Goods movements overview in co11n

Dear friends,
In production order cofirmation (CO11n) if we click on goods movements button it will take you to new screen with goods movements overview table control. My requirement is that I want to make some quantity fields in table control as display only.
For that I tried
CONFPP01
CONFPP02
CONFPP03
CONFPP04
CONFPP05
CONFPP06
CONFPP07
And BADI WORKORDER_GOODSMVT
But of no use. Can anybody suggest me a BADI, or any other possible solution?
Thanks in advance.
Regards,
Mubashir

Hi,
I understood that going into GoodsMovemnt overview is being compelled by the Difference between the Actual quantity issued and Planned quantity in BOM for a particular component.
After backfush, still by MB1A, we can post the goods movement against that order. (Movements 261,262)
I hope this alternative is considerable.
Otherwise Please remove the Goods issue storage location in the order or Material master. Then system prompts for this. There u can enter the quantity as u want.

Similar Messages

Enforce "Goods movement overview" in CO11N

Hi Everyone,
There is one material A with 3 components A1, A2 and A3.
A1 and A2 are issued using picking list. A2 is set as backflushed.
When we do confirmation, if we don't go to the goods movement overview, we cannot post goods issue the exact consumed quantity of A2.
Is it possible to enforce the system to go to the goods movement overvew before save? If can... how?
Best Regards,
Bin

Hi,
I understood that going into GoodsMovemnt overview is being compelled by the Difference between the Actual quantity issued and Planned quantity in BOM for a particular component.
After backfush, still by MB1A, we can post the goods movement against that order. (Movements 261,262)
I hope this alternative is considerable.
Otherwise Please remove the Goods issue storage location in the order or Material master. Then system prompts for this. There u can enter the quantity as u want.

Good Movement button when CO11N

Dear SAPper,
I wonder why the good movement overview screen in CO11N always shown my component
although it had been GI with MB1A?
we design the production with GI -> confirmation -> GR
so there is no backflush and no auto GR
I check our material master and workcenter, the backflush indicator is not set
I check customizing of confirmation paramater, quantity is not proposed
Where can i check so the good movement overview in CO11N should not show component
and when invoke CO11N we always get message
"Confirmation can only be save in good movement overview"
Please help.
Best regards,
Freddy Ha

Dear All,
Yes, i see, prod order that is generated before the change of opk4 is not effected again.
new prod order is effected
Thanks all.
Good day.
Best regards,
Freddy Ha

How to shift column in Goods movement overview

Dear gurus(sap pp consultant),
this is related to earlier thread which was answered by you,
i am able to drag the required column,but i did not find the table setting tab,
i am working on 4.7 version
please suggest....

Aakash,
In the goods movement overview screen, on the right top corner of the first goods movement record you would see a application button with Yellow and white color that's the Table Setting function button. First change the layout as required and then click this button, and then enter the variant name and activate the check box next to it on the left side and then click the save.
Regards,
Prasobh

Goods Movement Overview layout in Confirmation

Dear ,
How to set the layout for Goods Movement Overview in Confirmation T code .

Dear SAP PP,
when you are in Goods movement tab, Drag the coloums as required then
Extrem right you can find option Configuration button ( Small Button ) just click it
give the Variant name & save, so from next time same settings will appear
Regards
Madhu

The CO11N Goods Movement Overview does not display any materials for BOM

Hello folks;
I can't seem to get a hit when searching for my particular question, which most likely is an easy one for most of you.
A new BOM was set up consiting of individual materials (no sub-assemblies).
After a production order was created (CO01) and released and a reservation was created, the user went to the CO11N transaction to process the first Operation (Issue the components to the Order).
He clicks the "Goods Movement" button and the "Enter production order confirmation: goods movement" screen that displays is blank! There are no components listed with the "261" movement type.
All the other BOM's that we process do not have this problem and their components appear except for this new BOM that was created.
What are we missing?
I'm sure this is an easy question for you folks since I am mainly an ABAP'er with some Logistics config experience.
Thanks in advance.
Scott.

Thank you so much. The person who created the Routing did not click on any of the Backflush flags.
I will have them fix the Routing.
Thanks again.
Points awarded.

Issue of goods movement in co11n

hello,
anybody please guide me.
i am doing production order confirmation in co11n. i am using control key as pp03 in routing. during goods moment posting i am not getting storage location column in goods movement overview screen. how can i resolve this issue.
Thanks & Regards
Bhakta

Dear Baktha,
Extream right in in description row you can find option ( button ) Configuration button
it will have three cloours i.e blue, yellow & white click that and check if any variant is set
if set remove it it will resolve the issue
if notthing is set in configuration button then
Check if any transcation variant if set for CO11N
you can check for transcation variant in SHDO
if possible take Abaper help on SHD0
Regards
Madhu

Goods Movement in CO11N

Hi
As per client requirement, I want to populate the all materials relevent to the production order in goods movement scren in CO11N and do the GR and GI by mentioning the batch no and storage location.
Current setting though allow me to do 261 mov but the GR material not populated here, when I manually key in the 101 mov, system not allow me to do this.
Can any body help me to do the setting.

Hi,
Please follow the steps,
Activate back flush indicator for that Component at MRP view of Material master(Once you do this no need of doing GI Manully)
Set the control key which allows the u201CAuto Goods receiptu201D for the last operation of the production order. Once u confirm the last operation Auto GR will happen for finished goods, here no need to do GR manually.
Once you manityain this in CO11N it triggers automatically.
Please try and revert back.
Cheers,Kumar.S

Batch Classification Screen for Goods Movements

SAP Gurus,
Very recently (24. April), we experience the following issue: (PP-PI Process Order)
At the moment of process order confirmation, for any new batch assigned in the good movement overview, there's no pop-up of batch classification screen which allow our user to entry the classification data. And this functionality works fine in the past.
Do you have an idea that how it happens? We checked the configuration OMCV and master data as well, the settings are all fine to me.
Best regards,
Vincent

Dear Vincent,
I think you talk about the 101 movement, don't you? In this case this is not possible at all, check SAP note 85310
Because goods movements can be decoupled from confirmations and
processed in background, it was decided that this functionality would
not be implemented; therefore this is Standard R/3.
Solution
As a work around for this you have the following options:
1. Classify your batch manually through Batch Master Maintenance.
2. Turn off automatic goods receipt and classify your batch through the
    pop-up that is presented during MM goods receipt.
3. Do not create your batch during Order Processing. Instead have the
    system create it during confirmation and at this time you will be
    able to classify your new batch from the Goods Movement screen
    COMPONENT>BATCH MANAGEMENT>CREATE BATCH.
Note :
If you want that your batch is classified in the background you can set
in the transaction OMCV (classify batches within goods movement
overview) that the classification is to happen in the background. You
can then utilise the user exit EXIT_SAPMM07M_004 to valuate the
characteristics if it is valid for
your release.
Regards,
Sabine

Goods movement in Confirmation IW42,

Hai all PM gurus,
I have activated the back flush indicator in the Material master record.I have maintained the components in the task list also.In the maintenace plan for that the particular task list, the componetns also copied - flagged the check box back flush indicator manually in the components screen. While doing confirmation by IW42, the goods movements are not posted?. In the components over view screen also, the material is not copied?. What might be the problem?. Any configuration required.

hi
how you came to know the goods movement has not posted.while confirming definitely it will show message as confirmed and goods movement posted.
kindly read the sap definition for ALL components
All components on goods movements overview
Specifies that in the goods movements overview, all components are to be displayed that are assigned to the operation in question. The system posts the withdrawal of all components displayed in the overview as a backflush.
Use
You use this indicator to decide which components are displayed in the overview for individual time confirmation:
If you set the indicator, the system displays all the components regardless of whether or not the backflushing indicator is set for the component in the order.
If you do not set the indicator, the system only displays the components for which the backflushing indicator is set.
In addition, the material produced appears in the goods movements overview if it is to be placed into stock using an automatic goods receipt. You specify whether or not an automatic goods receipt is to take place in Customizing for the operation control key or in the production scheduling profile.
Dependencies
The indicator has no influence on the overall completion confirmation.
regards
thyagarajan

Expected Goods Movement in GATP

Hi Experts
Has anybody used the Expected Goods Movement (EGM) functionality in Global ATP ? I'm trying to find out if it requires EWM as a pre-requisite.
The SAP Help link seems to show this under GATP, but gives examples from EWM, so I'm not sure.
Business requirement is that in certain cases, show some inventory as 'available' a few days before it posts as goods receipt. EGM seems to meet the requirement, but we don't have EWM in scope.
Thanks
Rishi Menon

Hi,
1.Please keep the tick mark for the All components for Goods movements in OPK4,Confirmation parameters
As per the SAP Help
2.If you set the indicator, the system displays all the components regardless of whether or not the backflushing indicator is set for the component in the order.
3.If you do not set the indicator, the system only displays the components for which the backflushing indicator is set.
In addition, the material produced appears in the goods movements overview if it is to be placed into stock using an automatic goods receipt. You specify whether or not an automatic goods receipt is to take place in Customizing for the operation control key or in the production scheduling profile.
I think it can be helpful
Thanks
Balaram

MB26 : ERORR : goods movement are incorrect

Hai SAP experts,
After the MRP run , the planned orders created gets converted to production orders .So as per BOM , the components require to produce the ordered material gets reserved against that production order & Is shown as orders in stock requirement list for component materials . When i go to MB56 t code , and given details and execute that one It showing different components and system assign automatically storage location and batch number.At the time of save its showing error
" goods movement are incorrect "
Thanks

Hai,
I am MM consultant .Before that i am not working on reservation for production order . I dont know what the use of MB26,
As per discussion with my collegues , they told that in MB26 ,system shows the goods movement overview .When you click save button i.e , Post button ,then goods are posted but here its showing error
GOODS MOVEMENTS ARE INCORRECT .
This error comes only at the time of 261 mvt type GI to Production order .
IN the case of 311 this error is not getting .Give me suggestions
Thanks
Edited by: babbullu on Oct 20, 2011 3:10 AM
Edited by: babbullu on Oct 20, 2011 3:10 AM

Co11 question - Goods Movement button

what is the implication if i add more components, aside from those already allotted to the production order when i confirm this operation?

>
Siva Kumar M wrote:
> Hi,
>
> If you assign the components at the time of 1st Operation confirmation then at that time only the Goods will be issued.
>
> For the 2nd Operation confirmation, if not assigned in the Operation or at goods movements button in CO11N they will not be issued again.
>
> If not specified, system will assign all the components to the first operation.
>
> Regards,
> Siva
so do you mean to say, that for the second operation to get the additional issuance plus the original allocation, i must have issued them during confirmation of my first operation?

Auto GR but no finish good in component overview in CO11N

Dear SAPper,
I use auto gr with control key PP03 standard SAP.
But when i do confirmation of the operation with PP03 control key, no finish good in
component overview in CO11N.
i ever asked about raw mat component always shown in component overview when CO11N although
i don;t user backflush. I got solution that in OPK4 i should untick "All Component" in good movement box.
is this the root cause my finish good doesn't shown either in component overview although i used auto gr.
The condition i need is :
1. i don't use backflush so no component shown in component overview in CO11N and it should save in screen of confirmation and not save in component overview screen
2. because auto GR is used so finish good should shown in component overview.
Please kindly help.
Thank.
Best regards,
Freddy Ha

Hi Freddy,
It will not show the GR Quantity in th Component details of the CO11n.
The confirmed quantity will be the GR Quantity.
After posting the Confirmation, check the 101 movement for the Assembly with MB51..
Regards,
Siva

At co11n in goods movement screen material not showing

hi all,
when i m doing co11n n going to goods movement screen it not showing material and its quantity though after the confirmation material deducted from its stock, plz help me in this matter

Hi dear,
In Production order in operation overview check if control key is correctly maintained or not.
Also in Production order component over view if the back flush is unticked then that material will not be seen in CO11N goods movement.

Goods movements overview in co11n

Similar Messages

Maybe you are looking for