Goods Issue to other Company Code
Hi, is it possible to Goods issue to a plant under a different company code?
Hi Angela,
To set up Intercomopany process you need to do following config,
1. Go to SPRO --- MM --- Purchasing -
Purchase order -
Set up Stock Transport order
2. Firest step is to define shipping data for plants, here you have set rthe data for both the plants who are doing transaction.
For eg. XYZ1 as supplying plant & ABC1 as receiving plant are the two plants from company code XYZ & ABC respectively
Set data for plant XYZ1 as give the value of sales organization for eg for XYZ company sales organization XYZS will be responsible & other data as distribution channel & division.
Se the data same way for plant XYZ1 also with sales area of company code XYZ.
3. Second step is to assign delivery type to supplying plant & document type that should be NLCC and as per our example it is to supplying plant XYZ1 & doc type NB.
4. Next step is optional whether you want to use one step procedure or two step procedure.
5. You need to set up master data alaso such as XYZ1 to be set up as vendor in company code ABC, one point to note is in EXTRAS from MENU BAR in ADDTIONAL DATA you need to give data retention level as plant XYZ1.
6. You need to set up receiving plant ABC1 as customer in company code XYZ.
With this minimum requirement you can set up Intercompany process with delivery.
Process will be as follow,
1.Create Intercompany Purchase order with vendor as XYZ1 & plant as ABC1 from receiving plant.
2.Process Outbound deleivery with VL10D
3. Post Goods Issue from supplying plant.
4. Post Good receipt in receiving plant.
5. Post billing invoice VF01 from supplying company code XYZ w.r.t delivery.
6.Post Invoice receipt in receing company code.
Hope the above clarification will be helpful to you.
Thanks,
Charu
Similar Messages
-
Issue with Cross-Company code transactions and Extended Withholding tax
Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting GL Co Code
Dr 106520(Exp) 1000
Cr 202020(Bank) 5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu -
Deleting other Company Code data
Hello
Has anyone any good experience in deleting other Company Code datas. We had in mind archiving but seems it is more like"mission impossible" due to many opened documents whivch prevent to come to the customer in order to be deleted.
I know SAP SLO service, but it is much too expensive. Also we are not such perfectionist as they are.
Does anyone knows some product which could help us in this regads
Thank you in advance
JanHi Jan,
You can use SAP Landscape transformation tool .Refer to SAP help for more details on the same.
Deletion of a Company Code - Overview of SAP Landscape Transformation - SAP Library
Additional information can be found in below SCN thread
How to delete a Company Code with all custumizings?
Hope this helps.
Regards,
Deepak Kori -
Transfer of Customer Open Line Item to other Company Code.
Hi Experts,
I have a scenario where my client want to tranfer the Customer Line item(open item) to other company code? How can i do that?
i.e : My client are having two company codes 1000 and 2000. they are having same customer in both company code, now they want to transfer customer line item from company code 1000 to company code 2000. Please tell me how can i do that without using cross company code transaction. because my client dont want to use cross company code transaction here....please suggest alternate way to do that?
Regards,
Sam.Hi
you can use the system make the transfer posting with or without clearing.
To do so, choose Document entry-> Other -> Intern.transf.psting -> With clearing or Without clearing from the Accounts
Receivable menu:
From the Accounts Receivable screen, select Document entry and then the accounting transaction.
Enter and post the document as usual.
Please check by testing.
Reg
Suresh -
Employee as a vendor in other company code
Dear Guru's
I wanted to know whether it is possible for a employee master of one company code creates employee as a vendor in other company code. How?
Thanks in Advance,
SandeepHi,
We are using Transaction Code PRAA to create employee vendors in the current company code. However there is another company code also implementated for a trust of which all employees are members of.
The requirement is to create Employee vendors in both the company code using SAP standard functionality as provided by PRAA tcode.
Regards
Sandeep -
ABAP runtime errors during customer extension to other company code
Hi,
I have created one customer in company code 1111 with tcode XD01.
When i am trying to create the same customer in the other company codes 2222,3333, and 4444, with tcode FD15, system is giving runtime errors like below.
The following syntax error occurred in the program RFBIDE20
"Field "BSZA1_D0100-MOB_NUMBER" is unknown. It is neither in one of the"
Error in ABAP application program.
The current ABAP program "RFBIDE10" had to be terminated because one of the
statements could not be executed
*This is probably due to an error in the ABAP program *
Could anyone help me out in this regard.
Thanks,
Srinu.Hi
Check SAP Note - 757821
Thank You, -
Derivation Rules Not Working for other company codes
Hi,
I have 5 Company codes and only for one FM was activated. now i want to activate FM for all 5 company codes. for which i have assigned the FM area to all 5 company codes. I have also assigned the derivation strategy to all 5 company codes as well. now when i post a transaction for any other company code derivation rules is not being process hence no commitment item or fund center is derived. however for the original company code for which FM was activated in the first derivation rule are working fine means system is deriving commitment item and fund center. can any one tell me why derivation rules are not working for other company codes? do i have to add Company code in source field of derivation strategy? could this be the reason? because in beginning there was no other company code so we did not included any company code field in the first place.
Regards,Faizan,
Go to Funds Management Government> Actual and Commitment Update/Integration> Activate/Deactivate Funds Management.
In the screen create an entry for each Company Code and Funds Management Area combination.
Activate the AA Derivtn flag if you want the derivation to be called and the Update flag if you want to update commitments and actuals in FM.
Thanks
Shyam -
Copy GL Master Data to Other Company Codes
I am trying to us FS15 to send GL Master Data over to other company codes (65 total) but it seems to do it one cocd at a time even though I specify all of them through either ranges or by manually selecting the ones I want. Does anyone know if FS15 allows for mass updates to multiple cocds and if so what I may be doing wrong? Any assistance would be appreciated, thanks.
Hi,
Try to use the program RFBISA20 by SE38 transaction.
Please do not click on "Update File immediately" instead use batch input session.
All the Best !!
Regards
K Khatri -
Can a plant material valuated from company code to other company code ???
we have a lot of ships(plants) and the ship here defined as a plant with it own storage locations .
we have three company codes some ships are assigned to one company code and after a period of time it rented to other company code with its storage location........and the inventory go from one with its plant from company to another....
can i handle this case ?we can transfer material from one company code to other company code, One Plant to other Plant & one storage Location to other storage location . if material is valuated then accounting document will get generated while GR . material l price will get updated for new plant/ company code
Depends on your valuation type whether it is company code or plant
Regards,
Jyoti -
Asset Transfor from one Company Code to Other Company Code
Hi i want to know how to transfor total Assets from one company code to other company code
Ex:
1 - ABC
2 - XYZ
XYZ is my new Company code i have 100 assets in ABC Company Code, i am using that assets since last 3 years how can i transfor total Assets
Please suggest me,
Regards,
Venkathi
through intercompany transfer it can be possible,first you have to configure two company codes OBYA T-Code,ther you have to give posting keys ,g/l account.
I hope This will solve your problume.
assign me points
Regards
Ramana -
Document splitting issues in Cross company code scenario
Hi
We have the following business scenario:
(Please note : Document splitting with Real time CO-FI integration is active)
1)one company(say, Co.code X) purchases on behalf of another group
company(Co.code Y)
2)the cost center of Co.code Y is given in the 'Account assignment' tab
in the Purchase order created in 'X'.
3)The PO is created in foreign currency
4)So, when the Goods receipt happens, the expense posting is happening
in Co.code Y and the GRIR entry is in X.
5)When the invoice is posted in co.code X, the Vendor Open item (in
foreign currency) gets created in X.
6)The problem occurs when Forex.valuation is done for the Vendor open
item. The Forex.gain/loss is getting posted in Co.code X by deriving
the Cost object from the expense posting in Co.code Y. Now, the system
is giving an error message 'CO object doesnt belong to X co.code'
I beleive this is the way document splitting normally works by deriving
the CO object form the original expense posting onto the subsequent
documents but I guess, it is failing in this scenario. Please let me
know if there is a work around to resolve this issue.
Regards
RaviWe normally do the independent splitting of documents in respective company codes (This being the limitation mentioned by SAP for cross company code postings).
In the document split configuration, for Define document splitting rule, check for the leading item for cross company code transactions, and check for the item categories to be edited. The following two entries will be there
1100 Company Code Clearing CC = CC of leading item
1100 Company Code Clearing CC <> CC of leading item
In case of independent splitting, remove the first entry and check.
Thanks and Regards,
Mamta Sarda -
User exit about change item's goods issue day in transaction code VA01
Hi everyone.
Can someone give me some advice how to change item's
goods issue by user exit?
thank you in advanced.
Regards.
Eric xu.Can u be more clear.
This are the exits used for the VA01
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
SDAPO001 Activating Sourcing Subitem Quantity Propagation
V45A0001 Determine alternative materials for product selection
Regards -
Good Issue - Cost Center & Activity Code
Hi All,
I've a problem when I creating Good Issue using SDK SAP2007, I set "Cost Center" (CostingCode) dan "Activity Code" (CostingCode2).
When I run the code, and check the result in SBO2007 Good Issue, the "Cost Center" (CostingCode) dan "Activity Code" (CostingCode2) was in the "DistrRule" column not in the "Cost Center code" and "activity code" column, is this normal ? how to insert both data into the right column ?
This is my code:
Public Function uf_SAP_GoodIssue(ByVal dtTable As DataTable, ByVal p_cardCode As String, ByVal p_Date As Date, ByVal p_priceList As Integer) As String
Dim lngErr As Long
Dim strMsg As String = ""
Dim sboStockOut As SAPbobsCOM.Documents
sboStockOut = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenExit)
sboStockOut.DocDueDate = CDate(p_Date)
sboStockOut.DocDate = CDate(p_Date)
sboStockOut.PaymentGroupCode = Trim(p_priceList)
sboStockOut.CardCode = Trim(p_cardCode)
Dim i As Integer
For i = 0 To dtTable.Rows.Count - 1
If i <> 0 Then
sboStockOut.Lines.Add()
End If
sboStockOut.Lines.AccountCode = Trim(dtTable.Rows(i)("AccountCode"))
sboStockOut.Lines.CostingCode = Trim(dtTable.Rows(i)("CostCenter"))
sboStockOut.Lines.CostingCode2 = Trim(dtTable.Rows(i)("ActivityCode"))
'sboStockOut.Lines.CostingCode3 = Trim(dtTable.Rows(i)("PersonnelNo"))
'sboStockOut.Lines. = Trim(dtTable.Rows(i)("ActivityCode"))
sboStockOut.Lines.ItemCode = Trim(dtTable.Rows(i)("ItemCode"))
sboStockOut.Lines.Quantity = CDbl(dtTable.Rows(i)("qty"))
'sboStockOut.Lines.Price = 500
sboStockOut.Lines.WarehouseCode = Trim(dtTable.Rows(i)("WarehouseCode"))
Next
lngErr = sboStockOut.Add
If lngErr <> 0 Then
Call oCompany.GetLastError(lngErr, strMsg)
Return "Found error:" + Str(lngErr) + "," + strMsg
'Return "Failed to issue Stock." & lngErr
Else
Return "" '"Stock Issued"
End If
Call oCompany.GetLastError(lngErr, strMsg)
If lngErr <> 0 Then
Return "Found error:" + Str(lngErr) + "," + strMsg
End If
Return ""
End Function
Thx Before
Herfin JodanaHi Suraj,
Please check table COBK / COSP (with business transactions RKP1 and RKP2). Hope this may help you.
Best regards,
Dhananjai -
Issues with Multiple Company Codes
Our organization consists of 42 legal entities which all have their own company code in SAP and their own organizational structure. An example of how our jobs and positions are set up in SAP is provided below.
Job: Production Supervisor
Position: 0140 Production Supervisor (includes company code before position)
We may have 200 Production Supervisors company wide each with their own position number but they are tied to only one job number for Production Supervisor.
We are considering changing how the jobs and positions are set up in SAP so that instead of Production Supervisor the job would be Supervisor III and the position would remain the same. However, there may be other supervisor positions that will also be included in the Supervisor III job. We are afraid this may cause issues in the future if we implement other areas of the HCM module including compensation management, succession planning, MSS and ESS. Could we create a reporting structure seperate from the org structure so that executives at the corporate office would have access to information on all employees in their area of expertise company wide? Any suggestions you have would be greatly appreciated.Hi,
You can use the task object.
Or check out the Qualification Management.
Regards,
Dilek -
How to do invoice in other company code for a PO raised from one C.Code ?
Hi
A company has 2 company codes say A and B.
Company code A raises a PO to a vendor and states to send the Invoice on the name of Company B, though the GoodsReceipt is done in C.Code A.
How this scenario can be mapped into SAP-MM ?
Cheers
Maruthi.Hi Jürgen L.
I want to post the invoice in to G/L accounts of C.Code B.
If possible, what are the configuration settings i need to do ?
Thanks
Maruthi
Maybe you are looking for
-
Can I use the same app on 2 iPhones if one is no longer connected to ATT?
I have a iPhone 3G. I want to eventually get a new one (when the next gen ones are available). I want to keep the old one so one of my kids can use it as a "touch". Can I sync the same apps to each phone? I know you can share the same app on an iPhon
-
iphone 4 has a black scrren which will display the apple logo and appears to be at start up but then blacks out for approx 10 seconds and then displays apple logo again. Same action over and over. I have attempted hard reset but cannot complete. Al
-
hi, how we can generate PDF using java api's. Thanks and Regards Trilochan
-
Problem in printing GR slip WE03
Dear Experts, I have Plant A and Plant B. In Plant A , I can print the GR slip through MB90 for WE03 But in Plant B, I could not see the Output type WE03 (Gl note) against the material doc. in MB03 also. Can some one please help me where the setting
-
Consumption during the processing time of the production order
Which adjustments must be made in the material master for the calculation of the lot size in the MRP run, that the consumption of the material during the processing time of the production order is considered for the calculation of the lot size.