Goods Receipt generates inspection lot using inspection type 08

Hi,
I have two plants A and B. I have set up my materials with an 08 inspection type plant B. Material transfers from plant A and B generate an inspection lot using inspection type 08 and inspection lot origin 08. This works perfectly.
However if I use a stock transfer between two storage locations within 1 plant, using stock transfer order, inspection lot is generated using inspection type 08 when GR is performed.
Is there a link between 08 inspection type and 101 movement
Regards

Yes ,101 & 08 are associated with each other for stock transfer order that is only when receipt indicator is "X" and mvt indicator is prchase order.
If you do not want this to haapen then
copy mvt type 101 as Z01 & for this mvt type deactivate QM in
QCC3->inspection lot creation->Inspect for goods mvt->Deactivate Quality Inspection for a Movement Type>Z01-->deactivate
Use this mvt type when you are tranferring material from storage location to storage Location.
This will not create any inspection lot.
Edited by: Sujit Gujar on Aug 4, 2011 1:09 PM

Similar Messages

  • Multiple result recording for Manual inspection Lot using inspection point

    I want to record inspection result for inspection type 89 against *inspection point*. Then I create new inspection point and assign it in quality plan. Then I have done the multiple result recoding against one manual inspection lot in DEV server. But when it is going to QAS server then error is coming during result recoding. Error is "The results transaction cannot be used for
    inspection" Message no. QE094.
    Plz give me the solution to record the result.

    Reason is very simple : the  the inspection point definition in the task list header is incompatible with the sampling procedure assigned to the characteristic.Make sure that you select the appropriete radio button in QDV1 while creating sampling procedure and assign the same against each of the MIC's in the task list.
    Make sure that the sample tab in QA02 is pressed while assigning the inspection specification & status of the lot is REL

  • Inspection lot for Mvt type 311 between two storage location only

    Hello all,
    I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
    For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
    I have activated inspection type 08 but it does not have a restricition on S.Loc.
    So please suggest some solution for the same.

    Dear Amit
    In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
    So whenever you want inspection lot to be created use Z11.
    You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
    Regards
    Gajesh

  • Inspection lot for inspection type 08

    Hi Eperts,
    Please tell me following:
    Inspection lot does not create when transfer material from plant to plant.
    Created STO PO in plant 1000. Issueing plant is 2000.
    MMR maintained in both plant with inspection type 01,08 activated in both plant.
    As per me system should create inspection lot after GRN takes place against STO PO in plant 1000.
    What could be problem.
    Regards,
    Raja

    Hi Raja,
    In your previous posts you referred to performing a 101 movement to try get an inspection lot of type 08, this is incorrect.
    For movement type 101 you need to activate inspection type 01 and place a block on the q-info record against the vendor in order to get an inspection lot of type 01.
    In your scenario, you are wanting an inspection lot of type 08. This is an internal stock movement and wont work with a 101 movement as this is for incoming stock. You should activate inspection type 08 on the material master and use a movement type such as the 322 to move stock to quality inspection. This will create an automatic inspection lot of type 08 as long as you have set QM not active = '  ' for mvt type 322 under SPRO -> Quality Management -> Quality Inspection -> Inspection Lot Creation -> Inspection for goods movements -> deactivate quality inspection for a movement type.
    Regards,
    Roderick

  • Inspection lot for inspection type 10,11,12

    Hi,
    My requrement is system should generate inspection lot at the time creation of sales order & before PGI.I assigned
    inspection type 10,11,12 in QM view in material master.I have a quality planning with usage -3 & status -4.But when I am creating sales order & doing PGI system is not generating inspection lot.
    manoj

    Hi
    check following   QCC0>Qulity inspection>Inspection lot creation>Inspection at shipping>
    Assign Inspection Lot Origin to Delivery Type
    Assign agaist del type:
    10 ; Outbound Delivery
    11 :Delivery w/o Ref.
    similerly for 12
    Also
    Assign Inspection Type to Delivery Category -->assign inspection lot origin & Inspection type for del catagory
    Regards
    Sujit

  • Inspection Lot for inspection type 09_ Vendor field is blank

    Hi,
    Inspection lot for inspection type 09. I am not getting the vendor name in inspection lot details. Vendor field is blank.
    I need this field updated. Please guide me what to do for this.
    Thnaks & Regards
    Kundan kumar

    HI Ashok,
    I checked in material batch data( msc3n) vendor details is there.
    Please update me more in this regard
    Thanks & Regards
    Kundan kumar

  • Manual Inspection Lot for Inspection Lot Origin '04'

    Dear SAPians,
    We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material  for the Specified Origin. I feel that there is some customizing issue. Please suggest.
    Thanks

    Yes Atul,
    The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
    So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
    The system will ask you for the Order number.
    NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
    Regards,
    Shyamal

  • Auto Goods Receipt posting in ECC using VL32N

    Hi ,
    We have a situation where in we have to post Goods receipt in ECC thru inbound IDOC with reference to  SNC - ASN.
    Till now we thought of using MBGMCR  - Message type with Idoc type : MBGMCR03.
    As MBGMCR uses BAPI - MB_GOODS_MOVEMENT - It calls in transaction : MB01 to post goods receipts.
    Which is the real problem - here we are posting goods receipts against SNC- ASN  number by passing this ASN number into E1EDP20 segment field LIFEX  but in the VBLEN field this BAPI is considering Material document number - Which in turn is not  updating inbound delivery document flow after goods receipt is posted.
    we have noticed same  inbound delivery is been considered multiple times for Goods receipts - because the inbound delivery document flow is not getting updated -  Which is the issue.
    Can any one used an IDOC (inbound ) in ECC to post Goods Receipt (101 movement ) which uses VL32N transaction.
    And is it a BAPI or any other thing ?
    Would appreciate your help.
    Regards,
    Mahesh

    We have used Message type : WMMBXY with an enhancement to user exit to mark status of inbound delivery to complete after entire quantity of Inbound delivery has been received.
    Thanks,
    Mahesh

  • Steps For Goods Receipt For Work Order Using Handling Units

    Hello MM gurus,
    I'm new to HU Management.  Can you please share with me the steps for executing a "Goods Receipt For Work Order" using Handling Units?
    I created a HU (1000000026), and then using transaction COWBHUWE I tried using that HU to create a goods receipt, but I keep getting the message below:
    Handling unit 1000000026 is not provided for goods receipt
    Message no. VHURM046
    Do you have to assign/plan HUs to Process Orders first? I think the problem is that I'm not understanding the process or the requirements for a goods receipt for work order using HU.

    Hello Manish Kumar,
    I've been doing Handling Units testing in our sandbox environment and I've been trying to Pack a Finished Product for a Process Order using
    1-Transaction code HU02 to create the Handling Unit
    2-Transaction COWBHUE after creating the HU to enter the production order number and the HU number and propose it, but the it doesn't work. When I propose it, nothing happens.
    3.-I also tried COWBPACK, but for some reason, when I go into COWBPACK, key in the Process Order, and then press enter, I get the following message:
    You do not have authorization to create handling units for plant BP08
    Message no. VHUPD500
    Do you know how to solve this issue?

  • Inspection lot with inspection type 03 - Using Inspection plan

    Dear friends,
    I want to create an inspection lot at the time of production order release (ideally - insp type 03). But I want to use inspection plan as a task list instead of routing for that lot.
    Is it possible?
    Best Regards,
    Avinash

    Hi Swapnali,
    Was expecting this re-question.
    We are at a stage where system is already ready. The routing master data contains large number of alternatives and huge number of parallel sequences. We were looking for a solution in which we would make an inspection plan without touching routing master data. Second I want to create the lot at the time of order release (basically one lot per production order) so don't want to use insp type 04.
    In config, I assigned task list type Q in front of lot origin 03 (Maintain Inspection Lot Origins and Assign Inspection Types).
    But still system is picking the routing and not inspection plan. Is there a way out?
    Regards,
    Avinash

  • Inspection Lot for I type 10 does not generate

    Hi team,
    When SD does a PGI, as per Material I type-10 a lot should be generated. but this fails to occur. I type is active on the material. Infact it has 4 and 10 active. I lot for i type 4 generates fine, but for i type 10 it does not. QM control in SD for customer(QV51) is also created. Am i missing something here. I did some search and tried checking will all those steps too. but no go. Any suggestions

    Hi,
    Let us understand the inspection type 10 first. It will create an inspection once the delivery note is made. I guess you seek one after the PGI. Did you get one after the delivery ?? Or may be there is some confusion with the words
    Other than what Anand has suggested, please check what is maintained in customer specs in Cust info record (QV53). It should be Before delivery if PGI is to be blocked before inspection or After delivery to make PGI possible without inspection.
    ntn

  • Goods receipts blocked stock and quality inspection

    Hi,
    we want to create an inspection lot for an initial sample automatically as the goods receipts is posted. At the same time we don't want the amount to appear in the normal quality inspection stock or in the normal blocked stock but instead it should be posted in the goods receipt blocked stock.
    Is it possible to post it automatically to the goods receipts blocked stock?
    Is it possible to create an inspection lot automatically for this?
    Thanks,
    Marcus.

    This isn't something that is straight forward, like just running a report.
    You have to look at the field QALS-LMENGEZUB which is the quantity to be posted of he inspection lot.  Keeping in mind that you can have multiple inspection lots for the same batch, you'd have to get all qals records for the batch you are interested in.
    You then have to compare all the related MCHB records for the material and ln that table sum all the values in field CINSM.
    That should show you any inconsistencies between the MM and QM.
    I am assuming this is for batch managed, non-HU managed materials.
    If not, let me know and we'll take another crack at it.
    FF

  • Inspection lot using WM movement

    Dear All,
    I am using QM with WM. I want to create an inspection lot when I am move stock from one bin to another.
    Is it possible using a WM movement type and no IM movement type?

    Hi,
    For automatic inspection lot creation. is based on IM movement type only
    what movement type u will use for bin to bin transfer
    why u need inspection for Bin to Bin transfer ?
    thanks

  • Multiple notification against single inspection lot (03 inspection type)

    Dear friends
    While recording the defects multiple times against single inspection lot (03type) , all the defects are added in single notification, but my client requirement is they want different notification.  if any body knows please tell me.
    Note : in inspection type there is a option of multiple notification against single inspection lot, but this is
    not working (i think it will work only serial number,equipment and  functional location get changed)
    Please do the needful
    Regards

    Hi Karthikeyan
    As you mentioned it is not possible to create notification  other than based on the object types.
    A work out can be make an action box in the notification for creating another notification with the help of ABAP ( call transaction QM01) and while doing this the entire datas of the inspection lot gets copied into the notification. you may have to use a user exit also.
    Defect can be recorded in the item level by the user.
    Sounds difficult but certainly possible
    Regards
    gajesh

  • QM Manual Inspection Lot - with Inspection lot origin 89

    Hi QM Guru,
    I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
    I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
    No valid inspection type for material 10000037 was found or selected
    Message no. QA280
    Diagnosis
    An active inspection type for the material 1XXXXXXX in plant XXXX could not be found for the specified origin 89 or none of the available inspection types was selected.
    System Response
    Inspection lots cannot be created.
    Procedure
    Check the inspection type setting in the material master.
    Is there anything which i missing ?
    Thank you.

    Hi,
    I hope you have got the answer for this query. You get this error because you are trying to create a manual inspection lot (origin 89) of a material for which Inspection type 89 is not activated.
    From your statement,
    I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
    I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
    It is clearly stated that you are using different inspection types. As Rama has suggested, activate Inspection type 89 in the material master and make corresponding master data.
    Other than that, you cannot create manual inspection lot for the origins 10, 11, 12, 13 & 14. Similarly, Automatic inspection lots cannot be created for origins 07, 15 & 89. This answers your further query raised in the thread.
    ntn

Maybe you are looking for