Goods Movement user-exit - message capable
I am searching for a user-exit during goods movement. I have found several enhancements (MCBF*) but none of them allow me to set an error message if a specific condition exists. None of the enhancements contain a message-id statement.
I want to test the goods movement before it is posted for a condition and if true, display an error message and thereby prevent the goods movement from happening.
Thanks for the help.
Maggie
<i>None of the enhancements contain a message-id statement.</i>
Remember, you need not have the message class defined using the message-id statement. You can write the message as.....
MESSAGE E001<b>(00)</b> with 'The message Text'.
Here you are specifying the message class 00 in parenthesis.
Regards,
Rich Heilman
Similar Messages
-
Value of the goods movement is negative: Message no. M7301
HI,
In subcontracting process while receiving the goods from subcontractor following error is coming " Value of the goods movement is negative:"Message no. M7301.
pls tell me why this error is coming and how to solve it
thanks & regards
vrHai,
Ur parent material cost is less tahn the components cost. make correction of price in parent material.
regards,
BSK -
hi all
i am giving an error message in a user exit the error message comes as a pop up and moving ahead takes me out of the transaction i seriously donot want this.
even worning messages are coming as success ones
is there a way out for giving error msg
regards
navjotPost details of the transaction code you are trying to issue the message in, and of the exit you are using.
Often transactions have multiple user exits, and you may be using the wrong one to issue the message.
In some cases like Purchase Orders you need to call SAP code / macros to add the message to a list of messages that the standard screen will then display.
Andrew -
User-Exit message for Purchase Order
Hello,
I've implemented a specific type of message (ZNEU) for purchase order.
With some specifics conditions (not managed in SPRO), I'd like that the ouput message of a purchase order is either the standard one NEU or my specific ZNEU..but noth both as actually.
Is there any user-exit where I can code and change the ouput message determination ?
Thanks a lot in advance.
Best regards
Fanny PONEL ( GROUX).No user exit for this but this can be control by MN04.
Here you can control the ouyput type trigger
youmay need to configure the access seq and maintian that for your ZNEU conditon. -
MIGO-Goods receipt - user exit/BADI to process IDOC Outbound
Hi all,
i need to process an IDOC in outbound after a GR has been posted. I used the BADI MB_MIGO_BADI with method 'POST_DOCUMENT' but the transaction does not go in it...please helplHi Abap12,
1. IDoc creation should be enabled by message determination.
2. If BADI MB_MIGO_BADI method 'POST_DOCUMENT' is not executed the GR is not posted or the BAdI implementation is not active. Deactivation and re-activation helps sometimes.
Regards
Clemens -
Hi,
I want to override a system message which says 'revision level does not exist for Material... while creating the PO with reference to PR through ME21.
I want make this error message as warning message.
i have serached SPRO->Material management->Purchase->Environment data.
But this message is not available. Can any one of giude me how to do that?
Regards,
Anu.Hi,
Check for the system messges in ECM ( Engineering Change Management) . Potentially this should be available in Cross application products or Logistics Genaral
In the message number, change to warning for from Error.
Regards
Mani
Message was edited by:
Manikanda Ilango S.
Message was edited by:
Manikanda Ilango S. -
User exit for incoming PO - (PO is created by CIFing TLB order to R/3)
Hi All,
I need to find out the APO INBOUND user exit for reciving the PO information from the connected R/3 system. Initially a TLB order is created in APO and CIFed to APO and after the PO is created in connected R/3 system this PO number and related information is CIFed back to APO and this TLB order is replaced by the R/3 PO number.
Please help me outto gain full points.
Thanks in Advance,
Chandan DubeyHi,
I am not clear with ur query and therefore check out the list of Inbound and outbound Idoc user-exits:
IDoc Inbound User Exits
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
IDoc Outbound User Exits
72. ACCONF
Confirmation of IDoc processing from the application
ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73. ACLPAY
Accounting: Inbound invoice
ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74. ACPJMM
Posting in accounting from materials management
ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76. BLAORD
Purchasing contracts
MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77. BLAREL
Purchasing contracts
MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78. COND_A
Conditions: master data for price determination
VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81. DELPKB
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82. DIRDEB
Preauthorized withdrawal
FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87. FIDCMT
Sending single items for FI-GL
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88. FIPAYM
Payment data
FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90. GSVERF
Cred. memo procedure
MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92. INFREC
Purchasing info record
MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93. INVOIC
Invoice / Billing document
LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94. KANBAN
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96. MATMAS
Material Master
MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100. PAYEXT
Extended payment order
FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101. PICKSD
Picking data confirmation to customer delivery
VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102. PRDCAT
Product Catalog
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103. PRDPOS
Product catalog item
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104. PRICAT
Price list / catalog
VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106. REMADV
Payment advice
FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107. REQOTE
Inquiry
VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108. SRCLST
Source List
MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109. SRVMAS
Master data service master
BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110. SYPART
Partner profiles
SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111. TPSDLS
Shipping planning system: Transfer delivery
V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112. WBBDLD
Assortment list: Material data
WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113. WMCATO
Reversal/Reversal request for transfer order
MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114. WMINVE
Inventory count input
MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115. WMRREF
Release reference number
MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116. WMTORD
Transfer order
MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117. WP_EAN
POS interface: Upload / Download EAN assignments
WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118. WP_PER
POS interface: Upload / Download person data
WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119. WP_PLU
POS interface: Upload / Download material master
WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120. WPDCUR
POS interface: Download exchange rates
WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121. WPDNAC
POS interface: Download products
WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124. WPDTAX
POS interface: Download tax rates
WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125. WPDWGR
POS interface: Download material group master
WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127. WTADDI
Additionals
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128. WTADDI_CVB1
Additionals w/o 06
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
Link for the same:
http://erpgenie.com/abaptips/content/view/302/62/
Pls reward helpful points.
Regards,
Ameet -
User Exits for Inbound Process
hi all
can any one please give some example user exits in inbound process and explain the omportance of user exits
Thank you,
Swapnahi
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
Types of User exits
1. Menu Exits
2.Function exits
3.Table exits
4.Screen exits
5.Keyword exits
6.Field exits.
also refer to the links below.. can get more info on user exits
list of user exits
http://www.planetsap.com/userexit_main_page.htm
can also get the list of user exits thru..
Tcode: CMOD -> Utilities -> SAP Enhancements -> F8 Execute
User Exits Notes:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/8c5738ee806b0ee10000009b38f889/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
below are some of the useful invound and outbound userexits
<b>IDoc Inbound User Exits</b>
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
<b>IDoc Outbound User Exits</b>
72. ACCONF
Confirmation of IDoc processing from the application
ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73. ACLPAY
Accounting: Inbound invoice
ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74. ACPJMM
Posting in accounting from materials management
ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76. BLAORD
Purchasing contracts
MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77. BLAREL
Purchasing contracts
MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78. COND_A
Conditions: master data for price determination
VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81. DELPKB
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82. DIRDEB
Preauthorized withdrawal
FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87. FIDCMT
Sending single items for FI-GL
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88. FIPAYM
Payment data
FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90. GSVERF
Cred. memo procedure
MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92. INFREC
Purchasing info record
MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93. INVOIC
Invoice / Billing document
LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94. KANBAN
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96. MATMAS
Material Master
MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100. PAYEXT
Extended payment order
FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101. PICKSD
Picking data confirmation to customer delivery
VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102. PRDCAT
Product Catalog
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103. PRDPOS
Product catalog item
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104. PRICAT
Price list / catalog
VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106. REMADV
Payment advice
FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107. REQOTE
Inquiry
VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108. SRCLST
Source List
MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109. SRVMAS
Master data service master
BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110. SYPART
Partner profiles
SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111. TPSDLS
Shipping planning system: Transfer delivery
V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112. WBBDLD
Assortment list: Material data
WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113. WMCATO
Reversal/Reversal request for transfer order
MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114. WMINVE
Inventory count input
MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115. WMRREF
Release reference number
MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116. WMTORD
Transfer order
MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117. WP_EAN
POS interface: Upload / Download EAN assignments
WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118. WP_PER
POS interface: Upload / Download person data
WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119. WP_PLU
POS interface: Upload / Download material master
WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120. WPDCUR
POS interface: Download exchange rates
WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121. WPDNAC
POS interface: Download products
WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124. WPDTAX
POS interface: Download tax rates
WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125. WPDWGR
POS interface: Download material group master
WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127. WTADDI
Additionals
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128. WTADDI_CVB1
Additionals w/o 06
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
===
User exits for Pricing.
1.USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ
2.USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
3.USEREXIT_FIELD_MODIFICATION
4.USEREXIT_FIELD_MODIFIC_KZWI
5.USEREXIT_FIELD_MODIFIC_KOPF
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
====
Reward if USeful
Thanx & regards
Naren.. -
hi
i want to know conceptually what are User Exits and varients , what is the purpose of using these .
iAftr learing that i want to a practical example on both topics then , if any one have some good material on these plz send me on [email protected]
thanxHi
User Exits in FI/CO
R/3 provides three "customization spots" that allow you to enhance FI/CO features without modifying the standard code. Although often collectively referred to as "user exits," two of the three have different names. SAP Enhancements are used to expand the standard functionality within SAP. Enhancements use function modules and are called from the standard SAP code. Each module in the system has a set of delivered enhancements that help companies expand the standard functionality where they need it. Enhancements were new in release 3.0.
The Open FI Interfaces or Business Transaction Events are also used to expand the standard functionality within SAP. These events are defined in the IMG. Business Transaction Events were new in release 4.0. They are not available for all modules and are not called on all integrated transactions into FI as of release 4.5B. This will change with each release and should be retested.
The older User Exits in FI/CO are "Z" programs that are defined in table T80D for client-dependent user exits, and in table T80I for client-independent user exits. These are also used to expand the standard functionality within the FI/CO modules. These User Exits have been available since the early releases of SAP. All of these FI/CO User Exits are listed in this document in the Configuring User Exits (Older). The list is included because these User Exits are not a part of the Enhancements or Business Transaction Events and do not have an Info System for searching.
Benefits
Standard SAP functionality can be enhanced without modification to the standard code.
Upgrades do not erase the functionality and it does not have to be re-transported or re-entered into the system. The enhancements should be thoroughly tested when upgrading to ensure the system will still work as implemented.
Configuring SAP Enhancements
Basic Steps in Configuring an Enhancement
Find the appropriate Enhancement.
Enter the ABAP code in the "Z" program within the function module.
Create a project.
Add the Enhancement to the project.
Activate the project.
Example Business Scenario for Enhancements
Company A has a requirement to validate all customer master records created with a U.S. address. The U.S. entity reports on the industry field on the customer master. This is only a U.S. requirement and should not be required for the other countries, so the field status would not work. To accomplish this requirement, Company A will need to set up an Enhancement for the customer master transaction. The necessary steps are detailed below with screenprints. This example was configured in a 4.6C system.
Detailed Steps
1. Tools ABAP Workbench Utilities Enhancements Definition Utilities List Enhancements
2. Do not execute this without any parameters! There are too many Enhancements and it will probably time out. Youre searching for a customer master exit. Enter mast in the short text (see Figure 1). Youll start there. Searching for an exit can be tricky, so make sure you try several things before giving up.
3. Execute the search.
Figure 1. Start Your Search for a Master Exit Here
4. Look through the list until you find the Enhancement for User exits: Customer Master Data.
5. Double-click on the enhancement SAPMF02D. This will take you to the details of the Enhancement and list the function modules included in the Enhancement.
6. To continue, double-click on the function module EXIT_SAPMF02D_001
7. This will take you to the source code for the function module. Click on the Import tab to review the tables/fields that are available for the Enhancement (see Figure 2).
Figure 2. The Tables That Are Available for the Enhancement
8. To view the tables/fields that can be changed in the function module, click on the Export and Changing tabs. For this function module, these tabs are empty because you can only validate data. You cannot change any fields in this enhancement.
9. Return to the Source Code tab.
10. Scroll down until you see the Include statement in the program. The "Z" program listed after the Include is where your code will be written (see Figure 3).
Figure 3. Your Program Will Begin After the Include Statement
11. Double-click on the Include. You will be prompted to create the include. Click on Yes to create.
12. At this point you will be prompted to enter a development class and to create a transport request. If you do not know which development class to use, please contact your technical team.
13. Enter the following ABAP code into the program (Figure 4):
User exit to ensure that all US customers have a group key
entered on the customer master.
if i_kna1-land1 = 'US' and
i_kna1-brsch = ' '.
message e001(F2).
endif.
Figure 4. The ABAP Code You Need to Enter
14. Note that the table name matches the table name in the import tab tables.
15. In this example you are using the standard message class F2 with message number 001. Normally, you will create your own message within your own message class. All customer message classes must begin with a "Z" and are created in transaction SE91.
16. Save the program.
17. The next step is to create the project. Go to transaction code CMOD or follow menu path: Tools ABAP Workbench Utilities Enhancements Project Management.
18. Enter the project name; begin the name with a "Z."
19. Click on the Create button.
Figure 5. Click on Create After You Type in the Project Name
20. Enter in a description for the project.
21. Click on the Enhancement Assignments button.
22. You will be prompted to save the enhancement. Click on Yes.
23. At this point you will be asked for a development class and to create a transport for the project. You may use the same one created when adding the ABAP code to the function module.
24. Enter the name of the enhancement SAPMF02D (see Figure 6).
Figure 6. Enter the Name of the Enhancement Here
25. Save the project.
26. Back out of the enhancement assignment.
27. Activate the project by hitting the Activate button.
The SAP Enhancement is ready to be tested! Try creating a customer with U.S. as the country and a blank group key. Be sure to test one with a group key to make sure the message is not displayed in error as well.
Configuring Business Transaction Events
Basic Steps in Configuring an Event
Make sure the application is active for Business Transaction Events.
Copy the sample interface function module into a "Z" function module.
Enter the ABAP code into the source code section of the new "Z" function module. You may choose to create a "Z" program to enter the code into and then insert the "Z" program into your function module source code.
Activate the function module.
Assign the function module to the event, country and application.
Example Business Scenario for Business Transaction Events
Company A would like to copy the group key field from the vendor master into the allocation field on all the line items within a vendor invoice and payments, including the vendor lines. This requirement assumes only one vendor is posted to in a document.
To accomplish this requirement, Company A will use the Business Transaction Event 1130, Post Document: SAP Internal Field Substitution.
1. IMG Menu Path: Financial Accounting Financial Accounting Global Settings Use Business Transaction Events Environment Infosystem (Processes).
2. Find the correct Business Event. You are updating a field, so you select the Processes Info System instead of the Publish and Subscribe Info System.
3. Execute the search with the defaults.
4. Find the correct interface for updating a document: Post Document: SAP- Internal Field Substitution (see Figure 7).
Figure 7. Find the Correct Interface for the Business Event
5. Put your cursor on the event and click on the Sample Function Module button.
6. You are now in transaction SE37 Function Builder. This is the function module (sample_process_00001130) you will need to copy into a "Z" name function module for your coding (see Figure 8).
Figure 8. This Is the Function Module You Need to Copy Your "Z" Name Function Module
7. Click on the Copy button.
8. Enter the "Z" function module name in the To Function Module field (see Figure 9).
9. Enter a Function Group. If you need to create a "Z" function group, go to transaction code SE37 and follow menu path: Go to Function Groups Create Group. A function group is a logical grouping of function modules, and the ABAP code is generated for function groups. You will be prompted for a development class and transport when creating the function group.
Figure 9. Enter Your "Z" Function Module Name Here
10. In Function Builder (transaction SE37), enter the new "Z" function module. Click on the Change button.
11. The system will default into the source code screen where you may enter your ABAP code.
12. Notice the tables available for the code. Additional tables may be declared if necessary.
13. Enter the following source code (see Figure 10):
tables: lfa1.
data: z_groupkey like lfa1-konzs.
z_groupkey = ' '.
loop at t_bseg.
check for vendor lines. If one is found, read the vendor master and
retrieve the group key field.
if t_bseg-koart eq 'K'.
select single konzs from lfa1 into z_groupkey
where lifnr = t_bseg-lifnr.
endif.
Move the group key field into all line items allocation field.
loop at t_bsegsub.
t_bsegsub-zuonr = z_groupkey.
modify t_bsegsub index sy-tabix.
endloop. "t_bsegsub
endloop. "t_bseg
Figure 10. The Screen Where You Enter Your Source Code
14. Save the function module.
15. Back out to the main Function Builder screen by clicking on the green arrow button.
16. Activate the function module by clicking on the Activate button (see Figure 11).
Figure 11. Activate the Function Module from This Screen
17. Assign the function module to the event in the IMG: Financial Accounting Financial Accounting Global Settings Business Transaction Events Settings Process Function Modules of an SAP Appl.
18. Hit enter past the warning messages that this is SAP data.
19. Click on the New Entries button.
20. Enter the process for your interface. In your example it is 00001130.
21. Enter the country the interface is valid for. If it is valid for all countries, leave this field blank.
22. Enter the application the interface should be called for. If it should be called for all applications, leave this field blank. Please note that not all integrated transactions are programmed to go through these interfaces! You will need to test to find out!
23. Enter the new "Z" function module (see Figure 12).
Figure 12. Enter Your New "Z" Function Module Here
24. Save the settings. At this point you will be prompted for a CTS number for the configuration change.
25. The Business Transaction Event is complete! You are ready for testing.
Configuring User Exits (Older)
Basic Steps in Configuring an User Exit
Create a "Z" program for the User Exits and enter the necessary ABAP code.
Enter the new program name into table T80D.
Configure the application to call the User Exit.
List of User Exits
Variable Field Movements
Substitutions in FI, CO, PCA
Validations in FI, CO, PCA
Rollups in SPL
Fixed Field Movements in SPL
Cost Center Summarization on Detail Screen
Sets Formula Variables
Example Business Scenario for User Exits
Company A would like to add a "Z" field in the Special Purpose Ledger to capture a Business Unit field for reporting. They have used all the standard SAP fields such as Business Area and Profit Center. The field will only be used for reporting and is only needed in the Special Purpose Ledger. You created a special ledger table (ZZSPL1) with field Z_BUNIT and need to populate this field based on a combination of G/L account, fund and functional area.
To accomplish this requirement, Company A will use the Variable Field Movement User Exit. To make maintenance easier, table ZZBUSUNIT was created with the G/L account, fund and functional area fields as key fields, and the business unit field as a non-key field. You generated the table maintenance so the table could be updated using transaction SM30. SAP users update the business unit determination rules in table ZZBUSUNIT by entering the G/L account, fund and functional area, and then the business unit that combination should be posting to. The User Exit will read table ZZBUSUNIT using the G/L account, fund and functional area from the posting transaction and determine the business unit. The steps for using the user exit are detailed below. This example was created on a 4.6C system.
1. Copy the delivered template User Exit program RGIVU000_TEMPLATE into a "Z" program. Follow menu path Tools ABAP Workbench Development ABAP Editor (transaction code SE38). In early releases, the delivered program was RGIVU000.
2. You will be prompted for a development class and a transport. Please check with the technical team for the correct development class.
3. At the initial ABAP Editor screen, enter your new "Z" program name, select the Source Code button and click on Change (see Figure 13).
Figure 13. To Enter Your New Code, Select Source Code and Click on the Change Button
4. Enter the following code in the User Exit (Figure 14):
FORM E01_MVC USING FROM_FIELD TO_FIELD.
to_field = 'CORP'. "Set a default business unit.
read table zzbusunit to determine the business unit field.
select single z_bunit from zzbusunit into to_field
where hkont = accit_glx-hkont and
geber = accit_glx-geber and
fkber = accit_glx-fkber.
ENDFORM.
Figure 14. Enter Your New Code at This Screen.
5. Activate the program by clicking on the Activate button.
6. Change the configuration in the User Exit table to point to your new "Z" program.
7. Follow the IMG menu path: Financial Accounting Special Purpose Ledger Basic Settings User Exits Maintain Client Specific User Exits.
8. The entry to maintain is application area GIMV: Variable Field Movement. Enter your "Z" program (see Figure 15).
Figure 15. Enter Your "Z" Program in the Application Area GIMV: Variable Field Movement
9. Save the changes.
10. The final configuration step is to assign the User Exit in the variable field movement for your special ledger table. In the IMG: Financial Accounting  Special Purpose Ledger  Basic Settings  Master Data  Maintain Field Movements. Field movements control how the fields in a special ledger table are populated. They can be populated straight from other fields in a posting or through User Exits.
Figure 16. After You Assign the Business Unit Field and the G/L Account, the Exit Field Should Contain U01.
11. Assign the business unit field as a receiver and the G/L account as the sender. The Exit field should contain U01 (see Figure 16).
12. The User Exit number U01 calls User Exit E01_MVC form in the "Z" program.
13. Save the field movement.
14. You are ready to test your User Exit! -
User exit for transaction MB1A
Hi ....
Can anybody help me out to find the User Exit For MB1A Transaction ...?Hi,
Following BADI's are available in MB1A.
ALV_SWITCH_GRID_LIST ALV: Customer Exit for Switch Grid to List
FAGL_PERIOD_CHECK Posting Period Check
MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
MB_DOCUMENT_BADI BAdIs During Creation of a Material Document
MB_DOCUMENT_BADI_SAP BADI for Creation and Changing of a Material Document
MB_DOCUMENT_BADI_SAP BADI for Creation and Changing of a Material Document
MB_DOC_BADI_INTERNAL BAdIs During Creation of a Material Document (SAP Internal)
MB_ME_CSGMT_BADI_SAP BAdI: Consignment Processing - Stock Transfer
MB_QUAN_CHECK_BADI BAdI: Item Data at Time of Quantity Check
MB_STOR_LOC_BADI_GTS BADI to Check and Change Storage Location (GTS Fct. Only)
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
VB_SLED_MANAGEMENT Control of Shelf Life Expiration Date Processing
W_RETAILSYSTEM_IDENT Identification of the System Configuration 'SAP Retail'
and below customer exit
MBCF0005 Material document item for goods receipt/issue slip
MBCF0007 Customer function exit: Updating a reservation
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
STATTEXT Modification exit for formatting status text lines
PPCO0009 Enhancement in goods movements for prod. process order
IQSM0007 Serial numbers, user exit for goods movements
MWMTR001 Exits at the end of transfer rqmnt creation (IM,PP interf.)
MCB10001 BCO: Statistics update of material movements and inventory
MGA00003 Material Master (Industry and Retail): Number Display
MGA00003 Material Master (Industry and Retail): Number Display
QAAT0001 Inspection type determination different from variant 01
QAAT0002 Control of acceptance lots/goods receipt
QPL10007 QM: Inspection lot creation - change QM order type
SAPLMHD1 Shelf life expiration date
WBWE0001 Function exits for valuation for structured materials
MBCF0002 Customer function exit: Segment text in material doc. item
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
MBCF0006 Customer function for WBS element
MBCF0009 Filling the storage location field
MBCFC010 Propose batch number on Inventory Management item screen
Check which one is suitable for you. If BADI then implement in se19 and for customerexit in CMOD.
Thanks -
hi all ,
i want to learn user exits , how to use them and what are the uses of user exit ... can any one tell me the best link or documentation to learn user exits from the basics..
it will be great favour and person will be rewarded with points
Thanks and regards
nikesh kumarcheck the foll link,
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
also refer
http://www.sap-img.com/abap/what-is-user-exits.htm
Creating menu exits
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
For screen exits.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
chech these links for user exists its usefull
http://www.allsaplinks.com/user_exit.html
http://help.sap.com/saphelp_47x200/helpdata/en/dd/561602545a11d1a7020000e829fd11/frameset.htm
http://www.sap-basis-abap.com/sapab013.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
refer
just refer to the link below for step by step procedure with screen shots
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb2d40358411d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/10/e7dbde82ba11d295a40000e8353423/content.htm
http://fuller.mit.edu/tech/dialog_programming.html
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
Also, refer this:
Overview
R/3 provides three "customization spots" that allow you to enhance FI/CO features without modifying the standard code. Although often collectively referred to as "user exits," two of the three have different names. SAP Enhancements are used to expand the standard functionality within SAP. Enhancements use function modules and are called from the standard SAP code. Each module in the system has a set of delivered enhancements that help companies expand the standard functionality where they need it. Enhancements were new in release 3.0.
The Open FI Interfaces or Business Transaction Events are also used to expand the standard functionality within SAP. These events are defined in the IMG. Business Transaction Events were new in release 4.0. They are not available for all modules and are not called on all integrated transactions into FI as of release 4.5B. This will change with each release and should be retested.
The older User Exits in FI/CO are "Z" programs that are defined in table T80D for client-dependent user exits, and in table T80I for client-independent user exits. These are also used to expand the standard functionality within the FI/CO modules. These User Exits have been available since the early releases of SAP. All of these FI/CO User Exits are listed in this document in the Configuring User Exits (Older). The list is included because these User Exits are not a part of the Enhancements or Business Transaction Events and do not have an Info System for searching.
Benefits Standard SAP functionality can be enhanced without modification to the standard code.
Upgrades do not erase the functionality and it does not have to be re-transported or re-entered into the system. The enhancements should be thoroughly tested when upgrading to ensure the system will still work as implemented.
Configuring SAP Enhancements
Basic Steps in Configuring an Enhancement
Find the appropriate Enhancement.
Enter the ABAP code in the "Z" program within the function module.
Create a project.
Add the Enhancement to the project.
Activate the project.
Example Business Scenario for Enhancements
Company A has a requirement to validate all customer master records created with a U.S. address. The U.S. entity reports on the industry field on the customer master. This is only a U.S. requirement and should not be required for the other countries, so the field status would not work. To accomplish this requirement, Company A will need to set up an Enhancement for the customer master transaction. The necessary steps are detailed below with screenprints. This example was configured in a 4.6C system.
Detailed Steps
1. Tools ABAP Workbench Utilities Enhancements Definition Utilities List Enhancements
2. Do not execute this without any parameters! There are too many Enhancements and it will probably time out. Youre searching for a customer master exit. Enter mast in the short text (see Figure 1). Youll start there. Searching for an exit can be tricky, so make sure you try several things before giving up.
3. Execute the search.
Start Your Search for a Master Exit Here
4. Look through the list until you find the Enhancement for User exits: Customer Master Data.
5. Double-click on the enhancement SAPMF02D. This will take you to the details of the Enhancement and list the function modules included in the Enhancement.
6. To continue, double-click on the function module EXIT_SAPMF02D_001
7. This will take you to the source code for the function module. Click on the Import tab to review the tables/fields that are available for the Enhancement
The Tables That Are Available for the Enhancement
8. To view the tables/fields that can be changed in the function module, click on the Export and Changing tabs. For this function module, these tabs are empty because you can only validate data. You cannot change any fields in this enhancement.
9. Return to the Source Code tab.
10. Scroll down until you see the Include statement in the program. The "Z" program listed after the Include is where your code will be written
Your Program Will Begin After the Include Statement
11. Double-click on the Include. You will be prompted to create the include. Click on Yes to create.
12. At this point you will be prompted to enter a development class and to create a transport request. If you do not know which development class to use, please contact your technical team.
13. Enter the following ABAP code into the program
User exit to ensure that all US customers have a group key
entered on the customer master.
if i_kna1-land1 = 'US' and
i_kna1-brsch = ' '.
message e001(F2).
endif.
The ABAP Code You Need to Enter
14. Note that the table name matches the table name in the import tab tables.
15. In this example you are using the standard message class F2 with message number 001. Normally, you will create your own message within your own message class. All customer message classes must begin with a "Z" and are created in transaction SE91.
16. Save the program.
17. The next step is to create the project. Go to transaction code CMOD or follow menu path: Tools ABAP Workbench Utilities Enhancements Project Management.
18. Enter the project name; begin the name with a "Z."
19. Click on the Create button.
Click on Create After You Type in the Project Name
20. Enter in a description for the project.
21. Click on the Enhancement Assignments button.
22. You will be prompted to save the enhancement. Click on Yes.
23. At this point you will be asked for a development class and to create a transport for the project. You may use the same one created when adding the ABAP code to the function module.
24. Enter the name of the enhancement SAPMF02D (see Figure 6).
Enter the Name of the Enhancement Here
25. Save the project.
26. Back out of the enhancement assignment.
27. Activate the project by hitting the Activate button.
The SAP Enhancement is ready to be tested! Try creating a customer with U.S. as the country and a blank group key. Be sure to test one with a group key to make sure the message is not displayed in error as well.
Configuring Business Transaction Events
Basic Steps in Configuring an Event
Make sure the application is active for Business Transaction Events.
Copy the sample interface function module into a "Z" function module.
Enter the ABAP code into the source code section of the new "Z" function module. You may choose to create a "Z" program to enter the code into and then insert the "Z" program into your function module source code.
Activate the function module.
Assign the function module to the event, country and application.
Example Business Scenario for Business Transaction Events
Company A would like to copy the group key field from the vendor master into the allocation field on all the line items within a vendor invoice and payments, including the vendor lines. This requirement assumes only one vendor is posted to in a document.
To accomplish this requirement, Company A will use the Business Transaction Event 1130, Post Document: SAP Internal Field Substitution.
1. IMG Menu Path: Financial Accounting Financial Accounting Global Settings Use Business Transaction Events Environment Infosystem (Processes).
2. Find the correct Business Event. You are updating a field, so you select the Processes Info System instead of the Publish and Subscribe Info System.
3. Execute the search with the defaults.
4. Find the correct interface for updating a document: Post Document: SAP- Internal Field Substitution
Find the Correct Interface for the Business Event
5. Put your cursor on the event and click on the Sample Function Module button.
6. You are now in transaction SE37 Function Builder. This is the function module (sample_process_00001130) you will need to copy into a "Z" name function module for your coding
Figure 8. This Is the Function Module You Need to Copy Your "Z" Name Function Module
7. Click on the Copy button.
8. Enter the "Z" function module name in the To Function Module field
9. Enter a Function Group. If you need to create a "Z" function group, go to transaction code SE37 and follow menu path: Go to Function Groups Create Group. A function group is a logical grouping of function modules, and the ABAP code is generated for function groups. You will be prompted for a development class and transport when creating the function group.
Enter Your "Z" Function Module Name Here
10. In Function Builder (transaction SE37), enter the new "Z" function module. Click on the Change button.
11. The system will default into the source code screen where you may enter your ABAP code.
12. Notice the tables available for the code. Additional tables may be declared if necessary.
13. Enter the following source code
tables: lfa1.
data: z_groupkey like lfa1-konzs.
z_groupkey = ' '.
loop at t_bseg.
check for vendor lines. If one is found, read the vendor master and
retrieve the group key field.
if t_bseg-koart eq 'K'.
select single konzs from lfa1 into z_groupkey
where lifnr = t_bseg-lifnr.
endif.
Move the group key field into all line items allocation field.
loop at t_bsegsub.
t_bsegsub-zuonr = z_groupkey.
modify t_bsegsub index sy-tabix.
endloop. "t_bsegsub
endloop. "t_bseg
The Screen Where You Enter Your Source Code
14. Save the function module.
15. Back out to the main Function Builder screen by clicking on the green arrow button.
16. Activate the function module by clicking on the Activate button
. Activate the Function Module from This Screen
17. Assign the function module to the event in the IMG: Financial Accounting Financial Accounting Global Settings Business Transaction Events Settings Process Function Modules of an SAP Appl.
18. Hit enter past the warning messages that this is SAP data.
19. Click on the New Entries button.
20. Enter the process for your interface. In your example it is 00001130.
21. Enter the country the interface is valid for. If it is valid for all countries, leave this field blank.
22. Enter the application the interface should be called for. If it should be called for all applications, leave this field blank. Please note that not all integrated transactions are programmed to go through these interfaces! You will need to test to find out!
23. Enter the new "Z" function module
Enter Your New "Z" Function Module Here
24. Save the settings. At this point you will be prompted for a CTS number for the configuration change.
25. The Business Transaction Event is complete! You are ready for testing.
Configuring User Exits (Older)
Basic Steps in Configuring an User Exit
Create a "Z" program for the User Exits and enter the necessary ABAP code.
Enter the new program name into table T80D.
Configure the application to call the User Exit.
List of User Exits
Variable Field Movements
Substitutions in FI, CO, PCA
Validations in FI, CO, PCA
Rollups in SPL
Fixed Field Movements in SPL
Cost Center Summarization on Detail Screen
Sets Formula Variables
Example Business Scenario for User Exits
Company A would like to add a "Z" field in the Special Purpose Ledger to capture a Business Unit field for reporting. They have used all the standard SAP fields such as Business Area and Profit Center. The field will only be used for reporting and is only needed in the Special Purpose Ledger. You created a special ledger table (ZZSPL1) with field Z_BUNIT and need to populate this field based on a combination of G/L account, fund and functional area.
To accomplish this requirement, Company A will use the Variable Field Movement User Exit. To make maintenance easier, table ZZBUSUNIT was created with the G/L account, fund and functional area fields as key fields, and the business unit field as a non-key field. You generated the table maintenance so the table could be updated using transaction SM30. SAP users update the business unit determination rules in table ZZBUSUNIT by entering the G/L account, fund and functional area, and then the business unit that combination should be posting to. The User Exit will read table ZZBUSUNIT using the G/L account, fund and functional area from the posting transaction and determine the business unit. The steps for using the user exit are detailed below. This example was created on a 4.6C system.
1. Copy the delivered template User Exit program RGIVU000_TEMPLATE into a "Z" program. Follow menu path Tools ABAP Workbench Development ABAP Editor (transaction code SE38). In early releases, the delivered program was RGIVU000.
2. You will be prompted for a development class and a transport. Please check with the technical team for the correct development class.
3. At the initial ABAP Editor screen, enter your new "Z" program name, select the Source Code button and click on Change
To Enter Your New Code, Select Source Code and Click on the Change Button
4. Enter the following code in the User Exit (Figure 14):
FORM E01_MVC USING FROM_FIELD TO_FIELD.
to_field = 'CORP'. "Set a default business unit.
read table zzbusunit to determine the business unit field.
select single z_bunit from zzbusunit into to_field
where hkont = accit_glx-hkont and
geber = accit_glx-geber and
fkber = accit_glx-fkber.
ENDFORM.
Figure 14. Enter Your New Code at This Screen.
5. Activate the program by clicking on the Activate button.
6. Change the configuration in the User Exit table to point to your new "Z" program.
7. Follow the IMG menu path: Financial Accounting Special Purpose Ledger Basic Settings User Exits Maintain Client Specific User Exits.
8. The entry to maintain is application area GIMV: Variable Field Movement. Enter your "Z" program
Enter Your "Z" Program in the Application Area GIMV: Variable Field Movement
9. Save the changes.
10. The final configuration step is to assign the User Exit in the variable field movement for your special ledger table. In the IMG: Financial Accounting  Special Purpose Ledger  Basic Settings  Master Data  Maintain Field Movements. Field movements control how the fields in a special ledger table are populated. They can be populated straight from other fields in a posting or through User Exits.
After You Assign the Business Unit Field and the G/L Account, the Exit Field Should Contain U01.
11. Assign the business unit field as a receiver and the G/L account as the sender. The Exit field should contain U01 (see Figure 16).
12. The User Exit number U01 calls User Exit E01_MVC form in the "Z" program.
13. Save the field movement.
14. You are ready to test your User Exit!
Reward points if useful. -
Value of the goods movement is negative:
Hi All,
We are posting GR for Import PO.
MIRO for custom has been already done.
But at the time of posting GR, system is throwing following error.
Value of the goods movement is negative:
Message no. M7301
Pls guide.
We are not working with subcontracting process. its a normal raw material purchase.
Regards
Edited by: sapsarang on Jan 21, 2011 5:44 AMCan you please share the solution ...
-
User-Exits stop working in automated purchase order creation
Dear all,
we used to create sales orders with transaction VA01 and then separately call ME21N to create a purchase order.
In saving the purchase order we activated user-exit EXIT_SAPMM06E_012 to process some extra logic we need here.
Now we changed to process for SAP to automatically create the purchase order (to eventually be able to automate the entire process, including sales order creation). Ever since we did that, the user exit is not called any more!
Does anyone know why? If I manually open ME22N and save the PO, it works! We have to find a way to run the logic in the user-exit during automated PO creation just for the volume of orders.
Besides that, we're still looking for a convenient way to update PO confirmations using a BAPI or other function module.
Thanks for your help!
regards,
Johannes.Good question
User-exit may not work as the function modules [ and not ME21N ] called in the Sales Order --> Purchase Req --> Purchase Order process may not call the enjoy user-exits.
Further, this process of automated PO works on Business Obejct event trigger.
So a event is triggered [ ALECREATED ] on Sales Order Business at the time of Sales Order Creation.
This event is linked with a function module called PUR_ORDER_CREATE_VIA_SD_EVENT.
similarly for change it is PUR_ORDER_CHANGE_VIA_SD_EVENT.
If you go through the FM code, you can make out how to utilize this FM as user-exit.
However you need to make the change in this FM after copying the related function group to a Z one. And then change the event linkage accordinlgy to call the new FM.
See Business Workflow --> Events section..
If you are not sure about how to do the event linkage then ask it in BPM section...[ They will request you to get lost ...no no ..they didn't do it to me ..just kidding ]
Cheers,
Ram -
Dear Experts,
When trying to process some goods movement error , the following message with message number apperead.
Value of the goods movement is negative:
Message no. M7301
How to process this error.
Regards,
RammohanHi
Check the material price in material master, and increase the price using MR21 t code and try the goods movement. I am sure if you follow this process you will overcome this error, becuase i have faced same error and solved.
Once you done with this please inform this to your CO consultant.
Thanks
S.Murali -
Error: dependent goods movement was incorrect
Hi,
Can anyone help me please correct this error "dependent goods movement was incorrect" (message no. RU 523). I have encountered this error upon confirmation.
Thanks.
Regards,
ChingThis error is noticed when production storage location between parent and child in direct production(special procurement
key - 52) is_ NOT_ similar i.e. mismatch of storage location
Example:
Production Order A {Collective parent structure production storage location: 0001}
|
|
|
Production Order B {Collective child production storage location: 0002}
In above scenario, prod. sloc is 0002 for child while 0001 for parent, which inturn results in COGI error with error message TYPE RU 523
Steps performed for correction:
1. Cancel the production order confirmation for component
2. In co02, edit the goods reciept sloc for component under goods reciept tab such that it matches with parent production order storage location
3. Redo the confirmations for the component production order and reprocess the COGI
Maybe you are looking for
-
My FaceTime shows one user ID, my iTunes shows a different one. How can I get everything on one?
-
TREX preprocessing failed, HTTP Status Code 401
Hello everybody! I'm using SAP NetWeaver 7.0 (2004s), TREX 7.0 on Win2003 Server. I'm trying to index files, but it doesn't work for files bigger than 10KB. I know that for these documents > 10KB only the URI is transmitted to TREX. So it seems the p
-
Hello all. I'm going to get a new computer in a few weeks, and be selling my current one. My problem is, How do i transfer the entire iPod* backup, that rests on my current computer, put it on the new computer, Reset the iPod, restore using the new c
-
Spanish characters on Iplanet 6.0 SP5
Hi, a couple of days ago I installed Iplanet 6.0 SP5 on a solaris platform but spanish characters like � � � � � � are not recognize it when I tried to get a web page with those characters. I already made a research on this forums for a solution, but
-
Where are my apps on the iCloud? When I log into my iCloud account on my PC I only get contacts/calendar etc but no other apps or their data. How do I find them?