Goods issue and backflush for the same component

Hello All,
We want to do goods issue for some components and if the complete amount of Material is not issued, we want the remaining quantity to be backflushed. Is this possible in SAP, if it is possible can any one tell me how. Thanks in Advance.

Dear Mohan,
In my understanding it is not possible,say in case if you have set the backflush indicator either in the material master or else in
the production order,you cannot perform manual good's issue against that reservation number through MB1A for 261
movement.
But you will be able to issue the materials against the order using MB1A.Based on the order quantity at the time of confirmation
either using CO11N/CO15 ,the system performs backflush for the component's quantity.
I would suggest either backflush the component or else do the good's issue manually.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

HT1918 im registered with qatar store and and id for the same . now iam in indai i want to change my store and register it with indian store . how can i do ?

Im registerd with Qatar store and now i want to change the same to india store.Do i need a seperate id for the same ? If so how can i do dat ?

you need to be running OSX 10.7 or 10.8 to use iCloud i believe. It shows you are using 10.6.8 which doesn't support iCloud.

Text and images in the same component?

Ok... a lil help please :
into what component can i put text and images at the same time
as in...
example, what component could contain data like this :
Hello this is me <imageofmyself> and this is my house <imageofmyhouse>... bye all !
thanks in advance,
Jonathan, a.k.a. Kyraz

You could use a Swing HTMLPANE or draw it all onto a
BufferedImage and display that (code posted under 2D graphics thread).
MArk

Hello Experts., I would like to use only Lightroom but current set up by Adobe will force me to get Photoshop along with Lightroom. Is there any way where I can get only Lightroom and pay for the same.

In the present set up by Adobe if one need Lightroom alone, they have to get and pay for Photoshop also Which I am not interested. Is there any way I can get only Lightroom.? Please help.

Just for clarity, the strict answer to your question is "no": you can't get just Lightroom for the same price as the Lr/Photoshop Creative Cloud (CC) bundle.
You can buy a stand-alone licence for Lightroom alone - that's what Don and Elie have helped you to find - but the pricing (and licencing) arrangements are entirely different to those which make up the CC bundle.
Note too, it's likely that Lightroom 6 will be coming before long (although how long is not known): you will almost certainly have to pay for the upgrade to Lr 6 if you're on a stand-alone licence, whereas moving from 5 to 6 (and to 7 and to...) is included in the price of the bundle.

Mix AVG and Total for the same column in ALV grid

Hi,
We are using CL_GUI_ALV_GRID=>SET_TABLE_FOR_FIRST_DISPLAY, and I'd like to know if the following situation is possible.
Let's say we have a column which contains a number of hours, and we set it up to subtotal by period, but as an average rather than a total (DO_SUM = "C"). This is not a problem so far.
The problem is that we'd like for the "Grand Total" at the bottom of the ALV grid to total all of the subtotal averages, instead of calculating an average.
Ex:
Period            Hours
2010/01           6.0
2010/02           7.0
2010/03           2.0
                5.0 (This is an average... 6.0 + 7.0 + 2.0 / 3)
2011/01          12.0
2011/02           5.0
2011/03           4.0
                7.0 (This is an average... 12.0 + 5.0 + 4.0 / 3)
            12.0 (We want this to be a total of 5.0 + 7.0)
So we want the "grand total" line to be 12.0 which is the sum, but it currently comes out as an average.
Therefore we're looking to average at the sub total level, but we want a total of the subtotal levels at the grand total level for the same column.
Thanks,
Denis

Refer to the suggestion given by Naimesh here Can we modify a sub-total in ALV making use of function GET_GLOBALS_FROM_SLVC_FULLSCR and the method GET_SUBTOTALS. You can see the parameter ep_collect01 refered in case of subtotals. Can you please check ep_collect00 for grand total in your case.
As said about EP_COLLECT00,here goes a classic example Modify grand total in ALV GRID
BR
Keshav
Edited by: Keshav.T on Sep 21, 2011 9:39 AM

Display discounts and surcharges for the same vbeln in the same row

hi experts
i have to display one discount and surcharges for one vbeln, posnr and one material,
i have used konv-kschl for condition type and konv-kwert for condition value.
in my output the conditions what i have given for discounts and surcharges its matching and displaying in different lines for the same vbeln and posnr. usually i should get one line of outputfor one vbeln, but iam getting 3 times repeated
(one without discounts, surcharges,
second : same vblen, posnr with discounts,
third : same vblen, posnr for surcharges )
please modify the internal table and conditions below what i have given in my object.
DATA : BEGIN OF it_konv OCCURS 0,
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kwert LIKE konv-kwert, "Condition value
kbetr LIKE konv-kbetr,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF it_konv.
LOOP AT it_konv INTO wa_konv.
CASE wa_konv-kschl.
WHEN 'ZD01' OR 'ZD02' OR 'ZD03'.
wa_konv-discounts = wa_konv-kwert.
WHEN 'ZEXP' OR 'ZEXW' OR 'ZCAF' OR 'ZCAP' OR 'ZCAQ'
OR 'ZS01' OR 'ZS02' OR 'ZS03'.
wa_konv-surcharges = wa_konv-kwert.
WHEN OTHERS.
DELETE it_konv WHERE kschl = wa_konv-kschl.
ENDCASE.
MODIFY it_konv FROM wa_konv TRANSPORTING discounts surcharges.
CLEAR wa_konv.
REFRESH wa_konv.
ENDLOOP.
As per one of the abap expert who responded to my query is the following.
DATA : BEGIN OF it_konv OCCURS 0,
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kwert LIKE konv-kwert, "Condition value
kbetr LIKE konv-kbetr,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF it_konv.
DATA : BEGIN OF wa_konv OCCURS 0,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF wa_konv.
move '1' to it_konv-knumv.
move 'ZD01' to it_konv-kschl.
move '1200' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
move '2' to it_konv-knumv.
move 'ZEXP' to it_konv-kschl.
move '1300' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
move '3' to it_konv-knumv.
move 'ZEXP' to it_konv-kschl.
move '1400' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
LOOP AT it_konv.
MOVE-CORRESPONDING it_konv to wa_konv.
CASE IT_konv-kschl.
WHEN 'ZD01' OR 'ZD02' OR 'ZD03'.
wa_konv-discounts = IT_konv-kwert.
WHEN 'ZEXP' OR 'ZEXW' OR 'ZCAF' OR 'ZCAP' OR 'ZCAQ'
OR 'ZS01' OR 'ZS02' OR 'ZS03'.
wa_konv-surcharges = IT_konv-kwert.
ENDCASE.
COLLECT WA_KONV.
CLEAR wa_konv.
ENDLOOP.
But to try according to the above, i dont have the values for kwert, i know only the condition type (KSCHL). based on this how can i solve my problem
please clarify
thanks in advance

Refer to the suggestion given by Naimesh here Can we modify a sub-total in ALV making use of function GET_GLOBALS_FROM_SLVC_FULLSCR and the method GET_SUBTOTALS. You can see the parameter ep_collect01 refered in case of subtotals. Can you please check ep_collect00 for grand total in your case.
As said about EP_COLLECT00,here goes a classic example Modify grand total in ALV GRID
BR
Keshav
Edited by: Keshav.T on Sep 21, 2011 9:39 AM

Goods Issue Production Order for Confirmed Qty Component

Dear PP Gurus,
Here is my case :
Stock Qty for Sparepart A : 100 un
First production will require 80 un A, and availability check confirmed. Second Production Order will require 70 un A, where 20 un confirmed and 50 un is not confirmed on availability check. When i try to goods issue the second production order, it is allowed to consumed all 70 un because unrestricted stock is 100. How can i forbid goods issue in second production order only for 20 un A which is confirmed before.
Thanks,
Arman Lie

Dear
First of all what ever qty u release during production it well get copied in confirmation so as u said first production order is 80 so the balance qty is 20 out of 100 units so for 20 production order is confirmed so u need another production order for 70 in that case u have deflicit stock of 50 so for that reason ur production order not get confirmed for 50 in order to confirm this order u need t make a stock of 50.
1. check in the OPK4 enable the actual qty
2.check t-code OPJK Checking Rule and check when material availability when saving the order
and please check in the material master what availability check u have maintained in mrp
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/cf/70124adf2d11d1b55e0000e82de178/frameset.htm]
With Regards
Pushpalas

Using more than one PU and PC for the same database

I have a scenario described here: [http://www.seamframework.org/Community/UsingTwoParallelNestedConversationsWithParentAtomicConversation|http://www.seamframework.org/Community/UsingTwoParallelNestedConversationsWithParentAtomicConversation]
which uses Seam, EJB3, JPA, Hibernate, Richfaces (modalPanel) and JSF.
The question I have is the following:
is there any negative consequence (memory consumption, performance hit, etc.) of using more than one persistence unit in the persistence.xml that points to the same EntityManagerFactory? I was thinking of having one PersistenceContext (Seam-managed PC - an extended PC which is conversation-scoped) which uses one PU and reserving the other PC for the modalPanel forms and backing beans (SFSBs).
The reason I needed to use this solution/approach is so that when using Hibernate MANUAL flush with SMPC, I can achieve isolated synchronization of the PersistenceContext without updating values in the modalPanel forms and vice versa.
Any tips on best practices or alternative solutions? thx.
persistence.xml snippet:
   <persistence-unit name="boBETS">
      <provider>org.hibernate.ejb.HibernatePersistence</provider>
      <jta-data-source>java:/boBETSDatasource</jta-data-source>
      <properties>
         <property name="hibernate.dialect" value="org.hibernate.dialect.SQLServerDialect"/>
         
         <property name="hibernate.show_sql" value="true"/>
         <property name="hibernate.format_sql" value="true"/>
         <property name="hibernate.generate_statistics" value="true"/>
         <property name="jboss.entity.manager.factory.jndi.name" value="java:/boBETSEntityManagerFactory"/>
         <property name="hibernate.default_catalog" value="boBETS"/>
         <property name="hibernate.default_schema" value="dbo"/>
      </properties>
   </persistence-unit>
   
   <persistence-unit name="boBETS2">
      <provider>org.hibernate.ejb.HibernatePersistence</provider>
      <jta-data-source>java:/boBETSDatasource</jta-data-source>
      <properties>
         <property name="hibernate.dialect" value="org.hibernate.dialect.SQLServerDialect"/>
         
         <property name="hibernate.show_sql" value="true"/>
         <property name="hibernate.format_sql" value="true"/>
         <property name="hibernate.generate_statistics" value="true"/>
         <property name="jboss.entity.manager.factory.jndi.name" value="java:/boBETS2EntityManagerFactory"/>
         <property name="hibernate.default_catalog" value="boBETS"/>
         <property name="hibernate.default_schema" value="dbo"/>
      </properties>
   </persistence-unit>What happens if I were to have 10 PUs and 10 PCs in the same app? Whether they're all pointing to same DB or not. What's the consequence of using "too many"?

Yes, you can use multiple iCloud accounts in multiple User Accounts on one computer, but, as you know not multiple iTunes Match accounts. Keep in mind that the two services are not the same.
Since you've posted your question to the iTunes Match forum, which it really doesn't pertain to, you might want to also post it to the iCloud on my Mac forum.

Different document restrictions in Acrobat and Reader for the same document

When I create a PDF in Acrobat Professional 9 with no security, the document restrictions summary shows comments as allowed and I can add comments in Acrobat Professional, but when the same document is opened in Adobe Reader 7, 8 or 9, the document restrictions summary show comments are not allowed and comments cannot be added.
When I add password security to a document allowing comments, the document properties in Acrobat Prof 9 shows comments are allowed and I can add comments. When the same document is opened in Adobe Reader 7,8 or 9, the document restrictions summary show comments are not allowed and commenting is disabled.
Has anyone come across this issue?

How about "Document Assembly", "Creation of Page Templates", etc?
I am submitting a grant application and they require the document setting is done in the way the reviewers can assemble, change the template, edit, comment on the document.
When I open the document in Acrobat all these are allowed, and when I open the document in Reader they are not allowed. Should I assume that whatever is opened in Reader is always in the setting that these are not allowed? Or is there anything I have to do to change the setting in the "Reader"?

Good apps and games for the disabled?

My brother in law was born premature and as a result has a number of neurological and muscular problems. He has been wheelchair bound since he was very young, and mentally he will likely not develop past about a third grade intellect. He is currently 30, and his parents have gone to great lengths to take care of him as best they can. I've known him for about four years now, and he's got the personality of a guy that you can't help but like
My in laws live on the other side of the US as my wife and I do, but we're going to be flying out to visit them in a few weeks. I'm always seeing young kids at airports and the supermarket playing games on their parents' smartphones and tablets, and that got me to thinking that an iPad might make a great belated 30th birthday present for my brother in law. It's got an easy to understand interface, a touchscreen that's large enough for him to effectively interact with, and it could provide him with much more intellectual stimulation than watching The Price Is Right.
Before giving it to him, I'd really like to load it up with games that he will be able to play. I've never owned an iPhone or an iPad, though, so the only ones I'm familiar with are the super popular (Angry Birds and Cut the Rope) and what few games I've played around with on my Android powered phone.
Can anyone make some suggestions for me about apps that I could get for him? The more kid friendly, the better. He does have limitations to motor control in his hands, so I think it'd be best if the app didn't require a high level of precision (for example, Slice It! probably wouldn't be too fun). I don't mind if it's not free- if I'm already spending a few hundred dollars on the hardware, $5 for software isn't a big deal
Thanks in advance!

Forgot to add this. You'll have to decide whether to get an iPad (new version, 3) or an iPad 2. Although a bit more costly, I would recommend the new iPad. It comes with a dictation app and when iOS 6 http://www.apple.com/ios/ios6/ is released in the fall, it will have Siri. With Siri, he can speak sites to go to in Safari, the browser. There is a free dictation app, Dragon Dictation, for the iPad 2. The 16GB model with wifi (no 3/4G) should meet his needs, unless he wants movies installed (then get the 32GB model).
What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
What are all the differences between the iPad 3rd Gen models? Which should I buy?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
Should I Buy a New iPad? Or an iPad 2?
http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
iPad 3 vs iPad 2 vs iPad 1- Feature comparisons with iOS 5
http://ipadhelp.com/ipad-help/ipad-3-vs-ipad-2/
iPad Q&A
http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
A Few Questions (and Answers) About the New iPad
http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the- new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
New iPad: A Polishing of the Old
http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
iPad 1, 2 and New Specifications
http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
If you think you may get an iPad 2:
Refurbished iPad Prices
http://store.apple.com/us/browse/home/specialdeals/ipad
New 16GB iPad 2 Prices
http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
 Cheers, Tom

Multiple files and locations for the same photos

Hi all~
Hoping someone can help me find a simple solution to my problem. I've been trying to organize my photos on my mac, and I've been taking a lot of time to create albums in iphoto and rearranging all of my files. I got a message this morning that I have little space left on my startup disk, and that I need to delete some files. I suspected immediately that it had something to do with the pictures, so as a test, I searched in Finder for a few of the photo file names, to see how many copies there were. Not surprisingly, there were MULTIPLE copies of the photos, one in my iphotos folder, another in my regular photos folder, and sometimes two in the regular folder. I also had alias files listed in my iphoto albums, but considering the size of those, they are just a link to the real photo file. Is there an easy way to get rid of the dupes, or do I just have to sit and take the time to go through them by hand? Also, is there a better way to upload photos and manage the files, so that I don't have this problem again? Any suggestions would be greatly appreciated.
Thank you,
Noreen

Hi, Noreen. Whenever you import photos into iPhoto's library, they are copied (not moved) from their original locations to locations controlled and managed by iPhoto, in the iPhoto Library folder inside your account's Pictures folder. If the original picture files you imported were located on your hard drive instead of on a camera memory card, CD, or other storage media, then after the import you are storing each image twice on your hard drive: once inside and once outside your iPhoto Library. While there may be some comfort in having two copies of your photos stored that way, it's not a useful backup strategy: if your hard drive fails, both copies are apt to be lost.
Here is a backup strategy that will enable you to recover all your pictures and albums in the event of a primary hard drive failure, and will eliminate the duplication of image files on your primary hard drive. It assumes that you want to use iPhoto to manage and organize all your pictures — an assumption that isn't valid for every user, but works for many.
1) Identify all the images on your hard drive that you haven't yet imported into iPhoto, but that you want to save. You will have to do this manually. Make a list of all their locations as you identify them, so you'll be able to find them again quickly during step 2.
2) Import all those images into iPhoto, and arrange them in albums to suit yourself.
3) Copy your iPhoto Library folder to another storage medium that is large enough to hold the entire folder. Typically, this will need to be another hard drive: internal if your Mac provides space for one; external if it doesn't, or if you don't want to open up the Mac and install another internal drive. Most users' iPhoto Library folders are (or will soon become) too large to fit on a CD; many are too large to fit on a DVD. The absolutely essential point to remember is that to preserve its identity as a functional iPhoto Library, the library folder must be copied to the backup storage medium *as a single, intact unit* — copying it piecemeal or spreading it over several CDs is a path to certain disaster. The contents of that folder are interrelated in ways that only iPhoto understands. Disrupting those relationships by dividing the library into segments destroys all the work you've done to organize your pictures within iPhoto. All that work will have to be laboriously repeated if you alter or break up the structure of the backup library, and then lose your primary library to a hard drive failure or computer theft.
4) Delete all photos from your primary hard drive that are not stored inside the iPhoto Library folder. This eliminates the storage of duplicate copies on that drive and frees up space.
You are now committed to using iPhoto, rather than the Finder's hierarchical folder structures, for the organization and management of all your digital photos. You have no photos that are stored outside the iPhoto Library folder, and for the reasons I described at length under #3 above, you shouldn't use the Finder to meddle in any way with the contents of that folder. Everything you want to do with your pictures from now on can and should be done using the commands and preferences within iPhoto, not manually in the Finder.
Note that the procedure outlined above will, at first, consume more disk space rather than less, as the import process makes new copies inside your iPhoto Library of photos that were formerly stored only outside it. You will later regain duplicated-storage space by deleting all externally-stored images, and if you already had a lot of duplicates before starting this process, you'll probably end up with more available disk space at the end than you have now. But if your available disk space is already minimal now, you may have to take steps to increase it before starting on the process I've outlined. This article may help you do that.
Good luck!

KO88 - Error when settling for Cost Center AND Auc for the same Internal Or

Hi Experts,
We need to configure Investment Internal Orders that could settle to both Cost Center and Auc, but each assignments with different Source Cost Elements
We did the following:
1. Created Auc Class
2. Created Investment Profile "IMOBIL" and assigned to Auc Class, flagging Auc
3. Created Allocation Structure "CV" with two assignments:
01, Source = Cost elements 7000000000 to 7999999999, receiver AUC "by cost element"
02 Source = Cost elements 4000000000 to 4999999999, receiver CTR "by cost element"
4. Created Model Order, filling the Investment Profile IMOBIL created in step 2.
5 Created Settlement Profile ZCV0001, assigning Allocation Strucutre CV, allowing CTR and AUC for receivers, default receiver is "FXA", doc type "AA".
6 Created ORder Type CV01, assigning Settlement Profile ZCV0001.
When I post only for Asset Expenses (Source Cost element 7, Assigment 01), the settlement through KO88 correctly settles to AUC, and also creates the settlement rule for cost center (i'm using the strategy to create from Responsible Cost Center).
But when I post for Asset Expenses (cost elements 7, receiver AUC) AND General Expenses (Source Cost element 4, receiver CTR), KO88 generates an error KD506, saying that for Assigment 02 - AUC I didnt define a settlement cost element.
1. Assignment 02 is not AUC, is CTR;
2. I flagged "by cost element", so I don't need a settlement cost element. And also, I was able to post to AUC when the source posting was only for cost element 7.
Did you face any problem like this?
I cannot find out what is the missing configuration, or if it is a program error...
Kind Regards
Mayumi Blak

Hi Ajay
I already created Source Structure and assigned to my Setllement profile (so I assigned Allocation Structure AND Source Structure).
I don't understand when you say that I need to assign the Source Sutrcture in each rule....because the Source structure is in the Settlement Parameters valid for both rules...
When I post to Asset Expenses only for the internal Order, the 2 rules (CTR and AUC) are created when I run KO88 (but only AUC rule is settled). This is OK.
The problem is when I post for both General Expenses AND Asset Expenses, the system is not recognizing that I have 2 source structures, neither is findind that for CTR AND AUC the Settlement cost elements are the original cost elements.
I'm thinking about changing message KD506 to warning, do you know if this can help?
Kind Regards
Mayumi Blak

Depot Sales - Goods issue not done for the delivery

Hello Experts,
I am trying to capture a Excise Invoice in the Depot Sales Process TCode - J1IJ.
I am getting the follwoing message - GI not done for the Delivery.
Process which we are following here is
Depot
SO - Delivery - Picking - Packing - J1IJ - Shipment creation - Shipment Planning - Loading Start - Shipment Start (Will do PGI) - Shipment end (Will create invoice & Excise Invoice).
Excise invoice is captured during MIGO at Depot.
Can you please suggest..
Thanks & regards
Mahesh

Hi mahesh
Change the process to following manner
Depot
SO - Delivery - Picking - Packing - Shipment creation - Shipment Planning - Loading Start - Shipment Start (Will do PGI) - Shipment end -J1IJ(Will create invoice & Excise Invoice).
u r problem will be solved.
Regards
kedasu.a

Goods issue and backflush for the same component

Similar Messages

Maybe you are looking for