Goods issue MTO

Hi
When i am issuing finished goods to customer for MTO scenario, how does the system know not to pick up standard cost and instead use sales order cost.
I understand that req type > req class in SD settings give the costing variant and hence it gets costed.
Appreciate your help.
Thanks,
Reddy

Hi All,
Thanks for your reply's .
issue : when we are doing goods issue to customer then COGS is posting with standard price in material master however when i check the line item costing in sales order cost is different.
I have checked my requirement class settings
they are acc *** catg : M
valuation strategy :M
Please let me know changes i need to make so that COGS get posted with sales order cost and not standard cost in material master.
Thanks,
Reddy

Similar Messages

No Accounting Document generated for goods issue in case of MTO scenario

Hi all,
I have MTO scenario & the industry is trading. So I have all trading goods. In SPRO - Sales & Distribution - Availability Check and Transfer of Requirements - Transfer of Requirements - Determination Of Requirement Types Using Transaction I have determined requirement type as KE.
In material master I have used strategy group as 20 for Make to order scenario. In the settings "Determination Of Requirement Types Using Transaction" I have determined the requirement type as "KE".
The requirement type "KE" determines a requirement class "040 - MkToOrdNoValW/o cons". Here the account assignment category is "E-Ind. cust. w. KD-CO".
Now I created a sales order, the system determined the requirement type as "KE". I saved the sales order, assigned the stock to the sales order & created a delivery.
I did the PGI also. But when I check in the document flow, for the material document the system has not generated any FI document where we see the accounting document for the "cost of goods sold" & "inventory" G/L accounts. The system gives a message "Material document 4900000023 does not include an accounting document".
Note:
1. When I create the sales order with normal MTS scenario, the system creates an accounting document for the material document at the time of goods issue.
2. The valuation class in the material is 3100 for trading goods.
3. The following settings have been made in OBYC.
for GBB, the G/L accounts have been assigned for general modifier "BSA", "VAX", "VAY" & "VKA".
Please suggest me as to where i am missing any settings.
With best regards,
Niyaz Sayyed.

Dear Niyaz Sayyed
You need to check in the following areas:-
- check whether the material is defined as non-valuated stock
- go to OME9, select your Account Assignment and see whether you have checked the box "GR non-valuated". It should not have been checked
thanks
G. Lakshmipathi

Profit center substitution in Goods issue document

Hello Gurus
I am determining profit center through the profit center substitution in sales order through 0KEM transaction and activated it in 0KEL as activation 3.
I have taken the fields as sales organization and sales office with transaction code VA01 and VL02N .
After this the substitution happening in sales order and also in delivery but the substitution is not reflecting in the goods issue document neither coming for inventory nor in COGS anyway but it is reflecting in the FI accounting document but not for customer but for sales.
Please help me to with your kind suggestion for resolving this issue.
I need the substituted Profit center also to come in the accounting document of PGI and for customer in FI accounting document.
Thanks in advance
Subu

Hi Subbu
1. 0KEM works for sales order and related billing.. It does not work for PGI, unless you are in MTO scenario and sales order is CO object
2. At PGI - Inventory a/c will be Cr with PC in Mat Master... COGS (If not a cost element) will also be Dr with the same PC
If you are in MTO, the COGS will be posted to sales order and hence, it will have the same PC as sales order
3. During Billing, revenue a/c is Cr with PC in sales order... Customer line is never shown with PC in the line item....
- If you are on EC-PCA, you need to run 1KEK at month end...
- If you are on New GL + Doc Splitting, PC will be shown in the "General Ledger View" in customer line item... the "Entry View" wont have any PC
BR,Ajay M

Goods issue of sales order stock

Hi,
We are implementing an MTO scenario. We are not sure what set up is required for goods movements for spl stock E?
The problem we are facing is customer number is not getting populated in Material document during PGI and COPA document?
Also we are using the standard item category ZTAN which is a copy of TAN. Please help us in understanding what set up should be done for handling Sales Order Stock.
Thanks
Chandra

Hi,
Create material (material type FERT) : MM01
Create Sales Order MTO : VA01
Make Sales order BOM : CS61
Create production order : CO08
Goods issue : MIGO/MB1A
Order Confirmation : CO15/Co11N
Deliver the Order : MB31
Deliver the Sales Order : VA02
Make invoice : VL01
The Cycle of Make to order: Steps : MTO Scenario
1. Material Creation (Make To order Material with major changes of: Item Category: 0004-make to order/assem. , or 0001-make to order)
2. Routing Creation
3. Creation of BOM
4. Sales order creation
5. Production order Scheduling, Costing, Release and Save
6. Production order Quantity confirmations for operations, Parallel task of material issue to order or to reservations (261)
7. Calculate WIP
8. Fully Produced Production Quantities will be put into stock (GR) (Spl stock indicator u201CEu201D)
9. Delivery against sales order
10. Invoicing.
11. Settlement that production order
Regards,
Saju.S

No Accounting document generated during Goods Issue

Hi All,
In MTO, when posting Goods Issue during an outbound delivery, no accounting document is generated.
However, the documents get generated during the billing cycle.
In MTS, however, accounting document is generated while posting Goods Issue.
Plz advice.
Anu

A few things you could verify.
Check your SD and FI integration.
Check the amount of the goods issued.
Check the pricing conditions as well.

Sales order -goods issue

hI
1 What is goods issues for sales orders without
account assignment object (the account is not a cost element)
2. What is goods issues for sales orders with
account assignment object (account is a cost element)
Pl explain

If you do goods issue in [MTO] scenario, then the account determination will be based on [KOFK] which is a cost element.
If you do goods issue in [MTS] scenario, then the account determination will be based on [KOFI] which is not a cost element.
thanks
G. Lakshmipathi

Change Delivery Plant in Good Issue

Hello,
Is possible to change the delivery plant in a Good Issue?
Exist some User exit or BAPI to use to change the Good Issue?
Thanks for all,
Nat.

Hi Guiseppe,
can you please answer some questionsa to understand your requirement.
if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

Issue while posting using goods issue for delivery type NL

Hello Experts,
I have created an outbound delivery for an intra-company transfer (within same company code) between two plants. The delivery type in NL (replinishment delivery)
When i am trying to post the goods issue from supplying plant, I am getting following error
"Account type K is not defined for document type WL".
Delivery type NL should not be used to issue stock to vendor but I am not issuing it to any external vendor , issuing the stokc only to a receiving plant.
Please help to understand why i am getting this error.
Regards,
Nish.

Hi,
If you are doing an STO Scenario, Check whether you have created the supplying plant as a vendor.
The Vendor Account group should be plants.
Also check whether you have given the plant in the vendor master Purchasing Data - Extras tab in the menu click on add purchasing data & check.
If you haven't assigned this, do the same & create a fresh STO & check.
Hope it will work.
Thanks & Regards,

Changing the field content of 'wrbtr' in accounting document during Post Goods Issue in VL02N

Hi Experts,
     I have requirement ,where I need to change the 'amount in document currency value (wrbtr)' in line item of a accounting document, which is created as part Post Goods issue through VL02N.
          I have already check BADI's below as follows:-.
1) LE_SHP_GOODSMOVEMENT- No accounting document information flows in this BADI.
2) AC_DOCUMENT - Field 'WRBTR' is not available in substitutable fields list.
3) BTE-1050 - This BTE is not getting triggered while doing PGI.
        Please suggest any other possibilities to make the change.
Thanks & Regards,
Suganth.

Hi Kartik,
            I have checked the enhancement you specified, but it didn't trigger during PGI. Can u please let me know is there any other possibilities to make the change.
Thanks
Suganth.

Goods Receipt / Goods Issue / Transfer Posting

Hi
Scenario:
A pack contains 6 materials of same type but of 3 different colors viz Red:2; Yellow:2; White:2.
I purchase this pack and sell the same pack.
If sales of this pack is not not much, then i do a Goods Issue to a Cost Center. And then i want to do a Goods Receipt into my Inventory as individual items of 6.....2 nos. each of Red, Yellow and White.
How to do GR in to my inventory all the four materials viz:
1. Pack (of 6 material)......ofcourse i am able to do w.r.t PO.
2. Individual entry of all 3 types Red,yellow,white
kindly answer me ASAP
cheers
MaruthiRam

As per your 1st post, it seems that there would be a material code for Pack and 3 material masters for Red, White and Yellow materials (If not then create)
And when you are selling to customer, you are selling the pack not individual material and when you are issuing against cost center, issuing the pack only.
So
GI of Pack; MIGO - Goods Issue > Others (Movement Type 201)
And GR of Red, White and Yellow materials; MIGO - Goods Receipt > Others (Movement Type 202) from Same Cost Center as in GI. Enter Red, White and Yellow materials, plant, storage location, quantity, etc... manually.
The above 2 transactions to be done separately 1st GI and the again go to MIGO and do GR.

Calculation of goods issue date in scheduling agreements with routes

Hello together,
i have a problem with the calculation of goods issue date in scheduling agreements when we use route, because the system ignore the days of transit.
Example:
We had customized the route 4711 with a transit time of 3 days. This route would be related to a scheduling agreement. But this setting has no influence to the calculation of the goods issue date for the schedules. The same happens with loading date and so on.
Can anyone give me a tip, which setting is additional necessary?
Regards
Andreas Walter

Hi,
check the following settings
1, Route determination Path : IMG>sales and distribution>Basic function>Routes>Route determination
2, Activate the route Determination for your sales document type in following path :IMG>sales and distribution>Basic function>Routes>Route Schedule Determination-->Schedule with route schedule for sales document type
3, Maintain Delivery scheduling and transportation scheduling in the following path:IMG>sales and distribution>Basic function>Delivery scheduling and transportation scheduling>Maintain Duration
Regards
Senya

Profit Centre Document issue at the time of Post Goods Issue on SD.

Dear Experts,
While SD person is posting Post Goods Issue, System is generating Profit Centre Document along with other documents. We are facing an issue with Profit Centre document here and the issue is:
Some Profit Centre Documents are populating Delivery Order Number on respective field while some are not. Ideally all profit centre line items should show Delivery Order Numbers.
Please guide any solution to resolve this issue, its urgent.
Thanks in Advance.
Regards,
Zain Bashir

Hi Zain
This is a tricky issue
Are you saying that the PCA document has the Delivery Number (VL01N) updated in some cases and not updated in some cases?
The Delivery Number is updated in PCA document when you create Delivery from VL01N and do PGI from VL02N
But, if you do PGI from VL01N itself, then the delivery number is not updated in the PCA document
SAP recommends to post PGI from VL02N
Br. Ajay M

How to change movement type of Delivery goods issue?

Hi all!
I need to change the movement type used by posting Goods Issue in an outbound delivery (tcode VL02N).
Please provide some instructions or cookbooks on how to do the configuration..
Thanks a lot!

Hi,
Get the Schedule Line Category used in Sales order. Go to VA03, here double click on the sales order line item and go to "Schedule Lines" tab, here get the Schedule Line category.
And then go to VOV6 and double click the Schedule Line category and in detailed screen, change the movement type.
Then try for Delivery and PGI.

Different GOGS GL account for goods issue

Hello SAP export,
The F&A department requests to generate different COGS GL account based on Customer Account Assignment Group when goods issue (or billing). Customer Account Assignment Group field name is KNVV-KTGRD. The solution is NOT possible at T-CODE OBYC (with GBB transaction (MM FI configuration for goods issue) because we are using the same materials. (All materials are with same valuation class in MATERIAL master).
I had posted this question in SD forums but the export suggests me to post in FI forum.
If you know any workable solution, please help.
Great thanks in the advance!

Hi,
Check the link for how to have default a G/L account on a Purchase Order account assignment for an inventory item & how to post to a separate G/L account for inventory item by having GR posting
http://www.bluemarlinsys.com/ns/0603-03.asp
OR
you can have a thought of having different valuation grouping codes where you can have different G/L posting with respect to plant for same materiel
valuation grouping code........valuation area
0001......................................P001(plant-1)
0002----
P002(plant-2)
Regards,
Biju K

COST GL account when goods issue - enhancement or user exist

Hello SAP exports,
There is a requirement from F&A department for different COGS GL account based on Customer Account Assignment Group value when goods issues (GI) (goods movement). Customer Account Assignment Group field name is KNVV-KTGRD.   The solution is NOT possible for standard SAP SD (pricing procedure) / MM (T-Code:OBYC with GBB).    Therefore, I am searching solution for enhancement.
the requirement is like following:
KNVV-KTGRD                                   COGS GL account at goods issue
01                    Domestic                   818100
02                    Export                       818200
03                    Testing - sample         818300
04                    Testing - VOM            818400
05                    Franchise                   818500
Can you please let me know what and how this can be resolve by enhancement or user exist?
Thank you.
Kind Regards,
Sylvia Chen

Hello,
The requirement is to provide different COGS GL account based on the Customer Account Assignment Group value(KNVV-KTGRD) when SAP performs goods issue. for example, movement type 601,
This means, when company ships goods to differnt customers, then SAP should generate different COGS GL account.
for example, when company ships goods to customer account assignment group '01' (Domestic customers), then SAP should generate COGS GL account 818100.
when company ships goods to customer account assignment group '02' (export customes), then SAP should generate COGS GL account 818200.
when company ships goods to customer account assignment group '03' (Testing - sample customers), then SAP should generate COGS GL account 818300.
the logic is following:
KNVV-KTGRD              COGS GL account at goods issue
01 Domestic                 818100
02 Export                     818200
03 Testing - sample      818300
04 Testing - VOM         818400
05 Franchise                818500
I am not good at user exist.
Can you please provide solution with step-by-step guide?
Thank you.
Regards,
Sylvia Chen

Goods issue MTO

Similar Messages

Maybe you are looking for