Goods Movement status of delivery not updated from C to A

Hi
I am facing a peculiar problem.
We reversed goods issue using VL09 however the goods movement status of the delivery has not been updated. The GM status is still showing C- Completely processed.
If we are trying to repeat the process again thinking that reversal has not been done using VL09 for that particular delivery error message is displaying already the goods reversed.
Here we are missing the link. Though the goods reversed status has not been reflecting in the delivery.
Regards
Maruthi
Edited by: MARUTHI RAM on Apr 18, 2009 1:25 AM

1)  First check in MB51 with movement type 602 whether you could see the delivery reference
2)  Next go to VOV7, select your item category and see what is maintained for the field "Completion Rule".  It should have been "B".
3)  Next go to VTLA, select the item category for the combination of your order type and delivery type and see whether you have maintained "+"  for the field "Pos./neg. quantity"
thanks
G. Lakshmipathi

Similar Messages

  • Billing status in delivery not updated for free-of-charge flow

    Hi,
    I have a free-of-charge flow: sales order-delivery-invoice. The invoice has the net value 0 and do not goes in accounting. The problem is that the billing status in delivery is still "not invoiced" and because of this i can make more invoices for the same delivery/qty. Why the status in not updated? The item categ is relevant for billing (A).
    Thanks.

    You can refer SAP Note 33258 - Processing free-of-charge items.
    Where they talk about Item cat setting, use of Cond Type R100.
    Regards
    JP

  • Status is not updated from delivery to sales order item.

    Dear Folks,
    One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
    Thanks & Regards,
    murali.

    Dear Murali,
    Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
    I hope it will help you,
    Regards,
    Murali.

  • Customize Movement Type : Reverse is not update the Serial No Status

    Hi All,
    Customize Movement Type : Reverse is not update the Serial No Status from ECUS to ESTO when reverse Delivery Order movement document.
    Mind to guide where to check this configuration problems.
    Thank you.

    Hi All,
    For the Customization Movement Type, Initial plan is copy from 602 but found out below different on Trans./ev serial no. Not sure the problems is from this site > How to change the configuration.

  • Inbound delivery goods movement status.

    Hi,
    Goods receipt is posted against an inbound delivery. Goods movement status shows as completed (Status C) in VL33N transaction. However when I look at delivery status in the table VBUP it shows the goods movement status as A.
    Does any one of you faced this issue. If faced what would be the root cause..?
    Is there any OSS notes available to correct this issue..?
    Please let me know your thoughts
    Thanks
    Umakanth

    Hi Fernando,
    Which transaction are you using for the posting?
    Please, consider that Inventory Management Transactions (MBxx, MIGO, etc) do not update the Inbound delivery status and document flow.
    If you use a Shipping Transaction like VL32N for the receipt, then this should update the delivery.
    You can see the SAP Note 199703 about this.
    As of Release ERP 6.0, MM transactions can update the inbound delivery if this has been activated in the customizing.               
    See the Note 1050944 in this regard:                                                                               
    "As of ERP 6.0, you can use inventory management transactions (MB0A, MIGO, MBST) to carry out the goods receipt for inbound deliveries in the standard SAP system in such a way that the inbound delivery that is relevant for goods movement is updated.(...)".                 
    If you are in this release or higher you might want to see this note.
    I hope this helps!
    Esther.

  • Goods Movement Status B in Delivery Header & C in Delivery Item???

    Hi Frens,
    I have created a delivery document whose Goods Movement Status is B in delivery Header and C in Delivery Item.
    Can anyone explain, why it happened like this??
    Regards,
    CK

    Hi
    It may be due to some inconsistency. Please run the report RVDELSTA from SE38 to solve the status issue
    regards,
    Ramana

  • The total goods movement status not changed after goods receipt using MIGO

    Dear gurus:
    when i use T-code MIGO doing goods-receipt against Inbound delivery, the total goods movement status don't changed. i tryed VL32N to do goods receipt, and the status changed.
    how can i do to make the status change when i receive goods in MIGO against inbound delivery?
    best wishes,
    David

    Hi,
    If your MM is integrated with WM (SU mgt or HUM) you have to post the GR with Inbound delivery.
    Amit

  • Document flow in Inbound delivery not updated as in PO History for the SA

    Hi,
    We have an SA with 2 line items. All GR's & IR's have been reversed for the line items in SA.
    The document flow incorresponding  Inbound delivery is not updated correctly for these line items.
    The GR have all been reversed with correct quantities. But, Document flow in Inbound delivery is not updated correctly.
    Hence, the goods movement status for these shows as Partially processed and completely processed.
    There is an inconsistency here.
    Please advice

    Hi
    Have you post the GR through VL32N and reverse VL09?
    Regards
    Eduardo

  • Form display based on Goods movement status

    Hi all,
    Delivery note should be printed only when VBUK-WBSTK (Total Goods movement status) is equal to C (Completely processed). Can this be done in a Smartform? If so how?

    Hi,
        Check the condition in driver program before calling the smartform.So that it will call the smartform based on condition.
    Thanks,
    suma.

  • Total goods movement status in SD module

    hi all,
    wht is "Total goods movement status" is SD module .
    can u explain me with an example and how can i use it in creating open return orders.
    thanks

    Can we do PGI from VL03N?  I dont think it is possible.  I can see that the PGI option is always in disabled mode in VL03N.
    You can only do PGI from VL02N
    Can you check whether a material document was created by clicking on  the document flow from VL03N ?  What happens when you do the PGI for the same delivery again in VL02N?
    Regards,

  • Movies list done in Notes updated to my Blockbuster account w/o my knowledge. Security issues?

    Movies list done in Notes updated to my Blockbuster account w/o my knowledge. Security issues?
    How was this possible?

    Ok, let me explain:
    One day at Blockbuster store I started to make a list on Notes app on my iPhone with movies that I want to add to my BB online queue when I get home (for DVD mail in delivery, just like Netflix used to be). All good so far. Few days later the list it's not in Notes anymore and when I checked my BB account the movies that were on the list I made in Notes are now in my BB queue. How was the list moved, the accounts are not linked, don't even think it's possible to link Notes with BB anyway.

  • Total goods movement status using structure 'LEDLVSTATDISPHEAD'

    Hi,
    I'm trying to get the 'Goods movement status' for a Delivery once PGI posting is done. However the tables VBUK & VBUP maintain this status at Sales order line item level. This doesn't give the correct picture in cases where there are more than 1 Delivery for a Sales order line item.
    At Delivery level the 'Goods movement status' leads to a structure 'LEDLVSTATDISPHEAD'
    Please advice how to get a field value (for goods movement status) using this structure ...
    Thanks & Rgds,
    Pradeep

    Hi-
    Just wondering to know how you were able to resolve the issue. i am facing similar situation, can you please let me know how was this sovled.
    Thanks.
    Ramesh

  • Delta records not updating from DSO to CUBE in BI 7

    Hi Experts,
    Delta records not updating from DSO to CUBE
    in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
    I cheked in Change log table in DSO its have 5 records
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -  -1
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
    ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
    but active data table have one record - 0
    how to corrcct the delta load??
    Regards,
    Jai

    Hi,
    I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
    Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
    The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
    The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
    Is this not what you see in the cube? were the earlier req deleted from the cube?

  • After I sync with iTunes my iPad Calendar is not updated from my computer where I keep my dates on Abacus. It used to do this. What's wrong?

    After I snync with iTunes my iPad Calendar is not updated from my computer where I keep my dates in Abacus. It used to do this.

    Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

  • Lync 2013 Photos will not update from AD

    I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs;  Replicate this attribute to the Global
    Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
    "Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"  
    and finally we are setting the photo in ad using:
    "Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
    The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
    also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
    EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
    do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

    Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
    What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
    this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
    it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
    but unfortunately no change on my Client. I still see these users original photos.
    Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
    the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
    We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
    More info on the environment:
    4 main sites + remote users
    ~7DC's - 2003 DFL (1 at each site + a few at HQ)
    3 Lync Front end servers (2013) (All located at central HQ)
    2 Lync edge server (2013) (All located at central HQ)
    1 - 2010 Exchange server (Located at central HQ)
    2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
    About 100 HP 4110 Lync Edition Desk phones
    Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

Maybe you are looking for

  • PO archiving

    My settings in config are Residence time 1 is 730 and residence time 2 is 365 This means if there is no change in PO for 730 days then deletion indicator will be set. Then after 365 days , the PO will be deleted from the data base. 1. I guess for res

  • User account errors and some work-arounds

    1. Migrate multiple users, but second on no set up correctly I had this when I tried to migrate one user then a second as a subsequent migration. Home directory was created but no user was created in Sys Prefs. Sadly, the user name was created in the

  • ABT1N   Account **  requires an assignment to a CO object

    Hi Dear,i am using tcode ABT1N to transfer asset within inter-com entity,but i got error "Account ******** requires an assignment to a CO object" my understand is cost center already entered in asset,then that GL will auto-derive cost center from ass

  • All agents become not ready Suddenly

    Does any one know what could be the reason why all the agents suddenly become not ready ? -Agents state after ring no answer set to : Ready -Automatic work and wrap up time disabled. -No skills,resource group based queue and circular call distributio

  • JDBC and Classpath problems on OpenVMS

    Hello, I'm working on an OpenVMS server and I got a simpler Java application that needs to establish a connection to an Oracle database, the application works perfectly well on Windows but when I moved to OpenVMS I got some problems with the oracle d