Goods receipt against outbound delivery

Hello,
Can we create a goods receipt against an outbound delivery document?
The transaction MIGO provides an option but for some reason I am not able to create.
The scenario is the following :
Lets say there are two DCs DC1 and DC2 : both belong to different company codes.
- Outbound delivery created by DC1,then post goods issue
- Goods receipt to be done against the above outbound delivery.
Is it possible?
(I do not want to create a PO for this.)
Regards,
Lisa

Hi Prabhu,
I have been trying to post goods receipt against outbound delivery but here is the error I have been getting :
"Goods receipt not possible for delivery 80000059: error code 4".
Is there any specific reason for this?
Here is the process I have follwed :
-Created outbound deliveries via allocation
-Picking
-Post Goods Issue
- Migo - Goods Receipt.
Regards,
Lisa

Similar Messages

Rounding while goods receipt against outbound delivery

Hi Experts,
I have an issue regarding alternative unit of measure.
Material with base unit of measure FT,ordered unit is Meters since the alternate unit of measure has conversion factor getting decimal places while goods receipt against outbound delevry.
Is it possible to round off to nearest figure without decimals.At what level means PO,delivery,GR how we can round off.please advice with customization.
Thank you very much for your help.
Regards,
Babu
9930154536

it is not possible to rounding of stock while GR through customizaton settings.
abap development is required to round off the stock.

MIGO - Goods Receipt against Outbound Delivery - Default Storage location

Hi All,
We have a Plant A001 and 2 Storage locations B001 and C001.
Recently we added a new Storage location D001.
Moving forward we would like to have all goods receipts to be posted to the new Storage location D001.
What are the steps involved so that the GR postings will be done with the new Storage location ?
Please advise.
Meghna

please try this
Out Bound delivery: storage location determination
Implementation Guide for R/3 Customizing (IMG)
Logistics Execution
Shipping
Picking
Determine Picking Location
Assign Picking Locations
Inbound deliver storage location determination
Implementation Guide for R/3 Customizing (IMG)
Logistics Execution
Shipping
Basic Shipping Functions
Shipping Point and Goods Receiving Point Determination
Assign Goods Receiving Points for Inbound Deliveries

Goods Issue against outbound delivery from blocked stock

Dear All
I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
Please let me know any solution for this.
Thanks and Regards
Satish Kumar

Hi
Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
http://scn.sap.com/thread/1541911
Thank$

Automated statistical goods receipt against inbound delivery

Hi,
We have set up a process that we get a DELVRY03/DESADV Idoc from our vendor to confirm the delivery to our customer. This DESADV Idc will create an inbound delivery and a statistical goods receipt will be posted.
Now we have a new requirement, the vendor material has a serial number assigned. We get the serial number in segment E1EDL11 and it will be copied into the inbound delivery, unfortunately the statistical goods receipt will use transaction MB01 and it will post the statistical goods receipt against the purchase order details which did not contain the any serial number information.
Is there any way to set up the automated goods receipt against the inbound delivery and not against the PO?
Thank you,
Frank

Hi,
Anybody out there who knows how to enable an automated goods receipt against an inbound delivery?
Thank you,
Frank

Fields mapping IDOC WMMBXY to post Goods Receipt against Inbound Delivery

Hi Friends
I am testing Goods Reciept against Inbound Delivery using Inbound IDOC.
IDOC Type used WMMBXY and Function Module :
System is giving erorr message as "Document does not contain any items".
Kindly let me know segment data mapping for above IDOC type
Following data are passed to segments,
E1MBXYH-BLDAT Document date
E1MBXYH-BUDAT Posting date
E1MBXYH- XBLNR .. in this field i am passing Inbound Delivery number
E1MBXYH- TCODE ... MIGO
E1MBXYI-BEAKZ   ... B Goods Receipt against Purchase Order
E1MBXYI-MATNR     material number
E1MBXYI-WERKS     Plant
E1MBXYI-BWART    Movement Type
E1MBXYI-LIFNR         Vendor code
E1MBXYI-KZBEW      B
E1MBXYI-POSNR      Item number in delivery
E1MBXYI-VBELN       Inbound Delivery number
    E1MBXYJ-VLIEF_AVIS            Inbound Delivery number
    E1MBXYJ-VBELP_AVIS           Item number in Inbound Delivery
    E1MBXYJ-WM_KZBEW            Movement indicator
Raj

Hello,
Did you recieve any answer or find a solution? I encounter a similar issue.
Thanks in advance,
Génia.

Posting goods receipt against Inbound Delivery

Hi,
Our process is creating Purchase order with Confirmation control for Inbound delivery. Then we create a Inbound delivery.
1) After inbound delivery is done we do PGR through VL32N, the system updates the PO history with GR along with the Inbound delivery no. as a reference document against the GR & also the Inbound delivery document flow is updated.
2) But our problem is if we try to do Goods receipt through T-code MIGO against Puchase order or inbound delivery we are not getting reference no. updated in the PO history & also there is no update in the document flow. Also the inbound delivery remais open.
Can you explain why this is happening?
Regards,
Sagar

Hi Sagar,
It is very much possible to do GR using MIGO and document flow will also be updated, you have to do certain config settings for this which is as follows:
in SPRO go to Logistics execution - Shipping - Basic shipping functions - Configure global shipping data - tick document flow update.
Now when you check in Table VBFA you will get the Material Document No. in field VBELN and the status shall aso be updated and inbound delivery will be closed after complete GR.
Hope it solves your problem

Goods receipt against inbound delivery

After an import po has been created then an inbound delivery is created also.So after the inbound delivery we do goods receipt and our goods receipt is done against po even when their is inbound delivery.The reason why the goods receipt is done with reference to the po is that we have different vendors for all the delivery costs for example we have a vendor for custom charges, a vendor for freight charges, a vendor for terminal charges.so the goods receipt is done against the po so that when doing the miro they can select the different vendors.But inbound delivery is done with a single vendor and if the goods receipt is done against the inbound delivery it might acquire all the costs to that vendor.Is there any method whereby we can be able to do our goods receiot with reference to inbound delivery that will also capture all the delivery costs

The process you should follows is this:
1) PO - define all the custom and freight condition types and enter the corresponding vendor in the condition types. Also, in the confirmations tab, choose Inbound delivery
2) When the vendor ships the material, create an inbound delivery from VL31N to track it (against the actual import vendor)
3) When the goods reaches customs, do a MIRO against the PO choosing 2-Planned delivery costs. This will credit the Customs vendor.
4) When the goods arrive at your plant, do a MIGO against the Inbound delivery from step 2. Enter the MIRO number of step 2 in the popup that appears.
5) Now do the MIRO for the actual import vendor and the freight vendors if applicable.
Try this in your sandbox system. Doing a GR against IBD will not cause any difference in the accounting entries.

Goods Receipt wrt Outbound delivery and Restrict GR wrt PO!

Hi,
In a scenario of intercompany, i need a functionality!
GR should be done only wrt Outbound Delivery but not wrt Purchase order for intercompany document type.
Pl. help!

I have checked that OSS Note and it looks relevant to my problem.
Now the issue is that note cannot be implemented for 4.7 version. So again the issue remains untouched.
I thankyou for your valuable input but can you suggest me some other way out of it.

Return Receipt against outbound delivery

Hi all,
There is a problem while doing the Goods return against sales order.
While doing the PGR against a sales order, the material returned is not getting updated in unrestricted stock but it is hitting the "returns" stock. why is it so? Does it have connection with the predefined "reasons for movement"? Can the stock be taken directly to unrestricted stock?If so, How? If not, how to transfer goods from "returns" stock to "unrestricted"?
Need your quick reply, its urgent.
Thanks in advance,

Hi
The standard returns movement for return orders (based upon schedule line category, item category assignment etc) will force the stock into 'Returns'. The standard process will then require the stock to be transferred to unrestricted after a review.
If you want a return order to post directly to unrestricted then you will need to amend the movements assigned to the schedule line category for returns order.
I would actually recommend a complete new order type and related item categories
Regards
Steve

Goods Receipt using Inbound Delivery with reference to Outbound Delivery

Here is our scenario that we need help finding a solution:
1. Multiple Intracompany POs created
2. On the confirmations tab of the POs, we have u201CInbound Deliveryu201D Selected because the items need to be received in with Handling Unit management.
3. We have the Order Combination box checked on the shipping tab to allow 1 delivery to be created for multiple purchase orders.
4. We create only 1 Outbound Delivery for only available items on various purchase orders.
5. Due to being handling unit managed, we need to receive the items using an inbound delivery.
Problem: We need to find a solution to easily enter an outbound delivery number which will allow us to receive only the parts that were shipped (issued), via the inbound delivery process.
If we remove the confirmation control key, we can complete a Goods Receipt for Outbound Delivery in MIGO u2013 but is there a way to complete a goods receipt using an inbound delivery with reference to an Outbound Delivery?
Thank you for the help.

Hi,
You can work with Inbound delivery created via IDOC Triggered from Outbound Delivery, this will carry the HU Data as well. Please refer this wonderful note, which will explain you a lot of things, Note 1119073 - FAQ: Automatic inbound delivery creation for stock transfers
There are other notes also available for Inbound delivery creation with HU in STO, please browse the notes, if you find any difficulty.
Regards
Chandra Shekhar

Post Goods Receipt for Inbound Delivery using WHSCON IDoc

Dear All
Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
We create a delivery (type NL = replenishment delivery) for this POs
As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
We dispatched 50 units of a product => QTY:50:12
The partner received indeed 50 units => QVR:50:66
Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
the goods receipts for the products in the original stock transport order and
upate the message flow in the delivery
My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
To make a long story short here are my questions:
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
Does anybody have an example on how to fill the WHSCON IDoc?
Or is my approach a cul-de-sac ?
Kind Regards
Uwe
PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Partial Goods Receipt for Inbound Delivery

Hello Frends,
We have a requirement to generate partial goods receipt against Inbound delivery created in Intercompany scenarios, however when we analzed there two alternative ways possible -
1. Goods Receipt in Inbound Delivery - Transaction VL32N : In this transaction,ssytem allows goods receipt for complete quantity but not for partial quantity
2. Goods Receipt reference to Inbound Delivery - Transaction MIGO : In thsi transaction, there is a provision to generate partial goods receipt however system not updating the status in inbound delivery document.
In this regard, requesting your support on what is possibility to fulfill our requirement, is there any standard SAP approach for this.
Appreciate your support. Thanks
Best Regards,
Goutham

Hi,
Thanks for your quick reply..
I have a outbound delivery with 100 EA, now system automaticallly generates a Inbound delivery for 100EA using output message. Now we need to generate partial goods receipt for the inbound delivery, mean first 20, then 40 and the remaing.
What are the best practices available since when I check from the Inbound delivery,we cannot make partial goods receipt.
Best Regards,
Goutham

MIGO FOR GR against OUTBOUND DELIVERY

Hi All
In MIGO transaction I want to do some modification in that when I am going to save purchase order ie for Goods receipt for outbound delivery and movment type 101, I want to call another transaction created by myself.
But for above when I am debugging the program in that I can see that all methods only can u please tell me where to put call trancation which should be called at save button only
Regards
Sagar

Use LINE_MODIFY from the MB_MIGO_BADI Business Add-ins SE18. create an implementation and use the LINE_MODIFY method to restrict the plants. As for disabling why dont you try the loop at screen command and check what screens will be turned off from the other BADI methods. you can mostly find these screens in the PAI and PBO detail methods.

Batch needs to be created 1st then post goods receipt with inbound delivery

Hi,
We are having split valuated materials with batch managed, we need to post goods receipt with inbound delivery.
When we create inbound delivery with PO batch is blank which is correct.
Now when we try to post GR with IBD in VL32N we need to put batch, but we are getting error message as batch is not available in receiving plant.
In this case we have to create batch 1st with MSC1N and then we can put batch number in Vl32N and can post GR.
If material is not split valuated we can put batch manualy(Without creation in MSC1N) in VL32N and it is allowing to post GR with batch.
Can you please let me know this behaviour, is there any SAP note available about this behaviour.
Thanks
Sudhir

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Goods receipt against outbound delivery

Similar Messages

Maybe you are looking for