Goods Receipt failed While Processing through IDOC

Hi,
We rae processing the GR through IDOC from PCS System.
Goods Receipt for some Material failed in IDOC.Because of following error
Error : Enter the shelf life expiration date
We have checked the SLD for Material in MSC3N and it is maintained for that material.
can yoy tell me the reason behind that ?

Hello
Please check the IDOC in WE19, weather the SLED filed is populating the date or not and also in exact format .
Thanks and Regards
Pavan

Similar Messages

  • SAP R/3 goods receipt and issue process through RF

    Dear All,
    We need the below information.
    In order to setup RF enabled goods receipt and goods issue what basic infracture we need to have.
    we are not intersted in using WM module, with out WM we can go for this ??
    Is this the right forum to post this question...
    Abdul Raheem

    Hi.
    I've just carried out this architecture. You have to check 2 things:
    1- Are your DB software levels the same? (AIX + Windows)
    2- Have you checked connectivity from client to DB server?
    Regards,
    Fatih Erten

  • Final Delivery indicator in Goods Receipt tab in Process Order

    Hello Friends,
    I have one doubt, thought to discuss with you.Whats the importance of Final delivery indicator in Process order.I know that if any further goods receipt is not accepted against the order than we should tick this indicator,because of which system sets the DLV status at order header level or if goods receipt qty against the order is equal to order qty than system automatically sets this indicator.
    when we do the settlement of order than system looks either for TECO or DLV status of order , if its find  there than system consider such orders for settlement.
    Now my question is suppose i have done the Goods Receipt against the order less than the order qty, than system will set the PDLV Status against that order.Now no further goods receipt is  expected against that order.Now i haven't set the Final delivery indicator in goods receipt tab in process order.But i have technically completed the order,because of which system has set the TECO status against that order.
    Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
    As far as i know, system allows us to do,but on this issue i have got different answers from different person.So bit confused.
    Thanks and Regards,
    Jitendra Chauhan
    Edited by: jitendra chauhan on May 8, 2009 8:42 AM

    Dear,
    Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?
    Yes
    If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
    You need to Final confirm (CNF) the Order to get the DLV Status.
    Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV
    If your order quantity10 and you produced 10 quantity it means that order is fully deliver  then Final delivery will automatically be set.
    The "delivery completed" indicator has the following effects:
    o The item is regarded as closed, even if the total quantity was not delivered.
    o A further delivery is not expected, may, however, arrive.
    If status is DLV then it cannot be a WIP stage where the the good are posted to stock and production is completed
    Please refer this thread fro DLV and TECO,
    Re: order settlement
    Regards,
    R.Brahmankar

  • Goods Receipt in Subcontracting process

    Hi,
    I am beginner in SAP.
    This is regarding Goods Receipt in Subcontracting process.
    I have provided raw material Quantity = 100 Nos. to subcontracting vendor.
    Subcontracting vendor done machining on 80 Quantity, and we have done Goods Receipt for 80 Quantity as Finished Parts.
    Subcontracting vendor found 20 Quantity as Defected.
    Shall I take back 20 Quantity by Movement Type 542.
    OR
    Shall I do Goods Receipt of 20 Quantity as Finished Product and price = 0. & then stock transfer of Finished to Raw Material.
    Please reply.

    Hi,
    It depends on what you want your subcontractor to do with the faulty raw material stock - if you want them to scrap it you can scrap stock from subcontractor stock using movement type 551 and special stock "O" (the system should prompt you to enter the vendor code). If you want it returned for you to scrap it - movement 542 to return it then scrap it from your own stock.
    You shouldn't receive an additional 20 of the finished parts - as you only received 80 not 100. Close the purchase order off to close off the balance of 20 remaining.
    Thanks

  • CDR-21605: Failed while processing Module TIA0398F in function cfbalr() :2378 BOF cfbal

    Hi
    Does anybody have an idea about what is causing the error
    CDR-21605: Failed while processing Module TIA0398F in function cfbalr() :2378 BOF cfbal
    when generating a forms module in designer version 10.1.2.5.
    Other forms modules generates okay. The module generated okay a few days ago. Nothing has been changed in the module, so it's maybe caused by a recent change in the server model.
    Anker Møller

    Hi
    We seems to have the same problem with all modules based on a certain table definition. If the module component based on the table is removed from the module, we don't get the error. But we have no idea what is wrong with the table definition.
    Anker Møller

  • CDR-21605: Failed while processing Module Component % in function c

    I'm generating a form with designer 6i (status 6.5.69.1.0 configuration 4.012). My form is a tabular form, every tab has the subcomponents that refer to previous tab.
    When I create the last subcomponent, exactly the 5th, and I generate, designer give me this message:
    Message
    CDR-21605: Failed while processing Module Component B_JRRP_01 in function cfbfkg_fk_missing_message() :2943 BOF Not in a BoF
    Cause
    The generator failed due to an unexpected error - the
    error indicates the object the generator was processing
    when it failed.
    Action
    When I remove the subcomponent that refer to this module designer generate all.
    I didn't found nothing in metalink, there is someone who can help me?
    Thanks a lot.
    Federica

    Hi
    We seems to have the same problem with all modules based on a certain table definition. If the module component based on the table is removed from the module, we don't get the error. But we have no idea what is wrong with the table definition.
    Anker Møller

  • Error source CAPI2 id 513 - Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object

    Running Windows 8.1 PRO RTM x64 upgraded from Win 8 PRO. Updates to 8.1 as of 17 October installed
    Event viewer still shows newly triggered Error(s) CAPI2 event id 513.
    I can trigger this error by manually creating a restore point invoking VSS.
    The VSS System Writer is listed and is error free.
    Log Name:      Application
    Source:        Microsoft-Windows-CAPI2
    Date:          17/10/2013 20:32:19
    Event ID:      513
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Machine -Name
    Description:
    Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
    Details:
    AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
    System Error:
    Access is denied.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
        <EventID Qualifiers="0">513</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2013-10-17T19:32:19.935384000Z" />
        <EventRecordID>89898</EventRecordID>
        <Correlation />
        <Execution ProcessID="1404" ThreadID="2104" />
        <Channel>Application</Channel>
        <Computer>Machine-Name</Computer>
        <Security />
      </System>
      <EventData>
        <Data>
    Details:
    AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
    System Error:
    Access is denied.
    </Data>
      </EventData>
    </Event>

    Thank you excellent post! I confirmed this fix worked for my situation as well. Below is more detailed post since it did not jump out for me the first time.
    ############################ Details ##############################
    My operating system is Windows 8.1 after installing Visual Studio 2013 when Symantec System recover 2013 ran started seeing 
    the following errors in event logs.
    ################## Example event log errors #######################
    Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
    Details:
    AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
    System Error:
    Access is denied.
    ################## Example event log errors #######################
    Note: Confirmed this fix resolved my issue. 
    Step 1. Download and unzip accesschk.exe to C:\Temp http://download.sysinternals.com/files/AccessChk.zip
    Step 2. Run cmd.exe prompt as Administrator go to Temp directory
    C:\>cd Temp
    Step 3. Run accesschk.exe
    C:\Temp>accesschk.exe -c mslldp
    ################# Example output 1 #################################
    Accesschk v5.10 - Reports effective permissions for securable objects
    Copyright (C) 2006-2012 Mark Russinovich
    Sysinternals - www.sysinternals.com
    mslldp
      RW NT AUTHORITY\SYSTEM
      RW BUILTIN\Administrators
      RW S-1-5-32-549
      R  NT SERVICE\NlaSvc
    ################# Example output 1 #################################
    Step 4. Run following command.
    C:\Temp>SC sdshow MSLLDP <---- Example text 1.
    ################# Example output 2 #################################
    D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1
    -5-80-3141615172-2057878085-1754447212-2405740020-3916490453)S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
    ################# Example output 2 #################################
    Step 5. Run following command.
    C:\Temp>SC sdshow MUP
    ################# Example output 3 #################################
    D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;IU)
    (A;;CCLCSWLOCRRC;;;SU) ######## <--- Example text 2. Grab this value. #######
    S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
    ################# Example output 3 #################################
    Step 6. 
    C:\Temp>
    ### Copy and past Example 1. line in notepad in command promt you can select all then copy the paste the text into notepad.
    MSLLDP D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)
    (A;;CCLCSWLOCRRC;;;SU) ######## <--- Insert Example text 2. here #######
    S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
    Run this command. (Note: Make sure its all one line no wordwrap that the webpage could be showing this text.)
    C:\Temp> sc sdset MSLLDP D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)(A;;CCLCSWLOCRRC;;;SU)S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
    Step 7.
    ##### Check the result #####
    C:\Temp>accesschk.exe -c mslldp
    ################# Example output 4 #################################
    Accesschk v5.10 - Reports effective permissions for securable objects
    Copyright (C) 2006-2012 Mark Russinovich
    Sysinternals - www.sysinternals.com
    mslldp
      RW NT AUTHORITY\SYSTEM
      RW BUILTIN\Administrators
      RW S-1-5-32-549
      R  NT SERVICE\NlaSvc
      R  NT AUTHORITY\SERVICE <--- You should now see this line.
    ################# Example output 4 #################################
    Step 8.
    Ran backup using Symantect System Recovery 2013 the event errors did not return after this fix. Great post again!
    ############################ Details ##############################

  • Goods Receipt for Inbound Delivery through MIGO

    Hi All,
    Can anyone pl. explain me in steps the process of GR for Inbound Delivery from MIGO transaction.
    Also I need the process of reversing this goods receipt done.
    For certain inbound deliveries a dump occurs in the program SAPLIE01 in 'EQUIPMENT_ADAPT_BUSVIEWS' fn module.
    I need to analyse the reason for the dump. Here is the extract from the dump
    <b>IF WA_EQUI IS INITIAL
      keine Equidaten vorhanden => EXCEPTION
    --->       RAISE ERR_ADAPT_BUSVIEWS . ENDIF.                     </b>                                          
    Advance Thanks

    Hi Sanjay and Srikanth,
    Thank you for the correction. I was just wondering over this number.
    Sanjay, regd the release level, it is 0017 for SAP_APPL.
    In brief, when GR is done for an inbound delivery, a fn moudle equipment_adapt_busviews is called, in which if the equipment data of the material (wa_equi) is initial, it gives dump.
    1. This fn module is called 3 or 4 times while the posting is done through MIGO
    2. In the 4th call, the parameter wa_equi is initial - which gives the dump.
    3. While debugging, when I reach this point,if I restart the debugging, I find that the posting is completed !!!! (so something happening after posting of GR gives the dump)
    4. I have to reverse this GR for replicating the same again.
    Any further clues !!
    Regards
    Aadarsh

  • Automatic Payment Process through IDOC and Receive Message Acknowledgement and BANST file format

    Hi Experts,
    We are implementing payment process to our client through Idoc.
    Normally the process will go like below. Once Payment Initiated --> IDoc will generate --> This Idoc process through PI system and send to Bank.--> Once payment data received bank --> it will generate acknowledgement receipt and Bansta file and send it PI system --> This PI system system again send it --> SAP system. Here I want to know the required configuration from PI system to SAP system while receiving acknowledgement and Bansta file. And let me know if u guys have steps...
    Thanks,
    Raviram

    Hi,
    >is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
    yes
    >In that case what should the Message Type we are using in the file-sender adapter look like?
    If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
    Regards,
    Udo

  • Goods Receipt for Purchas Order - WBGMCR02 IDoc

    Hello all!
    I am attempting to create material documents for good receipts of a finished goods purchase order using IDoc WBGMCR02 and message type MBGMCR configured by vendor in WE20 (partner profiles). I am creating test data via WE19 and I'm fairly confident that my IDoc is complete with references to the PO, vendor, material and movement type 101. I am receiving the an error though when processing, to follow..
    CODE is not supported by BAPI2017_GOODSMVT_CREATE
    Message no. M7 259
    Any input is appreciated.
    Thank you.

    Well I got past this error, I had the wrong value in the the E1BP2017_GM_CODE..
    However, I am now facing a new error.. below.
    An error has occurred assigning data (E1BP2017_GM_ITEM_CREATE )
    Message no. B1 527
    Diagnosis
    To call a BAPI the IDoc data must first be assigned to the relevant BAPI interface parameters.
    An error has occured when carrying out this operation, possibly due to an incorrect data type or data format in the segment E1BP2017_GM_ITEM_CREATE.
    Procedure
    Check that the data types in the IDoc data record matches the data types in the BAPI parameter.
    I reviewed that data in this segment against the documentation found in WE60 - this segment allows for data from many different function areas of goods movements (sales, transfers, delivery, PO, etc) and since I am attempting to create a 101 movement against a finished good purchase order I am somewhat confident I have filled in all relevant data in the E1BP2017_GM_ITEM_CREATE segment.
    Does anyone know how to debug this error or have a decent road map for creating this movement type with this IDoc/message?
    Thanks!

  • Failed to process DELVRY03 IDoc  with 36,000 Segment

    Hi All,
    We have interface IDoc to JMS. ECC is sending DELVRY03 IDoc to XI to JMS.
    One of the IDoc couldnt reach to XI & produced memory error dump with exception "Heap limit exceeded on work process"  We have already set maximum heap size for abap/dialog heap.
    This problem occurs only when IDoc has more than 25,000 Segments.
    Is there any other way to compress the data on IDoc side ....?
    Any solution for this kind of situation
    Thanks

    Hi Rakesh,
    While importing the idoc into IR, make sure you reduce the idoc size.
    This could be done in the following manner
    Go to Imported Objects --> IDOC -->Ur Idoc --> Tools -> Export Reduced XSD.
    Use this reduced xsd in message mappings, other wise the mapping tool will fail with a memory dump failure error.
    Also check out ztta/max_memreq_MB parameter
    U may also do the background processing
    IDoc Sending Problem
    U could find some suggestions here
    iDoc performance question
    Regards,
    Prateek

  • Goods Receipt Indicator in Process Order header

    Hi,
    I'm trying to find the source of Goods Receipt indicator field in Goods Receipt tab in order header. For a process order, its in the 'Control' section of the page. Its always ticked on even when no confirmation or goods receipts are posted. Help says it indicates the relevancy to inventory management. I just wanted to know if there is a data or a config that drives this field. I checked in Order type-dependant parameters if that is source of this field, but I couldn't find that option there.
    Thanks in advance experts!
    Regards,
    Abhijit

    Hi Abhijit,
    The flag is always set for orders settled to a material or a sales order item, as mentioned in help. If the settlement rule is different the flag is not set.
    You can do that creating a process order without material (CORO) or changing your settlement profile and not using material as a receiver.
    regards,
    Edgar

  • MIGO (Goods Receipt) Executed...No Idoc

    One of our sites must manually run MIGO, Goods Receipt transaction. All of our other sites use scanners for barcoding that does the MIGO during thre scan. The issue is when our one site runs MIGO manually, unless they exit MIGO and re-enter MIGO, they won't get an idoc. Or, no idoc is created when the user stays in the transaction.
    Has anyone a suggestion or experienced this before?
          Thank-You.

    Hi,
    what do you have in field Further Data -> Dispatch time for output type which represents that IDoc? Do you have there "Send immediately"?
    Cheers

  • Post Goods Receipt for Inbound Delivery via IDoc SHPCON (DELVRY03)

    hi all,
    I'm using IDoc SHPCON (Delvry03) for posing goods receipt for inbound delivry.
    Can anyone give a sample IDoc or tell which segments must be filled.
    Thanks!
    Regards,
    Hui

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • GOODS RECEIPT IN RETURNS PROCESS

    when ever i am doing goods receipt for customer returns in returns & repair process i am getting a message "special stock E not supported"
    please give me a solution as early as possible.
    regards,
    Rajesh Kumar Raju.G

    Do the following
    Check the following:
    SPRO > SD > Basic Functions > Availability Check & Transfer of Reqs > Transfer of Requirements > Determination of Requirements Using Transaction.
    Against, your returns item category (i.e. REN) - please check if you have a '2' in the field marked 'Q' (Origin of Requirement Type).
    As to the the special stock indicator for your item category in view V_TVAP... just check that... what movement type your are using when you sale the goods...
    Check entries in T156X tables and make an entry for movement type 651 without E.
    Try these and hopefully this should fix your probelm.
    Regards,
    Gauravjit
    Reward points if the solution is helpful

Maybe you are looking for