Goods Issue reversal with 262

Dear Friends,
Is there any exit to have the same batch number while reversing GI for partial quantity with 262 movement in MB1A which was used in case of 261 movement for Goods Issue against the process order.
Kindly share your valuable viewpoints for the issue.
Thanks in advance.
Regards,
Tejas

Hi,
Thanks for your prompt reply.But is it feasible to bring same batch no in 262 which was used in 261? See that constraint is already there when multiple batches are issued. But I just wanted to know whether it is possible atleast in case of single batch issued which we can fetch from material document of 261.I have tried but I am unable to find any exit which can work for this purpose.
If any exit is there then I can further think about multiple batch issue case because at this stage, without knowing exit also I cant go ahead for the same.
Further material document reversal will not work since user's requirement is for partial reversal because they are not fully reversing the full GI qty. They are always reversing partial qty mainly.
Hope you understand my problem.
Regards,
Tejas
Edited by: Tejas Pujara on Oct 7, 2009 12:55 PM

Similar Messages

BADI or User Exit for Post Goods Issue Reverse (VL09)

Hi,
Could you please let me know any BADI/User Exit which will trigger while doing Post Goods Issue Reverse through VL09 transaction.
Thanks,
Sandeep

Hello,
If you can be specific about your requirement, then response can be better.
Still, check with following Exit:
- V50R0001 Collective processing for delivery creation
- V50R0002 Collective processing for delivery creation
- VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
- VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
- V50S0001 User Exits for Delivery Processing
Thanks & Regards
JP

MB26 ,CO27 - goods issue components with serial number?

Hi ,everyone!
I know CO27 and MB26 can do goods issue to production order very easily and quickly!
But It seems CO27 and MB26 can not work well with the component with serial number.
I aslo know MB1A and MB1B can post goods issue for component with serial number.But in MB1A and MB11 , it is very difficult to can material by material number quickly while doing more then 100 components issue to one production order.
And for authorization purpose we restrict MIGO not to use goods issue for production order.
So I want to ask how CO27 and MB26 do goods issue for the component with serial number?
Or there is another ways to goods issue component with serial number to production order easily,exclude MB1A,MB11 and MIGO?
Thanks for any reply!

Hi Vivek
We use CO27 for goods issue to production order ,just like MB1A goods issue to production order.
But in the BOM components of the production orders ,some semi finished products are with with serial numbers ,so we can not use CO27 or MB26 to issue these components with serial numbers to production orders!

Good issue Reverse

Dear all,
I am confused that how we can reverse mb1a(261) which we issue to production .
Regards,
Olet malla

Hi,
Reverse the quantity of material against this production order using the movement type 262.
If you want to reverse a goods issue in t-code MB1A, please make sure that you use the following menu path:
"Goods Issue -> Cancel w. reference -> To Order / To Reservation"
If you don't follow this path but just enter the 262 and the order number (as accounting object) the reversal will not be carried out with reference leading to non-updated reservation data.
While reversing the material document - check the posting date the date on which you reverse the material document ,the system will show the stock reversed in that day only.
Once you done the reversal document number will get generate ,then got to MB03 and confirm whether your reversal happens correctly or not.There your movement type should be 262.
Regards
Anand

STO Post goods issue reversal using vl09 not happening.

hi
user has done following cycle
1.ME21N-PO document type UB and Item cat I.
2.VL10B- Outbound delivery
3.VL06G-goods issue using automatic MVT 647 and 101)
4.VF01-Performa Invoice(billing Type JEX)
5.J1IIN- Excise invoice.
In billing base price is missing because of that all duties and net price zero.now user wants to cancel entire cycle. he has done excise cancellation using J1IH. we are not able to reverse billing using VF11, we are not able to PGI reversal using Vl09. it giving error "No dat available for your selection".
Note: is it problem of JEX because we have not assigned cancell billing type and doc pric procedure to JEX?
any solution for the above issue.

the optional solution can be as following steps:
1) create the bin manually with ls01n: storage type 904, bin name is the delivery number,
2) reverse with vl09 and a material doc will be created.
3) check the bin stock with ls24, you will see negative stock in 904.
4) create TO to offset this negative qty with lt06 with above mentioned material doc. this TO's source bin is just the one in regular storage type.
5) confirm TO
6) don't forget to delete the bin created in step 1, this is because it is created manually but not dynamic bin that will dissapear automatically.
pls reward if helpful.

Regarding goods issue (reversal) against process order

Dear friends,
Recently i have noticed one strange thing in SAP.I have created one process order and against it i have done the confirmation.Now when i go to Transaction code mb1a and select movement type 262 (Goods Issue to process order-reversal) and give the storage location and in next screen i gave order number,material code and its qty.These material code is not maintained in the bom of order header material.And even in process order in material tab we haven't maintained this material.Also while doing the confirmation in goods movement we haven't maintained this material.Then also system allows me to do so.Which means material which i haven't issued against the process order, system is allowing me to do its reversal i.e (262).because of which system is creating the stock for that material, which is not correct.
Can we control this behaviour of system.
Thanking you guys in advance.

Hi Jitendra,
This is fact and there is no standard Control available for the same.Only thing you can do is put control over Movement type 262 or try it by implementing User Exit.
I am not sure but you can use Enhancement CCOWB001 - Customer exit for modifying menu entries.
Include is LXCOWBF01.
Regards,
Dhaval

Goods issue reversal

hi experts,
GR wrt Prod Order was done.As QM is active stock received as QI stock.
During usage decision , "xx" qty was posted for SAMPLE USAGE, by mistake.
I checked in MB51, one mat doc is created with movt type 331.
I tried to cancel this doc through MBST & MIGO, but system gives error "this doc can not be processed"
I want to reverse this goods issue for sample. pls guide me
regards
rahul

Hi,
To reverse the Quality transaction it is not possible in MIGO or MB1A.
For that you can do it in MB1B transaction with reversal of 331 movement type that is 332.
Before going to do this transaction in material master you have to asssign the inspection type 08- stock transfer posting in Quality management view.
then you have to create the inspection plan for the material with the inspection type & usage 08.
After creating this.
Now the system will allow you to reverse through MB1B with 332 movement type.Specify material quantity manually.
then post the document,the inspection lot will be generated in this case now clear the inspection lot with proper movement type.
that is if you do 332 then the system create inspection lot & make it to original state before you do 331 movement type.
Make the setting in Spro for the inspection type Quality Management--Quality Inspection-Inspection Lot Creation----Inspection for Goods Movements.
Regards,
Raj.

Goods Issue reversed without cancelling Bill & Excise Invoice

Dear..........
One of my end user has reversed the goods issue and deleted the line item also in case of Stock Transport Order. The billing document and Excise document is as it is there. Delivery document is also there but line item is deleted. Is there a way to restructure the scenario so that the document flow could be stream lined.**
Thanks in Advance.
Indranil Chatterjee.

Hii
First of all check whether billing line item is referenced from your delivery or not, As per my understanding if PGI have been done and delivery line item status is complete it became gray and do not allow to delete the line item. If the same is not referenced and PGI have not done then u can delete the same.
I know there is an loop hole in standard SAP where it allow to cancel commercial invoice without canceling excise invoice.
for the same i have develop the logic which may be useful in your case.
1)     For the given Exit EXIT_SAPLV60A_002 an Enhancement V60A0001 is assigned and in this
INCLUDE ZXV60AU01 is used to develop the Logic.
2)     Based on the input entered in the VF-11 transaction we will check if corresponding records exist in J_1IEXCHDR table and if records found we will move these records to an internal table i_exerinv .
3)     If no records fetched into internal table we will allow the transaction to execute.
4)     If records fetched in to the internal table then if Status is other than the B or D or R then also we will allow the transaction.
Hope it will help u
thanks and regards
Shambhu Sarkar

Goods issue reversal of pallet

Hello,
Can some one tell me the transaction for reversing goods issue of a pallet please?
The pallet is empty and goods issue status did not update when goods issue of delivery was reversed.
HU status 0050 posted for goods issue
need to change status of pallet to delete
Edit: this is for HU managed shipment/delivery
Edited by: Arakish on Apr 21, 2010 6:18 PM

No, but they may be used next time...they decided to ship as is and do work around this time
marking as resolved, thanks for the responce

Goods Issue link with SD

Hi Experts,
I have a requirement to extract data from goods issue (MSEG, MKPF). However there's a need to determine fields like Sold-Tos and Ship-Tos which can only be found in sales document. Are there any means in connecting/linking Goods issue to SD? Thanks!
Best Regards,
Kurtt

Hi,
Check in MKPF Table, Material Documents with Field Trans./Ev. Type having value as WL i.e. Goods Issue for Delivery will be for SD Delivery. Also you can have field Transaction Code having value as VL01N, VL10B, VL10D, etc... if for SD Delivery.
Also in table MKPF, in field "XBLNR" (i.e. Reference Document Number), it populates the Delivery Document No ( VBELN ), get this No and then pass this to tables LIKP and LIPS and get the necessary details.

Post Goods Receipt Reversal with VL09 for customer returns in WM

Hi,
We have performed Goods receipt and stock was putaway with a TO confirmation in WM. Now we want to reverse the goods receipt and the quantity is not in 904 area for returns. How can I get the stock back to 904 from regular storage type with same dynamic bin number as my customer return delivery number? Basically When I do VL09 system complains that it canot find the dynamic bin number which is same as my delivery number. Answer will be rewarded.
thanks,
Sarvesh

the optional solution can be as following steps:
1) create the bin manually with ls01n: storage type 904, bin name is the delivery number,
2) reverse with vl09 and a material doc will be created.
3) check the bin stock with ls24, you will see negative stock in 904.
4) create TO to offset this negative qty with lt06 with above mentioned material doc. this TO's source bin is just the one in regular storage type.
5) confirm TO
6) don't forget to delete the bin created in step 1, this is because it is created manually but not dynamic bin that will dissapear automatically.
pls reward if helpful.

Restriction of goods reversal with 262 mvt type in MIGO

Hi,
During goods reversal using mvt type 262 with reference to a production order, we are able reverse any amt of qty, I want to restrict the reversal to the extent of other than confirmed qty.
Eg. Order qty 10 EA, GI done 10 EA (BOM 1:1), confirmed qty 5 EA. I should be able to reverse only 5 EA or less and not more, as 5 EA already consumed.
Regards,
Jagadeesh.

Jagadeesh,
This check can only be possible using user exit "EXIT_SAPMM07M_001" of Enhancement MBCF0002, you can write your logic in Include ZXMBCU02.
Regards,
Prasobh

Goods Issue Reversal( HUM)

Hi,
I need to reverse the PGI, and then delete the outbound delivery . I was unable to reverse the outbound delivery through VL09 Trsnasction. I am getting message that HU has been changed, reversal not possible. This is a HU and WM managed location.
Thanks,
Sridhar

Hi,
Do you still have the issue?
You may go to space
SAP ERP Sales and Distribution (SAP SD) in Enterprise Resource Planning (SAP ERP)
where you can get more help from ERP experts for this area.
Regards,
Claire

Goods Issue Stock with serial number to asset

Hi xperts,
When i GI a stock with serial number to asset (mvmt 241), the serial number is not updated in the asset master. I believe it's due to the asset number has been created before the GI. Is there any way (BADI or user exit) that would allow the serial number to be updated in the asset master after/during GI postings.
Thanks in advance.

HI,
The serial number is not updated in the asset master & there is no user exit for updating the same . You need to maintain it manually in the Asset master through Tcode AS02. Then after that do the GI,then the serial number would get updated automatically when you manually enter Asset code under account assignment tab.
Regards
Manish Joshi

Goods Issues done with Purchase Price and not MAP

I would like to know on the inventory valuation from moving average price (MAP)/ average the inventory value to First In First Out (FIFO) basis.
FIFO basis is where assumption made that inventory being sold is based on first come first serve basis i.e.
For example you have 1 pc of pen valued at RM 1 and then you buy another pen valued at RM 1.50, your total inventory value would be RM 2.50.
In FIFO basis, if you sold 1 pc of pen then the product cost will be RM 1.00 (i.e. purchase price) as it deemed that the first pen make a way first.
However, in MAP basis, if you sold 1 pc of pen, the product cost would be RM 1.25 as it average cost of both pen.
I have tried using the FIFO rules but it will only take the purchase price if the issuance/sales were done within the same posting period as the GR. If I were to make a GI in the current period, it will not take the purchase price but instead it will be MAP. And then there will be concern if the stocks were available across periods.
Really appreciate any ideas that you may be it standard customizing or enhancements required.

Hi
If you want to apply FIFO rules in real-time basis (day to day operation), then my advice is you should use Batch Management and Batch Valuation features in SAP
If you activate Batch Management with Valuation, then every GR will be valuated differently
For example,
GR 1 on July 01, 2011 - 100 pcs @RM1.00 (batch 001)
GR 2 on July 03, 2011 - 100 pcs @RM1.50 (batch 002)
Then there is GI happening, for example :
GI 1 on July 04, 2011 - 10 pcs
In normal circumstances (without Batch Management), SAP will take the MAP (which is RM1.25) as the price of GI
But if you activate Batch Management with valuation, then you need to specify that you will do GI for batch 001, and SAP will take the price of RM1.00 as the GI price
To ensure FIFO principle, you can also use Batch Determination feature, and make SAP to propose the oldest batch when doing GI transaction in MIGO
Hope that helps
rgds

Goods Issue reversal with 262

Similar Messages

Maybe you are looking for