Goods movement in IW41

All,
I've got the issue that a non-stock-item (item category 'n'), which is shown in the components-list of a PM-order, doesn't appear in the table showing components for goods movements in IW41.
Eventually, this behaviour leads to the increase of stock, even though it has already been consumed by PM. Did anybody ever experience that issue?
Thx & regards,
Bobby

Hi Boban,
You wrote:
During the goods receipt, the costs are posted onto the PM-order and the stock is increased by the order quantity. When I confirm the operation in the order, the actual working hours are posted and the stock is NOT decreased.
This is not standard SAP behaviour, you have to check the account assignment category for the Purchase order. It should be F (order) The standard mvt is 101 but the stock is not updated. Cost will go to the PM order and booked on the gl account based on the valuation type of the material.
Check with the MM guys what they have changed, They have maybe used an enhancement to get the system act like that.
The problem can also be in the MM customzing of the material type, check this too. Maybe there you can change the settings that no stock update will take place.
Don't create a new movenemt type, the probelm can be fixed with standard SAP.

Similar Messages

Goods Movement on Order Confirmation

Hi all,
Whenever i issue a material while doing Order confirmation (IW41: Using goods movement option) , the material is issued but its cost doesnt get populated on the maintenance order. I guess i am missing some configuration end but can anybody guide me or give me hint where is the root cause lies of this problem.
Why the material cost is not getting populated on the maintenance order.
(Note: I am using my own Order Type not the standard one)

hi
I hope this is the problem in ur config
Plant Maintenance and Customer Service - Maintenance and Service Processing - Completion Confirmations - Define Control Parameters for Completion Confirmations
If u have tick at Materials, remove it
It will give only plan cost, not the actual cost
If u dont use this tick, you can do goods movement from iw41 and the cost will be calculated in the actual cost
- Pithan

IW42 does not show goods movement at opearation level but at header level

Hi Gurus,
If you add the goods movement using IW41, it stores it correctly against the operationa and shows in GI mat doc and in doc flow under opearation but the same does not happen in IW42. is there a way to do this in IW42 so that GI mat doc shows up under opearation when we add the goods movemnt to IW42 (its an unplanned Goods movement )

Look at the below thread.
Goods movement in Confirmation IW42,
In IW41, confirmation will be done at operation level, so that goods movement also will be done at operation level. But IW42, confirmation could have been done at order level. So goods movement will happen at order level. If you want at operation level in IW42, then in IW42 give order number & operation number (its almost doing same like IW41)

Marking "goods movement completed" automatically during iw41 in PM

Hi all,
I have a problem during iw41.
I asign material/components in component tab in order, and use t-code IW41 for confirmation, in this I confirm operation then click on goods movement icon, "completed" field is getting ticked automatically in this goods movement screen.
So when I change the amount of component to a lower quantity than planned quantity and come back and save, it is recorded as completed goods movement. But I don't want this goods movement with missing amount to be ticked as completed goods movement because it is recorded in tables as completed also.
Please kindly let me know how can I avoid this ticked automatically.
Thanks and Regards
Damlasu

As the component has been mentioned as Backflush in component tab of the order, Completed check box is selected in Goods movement screen.
Implicit meaning is that as it has been mentioned as Backflush, no more qty is required. I guess, there is no config to change this. Only using user exit or manually, we need to remove the tick.

Problem with goods movement during operation confirmation

Hello,
While doing the operation confirmation,the goods movement are not posted for the components attached to that operation i.e i am not getting the quantity of the components in the "goods movement" tab while confirming.
check points done: 1) Final confirmation tick is activated during ope. confirmation.
2) Backflushing is activated for material(componenets that areattached to that operation).
please let me know what is the reason for not getting the qty displayed in the "Goods Movement" tab
Thank you.
Regards
Santosh

hi
Normally if you activated the backflush for the material in the order,the material wont be displayed in the goods movement tab unless you activated the All materials in the parameters for confirmation in the intial screen of IW41
kindly check
regards
thyagarajan

COGI : how to display the time of a goods movement?

Hello,
through COGI, I get the good movements with error per material.
When I open the errors list for a material, I get the posting date for each good movements but not the time!
Could you please let me know how to do for displaying error time or posting time in this screen?
Thank you for your help!
François

Deleted

Confirmation of process order create : goods movement

Dear Sir/Madam ,
I am using the Transaction Code - CORK for confirmation of process order , but promblem is that when i am saving the goods for confirmation then material pi101 has some error i.e the material pi101 is locked by another user or something , then that is not confirmed but rest of the material which are having 531 movement are confirmed ,
so i want that if the first material i.e pi101 which has 101 movement that should be confirmed first then after that rest of the goods having 531 movent confirm,
i have already searched the userexit for transaction cork i.e CONFPI05 when saving the data and another one is CONFPI06 for Actual data transfer plz tell me what will be the logic and which structure to call in this userexit because in this userexit the structure which is present is not of use .
thanks and regards ,
arun

Hi,
I believe you would need to append the below line for your code for goods movement.
wa_timetickets-order_itno = p_itno. " Order item nos.
Check & revert if it resolves the issue.
Regards,
Vivek

Confirmation of Production Order without all Goods Movements

Hello experts!
I've tried to do a confirmation of one material that had only one level BOM with one material, but, when I try to do the Goods Movement in CO15, only the component appears. To another materials the goods movements was done for the two materials.
I've changed routing, BOM, material record... but I didn't have success.
Any ideas?
Regards,
Rodrigo.

Dear
You might have kept Backflashing Indicator -1 in MRP2 view and while doing CO15-In goods movement tab -You will find BOM compoenets with movement type -261 .But your requirement is to carry out the Auto GR-101 while confirmation posting .
Please do the following :
1.Goto -OPJK-Define Production Scheduling Profile -Here for that scheuling profile which have been assinged in Work Scheduling view -Mark the Auto GR active .
2.In the routing or in the Production Order -Operation Overview screen -Goto Operation Details -Slect the last operation -Assing the Operation Control Key which has Auto GR active like SAP Stanrda PP03 .Please check in OPJ8-Slect the Operation Control key -Hit the details information -Check the Auto GR Marked .Based on this while you will do CO15 , GR-101 (MIGO-101) will happen .
Hope it helps
Regards
JH

Goods movement with serial numbers

Hi,
1. Is there any report or table where I can see goods movement of material with their serial numbers?
2. Also in MMBE i can see 'On order stock'. I know this is PO open PO quantity.
Now this open PO qty will not be there against any storage location. I got some stock on this status in some storage location.
How I can move to 'unrestricted stock' status?
Please advice.

Hi
Check these tables,
SER00 General Header Table for Serial Number Management
SER01 Document Header for Serial Numbers for Delivery
SER02 Document Header for Serial Nos for Maint.Contract (SD Order)
SER03 Document Header for Serial Numbers for Goods Movements
SER04 Document Header for Serial Numbers for Inspection Lot
SER05 Document Header for Serial Numbers for PP Order
SER06 Document Header for Serial Numbers for Handling Unit-Content
SER07 Document Header for Serial Numbers in Physical Inventory
And in order to move On Order stock to Unrestricted you need to close those POs by doing GR.
Hope it helps
Rgds
ramesh

Goods movements of material with serial numbers

Hi,
1. Is there any report or table where I can see goods movement of material with their serial numbers?
2. Also in MMBE i can see 'On order stock'. I know this is PO open PO quantity.
Now this open PO qty will not be there against any storage location. I got some stock on this status in some storage location.
How I can move to 'unrestricted stock' status?
Please advice.

Hi,
Is Serial number is the one obtained thro stadard batch management or is it a Zfield.
On Order stock cannot be converted to unrestircted stock unless a GR is made.
With regards,
Jeeva

LAST GOODS MOVEMENT DATE wise report

Hi MM Experts
Is there any report through which we can find LAST GOODS MOVEMENT DATE ( goods receipt , issue date ).
i have tried MC.2 but in this report material , plant and sloc description is coming , i want code so that we can understand easily.
regards
anubhav

Hi,
To get the plant, material code with description in MC.2 transaction.
Please following below steps:
on output screen >>>
settings >> Characteriastics display >>> select key and description or only Key.
Regards,
Shailesh Mackwan

Goods Movement Status B in Delivery Header & C in Delivery Item???

Hi Frens,
I have created a delivery document whose Goods Movement Status is B in delivery Header and C in Delivery Item.
Can anyone explain, why it happened like this??
Regards,
CK

Hi
It may be due to some inconsistency. Please run the report RVDELSTA from SE38 to solve the status issue
regards,
Ramana

Goods Movement and Billing status at header level

Hello,
Im new to this topic and have some very basic questions
Will WBSTK field be updated with goods movement status for a given sales order number in VBUK table ?
Similarly, will FKSTK/FKSTK or BUCHK will be updated with billing status ?
I know that for a given delivery document number, I can track the status at the item level.
But my aim is to know the overall goods movement and billing status at the order header level.
Any clues will be of great help.
Thanking you in advance.
Regards,
Preethi

Hi Preethi,
A sales order does not determine a billing status for delivery related billing, field VBUK-FKSTK is only determined for delivey.
Just because of this, you will not find billing status field in VA03 -> goto header;
you could only find billing status field for delivery in VL03N -> status overview.
Best regards,
Crystal Lin

Tracking Goods movement based on Serial Number

Hi All,
I need expert advise on the following regarding the usage of Serial numbers from MM Perspective:
1. Whether the Number range for Serial Numbers can be given. This is to take care of the Goods bearing serial numbers, being delivered by the external vendor. I have two options: one to update the stock with the same serial number as given by the vendor & the second is to generate my own serial number for the material.
2. I also need to track the complete Goods movement based on the Serial Number of the material.
Pls advise asap.
Regards,
Shekhar.

Hi Kishore,
Thnx for your prompt response.
As requested, If I need to update the stock and want to continue with the serial number as given by the vendor (may be in the form of barcode), what config settings are reqd ?
Secondly, pls advise whether we can assign Number range to the Serial Numbers. Then we need to work upon situation where the serial number provided by the vendor is beyond the specified number range.
Pls advise.

Goods receipt inbound delivery using old goods movement transactions

Hi! I have a client who is still using the old goods movement transactions in the new ECC system. I would like to confirm whether it is possible at all to receipt inbound delivery (from shipping notification) using any of the old goods movement transactions? I don't seem to be able to find one that work.
Cheers!
SF

Yes, does anyone have any idea re this?
Cheers!
SF

Goods movement in IW41

Similar Messages

Maybe you are looking for