Goods movement list not showing EAN in Order Unit..!

Hi Guys,
               I have an issue with goods movment list (tcode MB26).
good movement list not showing EAN in Order Unit..!
EAN No. and Storage Bin is maintained in Material Master but its not showing up Goods Movement list.
Please find the screen shots.
Thanks
Sam

are you still in 46c release? for 46c exists an OSS note to fix the issue with the bin:202240 - Transaction MB26: Storage bin is not supplied

Similar Messages

  • Goods movement tab not coming in production order

    Dear PP Gurus,
    I  have created a production order  and done the partial  confirmation of this  production order.
    I am not able to see the Goods movement tab in the display.
    When i go to T CODE  CO14 and enter the order number .
    I am not able to see the goods movement tab .
    Please help.  I think i have misd something in config.
    Best regards

    Dear Aadi,
             At the time of Booking, You are not entered the good movement tab, thats why i you r not able tyo see the goods movement in the  diaplay of confrimation.
    If  U want  Material is to be posted at the time of confimation
    1 ) Then make a proper setting as backflush ( maintain the back flush In material master  MRP 2 View, or in work center or in routing ( component allocation screen
    2) to amake a Auto GR  for header material-   assign the control key with auto GR on the final operation in the routing ,
    3 )  Click the goods movemnt tab at the time of confrmation and change the quantity as per the actual consumption and Post
    4  IF u post the good movemnt at the time of confimation , you can see in the diapaly mode otherwise U cannot see the goods movement Tab
    regards,
    Sundaresan
    Edited by: Sundaresan . E. V on Mar 15, 2010 10:30 AM

  • Movie rental not showing up in play list even though I confirmed purchase - where did it go?

    Movie rental not showing up in play list even though I confirmed purchase - where did it go?

    Downloaded films (and those synced from your computer) should be in the Videos app (iTunes on the iPad is just the iTunes store) :

  • Documented goods movements list in cooispi.

    Hi,
    Even though there are goods movements w.r.t. process order, they are not getting displayed in cooispi in the List - Documented Goods Movements. What could be the reason for this?
    Thanks a lot..
    Madhavi S

    Hi Madhvi,
    U can also the "Documented good movement" at header view of  Process order .
    Please also check with "documentation of goods movement" settings at COR4 for process order /plant combination.
    Activate all the  check boxs  under Document good mvt table at Implementation tab in   COR4 & create new order and do goodsmovement   check with cooispi.
    Pradeep
    Edited by: Pradeep Kumar on Apr 9, 2008 10:15 AM

  • "Goods Movement type not possiable with mvmt type 261"

    Dear All,
    I am doing 541 movement with Service order combination, i have found following error,
    "Goods Movement type not possiable with mvmt type 261"
    Can you help me for this error.
    -Reards,
    Sunil

    Getting errors while using PI_GOODSMVT_CREATE' with 561+K

  • "Goods Movement" is not allowed (ORD 100020)

    When I do goods receipt via tcode MB1C and movement type 521 without production order number.An error occurs.
    "Goods Movement" is not allowed (ORD 100020)
    Message no. BS 007
    Diagnosis
    The current status of object 'ORD 100020' prohibits business transaction 'Goods Movement'.
    Procedure
    To process business transaction 'Goods Movement', you first have to change the status of object 'ORD 100020' to allow the transaction 'Goods Movement'.
    This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
    If I input a production order number in ORDER field of account assignment block,I can complete the action sucessfully.So I want to know the reason.Can you help me?

    Hi,
    Pls check with the status profile in OPJH.
    Check whether any user status has been set in that status prifile. ( say for ex .User status which forbids the the Goods receipt unless the Confirmations are completed )
    Regards,
    Sheik

  • Movies do not show up on AppleTV but they are in iTunes

    I have around 220 movies in iTunes.  Most all were purchased through Apple.  I am having an issue where several of my movies are not showing up on my Apple TV.  The movies that do not show up were all purchased and watched on my Apple TV but once it synced to my iTunes library they no longer show up.. I have reset and restored everything including my entire iTunes library, took almost an entire day, but still have the same issue.  My apple TV is a 1st gen. The ones that do not show up are a mix between HD and SD so that is not the issue.  The only common thread between these movies is that they were all purchased and watched initially through my apple TV. HELP please!

    As far as the resolution, I do not have the exact info but they were all purchased through iTunes via my AppleTV.
    Examples:
    - Journey to the Center of the Earth HD and SD
    - Tranformers HD and SD
    - Journey 2: The Mysterious Island SD
    - Sherlock Holmes SD
    Thats just a few of the movies that do not show up on my AppleTV but are in iTunes and can be played on my Laptop or synced to my iPad, iPod, iPhone and iTouch.
    I have tried syncing these movies to my AppleTV and it shows syncing but completes way too quickly and the movies are not on my AppleTV.  When I look at my AppleTV via iTunes the movies are checked off so as to sync.  No exclamation point or any error for that matter ever occurs.

  • Movie Controls Not Showing

    Hello Everyone,
    Here is the problem: I have posted movies to my web page, but the fast forward & reverse buttons at the bottom right of the movie are not showing up. I originally had kioskmode set to on, but have removed it since. I also tried exporting the movie with internet streaming-fast start enabled.
    Any suggestions?
    Here is an example - click "Placeholder" http://homepage.mac.com/badelstein/parti/port/splshscr/splshscr.html
    Thanks for the help. Bill

    Found out that CSS was calling out a div width smaller than the movie width - reset to movie width fixed problem.

  • Allowed goods movement indicator not ticked in Reservations

    Hi All,
    Currently when i am creating a shopping cart ,the reservations which are created in the backend system do not have the allowed goods movement indicator ticked.can we have it ticked automaticaaly like it is when we normally create the reseravtions manually.
    Regards,
    Pawan.

    Hi Pawan,
    Please check the following SAP OSS Notes as well -
    Note 373205 EBP: Allow goods movement indicator (manual addition)
    Note 373231 EBP: Allow goods movement ind. not in Customizing backend
    Note 447352 BBPPS01: Account assignment category of network component
    Note 373464 EBP:Reserv.Backnd ind.gds mvmnt permit.(3.1Plug-in)
    Note 322674 BBPOR01: Purchasing data are not displayed
    Note 520813 FAQ: BAPIs for goods movements
    Note 447352 BBPPS01: Account assignment category of network component
    The field MOVEMENT is not being filled by SRM in the standard.
    You should set it yourself in badi BBP_CREATE_BE_RS_NEW...”
    BR,
    Vijay Mittal.
    Please award the points for help.

  • Contact choice list not showing up on dial screen

    I have a large contact list in the address book and today the contact choice list not showing up on the dial screen when I press the first one or two letter of the contact name, for example, there are 2 contact in my address book, John Smith and John Joe, when I press "john", BB will filter the address list and show up 2 contacts above in the choice list, but it stop working today, any ideas? thank you.

    Never mind! If anyone else has this issue.... After trying numerous things , I simply turned iMessages off on ipad, restarted ipad and logged back in.

  • Goods Movement is not allowed  (WBS D-INC-051001)

    kindly help me in my problem in goods movement, i got this message "Goods Movement is not allowed  (WBS D-INC-051001)" how would i know when WBS is allowed or not allowed for goods movement.
    thanks.
    donna

    One of my users got this error message and require a solution.
    What I did was, require the Finance Team to release an account related to WBS.
    Once released, my user able to (Goods Issue) in a breeze.
    Do rate if this helps.
    Thank you.

  • Goods Movement" is not allowed (ORD 100000)

    I get the error below:
    Goods Movement" is not allowed (ORD 100000)
    How do I allow it?

    hi
    Check the REL status. Check whether your project/WBS/network has been released or not.(The network/activity should have an REL status set in the System Status
    field).
    regards
    kunal

  • Transparent pop up list not showing?

    Transparent pop up list not showing ?

    This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
    Just check if your business role is properly configured. Thats all i can say.
    Regards
    Kavindra

  • I ordered at around 12:30AM pacific and it does not show in my order history.  When I look it up on the order status page, it just says "received and processing".  Do I have any chance of getting it on friday?

    I ordered at around 12:30AM pacific and it does not show in my order history.  When I look it up on the order status page, it just says "received and processing".  Do I have any chance of getting it on friday?

    It seems to depend on a variety of different things.
    Verizon appears to be going by the process time of orders, and not the order time of orders.  Your process time will be the timestamp on your confirmation email.
    It also depends on which model, GB, and color you ordered.  The 6+ were in high demand and low supply.
    It also depends on which warehouse (order location) your order was being processed through.  Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
    There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely.

  • Tax field not showing in limit orders

    Hi,
    The tax field is not showing in limit orders, we need to be able to change it. Is there any way of doing this?
    John

    Hi John
    In SPRO,
    Tax settings
    No tax calculation
    No tax is calculated
    Tax calculation occurs in the R/3 System
    Tax calculation occurs via RFC in the R/3 System in Financial Accounting. If an external system is connected to the R/3 System (Vertex or Taxware, for example), this is automatically called from the R/3 System.
    What is the settings here.
    If you were setting is No tax calculation , no tax field will not be shown in basic data.
    update me.
    regards
    muthu

Maybe you are looking for