Goods Movements done by WorkCenter

Hi gurus,
we have next scenario:
We have Goods Movement (mov. 531 and 261) in confirmations CO11N for an order and work center. How can we see the goods movement done in a particular workcenter?
In MSEG there aren't fields for work center. The unique point is in AFRU, the confirmation is linked to goods movement. Exists any report for see this data?
In COOIS we can't filter goods movement by workcenter, because the field Work Center only filter orders with this work center in order (with or without goods movement done against this work center).
Thank you!!!

Hi,
COOIS, CO26 will not meet your exact requirement, you can customized program on this
you can use tables below
RESB, S022, AUFK
Fields AUFNR, VORNR, MATNR
Regards,
Sankaran
Edited by: Sankaran M on Sep 9, 2011 5:16 PM

Similar Messages

Batch Determination when Goods Movement done from DBM side

Hi SAP Experts,
Greetings to all of you!! I wanted to ask you a question:
We have configured DBM and Automatic Bacth Determination is active in our system from MM side.
and when we click the "Goods Movement" button in the DBM screen (this should issue goods with mvt type 261) we get error message saying: Enter Batch".
There is no field on DBM screen where I can enter the batch number. And the system is also unable to determine the batch (i was expecting the batch will be assigned automatically becasue the Batch Determination was configured in the system).
Please tell me if there is any customization missing from DBM or MM side to perform the goods movement.
Moreover the "Goods Movement" is working fine for materials which are not batch managed.
Thanking you in advance.
Regards,
UK

Hi UK,
i am sorry i don't think DBM is currently supporting batches.
BR
Robert

Confirmation of Production Order without all Goods Movements

Hello experts!
I've tried to do a confirmation of one material that had only one level BOM with one material, but, when I try to do the Goods Movement in CO15, only the component appears. To another materials the goods movements was done for the two materials.
I've changed routing, BOM, material record... but I didn't have success.
Any ideas?
Regards,
Rodrigo.

Dear
You might have kept Backflashing Indicator -1 in MRP2 view and while doing CO15-In goods movement tab -You will find BOM compoenets with movement type -261 .But your requirement is to carry out the Auto GR-101 while confirmation posting .
Please do the following :
1.Goto -OPJK-Define Production Scheduling Profile -Here for that scheuling profile which have been assinged in Work Scheduling view -Mark the Auto GR active .
2.In the routing or in the Production Order -Operation Overview screen -Goto Operation Details -Slect the last operation -Assing the Operation Control Key which has Auto GR active like SAP Stanrda PP03 .Please check in OPJ8-Slect the Operation Control key -Hit the details information -Check the Auto GR Marked .Based on this while you will do CO15 , GR-101 (MIGO-101) will happen .
Hope it helps
Regards
JH

Goods receipt inbound delivery using old goods movement transactions

Hi! I have a client who is still using the old goods movement transactions in the new ECC system. I would like to confirm whether it is possible at all to receipt inbound delivery (from shipping notification) using any of the old goods movement transactions? I don't seem to be able to find one that work.
Cheers!
SF

Yes, does anyone have any idea re this?
Cheers!
SF

Value of the goods movement is negative:

Hi All,
We are posting GR for Import PO.
MIRO for custom has been already done.
But at the time of posting GR, system is throwing following error.
Value of the goods movement is negative:
Message no. M7301
Pls guide.
We are not working with subcontracting process. its a normal raw material purchase.
Regards
Edited by: sapsarang on Jan 21, 2011 5:44 AM

Can you please share the solution ...

Field disable or non editable -- goods movements

Hi team
your assistace will be highly appreciated.
I´m working with tx CO11N and after completion of the requiere data we click on goods movements button and the next screen is : "Enter production order confirmation: goods movements" and this shows some fields and what I need is to disable some of them or make them non editable : quantity, storage location and movement type.
Is it posible through Spro? if yes could you please tell the where.
I don´t want to create a variant.
thanks

I guess Variant is the only option here, atleast thats what my PP consultant had done in my last project.
There didnt seem to be any other alternative then.

Unable to do goods movement when calling BAPI_PRODORDCONF_CREATE_TT

Hi,
I have used BAPI_PRODORDCONF_CREATE_TT as RFC.
When I run the bapi with that of input payload seperately production order confirmation and goodsmovement are done successfully.
But when I run the interface then only production order confirmation is successfull while goodsmovement is unsuccessfull.
Any help on this please?
Thanks in advance,
Rohan.

Hello Rohan,
I you are using BPM to call two RFC's seperately for prd.conf and goods movement, then, try to incorporate a Wait step in the BPM!
Regards,
Jilan

Create a subsequent Goods Movement for a transfer posting

Hi Team,
I have a scenario where the users will create a Good Movement document for transfer posting. The Stock of Material "A" is transferred to stock of Material "B" using the movement types 561 etc. Now the quantity is reduced from unrestricted stock of "A" and posted to "Stock in Transfer/Transit" of "B". The requirement is to create another Goods Movement document immediately after the above transfer posting is completed and use movement type 101 to post the same quantity to unrestricted of "B".
I tried searching for use exits and could not find a relevant one "After Save" for goods movement online transaction. I found the MB_GOODS_MOVEMENT_UPDATE Badi but don't know how to create another goods movement document while in the update task. I'm concerned that if I call a BAPI or BDC inside the update task, it might conflict with the current transaction (transfer posting). Looking for your guidance.

Hi Deepali,
You can use the userexit ' ZXMCBU02 ' to write your own code. This user exit gets triggered for almost all the goods movement transaction.
There is also a very similar BADI which you can use which gets triggered for every goods movement transaction.
I would like to know the BADI feel free to let me know. I think the above user exit should server your purpose.
Hope this is useful for you.
Cheers
VJ

Error message (M3024) during parallel goods movement

For publication distribution, collected unreferenced deliveries and goods issues are done in SAP system for a customer group by a program which is triggered by a web service every day. Standart SAP functionalities are used in this program. At goods issue part of program, an error message is occuring "Valuation data for material & is locked by the user &" with error code :M3024. The user who processes the program is locking himself. Also we have checked the other goods movement types in standart transactions (MB1B-MB11..)and same problem was occured. We have checked the notes that we applied before for to avoid material lock in paralel goods movement. There is nothing changed both in customizing and deveploment after upgrade. So we couldnt find the way to fix this problem. FIRST ANSWER FROM SAP***************************************** Can you kindly review the attached note 70865 with regards to this issue. WE APPLIED.-- We reviewed 70865 and this solution not applicable for our current system. According to note; We set material late lock exclusive time 15 seconds in OMJI. This solution solved material lock error at all plant level. After this solution, We get same batch error during goods movement(m3862), Then We applied note 157423, this note solved material batch lock error during goods movement, At last we have now m3024(Material valuation error lock) error during all goods movement. THEN********************************* As explained in the note 70865 , to ensure data integrity, it is necessary to block the material against updates by other users during good movements. This is achieved by blocking the material plant (lock object MARC) and the material valuation area (lock object MBEW) exclusively against othertransactions which update the material master. What you can do, as advised in the note, is to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously. The problem is that you will experience a disadvantage of performance loss after this change. Please, notice that with this change in OMJI, several users will be ableto carry out GOODS MOVEMENTS to the same material and plant simultaneously. This change will not allow the simultaneous input of a goods movement and an invoice for the same material (in this case, the material will be locked as soon as the purchase order item is adopted in the invoice and the error message M3024 will occur). When the error message M3024 occurs, you could check with transaction SM12, there you could find some tables like MBEW are locked by user. The table is locked to prevent valuation, quantity etc. to be updated. System does not check if it is standard price or MAP, as soon as you work with one material it will be locked (its valuation data has to be locked, because otherwise there is no guarantee of the consistency of the stock values. Without this lock mechanism the possibility of serious data inconsistencies could arise). your customizing under: SPRO > IMG > Material Management > Set up Material block for goods movements Here you could choose setting 2(at positing) to have only a short locking period at posting. Please review information in attached notes. 521945 FAQ: Material block 322989 Late block: Number of blocking attempts AT LAST ** PROBLEM STILL GOING ON WHAT SHOULD WE DO TO SOLVE THIS ERROR.

HI Fatih,
Refer to SAP Note 1744780 - Error message M3024 during Invoice Verification process .
In the standard system it is not possible the simultaneous entry of a GOODS MOVEMENTS and an INVOICE for the same material and the same plant.
When you enter the invoice for the purchase order item, the valuation data for the material is updated, therefore this valuation data (table MBEW) needs to be blocked so that it is not changed at the same time by any other transaction (which might cause inconsistencies).
Resolution
This system behavior can not be avoided by any customizing setting or any user exit.
This is correct system behavior to protect the other transactions update the material master.
As advised in the note 70865 :
It is possible to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously, however there is a risk to cause the data inconsistency and performance problems.

Goods movement (movement type 601), Assign GL account

When you craete an outbound delivery (picking, packing & goods issue), it creates an Financial document (the goods issue), the goods issue have a plant and sales office & profit centre. When the financial document is created, it post to a specific GL Account, I want to change the GL Account, but don't know which field (plant, sales office, profit centre) determines the GL account, and where this setting is made, so that I can change it.
The movement type that involve is 601. This means for every goods issue we generate, there is a accounting document, and this account document is posting to a GL account, and I want to change this specific GL account. It is not in VKOA, OKGB or GGB1.
Thank you for your assistance

601 is created for goods issues against sales order. Look up the material document in MIGO and look for the FI document entries taking place. Then go in OBYC, and look up those account keys and you will find the G/Ls assigned against those accounts keys.
Whenever you create a delivery with reference to a sales order, goods movement takes place in the bacgground. eg. In case of standard sales order, you create an outbound goods delivery to the customer.
Here movement 601 takes place. This movement is configured in MM.
When goods issues are posted for sales:-
Movement type used for posting u2013 601
Accounting entry posted:-
Cost of goods sold -
Debit
Inventory of Finished goods -
Credit
For cost of goods sold transaction key----
GBB
is updated with general modification key----
VAX
Edited by: Afshad Irani on Apr 29, 2010 5:09 PM

Urgent ! Help in linking Work center to goods movement

hello,
i need help in finding the work center for the goods movement in AUFM. The goods movement AUFM table shows all the goods movement entries but i want to tag it to the corresponding work center. i found out a way to tag it. by linking AFKO - RESB - AFVC - CHRD. But the problem is that if the material on the production order is the material that is finally produced, i cant find a work center for it. Because this material has no entry in the RESB table.
Any suggestion would be highly appreciated.
hey everyone
is there a way to have the VORNR field connected to the AUFM goods movement. this will solve the problem of linking the work center . So if someone knows how to link the AUFM entries with the respective VORNR activity ? Please give suggestions.
thanks
Laura.
Message was edited by: Laura. 3:20 PM
laura s

Laura,
Goods issues are linked as you described because components consumed by a production order have reservations (RESB) and are assigned to an operation (AFVC). Goods receipts, on the other hand, do not have reservations and therefore don't have this link to the work center.
If you are using automatic goods receipt, then one of the operations in the production order will have a control key set up for automated goods receipt (PP03 is the standard, and it's usually the last operation). The business would likely see this work center as being logically tied to the goods receipt of the produced material.

Goods movement from Maintenance order

Hi Experts
I have the following scenario,
I have a component ( with Material master) in the maintenance order and i use Item category N to trigger a Purchase requisition. The Pur Req is converted to Purchase Order and then the GR is done directly to the order .
Now i have not used this Component and want to make a goods movement to place it in stock. So the requirement is to move the material from Maintenance Order to the Storage location .
How and which movement type can i use to do this ?
Please help
KK

Hi,
Click the below link for more information
http://sap-img.com/plant/in-pm-how-to-return-material-backflushed.htm
regards,
Venkatesan Anandan

GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB

Hi,
does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
thanks in advance
Steffen

Hi,
the thing is the following (maybe it doesn't work at all, i don't know) :
a) i have a "Non-stock" material (e.g.material type NLAG)
b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
"You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned to it."
So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
Maybe shomeone knows what to do or has a better idea.
Best regards
Steffen

EDI message output for goods movements

Dear experts,
we configured NACE to send EDI messages, when goods movements are created. When we use partner type "VN" (Vendor) and leave the partner number empty, no message is created. Only if the partner number is filled, a message is created. This means, that the partner number is not extracted dynamically from the goods movement and we have to make one NACE entry for each partner. For other applications (e. g. outbound call offs), the partner number in NACE can be left empty and when a document is posted, the receiver partner number is determined dynamically.
Is it possible to modify the processing, so that the partner number is extracted from the goods movement? How can this be done?
Best regards,
David Claes

Hi,
What is the application you selecting for creating ouput?
I don't see output record condition with as combination.
You should be using ME as application area.
Thank you!
Dipak

COGI error in relevance in production order goods movement

Hello,
Yesterday I have a COGI error with regards in reservation. "RE Quantity moved exceeded by 7,912 LB: 1000710 0111 0001 201200". But today someone done something on the production order, and the error yesterday in COGI are fixed. Am confused what happen or what they did to fixed this since yesterday the error still there but now it is gone.
when checking the Documented Goods Movement for material 1000710 in the production order here the details,
Goods MVt   Mat. Doc Mvt type Batch      Qty   Reservation
1                       4908430     261     201199    6000 1112345
1                       4908426     261     201198   14000 1112345
1                       4908437     262     201200   14000 1112345
2                       4908430     261     201200   14000
This is what it shows? could some one explain me with this data what was the reseason yesterday i did not fixed the COGI error while now it was fixed? and why in RESERVATION 1112345 it only shows qty 6000 not 14000 for this order?
Hope for your kind and urgent reply to this issue
Thanks
JJ
Edited by: John Jay Palisoc on Jul 24, 2008 5:02 AM

Hi JJ,
well, as far as I can see, there is an unplanned 261 (without reservation no.). This one (doc. 4908430) has wihtdrawn additional 14000 for batch 201200. Therefore, the later 262 posting (doc. 4908437) with 14000 for that batch could be put into store without error.
That's all
Regarding the reservation: It shows qty 6000 because as first step 14000 were withdrawn, then additional 6000 and then 14000 were put back. So 6000 remain.
Regards, Andreas
Edited by: Andreas Seibel on Jul 24, 2008 3:37 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:40 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:45 PM

Goods Movements done by WorkCenter

Similar Messages

Maybe you are looking for