Goods movement from PI sheet

Dear Gurus,
I am entering and saving the actual consumed quantity of components in the PI sheet but the stock is not reducing (In MMBE, same stock in unrestricted use before and after goods issue). Why?
All replies will be rewarded.
Regards,
Jejesh.

Dear Arne,
I am using the following INSTRUCTION for Material list in PI sheet.
ZMATINF -   10     PPPI_MATERIAL
                   20     PPPI_RESERVATION_ITEM
                  30     PPPI_MATERIAL_SHORT_TEXT
                  40     PPPI_BATCH
                  50     PPPI_MATERIAL_QUANTITY
                  55     PPPI_MATERIAL_CONSUMED
                  60     PPPI_UNIT_OF_MEASURE
                  70     PPPI_STORAGE_LOCATION
With this i am getting material component list with batches after doing the batch determination in the process order which is nothing but a BOM list.
But normally my actual goods dispensing will differ from the BOM components.
I want the system to display this list (The actual list after doing GI i,e MB1A).
How can we do Auto GI/GR through PI sheet?
Kindly explain.
Regards
Jeevan

Similar Messages

Goods Movement in PI Sheet

Hi,
I have to mapped PP-PI Scenario for one of our client, so i want to know that how goods movement will be happen in t cod e COEBR at the time of PI sheet processing. And also please ellborate the Massage sending and Recieving Process.
Thanks in Advance,
Vishal

Dear Arne,
I am using the following INSTRUCTION for Material list in PI sheet.
ZMATINF -   10     PPPI_MATERIAL
                   20     PPPI_RESERVATION_ITEM
                  30     PPPI_MATERIAL_SHORT_TEXT
                  40     PPPI_BATCH
                  50     PPPI_MATERIAL_QUANTITY
                  55     PPPI_MATERIAL_CONSUMED
                  60     PPPI_UNIT_OF_MEASURE
                  70     PPPI_STORAGE_LOCATION
With this i am getting material component list with batches after doing the batch determination in the process order which is nothing but a BOM list.
But normally my actual goods dispensing will differ from the BOM components.
I want the system to display this list (The actual list after doing GI i,e MB1A).
How can we do Auto GI/GR through PI sheet?
Kindly explain.
Regards
Jeevan

Goods movement from Maintenance order

Hi Experts
I have the following scenario,
I have a component ( with Material master) in the maintenance order and i use Item category N to trigger a Purchase requisition. The Pur Req is converted to Purchase Order and then the GR is done directly to the order .
Now i have not used this Component and want to make a goods movement to place it in stock. So the requirement is to move the material from Maintenance Order to the Storage location .
How and which movement type can i use to do this ?
Please help
KK

Hi,
Click the below link for more information
http://sap-img.com/plant/in-pm-how-to-return-material-backflushed.htm
regards,
Venkatesan Anandan

Message while performing goods movements in PI sheet

Dear experts,
Kindly suggest way to populate the message that system provides while performing goods movment using co11n and cor6
at the time of posting the message through PI sheet.
System usually populates message like 6 goods movement posted 1 failed using co11n or COR6 same needs to be populates while posting the messages using PI sheets.
Thanks in advance for your inputs and help..
Regards,
Nitish

dear experts ,
please give your valuable input.
can we use FI_PERIOD_CHECK ?
regards
satish

Goods Issue from PI Sheet.

Hi,
I want to do GI from PI Sheet.
I created Master Recipe with Proce Instr Conc_C.
When i create Process Order i am getting PI Sheet
But i couldnt do GI from PI Sheet. I have tried from Call Trans, from there i can do.
But i want to do from PI Sheet
Pl suggest the required Process messages or Process Instruction Categories
Thanks

Pre requisities
1. Material Master, BOM, Master receipe
2. IN master receipe - Control receipe destination and requred Process instruction category needs to be maintained.
3. NOw create a Process order and check if the Control Recipe has been created.
4. Now From co53xt Release the created Control recipe / Instruction to the PI Sheet.
5. Now in the co60xt - you will see the Released Instruction sheet.
6. Here in the change mode enter the value and report the data ( In case of ABAP ) / Complete in case of the Browser Based.
7. Now as we complete this the GR doest get completely posetd.
8. NOw you need to go to C054Xt and post the Process instruction.
9. If all your entries are correct then the GI would be posted.
revert back for clarifications

Why i can not see the Document goods movements from T-CODE CO03 ?

Hello,
why i can not see the Document goods movements list use T-CODE CO03 ? I'm sure i have issueed for this production order. thanks.
xinzhou.

Hi,
Is this a problem with only one order? or with all the Orders of the same "Order Type".
If this is with only one Order, check goods movements actually done or not?
If this problem is with other Orders as well (same Order Type), then with the T.Code; OPL8.
In the 2nd Tab Page (Implemenation) - Whether the Check boxes are filled for Documented Goods Movements??
Regards,
Siva

Automatic Goods movement from CO11N for serialized materials

Hello,
I'm dealing with confirmation of discrete production orders. When I confirm last operation, the system has to post Good Receipt automatically but materials are serialized, so I know I cannot use flag "Automatic GR" in control key.
My requirement is:
soon after the confirmation, I want to call MIGO transaction (movement type 101) with order number, yield confirmed, material code coming from CO11N.
Both CO11N and MIGO have to be on line transactions.
I have activated enhancement CONFPP05 but the call transaction MIGO gives me the message "Order xxx is already being processed" because the confirmation isn't still saved .
The BADI WORKORDER_CONFIRM has the same problem.
I haven't found an exit after saving the confirmation.
Have you any suggest?
Regards
Nue

Hello
You can try Background job for all confirmed order, ran MIGO background
thanks
bala

Mass goods movement from plant to plant

Hi,
I need to move stock from one plant to another plant in IM.
Are there any mass movement transactions I can do using movement type 301?
I'm trying to avoid posting them manually using MB1B.
Any input would be greatly appreciated.
Jimmy.

Use LSMW with object 0110 which is report RM07MMBL

Error while running InfoPackage - Goods Movement from Inventory Management

Hi,
We first encountered an error <i>No storage space available for extending table IT_ 3, Error 7 when sending an IDoc, Errors in source system</i> upon running the infopackage (inside a process chain). The step was accidentally repeated and now the error log shows that <i>the delta request is incorrect in the monitor and that a repeat needs to be requested.</i>
What should be our corrective steps for this kind of problem? Would a selective deletion and repair suffice?
Kindly advice. Thanks.

Yes, I think it's safe. But there is no guarantee that the process will not fail again. You'd better contact basis guys for space increasing.
Also you can try to clean the system by yourself:
1. Delete PSA that you don't need.
2. Delete old system logs (SLG2 tcode).
Though, it's not a fact that additional room will appear in that spaces that your PC uses.
Best regards,
Eugene

Function Modules for goods movement

Hi Expert,
I need FM Modules for goods movement from one bin to other bin and for Storage location to other storage location.which movement type we have to use for BIN to BIN and Sloc to Sloc.
How to find the stock of a material with respect to bin level.
-RK

Hello,
Hello have alook at below FM's:-
CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'
CALL FUNCTION 'MB_POST_GOODS_MOVEMENT'
Regards,
Nikhil

IDOC for Goods Movements

Hi gurus,
I am currently looking for IDOCs configuration in order to send (outbound) and receive (inbound) goods movements between SAP and a legacy system.
Basically information about configuration( how to trigger IDOC outbound to legacy system), message type, Idoc type, Process Code (For inbound).
Any information will be appreciated.
Best Regards,
Gabriel Santana

Hi !
Here comes some information for the INBOUND idocs....
There is a IDOC for transmitting goods movements from a legacy system.
It's message-type is: WMMBXY
IDOC-Type is: WMMBID02 (See we60 for it's pretty good docu....)
Prcoess-Code is :WMMB
The function that processes the data is: L_IDOC_INPUT_WMMBXY
Hope that helped a bit (for inbound)....
Regards
Rainer
Some points would be nice if that helped.

Goods movement in a retail using document splitting by profit center

Hello Gurus,
I am in a retail implementation, our requirement is to make a goods moviment from one store to another (where stores are profit centers). But they want to have zero balance document spliting by profit center. (balances by store)
Does any one know how could the document finally be posted if the original movement is:
1000 goods 40 profit center 1
1000 goods 40 profit center 2
Thanks in advance,
answer will be rewarded!
Alex

Hello Aravind
Pls check this link
http://help.sap.com/saphelp_erp2004/helpdata/EN/87/3da04028f40160e10000000a1550b0/content.htm
Maybe of some help.
Reg
suresh

Goods Movement on Order Confirmation

Hi all,
Whenever i issue a material while doing Order confirmation (IW41: Using goods movement option) , the material is issued but its cost doesnt get populated on the maintenance order. I guess i am missing some configuration end but can anybody guide me or give me hint where is the root cause lies of this problem.
Why the material cost is not getting populated on the maintenance order.
(Note: I am using my own Order Type not the standard one)

hi
I hope this is the problem in ur config
Plant Maintenance and Customer Service - Maintenance and Service Processing - Completion Confirmations - Define Control Parameters for Completion Confirmations
If u have tick at Materials, remove it
It will give only plan cost, not the actual cost
If u dont use this tick, you can do goods movement from iw41 and the cost will be calculated in the actual cost
- Pithan

KANBAN - STO (error : Goods movement not possible with mvmt type 351)

Hi,
I have configured KANBAN STO in the system which is working fine.
I am able to empty the bin and create STO (purchase orders)
But when I select a bin and try to make it full, system gives error message:
"Goods movement not possible with mvmt type 351"
In KANBAN STO replenishment strategy, I have used movement type 101,
I m little confused from where this 351 movement type is coming from.
Please help resolvethis issue.
Pavan

Hi,
Below is the entire message:
Goods movement not possible with mvmt type 351
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
Pavan

Goods receipt from production through scanner

Hello,
My client does the partial confirmation at the end of every shift. So this means that there will be Finished goods on the production floor for multiple production orders at the end of the shift.
The requirement is, they want to send the materials from production floor to warehouse in two step process for multiple production order and for multiple confirmations. First scan will be done by production floor worker and second scan will be done by warehouse worker to complete the process.
Please let me know the process, how to achieve this and how will the system determine the destination bin in case of goods movement from production floor to warehouse.
Regards
Prabhjot Singh

Hi,
In Standard SAP and RF transaction,
If GR is done for the order, system will generate a TO to place the stock in the warehouse bin, based on the stock placement strategy (thro stock placement indicator) it will search the correct bin location.
So TO will be generate automatically then you can scan the TO to confirm it through RF gun, warehouse staff can confirm the TO by scanning it (LM03).
If you need the GR to be done by the production staff by scanning the order number, you need to go with the development, so in the RF gun, they can scan the order and enter the qty to be received and in the back ground TO will be created and warehouse staff can scan and confirm the TO.
Thanks,
JK

Goods movement from PI sheet

Similar Messages

Maybe you are looking for