods issues against the same delivery

Hello gurus,
We are a fashion apparel company using ECC 6.0 and would like to know if it is possible to post mutliple goods issues against the same delivery?
I will explain the business requirement.
- We create a stock transport order to deliver 400 units of merchandise to on or our retail stores (STO is created and processed to a delivery).
- This information is passed down to our warehouse management system (which is not SAP)
- Our warehouse management system has the ability to split a delivery into multiple shipment when needed. For example, our warehouse may only be able to complete 250 units for our morning shipment and will therefore pick, pack and post this. This will feed back into SAP and process a 641 movement so that the units now show as "in transit". This is needed so that our stores can process the ASN and move the units into their inventory when they receive the merchandise later that day.
- During the afternoon, our warehouse will process the remaining 150 units and will ship this to our store later in the evening or next day.
Currently, we are not able to process another goods issue against a delivery as we close out the delivery during the first goods issue. We would prefer not to have to generate a new delivery for our DC and let them continue to process against the same delivery, but we are unsure how to configure this.
Any help or guideance would be extremely appreciated
Thanks in advance

Hi RJ,
First of all sorry to write such a lengthy reply,In one line if i want to summerize then it is not possible with standard SAP however we can achieve this by writing some piece of code in both the system
AS - IS
               Business process
          From business process point of view you are right that once the pick & pack is in process it is not advisable to create a new delivery document for balance quantity and share the same with WMS as then they have to create a new document in WMS and start picking based on that rather then the old delivery document number. if i am in your position then i can give a thought like this
e.g.
Delivery                                                  - 100 Unit
Shipment confirmation from WMS            -   60 Unit
Change in delievry quanity / Pick qty        -   60 Unit
Invoice from SAP                                    -   60 Unit
Second confirmation from WMS                          -   40 Unit
Change in the existing delivery quantity                -   Now here we have two option either
1) Change the delivery quantity / Pick qty to (60+40) =100 or
2) Remove the 60 and update 40 as delivery and pick quantity
Pros & Cons
if you will select option 1 then furhter invoice will happen for 100 unit which is incorrect as physically you are shipping only 40 unit
if you are selecting option 2 then the document flow is incorrect as you don't have history(in SAP) for the 60 unit which was shipped earlier
Solution ::
so in my opinion the best option is to create a seperate delivery document (store the old delviery number in one of the field of the new delivery and pass the same to custom segment of the IDoc) transmit the IDoc to WMS write the validation logic in WMS
Find the record with old deliver number in the WMS system, check the status whether it is active or inactive
if it is acitive Validate the Material + qty with the WMS record(Material + balance quantity) if both are same then pass the new deliery number to custom field of the WMS table
At the time of confirming back to the SAP, Write a piece of code in SAP that if the incoming idoc custom field(new delivery number) field is populated then ignore the orignal document number and post the document using the new delivery document number
Hope this help

Post a good issue against an outbound delivery with movement type 601 K

Hello,
according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level.
Since the owner of the goods isn't my client the item is managed only at quantity level (not value) so I'm not interesed in the accounting document.
To do it I'm using the functionality related to the vendor consignment stock but I'm not able to post the good issue against an outbound delivery using the movemement type 601 and the special stock indicator equal to K.
In particular I've tried in two different ways:
- setup the consignment stock indicator (= K) into the sales item category, but when I post the goods issue the system is not able to find out the right vendor
- to create a stock determination rule instead of the setting previous described, but the system display an error message (Fld selectn for mvmt type 601 / acct L534200770 differs for Cost center (010) ) even if the accouting is not relevant in my scenario
Can you suggest me how the system has to be setup in order to cover my requirements?
Thanks in advance,
Alessandro

Hi,
Please clarrify which material type you are using in this scenario? I suggest you to use material type UNBW (no value updation will be there) and create a material master. Use special stock indicator K. Proceed with 601K to do GI. Hope it works. Thanking you.

POST GOODS ISSUE AGAINST RESERVATIONS

Dear All,
I want to restrict the goods issue against the manual reservations.
Logic:At the time of goods issue against the reservation system should check stock in hand(unrestricted stock)-all previous reservations.
Eg:suppose unrestricted stock is 50kg
Reservation 1 for 20 kg
Reservation 2 for 30 kg
Reservation 3 for 40 kg
Reservation 4 for 10 kg
When i do goods issue for Res :3
System should check Uns Stock(50kg)-Previous Res(20kg+30kg)
give error message stock insufficient.
Waiting for the expert comment.
Kind Regards,
Sankar T

Hi
   Let me tell you with that logic reservation works.
While creating manual reservation, system checks whether material is available on specified date or not. In case material is available then system will allow to reserve the material otherwise not.
    Now take your case, if you have made following reservations
1) 20 Kg
2) 30 Kg
3) 40 Kg
4) 10 Kg
This means against each reservation material will always be available for particular reservation (because no one can issue particular material by any other means)
Now suppose in unrestricted use 50 kg of material is available and you want to issue the material against reservation No 3 then system will issue material from reserved material (Not from the un restricted use)
   This means the logic which you want to use is already applied by SAP in one step before (while creating reservation) so need not to apply same logic once again.
   and if you still want to use this logic , you take a help of ABAPer , he only can help you in this mater
Reward if helpful

Account Detrmination for Goods Issue against Order

Dear All,
We have a requirement where goods issued against reservation created through plant maintenance order should hit repairs & maintenance account instead of default account such as consumption stores and spares.
Can any changes be made in configuration so that the default account can be changed either while saving plant maintenance order or can the default be overwritten when material is issued through MB1A against reservation.
Useful answers will be rewarded with points
Regards
Milind Nair

Dear
Your knowldge iam adding the points
In materail master check the Valuation class 4 digits (ex: 2010)
is assigned in material master . The same material will be used in many places , this valaution class depends Production created by Fi.
This same will have assigned in G/L at OBYC t code. Here we assign as automatic posting. The same G/l account has given as automatic posting in G/L t code FS00.
In obyc has many process example for goods issue it will come as BSX. costing difference PRD.
your materails type is ERSA these types may bes used many plcaes other than Pm . If clinet interests you can assign valuation class with seperate G/l account for PM
All the G/L , costing docuemnts will appear while doing migo (mb1a) 261 movements as per your obyc seetings
Tell requirements with FI/MM

Partial Goods Issue against a Delivery Document

Dear Xperts,
I am having a scenario regarding standard Stock Transport Process with Delivery(Material Movement 641).
My requirement is, when I will create a Stock Transport Order the Delivery document will automatically be created at the same time.This can be achieved thru customization.
But the problem is , the material quantity in the delivery document will be same as the order quantity in PO.My question is :
1. Can the user change the quantity in delivery which is automatically got created at the time of PO creation.
2. If yes, then for the remaining order quantities , shall the system will automatically create another delivery?
3. If no, can we do partial goods issue against that delivery if total material is not available at sending plant?If yes , how to configure?
Means , In delivery my material qty is 10, can I do Post Goods Issue of leass than 10 qty & create a proforma invoice against that delivery and do the P.G.I. and Billing again against that delivery?
Plz advice.
Regards,
Soumick

Hi
As per your scenario you can do the PGI (post goods issue ) for partial quantity only if u required later for reaming quantity when ever stock is available that time you can do again PGI by using the same delivery no for reaming quantity but for this
In PO you have unchecked the Delivery completed indicator with this when ever complete goods are coming then only PO will
be close up to that PO will be in open Status
Regards
Balaraju

Goods Issue against Work Order assigned to WBS - Report

We are doing Goods Issue against Work Order with movement 261, the data picked up from work order is not including
the WBS element mentioned on the work order. Through this WBS element report is created through MB51, with total receipts, total issues, transfer postings etc made against WBS element, but without WBS element No. in material document,
we cannot pull this report through MB51, as we see material document No.created against work order but not the WBS
No. there, so this report cannot be pulled from MB51 through WBS element.
Does anyone know of any other report that I can pull From WBS No. as all these material documents are hitting WBS with
total receipts, total issues, transfer postings against the said WBS mentioned in the work order.
Doing Good issue against WBS is no problem, as the material document saves the WBS No.

>
Justin zhang wrote:
> 1. Try to see CN52N whether meet your business requirments
>
> 2. I use two steps approach investigating material documents for project WBS element:
>
> a. use IW39 list the work orders by selection criteria of WBS (this is PM order list).
> b. use SAP std. ALV copy functions and past work order numbers into MB51selection criteria
>
>
> I'm interested in std. t-codes if others can provide. Thanks.
>
> Edited by: Justin zhang on May 19, 2010 10:17 AM
Thanks Justin, your IW39 solution worked, as it has posting date selection defined there
which I cant find in CN52N. My solution was take details from MB51, then pull report IW39 within
posting dates and then export the WBS elements against work order to excel and then copy
the WBS elements in the MB51 report created.

Dump while doing goods issue against order with movement type 261

Hi Team,
We are integrating Asset management process along with the goods issue against the order which is created with a business partner for movement type 261.
when we try to complete the process the system gives us a dump as described below.
please look through the dump and advice for the same.
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
Error analysis
    Short text of error message:
    System error in the FI/CO interface
    Long text of error message:
     Diagnosis
         Updating of the FI/CO interface was called with object type "MKPF"
         yet the checks were run for object type "AMBU".
     System Response
         Checking and updating must be for the same object type.
     Procedure
         It has to do with a system error from the calling applications.
    Technical information about the message:
    Message class....... "RW"
    Number.............. 103
    Variable 1.......... "MKPF"
    Variable 2.......... "AMBU"
   Variable 3.......... " "
   Variable 4.......... " "
rigger Location of Runtime Error
   Program                                 SAPLMBWL
   Include                                 LMBWLU21
   Row                                     62
   Module type                             (FUNCTION)
   Module Name                             MB_POST_GOODS_MOVEMENT
46    IF xmkpf-xabln IS INITIAL.                               "note 434093
47        CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
48    ENDIF.                                                   "note 434093
49
50 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
51
52 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
53    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
54         EXCEPTIONS
55           error_message = 4.
56 * As soon as we have started to put things into UPDATE TASK, we must
57 * ensure that errors definitely terminate the transaction.
58 * MESSAGE A is not sufficient because it can be catched from
59 * external callers which COMMIT WORK afterwards, resulting in
60 * incomplete updates. Read note 385830 for the full story.
61    IF NOT sy-subrc IS INITIAL.
>>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
63                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
64 *     MESSAGE A263.
65    ENDIF.
66 * Optische Archivierung
67 * Spaete Erfassung mit Barcode
68 * Redesign of barcode handling -> note 780365
69   PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
70                                          xmkpf-mjahr
71                                          barcode.
72
73   MOVE-CORRESPONDING xmkpf TO emkpf.
74   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
75     EXCEPTIONS
76       error_message = 4.
77    MOVE-CORRESPONDING xmkpf TO emkpf.
ource Code Extract
ine SourceCde
32 *    BKPF as well. There is no other way to forward XBLNR to FI as not
33 *    every document is posted by MB_CREATE -> a new function module in
34 *    MBWL for transferring the information, called by FI, meant to load
35 *    the complete function group for all MBxx postings when this isn't
36 *    required (Performance). Would be the better way to transport the
37 *    information after switching off MBxx in later release.
38 *    corresponding IMPORT ... FROM MEMORY ... can be found in
39 *    AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40      l_mem_id = 'MKPF-XBLNR'.                                   " 641365
41      EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
42    ELSE.                                                        "1245374
43      l_mem_id = 'MKPF-XBLNR'.                                   "1245374
44      FREE MEMORY ID l_mem_id.                                   "1245374
45    ENDIF.

Couple of notes are mentioned (385830, 780365 etc) and check whether these notes are applied. If so, check with the ABAPer and go through the source code corrections explained in the respective notes.
You may also go through the following notes
1) Note 386656 - FBV4: RW103 'System error in the FI/CO interface'
2) Note 388316 - RW103 "System error in the FI/CO interface"
3) Note 543463 - Inconsistent Posting in budgetary ledger and/or RW102/RW103
thanks
G. Lakshmipathi

Goods Issue with reference to Material document

Hello,
I would like to create Goods Issue with reference to material document (Transfer Posting document) , but the following message appears :
"Selected material document does not correspond with action to be executed".
Is it possible to create Goods Issue with reference to Transfer Posting (mov.type 311 - from stor.loc. to stor.loc.) ?
Thanks

Thanks,
probably I'll have to find another way to solve this business requirement of copying the transfer document data in GI.
We have an auto created transfer postings via interface from another system and the main idea was to use already entered fields in transfer posting document such as material , quantity , text , goods recepient , etc. and not to enter them twice when GI should be created. In our case (it's a case for certain materials) it's always 1:1 relationship, so the idea was to facilitate the job of creating the GI, because GI should contain the same data as in transfer posting document.

Goods Issue ./ Serial Number Report

Guys,
I want to create a report which gives me the Goods Issue details with the items in the goods issue and Serial Numbers processed in those particular goods issues.
The problem is that with the following coding, it is returning all the Serial Numbers related to the particular item available in SAP and not only those relating to that particular Goods Issue. So if I have a quantity of 2 Serial Numbers for one item, it is not returning to Serial Numbers for that Goods Issue, but it is returning all Serial Numbers of the System under that Item.
I suspect that it is a JOIN problem, what do you think?
Coding is:
Select
                    T0.DocDate as 'Goods Issue Date'
,                    T0.DocNum as 'Goods Issue Reference'
,                    T1.ItemCode as 'Item Code'
,                    T1.Dscription as 'Item Description'
,                    T2.IntrSerial as 'Serial Number'
,                    T1.OcrCode as 'Cost Centre'
,                    T1.LineTotal as 'Total Cost'
,                    T1.U_eReasonCode as 'Reason Code'
,                    T0.Comments as 'Remarks'
From
                    OIGE T0 JOIN IGE1 T1 ON T0.DocEntry = T1.DocEntry
                              LEFT OUTER JOIN OSRI T2 ON T1.ItemCode = T2.ItemCode
Order By
                    T0.DocNum
Many thanks for your work everyone.
Regards,
Vankri

Hi,
You can go to Inventory >>> Inventory Report >>> Serial Number Transaction Report. There are a lot of criteria you can choose to generate your own report.
In your case, choose Dates and Documents tab and then enter your criteria.
Hope this helps,
Son.

Goods Issue against outbound delivery from blocked stock

Dear All
I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
Please let me know any solution for this.
Thanks and Regards
Satish Kumar

Hi
Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
http://scn.sap.com/thread/1541911
Thank$

GOODS ISSUE AGAINST GRN NO.

Hello
Can we do Goods Issue against the GRN No. ???
Regards
Jay
Moderator message: locked because of violating forum rules - please read the rules before posting. Subject must not be in capital letters only
Edited by: Jürgen L. on Feb 22, 2012 3:31 PM

Hi,
No you can not do a goods issue against a GRN.
Goods iisue will be done against a account assignment like order, cost center, scrap, delivery etc .
Regards,

Goods issue against reservation with interchangeable part using MB11/MIGO

Hi
Do anyone know how to make a goods issue against reservation with interchangeable part using MB11/MIGO.
Meaning reservation is made with Part A, goods issue is make with Part B (interchangeable to part A).
Enhancement pack 4 is having some issue with MB1A, we are attempting to do a work around with MB11 / MIGO.
Please assist.
Thanks!!
Regards,
Clarice

You can view report from MB25 ,it will gives you reservation list with reference network number.
Select option in MIIGO as GI > Reservation > Mvt.281. or you can make the entry from MB1A with Mvt .type-281
Regards,
Sandesh Sawant

How to restrict reversal of Goods issue against production order.

Dear All,
How to restrict reversal of Goods issue against production order if production order status is CNF or DLV.
i want that user can not reverse the goods issued against production order, if they want to do so, then user has to reverse the GRN and reverse the GI then only.
Please suggest the solution.
Regards,
Sandeep Dhruve

Hy Sandeep,
You have to use User Exit for this.
The following enhancement is available for production orders:
o   CCOWB001    User exit for modifying menu entries
You can use this function module to deactivate menu entries or
functions. The locked functions can then no longer be executed by the
user.
The enhancement CCOWB001 contains the following components:
Function exit
o   EXIT_SAPLCOWB_001   Good movement: Deaktivate functions
      Display documentation
Regards,
Dhaval
Edited by: Dhaval Choksi on Aug 22, 2008 3:01 PM

Goods issue against Serialized finished material

Similar Messages

Maybe you are looking for