Goods Receipt from Purchase requestion

Deal All,
Any possible Goods Receipt from Purchase requisition directly in standard sap or customization or any enhancement.
Plz tell me if any possible is there.
Thanks in advance
Chandhu.

Hi,
There is no possibility to use the Purchase requisition for the Goods receipt dorectly. Standard SAP does not allow that.
Instead of going to the GR directly against pr, you can do the following steps:
Create the PR.
Use the Standard automatic conversion of PR into PO program.
Create the Z report to display the PO against the PR. (You can also use the standard reports available.)
Do the GR against them.
Regards

Similar Messages

Unable to fetch Bach characteristic in MIGO -good receipt from Purchase Order Configuration tab

Dear Gurus,
I have activated classification in Material master for characteristic color , variant is activated and material is configurable material, now i am maintaining characteristic as color in PR form PR when i am creating PO Characteristic value is coming in PO , but when i am doing Good receipt against that PO , characteristic value is not coming in batch classification tab automatically from PO. Please guide me how to proceed.
I have activated - Activate Batch Classification for Goods Movements in IM -
Thanks & Regards
Akshay

Hi,
Introduction to Variant Configuration with an example model
Please follow this document & do the config properly.
Regards

Automatic creation of transfer orders from goods receipt of purchase order.

Hi experts
The project i am currently working on requires the following;
When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins. I am aware that the stock goes straight into the 902 area once goods receipted. Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
In support of this, i have made an entry in transaction OMKX for the following;
Reference Movement Type - 101
Movement Indicator - B (goods movement for purchase order)
Movement Type - 101
TR Create Transfer requirement - X
Immed. TO Creation - A
Addl Data - X
Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
Could someone please help me
Thanks
Simon

Please try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed.

Goods Receipts for Purchase Order using BAPI_GOODSMVT_CREAT

Hi experts,
I am working on the a program where am generating Goods Receipts for Purchase Order. the BAPI_GOODSMVT_CREAT returns an error saying "Material 6003022 not maintained in plant 1001"
Can any one assist? is there a field I may be missing?
Here is a sample code.
DATA: gm_header TYPE bapi2017_gm_head_01.
DATA: gm_code TYPE bapi2017_gm_code.
DATA: gm_headret TYPE bapi2017_gm_head_ret.
DATA: gm_item TYPE TABLE OF bapi2017_gm_item_create WITH HEADER LINE.
DATA: gm_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: gm_retmtd TYPE bapi2017_gm_head_ret-mat_doc.
CLEAR: gm_return, gm_retmtd.
REFRESH gm_return.
Setup BAPI header
"data
gm_header-pstng_date = sy-datum.
gm_header-doc_date = sy-datum.
gm_code-gm_code = '02'.
" MB1A * Write 971 movement to table CLEAR GM_ITEM.
MOVE '101' TO gm_item-move_type .
" MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
MOVE '6003022' TO gm_item-material.
MOVE '10' TO gm_item-entry_qnt.
MOVE 'EA' TO gm_item-entry_uom.
MOVE '1001' TO gm_item-plant.
MOVE '' TO gm_item-stge_loc.
MOVE '0901' TO gm_item-move_reas.
" MOVE '4500006877' TO GM_ITEM-WBS_ELEM.
" MOVE '0020' TO GM_ITEM-VAL_WBS_ELEM.
MOVE '0020' TO gm_item-deliv_numb.
MOVE '4500006881' TO gm_item-po_number.
MOVE '0010' TO gm_item-po_item.
APPEND gm_item.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    goodsmvt_header = gm_header
    goodsmvt_code    = gm_code
IMPORTING
    goodsmvt_headret = gm_headret
    materialdocument = gm_retmtd
TABLES
    goodsmvt_item    = gm_item
    return           = gm_return.
IF NOT gm_retmtd IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.

>
Spark842 wrote:
> Hi experts,
> I am working on the a program where am generating Goods Receipts for Purchase Order. the BAPI_GOODSMVT_CREAT returns an error saying "Material 6003022 not maintained in plant 1001"
> Can any one assist? is there a field I may be missing?
>
> Here is a sample code.
>
> DATA: gm_header TYPE bapi2017_gm_head_01.
> DATA: gm_code TYPE bapi2017_gm_code.
> DATA: gm_headret TYPE bapi2017_gm_head_ret.
> DATA: gm_item TYPE TABLE OF bapi2017_gm_item_create WITH HEADER LINE.
> DATA: gm_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
> DATA: gm_retmtd TYPE bapi2017_gm_head_ret-mat_doc.
> CLEAR: gm_return, gm_retmtd.
> REFRESH gm_return.
> * Setup BAPI header
> "data
> gm_header-pstng_date = sy-datum.
> gm_header-doc_date = sy-datum.
> gm_code-gm_code = '02'.
>
>
> " MB1A * Write 971 movement to table CLEAR GM_ITEM.
> MOVE '101' TO gm_item-move_type .
> " MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
> MOVE '6003022' TO gm_item-material.
> MOVE '10' TO gm_item-entry_qnt.
> MOVE 'EA' TO gm_item-entry_uom.
> MOVE '1001' TO gm_item-plant.
> MOVE '' TO gm_item-stge_loc.
> MOVE '0901' TO gm_item-move_reas.
> " MOVE '4500006877' TO GM_ITEM-WBS_ELEM.
> " MOVE '0020' TO GM_ITEM-VAL_WBS_ELEM.
> MOVE '0020' TO gm_item-deliv_numb.
> MOVE '4500006881' TO gm_item-po_number.
> MOVE '0010' TO gm_item-po_item.
> APPEND gm_item.
>
> * Call goods movement BAPI
>
> CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
>   EXPORTING
>     goodsmvt_header = gm_header
>     goodsmvt_code    = gm_code
>   IMPORTING
>     goodsmvt_headret = gm_headret
>     materialdocument = gm_retmtd
>   TABLES
>     goodsmvt_item    = gm_item
>     return           = gm_return.
>
> IF NOT gm_retmtd IS INITIAL.
>
>   COMMIT WORK AND WAIT.
>   CALL FUNCTION 'DEQUEUE_ALL'.
> ELSE.
>   COMMIT WORK AND WAIT.
>
>   CALL FUNCTION 'DEQUEUE_ALL'.
> ENDIF.
My guess, is that this material is not really maintained in the Plant '1001', to be on the safer side, get the exact values from EKPO itself, also check if this material exists in the table MARC for the plant and storage location.
MOVE '1001' TO gm_item-plant.   "<< Hard coded
MOVE '' TO gm_item-stge_loc.
Replace the above hardcodes to something like this to get the actual value from EKPO.
select werks lgort into (gm_item-plant, gm_item-stge_loc) from ekpo
   where ebeln = gm_item-po_number
        and ebelp = gm_item-po_item.

Goods receipt for purchase assignments has not been posted

Hi all;
In Vl02n in goods issue steps i have a message "Goods receipt for purchase assignments has not been posted"
-the purchas order is assined to items delivery correctelly!
-in our case, we haven't a stock.
-after goods issue in vl02n we have tow goods mvt (101 for goods receipt) and (601 for goods issue) for the same quantity.
so can you tell me how to solve this problem
thx

ok sir ;
No i don't talke abouat STP i don't have any transit stock it's a simpl sales based on global purchas
-first with me21n i created global purchas order
-the sales will be picked from this purchas .
-delivery is assigned automatically to this purchas order with user exit.
-with vl02n in goods issue steps there is tow operations ( stock mvt 101 in purchas assignement and a normal 601 for delivery )

How do I link manufacturing label designed in wwi to print automatically during the time of goods receipts from the production

Hello
Is there any way to link label to print automatically from the printer at the time of TECO ,Goods receipts from production and PGI at the time of delivery to the customers .
Regards,
M D

Hi !
GLM supports Automatic Label Print requests & Automatic Label Printing(immediately after generation of automatic print requests). But this is limited to Delivery order, Process Order & Handling Unit as standard. For other scenarios, you will have to customize.
Automatic Print Request Generation - Global Label Management (EHS-SAF-GLM) - SAP Library
http://help.sap.com/erp2005_ehp_07/helpdata/en/32/a81051e71e2514e10000000a44176d/content.htm?frameset=/en/00/704e3340074776bb6877aa7edb7394/frameset.htm&current_toc=/en/54/c86cb93bdc4d698eb8e2524b59692b/plain.htm&node_id=38
But this is possible with "Enhanced" GLM. It's better explained here,
New changes for GLM in EHP7.0 and ERP 6.0
Regards
Subash Sankar

545 Goods receipt from by-product from subcontracting

Hi ALL,
If a scrap component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted during goods receipt for purchase order or during the subsequent adjustment.
Now, when i'm doing MIGO, it's automatically using mtype 545 + O to receive my scrap to vendor stock. The screen filed of special stock indicator (GOITEM-SOBKZ) is not changeable. I want receive the scrap to normal unrestricted-use stock ( only 545 ) . So how to set the field be changeable?
Thank you .
Wayne.

Hi
By product will be received as special stock during goods receipt.
To transfer the by-products quantities from the "stock of material provided to vendor" to the unrestricted-use stock, you please enter a transfer posting using movement type 542 (reversal of the provision of the components).
warm regards
sairam akundi

MIGO - Goods Receipt against Purchase order. PO rate dispaly.

Is it possible to display purchase order line item rate in MIGO - Goods Receipt against purchase order - Quantity tab.
In Quantity tab - System is showing Qty in Unit of Entry, Qty in SKU, Qty in Delivery Note, Quantity Ordered, alongwith these fields we also want display of Purchase order rate/each of that line item.
Please guide.

BTW you are getting PO number at MIGO and clicking over that you will get entire PO then why you want PO rate display here??

Call BAPI_GOODSMVT_CREATE to create a goods receipt for purchase order

Hi,
I'm calling the bapi BAPI_GOODSMVT_CREATE to create a goods receipt for purchase order, but the following code doesn't work. It doesn't give me any kind of error message but it does nothing as well...
Can anyone help me please?
Thank You
Hugo
Code
DATA: wa_goodsmvt_header LIKE bapi2017_gm_head_01,
                        wa_goodsmvt_code    LIKE bapi2017_gm_code,
                        wa_bapi2017_gm_head TYPE bapi2017_gm_head_ret-mat_doc.
                  DATA: it_goodsmvt_item LIKE bapi2017_gm_item_create OCCURS 0 WITH HEADER LINE,
                        it_return        LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
                  wa_goodsmvt_header-pstng_date = SY-DATUM.
                  wa_goodsmvt_header-doc_date   = SY-DATUM.
                  wa_goodsmvt_header-ref_doc_no = '4500000020'.
                  wa_goodsmvt_code-gm_code = '01'.          "Goods receipt for purchase Order
                  it_goodsmvt_item-stge_loc = 'BPF2'.
                  it_goodsmvt_item-move_type = '101' .
                  it_goodsmvt_item-entry_qnt = 17.
                  it_goodsmvt_item-entry_uom = 'KG'.
                  it_goodsmvt_item-mvt_ind   = 'B'.
                  it_goodsmvt_item-po_number = '4500000020'.
                  it_goodsmvt_item-po_item   = '00010'.
                  it_goodsmvt_item-material = '50'.
                  APPEND it_goodsmvt_item.
                  CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
                    EXPORTING
                      goodsmvt_header = wa_goodsmvt_header
                      goodsmvt_code    = wa_goodsmvt_code
                    IMPORTING
                      materialdocument = wa_bapi2017_gm_head
                    TABLES
                      goodsmvt_item    = it_goodsmvt_item
                      return            = it_return.
                    data: begin of errmsg occurs 10.
                            include structure bapiret2.
                    data: end of errmsg.
                    data: wmenge like iseg-menge,
                          errflag.
                    clear errflag.
                    loop at errmsg.
                      if errmsg-type eq 'E'.
                        write:/'Error in function', errmsg-message.
                        errflag = 'X'.
                      else.
                        write:/ errmsg-message.
                      endif.
                    endloop.
                    if errflag is initial.
                      commit work and wait.
                      if sy-subrc ne 0.
                        write:/ 'Error in updating'.
                        exit.
                      else.
                        write:/ 'Ok'.
                      endif.
                    endif.
                    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                    EXPORTING
                    wait = ' '.

Hi,
Thank you for the asnwer! I'm a rookie at ABAP so please forgive my stupid questions
I've changed the code to:
DATA: wa_goodsmvt_header LIKE bapi2017_gm_head_01,
                        wa_goodsmvt_code    LIKE bapi2017_gm_code,
                        wa_bapi2017_gm_head TYPE bapi2017_gm_head_ret-mat_doc.
                  DATA: it_goodsmvt_item LIKE bapi2017_gm_item_create OCCURS 0 WITH HEADER LINE,
                        it_return        LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
                  wa_goodsmvt_header-pstng_date = SY-DATUM.
                  wa_goodsmvt_header-doc_date   = SY-DATUM.
                  wa_goodsmvt_header-ref_doc_no = '4500000020'.
                  wa_goodsmvt_code-gm_code = '01'.          "Goods receipt for purchase Order
                  it_goodsmvt_item-plant     = 'BP01'.
                  it_goodsmvt_item-stge_loc = 'BPF2'.
                  it_goodsmvt_item-move_type = '101' .
                  it_goodsmvt_item-entry_qnt = 10.
                  it_goodsmvt_item-entry_uom = 'KG'.
                  it_goodsmvt_item-mvt_ind   = 'B'.
                  it_goodsmvt_item-po_number = '4500000020'.
                  it_goodsmvt_item-po_item   = '10'.
                  it_goodsmvt_item-material = '50'.
                  APPEND it_goodsmvt_item.
                  CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
                    EXPORTING
                      goodsmvt_header = wa_goodsmvt_header
                      goodsmvt_code    = wa_goodsmvt_code
                    IMPORTING
                      materialdocument = wa_bapi2017_gm_head
                    TABLES
                      goodsmvt_item    = it_goodsmvt_item
                      return            = it_return.
                      write:/ it_return-message.
And the return message is : Material document data and PO data do not match (Material)
Any idea of what might be the problem?
Thanks

Partial reversal of a goods receipt from process order

Dear All
Could anyone please help me with explaining how to do a partial reversal of a goods receipt from process order? If Iu2019m using trans CORS I have to cancel the entire operation, which I donu2019t want to do. If Iu2019m using MIGO and MT 102 I only reverse the goods receipts of the produced material, the corresponding components from the BoM is not reversed with MT 262 as they are if I cancel with CORS, and I donu2019t want to do a second MIGO transaction in which I cancel the components with MT 261. I have also tried to create an operation with a negative quantity, but without any success.
Itu2019s not an option for the business to reverse the entire quantity and then perform a new goods receipt with the right quantity.

Hi again,
I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
Anyone who can help me on the way?
/WM consultant on unknown territory

Is it possible to do goods receipt for purchase order by mb31

Hello friends,
I have created one purchase order.Now i want to do goods receipt for that purchase order.I know that throught migo and movt type 101, i can do this.But guys i have one doubt over here.Can i do the goods receipt for purchase order by Transaction code MB31(Goods Receipt for Order).
When in Transaction code mb31 i put the purchase order number, system gave me the error,"order 44000000298 not found or not permitted for goods movement".Message no. c6001.
So guys what do you think in this matter?is it possible to do goods receipt for purchase order by mb31.If yes than how to resolve this error.
Thanking you guys in advance.

MB31 is for doing goods receipt of production order

Goods receipt for purchase order is not allowed

Hi,
When I am doing the PO receipt i am facing the error message "Goods receipt for purchase order is not allowed WBS element xxxxxx"
What could be the problem
Thanks
Lucky

Hi,
Please check the WBS element in CJ03, in Basic Data, System status,
Is the WBS is not released or blocked.
Hope it helps you.
Thanks

Goods receipt for purchase order not allowed for a particular wbs

hello everybody..
Am creating a good receipt for a purchase order using the T-CODE-: MIGO...
While doing so am getting an error as " goods receipt for purchase order not allowed(wbs element)".
What can be done to rectify this error?
Plz do help me....
Regards,
Deepika
Moderator message: not directly related to ABAP development, please have a look in the appropriate functional forum, study the long text of this error message.
Edited by: Thomas Zloch on Dec 1, 2010 5:52 PM

Hi Br. Ajay M,
Released the order and Status line as follow
REL AVAC BUDG GMPS
but the error changed while reverse the document
item 0001 Order is invalid.
Many thanks for your kindly reply.
regards,
Steven

Goods receipt for purchase assignments has not been posted. Mes. no. O1573

Dear expert,
I got a proplem with Intercompany STO as detail below:
Goods receipt for purchase assignments has not been posted.
Message no. O1573
Diagnosis
Certain fields needed for posting Goods Receipt have not been entered.
System Response
The goods receipt for Purchase Assignment was not posted.
Procedure
Check the error log and make the required entry.
process Step by steps:
1- create PO (intercompany PO) --> save
2- create SO to sell to endcustomer (at receiving company)
3- create DO
4- assign the previewous PO to DO (exchange function)
5- PGI ---> problem as above
Please, kindly help

Dear all,
In this case, if I enter itemcategory "U" into PO I can post GR and GI at the same time I do PGI. but you know if I use "U" which mean I can't enter the net price as normal because this is a "stock transfer".
Is there any ideal for this?
Please, help me

Menu path - for goods receipt for purchase order (MB01)

Hi
What is the menu path for Goods receipt for purchase order (MB01) - ECC6.0

hi
the path is too deep
plz just log in ur system and find MB01
Materials Management > Purchasing > Master Data > Subsequent Settlement > Vendor Rebate Arrangements > Environment > Condition/Arrangement > Environment >Pricing > Environment Value assignment > Inventory management > Goods receipt >For purchase order > MB01 - PO number known
regards
KI

Goods Receipt from Purchase requestion

Similar Messages

Maybe you are looking for