Goods movement 101 in Production Order Confirmation.

Hello Gurus,
I do the production confirmation via CO15, but when I press the 'Goods movement' button, there are only the components existing on the Goods movement item.
I can not see the material which I produced with the Movement type 101 'Goods receipt for order into warehouse'.
Can anyone tell us how to maintain it to allow us do the goods movement for the product?
Regards,
Tiger

Hi Ranga,
Thank you for your answer.
I resolve my question according to your solution.
Select 'Auto Goods receipt' in control key via OP67
Also thanks to Benny.
Regards,
Tiger

Similar Messages

Goods movement tab in production order confirmation

Hi Gurus, please suggest me with the solution for my requirement.
while performing production order confirmation, some user should be restricted to see goods movements and some can. how is can me done?
Thanks in advance.

Dear,
Please refer my reply from this link,
[CO15/CO11N Goods Movement Screen Hide or Non-editable |CO15/CO11N quantity column should be non editable in Goods Movement Screen]
Regards,
R.Brahmankar

Production Order Confirmation saved but no goods movement happening

Hi Folks,
I have implemented an enhancement while Production Order Confirmation ( txn CO11N). The enhancment works as follow:
I have a production order with quantiy 2. Now I am making confirmation for quantity 1. In the enhancement, i have used a BAPI called BAPI_PRODORD_CREATE_FROM_REF to create another production order with the remaining quantity 1.
As of now everything works fine and a new prod order is created with quantity 1.
Now, I release this newly created prod order and make GR for the same. The problem here is, now when I try to confirm this newly created prod order ( txn CO11N), the confimation is saved but the goods movement does not happen. I get a message saying " Confirmation saved (Goods movement 0, failed 1) ".
The original order is of type PP01 and everything works fine for it. The newly created order is of type ZRWK (rework) and for this only confimation is saved but no goods movement.
Request you to please suggest how can I remove this error and make goods movement as that of for the original order.
Thank you.
Regards,
Sud.

Hi
Check if you have something in the tcode COGI. Perhaps you don't have enough stock of raw materials
Regards
Eduardo

Restricting Good Receipt Unless Production Order Confirmed

Hi
Experts,
I want to Restricting Good Receipt Unless Production Order Confirmed
I am doing following thing but the error is occured.
Use Tcode BS02 ( Customising USer status profile).
2. Select the order type which you want to configure (eg:PP000001) and choose "Details" button.
3. In the User status table do the following:
a. In the status no field type"1" , status field "Sta1", short text"GR not allowed", lowest no "1", Highest No "2". Mark a tick in the initial stats check box.
b.Next line, type status no field "2" ,status field "sta2", short text"Gr allowed", lowest no "2" , highest no "2".
4. Select the STA1 line and choose details. select the "create"button.select the "GR for prod order", mark "forbidden
radio button" and "set radio button".
5. Select the STA2 line and choose details. Selct the "create"button. select "confirm order", mark "permitted radio button" and "set radio button". Next choose "GR for prod order" , mark "permitted radio button".
6.Save.
Create a prod order and check whether the required scenario is working.
I have created user status profile as PP000001 GR
ERROR
First define allowed object types
Message no. BS218
Diagnosis
The object types for which a status profile may be used define which business transactions are included in business transaction control.
Procedure
First define for which object types this status profile can be used.
What is object type how to define?
Thanks & Regards
Pert

Hi,
Refer to the below thread which addresses the same need:
Re: GR not allowed :BS02
Revert if you face any issues.
Regards,
Vivek

Batch Split during GR for Production Order Confirmation

Hi All,
We need to do batch splitting during GR for Production Order Confirmation.We are using CO11N for confirming the Production Order and in the PP settings auto GR is activated once the Confirmation is done.
Currently it is generating only single batch number for the complete quantity, but our requirement is that we need that system should create separate batch for each piece.
For ex.: Production Order is for 100 pce, when we do Production Order confirmation, system is automatically doing the GR by 101 movement type and it is creating one single batch for full 100 pce. But we want the batch number should be generated for 1 pce i.e. we want to split the 100 pce into 100 batches with 1 pce each.
Please let me know what can be done for this requirement.
Regards,
Ankit

Dear,
In OPK0 you need to active the screen Mill: Goods Receipt (8485) for confirmation profile for the single-screen entry.
Best way is use BAdI /SAPMP/SPLIT_CO11N for the Enter Time Ticket for Production Order transaction (CO11N)
you must activate BAdI implementation /SAPMP/SPLIT_POPUP and/or /SAPMP/SPLIT_CO11N for this BAdI
I have use the same BADI it will ask you number of split according to that it will split the GR line item.
Please refer this link,
http://help.sap.com/saphelp_dimp50/helpdata/EN/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
Regards,
R.Brahmankar

Goods Receipt of Co-Products in Confirmation

Hi experts,
I have a question for all that can clear this up for me:
Using Co-Products is not possible to automatically post the goods receipt for Co-Products. There's even a SAP Note for this (38108).
But checking the customizing in the activity "Define Confirmation Parameters" there's an option in the order types where you can tick a box called "GR of Co-products".
If you check the SAP assistant of this box you can read this:
Goods Receipt of Co-Products in Confirmation
Defines that when manufacturing orders are confirmed, the goods receipt of co-products can also be posted.
So my question is:
If at confirmation we cannot post automatic goods receipt for Co-products why do we have this little box (GR of Co-products)? What is this for?
Hope someone knows and can explain it to me.
Thanks a lot.
Regards.

Yes, you are totally right.
I've checked in other system and the box does not show up.
I've been told that SAP Mill was installed in the system i'm using. I think it can be because of that since SAP Mill allows automatic goods movement at confirmation.
Thanks a lot for your reply.
Regards.

Production Order confirmed finish date

Good morning,
I have a question concerning the confirmed finish date (GLTRI) on the general tab of the production order header. We have an order that a partial confirmation was done on the last operation with no yield. This was the first confirmation of the order. The general tab shows a confirmed start date and a confirmed finish date. First question is why the confirmed finish date if nothing was completed. The confirmation was then canceled and the start confirmed date was removed but the confirmed finish date remained. More testing revealed if a final confirmation was performed on the last operation where it is set to do an automatic goods movement the start and finish confirm date was filled in. When the confirmation was canceled the start and finish confirmed dates were removed. Has anyone come across this before?

dear John,
I played in our TST system and found the same behaviour (which I consider is a standard).
I can't see this "confirmed dates" settings in config.
It seems like as soon the first entry comes in AFRU system sets the 'Start Confirmed' date even if LMNGA is zero
After cancellation system cleans this field date because the order status comes back to REL (the was only the one zero partial confirmation which was cancelled later). but keeps 'Finished Confirmd' field populated. Of course, the second record in AFRU (the cancellation) is created.
To avoid a misunderstanding I suggest advise your users to run CO14 (display prod.order confirmation) or just use COOIS.
good luck!

Validation of material BOM quantity at the time of production order confirm

Hi,
I want validation on material BOM ,when i confirm production order.
Actually when i am going to confirm my production order by tcode CO11, In this screen,i click on "Goods Movement" button. According to confirmed quantity , consumed materials will display. Here i can change material quantities. And here i want some validation. I there any user exit for this screen.

Hi,
Exit Name Description
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
PCSD0014 Knowledge-Based Order BOM: Status
BADI's are
WORKORDER_CONFIRM
WORKORDER_UPDATE
WORKORDER_GOODSMVT
<b>Reward points</b>
Regards

Production order confirmation problems

My production facility has been having problems for years centered around the production order confirmation process. My colleagues and I are considering submitting an OSS note to SAP, but figured that we should present our problems in these forums before making that next step.
Here are some individual issues which I believe may be related. All of these issues occur off and on at random. They will typically occur when more users are working in the SAP system or when SAP is running slow.
- When an order is confirmed and a label is printed, sometimes the quantity on the label will be incorrect. Sometimes no label will print out at all. When the order is unconfirmed and then reconfirmed again, a label prints out with the correct quantity.
- When a confirmation is unconfirmed, the unconfirmation will not backflush the associated materials correctly. Sometimes this error will appear in CO1P for us to re-confirm, but not always.
- Sometimes confirmations will only backflush certain materials and not ALL the components within the production order. When the confirmation is unconfirmed and then reconfirmed again, the confirmation will backflush all materials correctly.
These problems occur at random intervals and never present the user with an error. Close to 100% of the time all the confirmation issues will be corrected by simply u201Cre-doingu201D the confirmation as we did the first time (no changes in the process). Only the second time around there will not be any issues. This leads me to believe there is some internal issue with SAP, perhaps involving which tables CO11N pulls from when a confirmation is made.
Any and all help is appreciated. We currently run the AFS version of SAP. This is my last stop before submitting an OSS note.

Hi,
I have not worked on AFS, so consider the below as a pointer which might help:
When you post confirmations & notice that the components are not being backflushed, check in COGI it could be that there are some incorrect goods movement. You will be required to clear these entries from COGI.
I suspect that you notice these because, the confirmations are being posted even before the stock for the same has been received & hence the issue with labels as well.
Do a check on the above, if it resolves the issue, then i would suggest re-design the process to ensure you do not have COGI or COFC entries.
Also do a search in OSS for AFS specific notes on confirmation.
Hope it helps.
Regards,
Vivek

Collective Order good moviement 101 - 261 ( sub - order )

Dear gurus,
i inserted in the HALB component the special procurement (52) and the Type procurement = E
I created a production order for the Material Fert and the system create a collective order .
Order 0001 for the FERT material and the order 0002 for the HALB material.
When we confim the order 0002 the system don't create a good moviment 101 for the HALB component and the MD04 don't exist . In the production order 0002 the issue quantity is 5 pz but we don't see the stock in the MD04.
I need to have the moviment 101 for the sub order .
How i can have this situation of good moviment ? You can tell me the example of movimentation for the collective order ?
Where we can find the information of this collective order ?
Thanks a lot
Daniele Pistilli
PP TEAM

Dear,
Within a collective order stock movements only take place for the leading order (that is, the order that is at the highest production level) and not for directly produced components. This makes it easier to maintain the collective order in comparison with several individual orders. A further advantage is a more realistic representation of the costs of the production process, since subordinate orders can be directly assigned and settled to superior orders
Hope this will help you.
Regards,
Pavan

GR qty showing less than production order confirmation qty

Hello Experts,
Greetings.
My issue is while doing production order confirmation(CO12),for some materials it shows less GR quantity than the confirmation qty.I m wondering how it can be possible?
What could be the problem?
Plz advice.
Thanks
Nitin

Confirmed qty of each operation and delivery qty at the header are two different fields. Confirmed qty will be the same with the yield to conf. during confirmation. Whereas, the GR qty is equal to the total sum of quantity received from the order.
Check whether during confirmation you create auto GR or not. If yes, then check the COGI t-code. There might be some error log of goods receipt in there. If no, then check GR qty in document goods movement compared to confirmed qty during confirmation.
Hope it helps.

Cancellation of Production Order confirmation (CO13) not generating TR/TO

Hi,
We are facing a typical issue in the PP-WM interface. When we create an order and confirm it (partial confirmation), the Goods movement happens (261 mvt type) as desired and the TO is created and confirmed in the background.
But, when we try to reverse the movement type (cancelling the production order confirmation using CO13) then there are no TRs or TOs generated in the background (for movement type 262).
When I manually try to post a material document for 262 movement type, it creates a TO in the background (as per the configurations that I maintained) but this does not happen when movement type 262 is called using PP interface.
The movement type configurations are all done for Automatic TR and TO generations - this works with normal IM process (when we manually post using MB1A transaction) but not with the return Goods movement happening with PP.....here, the material comes back to the interim storage type 914. We then need to create a TO manually and confirm it to take the stock back in to the original storage type and bin.
We want that when a process order confirmation is cancelled then the materials should be posted back in to the original storage type and bin (from where the material was issued against the order).
For Info: COGI shows no errors during the 262 movements, also, material document is generated for 262 movement type but no TR/TO generated.
Is there any configuration that we have missed?
Thanks and Regards,
Shankar

Hi,
Yes, you are correct in the understanding that the system creates quants in 914 when the production order confirmation is cancelled. But, it does not generate any TR or TO in the background to post the stock back into the original storage type.
Can we not use the put away strategies so that the system determines where to place the material? My query is that despite all the configurations for automatic TO creation and confirmation for movement type 262, it does not generate a TO (or TR) in the background when a production order confirmation is cancelled using CO13.
However, if I manually post a material using MB1A for 261 movement type and reverse it using 262, it generates a TO and confirms it as per the setting in configuration.
The same thing does not work when we run it through PP (CO11N and then CO13).
Any suggestions on how to approach this and where to check for missing configurations?
Thanks and Regards,
Gaurishankar

User exit for Production order confirmation during goodsmovement

Hi Guru's
Am in need to find the user exit for Equipment master creation. Equipmentmaster will be created when the goods movement 101 happens. can someone help me out to find the user exits. thanks

Hi,
Ok thanks for that.For Co11n please find the user exits below.But i am not sure which will suit your requirment.Please let me know for any further help.
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default va
CONFPI02 Process order confirmation: Customer spec. input checks
CONFPI03 Process order conf.: Cust. spec. check after op. select
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when savi
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default val
CONFPM02 PM/SM order confirmation: Customer specific input check
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selectio
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when sav
CONFPP01 PP order conf.: Determine customer specific default val
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selectio
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when sav
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscree
CONFPS01 PS confirmation: Determine customer specific default va
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. sele
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when sa
Thanks,

Production order confirmation cancellation

Hi
Can any body suggest the process of prod order confirmationcancellation. In my case, the prod order was created and confirmed and goods movement 101 completed. Now If I want to post confirmation cancellation, how I need to proceed. Please suggest
I tried to do it through CO13 and got error BK 888
"Document incomplete -- transaction can not be executed"
Please suggest

Hi,
For detaile error check in COGI t code.
Arun

Production order confirmation with BAPI

Dear PP friends,
I want to create a program to confirm production orders in mass at header level like CO15. To do it I am trying to use BAPI_PRODORDCONF_CREATE_HDR and it works fine for planned backflush.
However, I am not able to change data of goods movement (quantity, warehouse and batch). Is it possible?
What is the function of GOODSMOVEMENTS table?
I studied the following thread but I could not solve it.
Production Order Confirmation BAPI
Does anyone have suggestions?
Thanks in advance.
Marcos

Hi Caetano,
Thanks for your reply.
I tested BAPI_PRODORDCONF_GET_HDR_PROP and it proposes goods movements according with open quantity of the production order. In this case, would I have to adjust all movements with actual quantity?
Is possible to propose goods movements according with confirmed quantity?
Regards,
Marcos

Goods movement 101 in Production Order Confirmation.

Similar Messages

Maybe you are looking for