Goods receipt for sales order (sample for inspection)

Hi Experts
Is it possible to enter goods receipt for a sales order?
This process is required for collecting sample from customer for carryingout testing of the sample.
Please suggest the doc types and process steps.
warm regards
ram

Hi Lakshmipathi
Thanks for your reply.
This is a sample received from a client for carrying out analysis and furnishing the laboratory test results as a Quality certificate
So, the sales order is for execution of service (Testing service).
The sample to be received in ref with the sales order and test result to be delivered to customer.
Please suggest the best possible process
warm regards
ram

Similar Messages

Freight from PO or goods receipt into sales order in Third party drop ship

Hello!!!
We have a requirement where the freight charged by vendor in third party drop ship sales order scenario should show up in the billing document to customer. So we will create a sales order with TAS item category. This will create PReq and PO subsequently. Once the vendor delivers the goods to customer and we do the goods receipt in the system, we will bill the customer. While we bill we want to bring the actual freight charged by vendor to the customer billing document. Also we bill the customer as soon as we do the receipt and do not wait for the vendor invoice.
I am not sure if we can do this standard SAP but would like to if anyone has come across this scenario and what is the approach if we need to do this. We can have vendor send us the freight while doing the goods receipt but not sure how to transfer the value to sales order or to billing document directly.
Any help or idea is appreciated.
Thanks in advance,

During GRN we cannot enter any value apart from the excise or customs duty, therefore the freight that you have incured at actuals cannot be captured during GRN and therefore cannot be transfered to the invoice also.
While creating invoice to the customer you can insert a freight condition type and enter the freight value manualy.
Generally in third party scenario we can only invoice the cust after purchase booking has taken place. In your case you want the cust invoice to be created based on grn, for that you have modify the copy control settings.
raj

Need suggestions for Sales Order ATP for Material STO in from other Plant

Our client does not want to stock inventory at either the DC or the Manufacturing Plant. They receive a Sales Order at the DC and the ATP check is set up to check Stock at the DC (likely none); inbound Stock Transport Orders (likely none) and then resort to the Replenishment Lead time.
The Replenishment Lead time for externally procured materials (F) with Special Procurement key (STO it in from the manufacturing plant) is the Planned Delivery Time in the Material Master. The problem is the Planned Delivery time is just the 5 days it takes to get the stock from the manufacturing plant to the DC. If the Manufacturing plant has no inventory (which is very likely since we don't maintain PIRs to stock it prior) we will promise the customer delivery in 5 days which is much too soon.
We cannot inflate the Planned Delivery time to be the 5 days of transit plus the 30 days of total procurement and manufacturing time at the manufacturing plant because then the MRP signal will tell the manufacturing plant to buy and make much too soon.
They don't want to ship goods directly from the manufacturing plant; they must be shipped from the DC.
I realize that this is not a good business process but is there a solution for this?
Edited by: AnnHustis on Jan 21, 2012 6:26 PM
Edited by: AnnHustis on Jan 21, 2012 6:35 PM

Ann,
This is a common practice, and I don't think that the business process is unreasonable.
1. Remove the special procurement key from the RWHS Material Master
2. Change Material Master in the RWHS to X procurement.
3. Set your RWHS Material Master 'Total Replenishment Lead time'
Next step assumes that the company codes are the same between RWHS and Manufacturing Plant.
4. Create Purchase Info Record for the RWHS material, that points to the vendor of the Manufacturing plant
5. Create quota arrangement in which 100 percent of the quota comes from the Manufacturing Plant Purchase Info Record, and is MRP relevant
6. Insert a step after the RWHS MRP run where the Planned orders are immediately converted to Purchase requisitions.
Business process:
a. Sales order is entered. ATP checks RWHS stock and excess inbound.
b. If inadequate supply, then ATP confirms to Total Replenishment Lead time (and not planned delivery time).
c. MRP runs; creates a planned order for the shortage.
d. New step in MRP job converts the Planned order to a Purchase req. Purchase req is sourced via the quota arrangement
e. Purchase Req requirement (Manufacturing plant) is offset by the Planned delivery time to accommodate transit duration.
f. Purchase req demand now places a requirement on the Manufacturing plant, with dates and quantities that will support the Sales order in the RWHS.
g. Convert the Purchase Req to a STO once the stock appears in the Manufacturing Plant.
Best Regards,
DB49

Sales Orders Blocked For Delivery

Hi,
Do we have T-Code for Sales Orders Blocked For Delivery other than VA14L,Because Customer name is not there in VA14L list.
Thanks,
NAG

Hi naga sudhir
Go to T-code--VA14L
In that go to menu-SettingsLayout--Current/Choose
In this layout u can choose fields what u want to appear in that row.
Any quries revert back to me
Regards
Srinivas.

Update KOMV-KBETR field for sales order and billing

I would like to update the KOMV-KBETR (condition amount or percentage) under condition tab for both Sales order and billing.
example:There are two condition types ZA00 and ZB00 and need to get the KBETR value from ZA00 and add it to KBETR value of ZB00 and update the sum in KBER value of ZB00.
1. creation of sales order & billing.
2. Change of sales order & billing.
3. For single & multiple line items in both sales order & billing.
4. during updation of price in the change mode of sales order & billing.
5.When user click on Update button in the condition tab(i.e., when clicked on Carryout new pricing)
I tried with the VOFM routine but as the routine is triggering multiple times the sum is calculated again and again.For that I set flags also.It is working for sales orders but for billing creation the field XKOMV-KBETR is cleared after this routine.
So I would like to know are there any EXITS for this scenario or any one entountered the similiar issue which I am facing.

Hi Brad,
It is an Client requirement.So need to do the addition of that condition types.
Can you please let me know the configuration point where we can do it and the condition type which we need to update the Rate/Amount value.ie., KOMV-KBETR is and Price list value and not the subtotal one.
Thanks,
Srilakshmi Lagisetty.

Goods Receipt for sales order stock

Hi everybody,
I want to receive materials for sales order stock. what I did:
1- Created a Purchase order,
2- Account Assignment = C
3- went to MIGO
4- selected PO number
5- set movement type 101 / E
the SAP give error message that you have not planned 101 / E !!!!
I searched alot but couldn\t find the solution.

Hi Dear,
When you use C account assignment category, System will consume those materials/services for the respective sales order at the time goods receipt/service confirmation. There is no inventory possible when we use, account assignment C as a standard, If you want to make inventorize, we have to choose account assignment category M against sales order.
When we are procuring material against project, Account assignment Q-will be inventoried and P-will be consumed for respective cost object
Like the same M-will be inventoried and C--will be consumed for respective cost object
R,
Amala Srinivasa Rao

Quality inspection for the items issued for Sales order

Hi, How to map the qc for the items issued for sales order?

Dear Yadav,
-Activate insp type 10 in the Material Master-QM view insp setup (MM01)
-Create Inspection plan (QP01) with usage as Goods issue & assign Insp characteristics
-Create Sales order (VA01)
-Delivery against the Sales order (VL01N) or through sales order menu. Delivery Insp lot gets created after Delivery is made.
-Do results recording and take usage decision (QA32)
Note:
-This inspection is non stock relevant inspection. There will be no stock posting through Quality Management.
-Post Goods issue in the delivery can be made only after taking the usage decision.
Regards,
Keerthi.

Price change for material with Goods Receipt with out Order reference?

hi all,
Our client company have some finished products produced from raw materials. But we are not using Production planning module. So in MM we are receiving these products with Goods receipt with out order reference(521).
The issue is, the price for this product will change monthly. This new price will affect the existing stock as moving average price calculation.
ex:
                                 Quantity             Price             Value
Stock balanace        100To                 2.00/To         200
Newly produced      100To                 2.20/To         220
after the GRN for newly produced is done. The price also need to change as below.
Total                         200To                 2.10/To         420
This is easy if we receive goods with PO price, as moving average price will updae in the master record.
But here no reference. So only quantity updated with existing price.
So how to achieve the change of price ? Please help.
Thanks,
Aravind

Hi Bijay,
Thanks for the reply. I will use the posting method suggested by you.
but how you are arriving newly produced material quantity & price!
The reply for your comment is,
Every month My client company revise the price of the produced material based on various factors including the
raw material purchase cost.
The price will be fixed for the whole month.
While posting the GRN, the accounts updated are,
Dr Material account
Cr Production Cost
Please let me know what you have asked is answered or not.
So that i can brief more. This is my initial project. So your feedback is very helpful to me.
Thanks,
Aravind

BAPI For Create Goods Issue for Sales order with picked quantity

Hi friends,
Is there any BAPI available to create Goods issue For sales order with picked quantity...............?
we hv used BAPI_OUTB_DELIVERY_CREATE_SLS
with sales order .......its creating delivery order but not doing goods issue with piked quantity........

pls,reply its argent

Sale order costing for Trading goods

Dear Experts,
My client having retail industry.Client used to sold customers also like outwright customers direct sales not through retail stores. Now business would like to check margin agasinst one sale order through costing. My SAP working enviornment is IS Retail ECC6.0.
1. Is it possible to do sale order costing for trading goods.(Goods p[urchased for all stores not particular customer)
2.Wihtour BOM is it possible?
3.Please forward any user docs ,if possible that costing
Costing sheet like this
1.Trading goods
2.Packaging materila
3.Overheads.Planned
Beat Rgds
Suma

Answerd with Condition type

Sample smart forms for sales order details

M unable to retrieve the data from database to smart form variables.Please send me some standard smart forms names for sales order report.So dat i can c how dey r declared in standard forms.
Thanks & Regards,
santhosh Kumar.

Hi santosh,
here are some of the standard smartforms-print programs
Inquiry     /SMB40/RVADOR01       /SMB40/SDINQ_XX
Quotation     /SMB40/RVADOR01      /SMB40/SDQUO_XX
Order Confirmation     /SMB40/RVADOR01       /SMB40/SDORC_XX
Cash Sales Receipt     /SMB40/RVADOR01      /SMB40/SDCSH_XX
Contract     /SMB40/RVADOR01                 /SMB40/SDCON_XX
Scheduling Agreement /SMB40/RVADOR01     /SMB40/SDSDA_XX
Delivery Note     RLE_DELNOTE     /SMB40/SDDLN_XX
Invoice     RLE_INVOICE     /SMB40/SDINV_XX

Sample script to insert into mtl_transactions_interface for sales order

Hi,
can any one provide me the script to insert into mtl_transactions_interface for sales order transactions. actually i have to create the transactions for all the assemblies/components of C* item (configured item). as per the standard functionality it will create only for the C* item.
Thanks in advance..
Regards,
Sreenath

If I understood your question correctly, your requirement is as follows.
You have a sales order for a configured item - say C*123.
The components of C*123 are A and B.
A and B as well as C*123 appear on the sales order.
When you ship the sales order, Oracle will create sales order issue transaction for C*123.
You would like to use the transactions interface to create sales order issue transactions for A & B.
That is wrong thing to do.
You should not create a sales order issue for A & B.
You need to BUILD C*123 by creating a work order. You need to perform WIP component issue transaction for A & B.
Hope this helps,
Sandeep Gandhi

Fld selectn for mvmt type 543 / acct 2560107 differs for Sales order (013)

Dear experts,
I am trying for normal subcontracting scenario, here I have issued the material against a subcontract order with 541 movement.
Now I am trying for goods receipting,
Initially I got an error message ' Account determination for entry NGA (chart of account) GBB NG01 VBO 5010 is not possible', then I have maintained the combination in OBYC, then I tried again for posting, this time I am getting ' Fld selectn for mvmt type 543 / acct 2560107 differs for Sales order (013)'.
Can any one share your ideas, what might be the reason.
Thanks in advance,
Regards,
Krish.

Hi,
Go to Transaction SA38 - enter Program RM07CUFA and Execute
Enter Movement type 543 and Special Stock Indicator O
Enter Company code
Enter G/L account 2560107 and Execute
Under "Additional account assignments"
You can see the field "Sales order"
Click on the column "MvT" or "Accnt" as required
Now in the new screen double click on "Additional account assignments"
Change the filed selection for "Sales order" as optional and SAVE
This s to be done for both by clicking on "MvT" or "Accnt" one after one.
Now try to post Material Document

What is release strtegy for sales order

hi gurus
what is release strategy for sales order
can any one throw some light
points awarded.
kishore

Dear Rama,
There is nothing like release strategy for sales order. There is a release strategy for purchase order. A bit of search on sdn forum in MM section will help you a lot on this area.
For your reference, The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic   e.g. NETVALUE
Click Additional data Table name CEKKO      Field name GNETW    and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X    Mutliple values
X    Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group   Rel. Object   Class                 Description
02                                 REL_PUR        Rel. Strategy for PO
Release codes - New entries
Grp         Code
02           01
Release indicators
Release indicators           Release        Description
      0                                                        Blocked
      1                                     X                Release
Release Strategy
Release group   02
Rel.strategy    01
Release codes   01
Release status   0
                        1
Classification   Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details

Steps for sales order to MRP Run

Dear all,
Could you please explain what are the steps to process after creating sale order to run MRP and delivery?
Regards
Rajasekaran

Hi Rajaseshekhar,
Following will be detailed end-to-end process steps.
                 Create Sales Order Entering Finished Goods Material
                 Master
Auto Generate Alert(E-mail) to Production Planner
                Create ‘Order BOM’ by Copying Finished Goods BOM (Sales
                 Order Item). Amend by deleting/adding Items in Order BOM at all levels
Auto Generate Alert(E-mail) to Product Cost Controller
Recalculate 'Sales Order Costing' to reflect changes to ‘Order BOM’
Auto Generate Alert(E-mail) to Production
Run Sales Order MRP
Convert Planned Order to Production Order
Capacity Leveling
Release Production Order
Pick Components (Picking List)
Confirm Assembly Activities
Post Goods Receipt (Production Order)
Delivery Processing for Sales Order
Create Invoice
Hope ite helps,
Jatin

Goods receipt for sales order (sample for inspection)

Similar Messages

Maybe you are looking for