Goods Issue using RF Devices
Hi,
Our client wants to use RF devices to post the goods issue for reservations (movement 261) and reversals of these movements (262). I have checked the RF t codes and I do not see this functionality available.
Typically client wants to select a reservation from the list (run MB26 on handheld) and then post GI by selecting the reservation.
Can anybody suggest how to handle this situation using handhelds?
Thanks,
-Shekhar
HI,
check answer in thread [Goods Issue for Reservation using Bar Code System |Goods Issue for Reservation using Bar Code System;
Andrzej
Similar Messages
-
Error during Goods Issue using movement type U61
Dear All,
There is this error with respect to goods movement type U61. It states u201C Difference in Object List header data: U61 previously /321 Newu201D
I get this error when I am doing the Goods issue using the transaction EM10 or MB1A
Any guidance or help is welcome
Regards
Balaji.JHi,
The goods issue movement type is 501, the previous movement type was also 501 only. The status of the device is in ESTO. By doing goods issue using movemenn type U61, I need to make them in to AVLB status.
Regards
Balaji.J -
Goods Issue using BAPI_GOODSMVT_CREATE movement type 541
Hi
According to my requirement I need to do Post goods issue using BAPI_GOODSMVT_CREATE. But I am unable to do PGI . how to consume BOM details if batches are changed. please let me know what values I need to pass to BAPI . give with an example.
Its an urgent requirement.are you passing batch number to the BAPI?
if not try pass the batch number the rest of the things bapi will take care of.
bi -
Post Goods issue using bapi_goodsmvt_create
hi,
Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?hi,
*& Report ZRPT_SUB_KO01GOODSMOVEMENT
REPORT ZRPT_SUB_KO01GOODSMOVEMENT.
PARAMETERS : P_BAG(17) TYPE C,
P_ZZORG LIKE zaUFK-ZZORG,
P_MATNR LIKE MARA-MATNR,
P_WERKS LIKE AUFK-WERKS,
P_WERK LIKE AFPO-PWERK,
P_DATE LIKE MKPF-BUDAT,
P_LGORT LIKE GOITEM-LGOBE.
DATA : BDC_DATA TYPE STANDARD TABLE OF BDCDATA. "internla table for bdc data
DATA : WA_BDC_DATA TYPE BDCDATA . "work area for bdc data
DATA : T_XMSEG TYPE MSEG.
DATA : T_XMKPF TYPE MKPF.
DATA : V_BAGS1(17) TYPE C.
DATA : BEGIN OF WA_MB1B,
ZZGCODE TYPE ZMIGO-ZZGCODE,
ZZGBAGS TYPE ZMIGO-ZZGBAGS,
WERKS TYPE AUFK-WERKS,
LGORT TYPE VBRP-LGORT,
ZZORG TYPE zAUFK-ZZORG,
END OF WA_MB1B.
DATA : V_MATERIAL TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
data : v_date(10) type c.
DATA : T_GOODSMVT_HEADER TYPE BAPI2017_GM_HEAD_01,
T_GOODSMVT_CODE TYPE BAPI2017_GM_CODE,
T_GOODSMVT_ITEM TYPE STANDARD TABLE OF BAPI2017_GM_ITEM_CREATE,
T_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA : WA_GOODSMVT_ITEM TYPE BAPI2017_GM_ITEM_CREATE.
DATA : BEGIN OF S_MARA,
MEINS LIKE MARA-MEINS,
END OF S_MARA.
DATA : MATERIALDOCUMENT TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
*FORM GOODSMOVEMENT TABLES T_RETURN
USING WA_MB1B LIKE WA_MB1B.
SELECT SINGLE MEINS
FROM MARA
INTO S_MARA
WHERE MATNR = P_MATNR.
CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO V_DATE SEPARATED BY '.'.
T_GOODSMVT_HEADER-PSTNG_DATE = P_DATE.
T_GOODSMVT_HEADER-DOC_DATE = P_DATE.
T_GOODSMVT_CODE-GM_CODE = '04'.
WA_GOODSMVT_ITEM-MATERIAL = P_MATNR. "'000000000000001556'.
WA_GOODSMVT_ITEM-PLANT = P_WERK. " '1000'.
WA_GOODSMVT_ITEM-STGE_LOC = P_LGORT. " '0001'.
WA_GOODSMVT_ITEM-MOVE_TYPE = 'Z42'.
WA_GOODSMVT_ITEM-VENDOR = P_ZZORG. "'0000100224'.
WA_GOODSMVT_ITEM-ENTRY_QNT = P_BAG. " '1'.
WA_GOODSMVT_ITEM-ENTRY_UOM = S_MARA-MEINS.
WA_GOODSMVT_ITEM-ENTRY_UOM_ISO = S_MARA-MEINS.
WA_GOODSMVT_ITEM-MOVE_PLANT = P_WERKS.
APPEND WA_GOODSMVT_ITEM TO T_GOODSMVT_ITEM.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = T_GOODSMVT_HEADER
GOODSMVT_CODE = T_GOODSMVT_CODE
IMPORTING
MATERIALDOCUMENT = V_MATERIAL
TABLES
GOODSMVT_ITEM = T_GOODSMVT_ITEM
RETURN = T_RETURN.
BREAK shailajaa.
EXPORT t_return to MEMORY ID '123'.
EXPORT V_MATERIAL TO MEMORY ID 'MAT'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = ' '.
*ENDFORM. -
Cancel goods issue using idoc DELVRY03
Hi,
IS it possible to cancel goods issue using inbound idoc DELVRY03.
The field 'qualf' of the segment E1EDL43 says it's possible to do It. But when I try to do IT I have a message saying that the GI has already been performed and that I can't do anything on the delivery.
Do someone know if It's possible or not using DELVRY03.
And if not what is the idoc allaowing this.
Thanks in advanceHi omar,
i have your same trouble.
Have you found anything?
thanks in advance -
Hi,
My Client have created a Delivery Order along with the Transfer order, the Goods Issue has been posted. When he tried to reverse the Goods Issue using VL09, it promoted the error: GI for Delivery XXX cannot be canceled for the following reason, Document (Material Movement Document: GI) does not contain any selectable items. Can anybody please help me?
Thanks.Hi,
Make sure your User has created the Delivery only or Invoice also for that particular order if there is invoice also exist to that particular order he has to check first the Document Flow Status and he has to cancel the invoice by using tocode vf11, he has to cancel the shipment cost if there is vi02, he has to cancel the shipment vt02n then he can do goods reversal vl09 and Delivery.
This may help you Inshallah
Regards,
Mh -
Goods issue using bapi BAPI_GOODSMVT_CREATE getting error E M7
HI consultants,
While posting goods issue using bapi BAPI_GOODSMVT_CREATE . Running the batch job(zprogram) to post the goods issue . The goods issue is been posted by passing goods receipt data's.
while processing 3 goods receipt , 2 works fine one goods receipt getting E M 7 300 NO ITEMS ARE TRANSFERED error.
when i processing one by one all the 3 goods receipt is working fine and process sucessfully. While processing in bulk ,i am getting this issue.
If anybody faces this same problem or knows the solution .Please post the answer.
The way i am passing the parameter to bapi given bellow.
WA_GOODSMVT_CODE-GM_CODE = C_03.
*--populate header data
WA_GOODSMVT_HEADER-DOC_DATE = WA_MKPF-BLDAT.
WA_GOODSMVT_HEADER-PSTNG_DATE = WA_MKPF-BUDAT.
*--populate item data
*-- call the bapi for posting goods issue
IT_GOODSMVT_ITEM-NETWORK = WA_RESBP-AUFNR.
IT_GOODSMVT_ITEM-RESERV_NO = WA_RESBP-RSNUM.
IT_GOODSMVT_ITEM-RES_ITEM = WA_RESBP-RSPOS.
IT_GOODSMVT_ITEM-ACTIVITY = WA_RESBP-VORNR.
IT_GOODSMVT_ITEM-MOVE_TYPE = C_281.
IT_GOODSMVT_ITEM-ENTRY_QNT = WA_RESBP-NET.
*--get the item details
IT_GOODSMVT_ITEM-MATERIAL = WA_MSEG-MATNR.
IT_GOODSMVT_ITEM-PLANT = WA_MSEG-WERKS.
IT_GOODSMVT_ITEM-STGE_LOC = WA_MSEG-LGORT.
IT_GOODSMVT_ITEM-ENTRY_UOM = WA_MSEG-ERFME.
CALL FUNCTION 'CONVERSION_EXIT_ABPSP_OUTPUT'
EXPORTING
INPUT = WA_MSEG-PS_PSP_PNR
IMPORTING
OUTPUT = WA_PSPHI_TEMP.
IT_GOODSMVT_ITEM-WBS_ELEM = WA_PSPHI_TEMP.
APPEND IT_GOODSMVT_ITEM.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = WA_GOODSMVT_HEADER
GOODSMVT_CODE = WA_GOODSMVT_CODE
IMPORTING
MATERIALDOCUMENT = WA_MATERIALDOCUMENT
TABLES
GOODSMVT_ITEM = IT_GOODSMVT_ITEM
RETURN = IT_RETURN.
With Regards,
Ambrose Mohandoss.Problem solved.
-
Problem in Goods Issue using BAPI_PRODORDCONF_CREATE_TT
Hi All,
This is regarding goods issue in a production order.We are trying to do this using BAPI_PRODORDCONF_CREATE_TT.
We have a finished good say FK_PROD_ORD_CONV(with BOM -FKTESTOUT2).we need to do a Goods Issue for this which implies that at reporting point 0001,we need to issue x quantities of BOM FKTESTOUT2 from a particular plant and storage location, and of a particular batch. Therefore, we need to pass the following:
Production order number
Plant
Material (BOM) = FKTESTOUT2
Movement indicator (which is u2018Fu2019 for goods movement) = u2018Fu2019.
Movement type = 261(for Goods Issue)
Storage location of BOM
Batch
Operation (Routing point) = 0001
Entry quantity
Entry Unit of measure = PC.
In addition, we need to maintain entries in Link_conf_goodsmov-INDEX_CONFIRM and link_conf_goodsmov-INDEX_GOODSMOV. The value for both would be u20181u2019.
In the Test program, although I am passing all these values, Goods Issue is not happening. I am not getting any error.The message just says that the production order has been confirmed but when i check for goods Issue,no corresponding data is there.
Please let me know if I have missed something.Hello.
Are you calling FM BAPI_TRANSACTION_COMMIT afterwards? If yes, check the content of structure RETURN.
Regards.
Valter Oliveira. -
How to change the g/l a/c being used while doing goods issue using migo
when I pass a migo entry whilie purchasing material
, the entry goes through stock
stock (230000 a/c no) 150 dr
GR/IR (150000 a/c) 150 cr
when I issue material after reservation for which again migo is done
entry is
repairs to plant and mach (4800569 a/c) 175
stock (230000 a/c no) 175
The stock a/c is debited and credited due to t.code obyc where for inventory posting I have assigned a/c 2300000 for valuation class assigned to material.
now I want to have a/c no 4800689 in place of 4800569. how can i change that.
that is when I issue material from stock this should be debited to 4800689 instead of 4800569. please provide t.code to change the gl from 4800689 from 4800569
full points will be awardedcontinuing my issue is it possible to that we donot have to change the gbb and vbr and still we can have the desired results.
that is we are able to use different gl for debit while doing goods issue from a single stocked material
or we want to have this result
1. repairs to p&m 1000 dr
stock of cement a/c 1000 cr
2. repairs to building 2000 dr
stock of cement a/c 2000 cr.
3. construction 3500 dr
stock of cement 3500 cr
we donot want to change the GBB and VBR every time or change the GL a/c while doing reservation.
is there any third option where we get the desired result without changing or entering the g/l manually
if there is please let me know the t.codes -
Error while reversing goods issue using VL09
Hi All ,
user is getting the error " 4902546971document does not contain any selectable items " when reverse the GI using VL09.
Please find the below document flow.
Free of Charge 70475917 / 10
. Purchase order 9900099037 / 10
. Delivery Standard 80721176 / 10
.. Shipment 199662 / 1
.. WMS transfer order 12862453 / 1
.. Pro Forma Invoice 90070497 / 10
.. GD goods issue:delvy 4902546971 / 1
Regards,
AmarHi,
Try to reverse the gods issue, with VL09, for document "Delivery Standard" with number 80721176
Free of Charge 70475917 / 10
. Purchase order 9900099037 / 10
. Delivery Standard 80721176 / 10
.. Shipment 199662 / 1
.. WMS transfer order 12862453 / 1
.. Pro Forma Invoice 90070497 / 10
.. GD goods issue:delvy 4902546971 / 1
Regards,
Amar -
Posting goods issue using Message type SHPCON and idoc type DELVRY03
Hi SAP Gurus,
I am using message type SHPCON and idoc type DELVRY01 with processing code DELV to post goods issue for a delivery note.
I tried to simulate the inbound entry via WE19. The scenario should be posting goods issue based on the delivery order.
In some cases, quantity issued is less than the quantity in the DO. For this, I need to change the delv quantity in the DO via VL02N before I select Post goods issue button. This will change at the same time post the goods issue.
What I have filled up are the fields:
E1EDL20-VBELN = DO num
E1EDL20-VSTEL = Plant
E1EDL18-QUALF = "PGI"
E1EDTH13-QUALF = "006"
E1EDTH13-NTANF = date today
E1EDL24-POSNR = 000010
E1EDL24-MATNR = material num
E1EDL24-WERKS = delv plant
E1EDL24-LGORT = sloc
E1EDL24-LFIMG = updated quantity
But everytime I simulate using WE19, the entire quantity in the DO is not changed at all. The goods issue quantity posted is still the original DO quantity.
May I know how to do this? Thanks.Put value in E1EDL24-LGMNG for qty to pgi.
-
Goods Issue using VT02N transaction
HI Friends,
I am doing shipment completion and when i press save button in VT02N transaction, Goods Issue is done for the delivery document. But when i try to reverse the Goods Issue and try to do Goods Issue again using VT02N tran (doing shipment completion & press save button), its not doing Goods Issue.
wt should i do to make goods issue happen using VT02N even after the reversal?
Thanks & Regards,
SasiProblem solved.
-
Cancel goods issue using Idocs
Hi,
I'm trying to cancel a goods issue on delivery using idocs. I would like to use either WMMBID02(Message type WMMBXY) or DELIVERY03(message type SHPCON).
Is it possible or not?
If not, which idoc do I have to use for this
ThanksHi Omar,
Welcome to SDN.
Please try to use this IDoc type MBGMCA01 with message type MBGMCA and process code BAPI.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Backdate Posting of Goods Issue using standard BADI
Hi Experts!
The standard BADI we are using creates an STO then a Delivery and Goods Issue via a userexit. We have a requirement to backdate the posting dates and have a concern of deficit stock levels at the point of Goods Issue. How do we control this?Hi,
Instead of updating entire data of deliveries and PGI once, you can manually update the stock for a specific period and then update the Deliveries and PGI in the system.
Or update entire stock at once till date and only then update the Deliveries and PGI in the system.
Hope this helps.
Regards,
Sharan -
Good issue using mass maintenance
Hi SAP fans,
I'm about to do good issue process using movement type 551 Scrapping.
the users want to have 1 document number for 1 thousand material to scrap.
is there any mass maintenance for good issue ?Hi
If you want to post large number of lin items in one document you need to use the BAPI - BAPI_GOODSMVT_CREATE
condition being all the line items should belong to one plant....
You can get more details on the BAPI using T.code BAPI -> Materials Management -> Inventory Management -> GoodsMovement -> CreateFromData here click on the documentation tab....
Thanks & Regards
Kishore
Maybe you are looking for
-
How do I remove the Output Tray of my HP OfficeJet Pro 8620 e-All-in-One Printer
I cannot remove the Output Tray. I do some printing two-sided (one in color, the other b&w). Removing the Main Input Tray to place the paper for Side 2 is time-consuming. It would be much easier to take the just-printed Side 1 as it's completed, t
-
We are facing a performance issue related to cube refresh. Even a small cube consumes around 70% of the CPU while refreshing. Details of the cube: This cube has 10 dimensions and 46 straight forward measures (mix of sum and avg as aggregation algorit
-
Who do I contact in regards to a faulty album download? Specifically, a duplicate track and a missing one that is available as "album only"
-
What are the mysterious keys for hide and unhide programs?
There is a strange symbol next to the apple symbol that is part of the hide and unhide short cut keys. I cannot find what these are after searching help, studying the keys and asking several people. This must be so obvious it escapes me! I have the n
-
When I want to download a song or redeem a gift card, it says my network connection timed out. But when I check my wireless connection, everything is fine with it. Do you have to have a wired internet connection to download iTunes music?