Goods issue print preview issue

Hi
I have created stock transport order,goods issue in mb11 tcode 351 movement type,in mb90 tcode print preview shown only transferred from site details only,transferred to details of plant not shown,plz help
Regards
sam

Hi,
Contact ur abaper to change smart form.
Arun

Similar Messages

  • Regarding Smart Form Printing, Print Preview issues

    Hi,
    I have couple of issues regarding Smart Form Printing, Print Preview.
    In my program i am passing below parameters to smart form function module:
    t_control-device = c_printer.
    t_control-no_dialog = space.
    t_control-preview = space.
    t_control-no_dialog = c_x.
    t_output-tddest = g_spld.
    t_output-tdimmed = c_x. " Print Immediately
    t_output-tddelete = space. " Don't Release spool after output
    g_user_settings = c_x.
    Issue#1: Though i have set preview paramter to space, after executing program it is prompting for Preview Screen, There again i have to give printer name though i am passing printer name as above and i need to hit on print preview button to set Layout output.
    Here how can i go directly to layout output without preview screen.
    Issue#2: In some cases we need to Print the layout set output after executing program immediately without prompting for preview screen and then Layout set output should also be shown after printing the output.
    How can i solve these issues!
    Thanks in advance.
    Thanks,
    Deep.

    Hi,
    In the SAP menu screen goto <b>System->User Profile->Own data</b>
    There in the defaults tab, for the output device give the value you had maintained for <b>g_spld.</b> This will not prompt you a dialog screen, and if you want to print immediately select the checkbox as well. Then try to execute the smartform. Hope this solves ur issue.
    Tushar

  • Print preview issue for amendment purchase order

    Hi
    Whenever i have created po in me21n t.code for two materials that time my outputype neu coming automaticaly and po print out also come for two materials in me9f .
    Supoose i have change quantity in me22n t.code for first line item for same po that time also neu coming automatically.but in   me9f coming printout first line item only,after that  po quantity changed available text in print preview,second line item material not comes,i need second line material also in print preview,plz help.
    Following configurations are completed for my output type(NEU) automatic generation in ME21N t.code and ME22N t.code
    in nace t.code EF purchase order for my condition records NEU for my document type nb and my vendor vn and message transsmission medium 5, dispatch time 3,language En,and my communication output device HP and save it
    SPRO-IMG-MM-PURCHASING-MESSAGES-MESSAGE TYPES-DEFINE MESSAGE TYPES FOR PURCHASE ORDER-FINED TUNED CONTROL PURCHASE ORDER-operation 1 for neu automatic generation in me21n, then operation  2 for neu automatic generation  in me22n.
    Regards
    Sam
    Edited by: sadaraji on Apr 15, 2011 3:50 PM
    Edited by: sadaraji on Apr 15, 2011 3:53 PM

    Hi,
      One thing you can do is, create a GUI Status resembleing the current GUI status, except the Print Prieview Button.Ans set the GUI Status before calling the Transaction in BADI or User Exit.
    Thanks & Regards,
    Vamsi.

  • Print preview issue

    Hi ,
    while clicking print preview , the system is showing below said message
    ( proper output type is assigned )
    No print-relevant changes to document 2200000149 exist
    Message no. ME140
    what setting is required in PO

    Hi,
    Chcek the setting for your OUTPUT TYPE in NACE t.code for appplication EF. Also check program , form & routine for OUTPUT TYPE .Also check the despatch time setting for the put type.
    Also check the  transmission medium  in condition record for your output type MN04/MN05 . 
    Regards,
    Biju K

  • Print preview issue with invoice script

    Hi folks
    i am working on preparing UTP for a invoice script(modification of standard one).
    here when i am running the billing document number in VF02 i am not able to see the print preview.
    i would like to know what should i do on this as i need a printpreview to prepare  UTP on this layout.
    when i select the message type(output type) of that layout and press the option print preview nothing is happening.
    when i say print in the status bar it is giving success message and when i saw in the spool the status is in waiting.
    can anyone let me know what i need to do ?
    thanks in advance

    Hi
    Do u know the o/p type  of the script ?
    if not ist see the out put type by going to Tcode NACE
    after thatjust go through the steps...
    1 vf02 > give a doc no-> enter
    2
    from menue bar chose GOTO> Header> output
    3.
    now give the output type . medium -> printout press enter
    4
    save and go bck to 1st screen of vf02
    from menue bar chose billing document--> issueoutput type
    chose select the printout and select print preview.
    rewards if useful
    Regards
    Sachhi

  • Print Preview issue related to Purchase Order

    HI,
    I am working on purchase order printout. For the creation of P.O. I have worked on printout ad its working fine. As comes to change purchase order, client is using same output type and if they take the printout its coming as
    Amendment to P.O. (In case creation of new purchase order printout Its coming as Purchase order only.) And in the change purchase order printout, its showing the items changed(But in print preview i am able to see the the new created purchase order only....not the changed purchase order print preview)..
    How can I see the change purchase order print preview?..so that I can make the changes as per the client requirement.
    Thanks,
    Kishore

    Kalyan,
    This is possible provided you have mantained Individual Capacity Defination in the Capacity header of the work center. Since yours is Labour you need to assign the person to the Individual capacity details for Machine you can define your own naming. With this you should be able to confirm every product with referance to the Individual Machine.
    Since you are using Serial Numbers, I assume that GR you are doing using transaction MB31 or MIGO, where you can assign the Serial Number to the material.
    Regards,
    Prasobh

  • Delivery output print preview issue.

    Hello Friends,
    While going for the print preview of the outbound delivery by T-code VL71 i am getting the message-->
    "Output could not be displayed (it may not be complete)
    Message no. VN069"
    As i have maintained VV21 & output type in the delivery.
    Please help me with the solution.
    Thank you.
    Sadanand.

    hi
    did u maintained the output type in NACE for appliacation V2
    and also check whether u have maintained the custom form in smartforms place
    Output type LD00
    trans medium : 1
    short tecxt : print out
    Program ; RLE_DELNOTE
    FORM routine : ENTRY
    smartforms : ur z form
    trans medium : 2
    short text : fax
    Program ; RLE_DELNOTE
    FORM routine : ENTRY
    smartforms : LE_SHP_DELNOTE
    hopre this would sove ur problem.
    Regards,
    Venkat.
    Edited by: venkatakrishnan Parthsarathy on Apr 14, 2008 2:40 PM

  • Output Type - Print Preview issue

    Dear Friends,
    I have an Output Type which when seen in the output preview / printing of billing doc shows the PO No. along with the other data.
    The Output Type picks up the Sales Order no. from the table VBFA based on the billing doc no. and collects the preceding doc no. This preceding doc i.e. the Sales Order doc no. is then passed in the VBKD table along with the line item no. of the billing doc. and then the PO No. maintained at the item level is picked up from the field BSTKD by matching it with the line item no. of the Sales Order Doc No.
    Now, I am facing a problem where when the PO No at the header level and the PO No of all the Item levels are same at the Sales Order doc, the output preview does not display the PO No. in the Output preview / print. This happens with only those sales order doc where the header level PO No. and Item level PO No. are the same. For rest other docs, things are running smooth.
    Kindly suggest me with some solution.
    Regards
    Vineet Jain

    When business data is the same on header and items, VBKD does not contain any lines for the items - it only contains a single line for the header where the item number is initial.  This fails your logic of looking up VBKD by line numbers.
    Edited by: Keerthi Hiremath on May 29, 2008 9:00 AM

  • Firefox print preview

    This is not a question, it is more of a statement of a Print Preview issue in Firefox 4.01 and 3.6.
    When using min-height styling on a webpage, if an element (any element) extends beyond one page while using print-preview, then the element stretches AGAIN to that min-height on the second page.. In other words, min-height is re-applied, even though the element may already be that greater than that min-height.

    Haha, Mr. Smarty Pants, that is pretty much exactly what we ended up doing :) Very quick answer, though, nice stuff. It took us about a half hour so of testing to find out what was causing this issue though... we couldn't figure out why the table was extending so far until I did a print screenshot and measured it in Paint and was able to connect the dots.
    (edit)
    Preferably, rather than doing special, kooky css that i hope looks right, maybe Firefox can fix this.. I probably should have pushed this somewhere else.. it was just difficult for me to find the bug submit area.

  • Unable to print / preview the invoice

    Hi Friends,
    I am unable to print / preview the invoice output i.e in VF02 > Billing Document Tab> Issue--> print preview, there is no response from the system inspite of output being assigned.
    When I tried to Check the same in VF31 T.code the message is " Message Cannot be processed: objects(s) blocked" . and the message No is " VN073"
    Regds
    Rajiv

    Hi Rajiv,
    This is an authorisation issue. Please ask your BASIS person to check your user authorisation for billing related programs. This will help you.
    Award points if useful.
    Regards,
    Emaya

  • Print preview invoice issue for a parcular invoice in vf03

    Hi,
    I am facing an issue with the print preview invoice. I have 2 billing document nos., for billing document 3117101008 when I go to "Billing Document"->"Issue to output"-> and click on "print preview" I get an output, but for the other billing document 3117101007 when I click on "Print preview" nothing happens, it just keeps on loading and everything gets hanged.
    Do I need to do any modifications in my custom include "YV0023INV_PRINT_F01" or is there anything linked with the header details table 'IT_HU_HEAD'.
    Please advise, appreciate your efforts.
    Thanks

    Hello Bawneet,
    Are you facing this issue only to this billing document ?
    Did you check the same for 1008 billing document ? First try to open 1007 and then next open 1008 document, here please check are you facing the same issue like screen keeps on loading issue.
    Please check this and come back with your issues.
    Thanks & Regards,
    Lakshmi S

  • Issue Regarding Chinese characters In Smart Form Print preview..

    Hi All,
    I am working on a smart form development for chinese users. The requirement is the user will login using English & when the delivery will be issued for output, a check will be done on the country of user. If that comes as china then the international version (C) maintained for that customer will come as output.
    Now the problem is even if I login using EN or ZH the below issue I am facing always.
    In the database I can view the details in chinese properly by logging in as ZH. During debugging also i checked the data from table ADRC & MAKT is coming in chinese properly. But when i gave the values to be output in SmartForm, it is showing the characters like how it will look if I login using EN & view the table contents.
    When i view the data by changing character set as Simplified Chinese then in table i can see chinese texts properly. But when the same data goes to print preview it shows the chinese characters like as it would appear when character set is Unicode or West European..
    Please help..
    Thanks in advance.
    Edited by: malayanayak123 on Jun 1, 2011 5:48 AM

    Dear,
    print preview and physical printout are two different things.
    PrintPreview:
    The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
    Printout:
    Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
    Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
    If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
    Regards,
    Christian

  • Issue with ALV grid print preview/spool

    Hello everyone,
    I am working on a report and I am having some issues with ALV grid. Currently in our DEV and QA environments the user can run the report, view the ALV grid, and print the grid without any issues.
    However this isn't the case in the Prod environment. The user is able to run the report and view the grid without any issues. But when they click print preview or click print, the spool is incorrect. It shows the proper values from the grid, but the first field is reduced in length. Rather than showing a numeric field of length 10 it shows 99999999# or 99999999...
    The programs are identical through every environment, including user parameters, formats, and spool settings. I have been told printing grids may have some issues, does anyone have any advice or dealt with this issue before?
    I appreciate the help.
    Thanks,
    C

    I was waiting to hear from the functional team on the matter and no one has mentioned any more issues.  I am assuming the problem is solved.  I just noticed the thread was still un-answered and wanted to give an update. 
    Thank you for you help Vijay.
    Regards
    C

  • Issue in viewing 'Print Preview' of SAPScript output in different languages

    Hi All,
    I have developed a SAP Script.
    It is working correctly in English in all aspects.
    I have created few standard texts for headers in SO10 and maintained in different languages.
    In Print program also while retrieving these text i have used Order's language.
    In debug mode also it is showing texts in different language (Chinese, Japanese, Thai etc...).
    But in print preview it is showing as # every where we suppose to print headers from standard texts.
    How can i view these texts in their original language (Order)!
    Can anybody provide the solution for the same!
    Thanks in advance.
    Thanks,
    Deep.

    Hi,
    I have selected 'Supplemental language support' boxes.
    But still it is not working.
    Can anybody solve above posted issue!
    In PO it is showing in Japanese/Chinese etc.. characters.
    In SO10 it is showing texts in respective languiages.
    In debug mode of Print program & Layout set text is shown in respective language of text based on country of PO.
    But in print preview it is showing as # everywhere there must text in different language.
    Only in English i am able to view print preview correctly.
    Can anybody provide inputs for resolving this issue!
    Thanks in advance.
    Thanks,
    Deep.

  • Issue While printing / Previewing a Adobe form in Web Dynpro ABAP application

    Dear All,
    We have designed 4 different adobe forms using SFP transaction for 4 different countries in SAP system.
    Every country have different terms and conditions and therefore we have placed static texts (Hardcoded text) with text in different styles. Some text is in bold, some in different font (Bold, Italic). Font and Paragraph settings of the text was done as per expected. All the forms have same font and paragraph settings.
    When we Launch Web Dynpro ABAP application to open the form in Print preview or to take print, form is not getting displayed / printed as it is designed in SFP. But if you open the form in SFP, everything looks fine.
    It is working fine for 3 different forms but problem with only 1 form.
    Kindly guide what is the reason for this strange issue when previewed or taken print. It is very urgent.
    Thanks,
    Bharath.K

    Dear All,
    Thanks for your responses.
    We had identified the reason.
    Customer has provided terms and conditions for all 4 countries in PDF document. Along with PDF, for 3 out of 4 countries customer has shared pre-prepared word document with pre aligned and justified terms and conditions as per expected outcome. We copied this text from word to Adobe form layout. It worked fine. For 1 country, customer have not shared terms and conditions in word document. Therefore we had copied text directly from adobe PDF document in to Form layout. Then this issue happened.
    Solution for this issue is to, prepared a word document with expected alignment and justification of terms and conditions text . Then copied from word to adobe livecycle designer form layout. It worked fine.
    Thanks,
    Bharath.

Maybe you are looking for