Goods Receipt / Goods Issue / Transfer Posting

Hi
Scenario:
A pack contains 6 materials of same type but of 3 different colors viz Red:2; Yellow:2; White:2.
I purchase this pack and sell the same pack.
If sales of this pack is not not much, then i do a Goods Issue to a Cost Center. And then i want to do a Goods Receipt into my Inventory as individual items of 6.....2 nos. each of Red, Yellow and White.
How to do GR in to my inventory all the four materials viz:
1. Pack (of 6 material)......ofcourse i am able to do w.r.t PO.
2. Individual entry of all 3 types Red,yellow,white
kindly answer me ASAP
cheers
MaruthiRam

As per your 1st post, it seems that there would be a material code for Pack and 3 material masters for Red, White and Yellow materials (If not then create)
And when you are selling to customer, you are selling the pack not individual material and when you are issuing against cost center, issuing the pack only.
So
GI of Pack; MIGO - Goods Issue > Others (Movement Type 201)
And GR of Red, White and Yellow materials; MIGO - Goods Receipt > Others (Movement Type 202) from Same Cost Center as in GI. Enter Red, White and Yellow materials, plant, storage location, quantity, etc... manually.
The above 2 transactions to be done separately 1st GI and the again go to MIGO and do GR.

Similar Messages

Auto print of Goods Issue/Transfer Posting Documents by Movement type

Hi,
We have created two different output types to print the layout's of Goods Issue/Transfer Posting Documents.
The requirement is to default the message in the document by movement type (key combination)
Meaning if it is 201 it should populate GI output type
If it is 313 it should populate TP output type.
we do not have any standard key combination (NACR) by movement type wise.
Any alternative way of meeting this requirement?
Thanks
Regards
Ram

Hello Kevin,
I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
Success and thanks beforehand for any credits!
Kind regards,
Bart

Create a subsequent Goods Movement for a transfer posting

Hi Team,
I have a scenario where the users will create a Good Movement document for transfer posting. The Stock of Material "A" is transferred to stock of Material "B" using the movement types 561 etc. Now the quantity is reduced from unrestricted stock of "A" and posted to "Stock in Transfer/Transit" of "B". The requirement is to create another Goods Movement document immediately after the above transfer posting is completed and use movement type 101 to post the same quantity to unrestricted of "B".
I tried searching for use exits and could not find a relevant one "After Save" for goods movement online transaction. I found the MB_GOODS_MOVEMENT_UPDATE Badi but don't know how to create another goods movement document while in the update task. I'm concerned that if I call a BAPI or BDC inside the update task, it might conflict with the current transaction (transfer posting). Looking for your guidance.

Hi Deepali,
You can use the userexit ' ZXMCBU02 ' to write your own code. This user exit gets triggered for almost all the goods movement transaction.
There is also a very similar BADI which you can use which gets triggered for every goods movement transaction.
I would like to know the BADI feel free to let me know. I think the above user exit should server your purpose.
Hope this is useful for you.
Cheers
VJ

Configurable system message No Goods Receipt/Delivery has been posted

When user add a new AR Invoice or AP Invoice without creating prior to it
Goods Receipt or Delivery document system always displays message: 'No
Goods Receipt/Delivery has been posted. Continue?'. This message should
be configurable as for users which don't use Delivery or Goods Receipt PO is useless. User should decide if he or she wants to display it or not. For most customers clicking on this message is a huge wasting of time as it displays at every sales or purchase operation.

Hi
If you use Shipping notification then you have to create inbound delivery VL31n and do the PGR in inbound delivery VL32N itself.
Incase of scheduling agreement schedule lines you have to make sure the following
1) Schedule line delivery date shoud be todays date or in the past
2) Schedule must be released by using message type based on the type of schedule ( Normal, JIT or forecast)
Hope it helps
Thanks/Karthik

Crystal report 2008 for B1 Join report of open PO, good receipt, good retur

Hi All,
I am new to crystal report for B1. I am developing a report for showing all open purchase order, good receipt, good return, A/P Invoice and A/P credited memo rows for selected project.
This is similar to open item report, but I need to show detail rows (items) for each of those Document. I can easy do a select token with project code for only one type of those document e.g. open purchase order (link OPOR with POR1 and select records by project code).
My question is how to do a report with those 5 types document together. I did try to include all those tables, but I canu2019t find a link between them. Or Can I do something link sub reports to include all those report by using one selection token? How can I do it?
Any comment, ANTHING will be very much appreciated!!

Hi Julian......
yes you are correct use OLE DB connection and when it shows your PC Connection then just put the necessary information related to SQL server and DB for which you want to create this query.
Once you put all these info then click on next and then finish.
It will show you the Command option and one more option in expand and collapse format where all the tables and views of database are present.
Just double click on command and paste your query report and add it......
Now its set to design CR for your query as per requirement.....
Regards,
Rahul

Dynamic Availability Check for Goods Issue,Transfer Posting

Dear All,
Can anyone explain the Dynamic Availability Check??
I mean the relevance on setting this indicator for a mov.type?
In OMCM & OMCP I have defined a Checking Rule & also assigned the same to a Mov.type as well the transaction code?
whether the Dynamic Availability Check concept is same in case of sales ie Say I have a Stock of 100 qtys for a material in a plant & in the availability Scope of Check I have ticked the include safety stock.
In my material master I have a safety stock of 500 qtys.
So when I do a transfer posting for this material with Qty as 200, System should allow me do proceed as in my availability check I have enabled the safety stock option.
But this is not happening & I am getting an error message as deficit of stock 100 nos. Also what is use of setting the dynamic availability check indicator for my mov.type as A - Warning message , B - Error Message etc..
Kindly suggest valuable inputs.
Thanks & Regards,

For e.g. there is Available Stock = 1000 qty and safety stock in material master = 500 qty then system will allow you to use 1000 qty only not 1500 qty
This is only used for availability check purpose whether system it should be considered or not?
And following indicators means;
A W mess. only issued in the case of non-availability
B E mess. only issued in the case of non-availability
E Message in any case: W mess. for non-avail., otherw. S mess.
F Message in any case: E mess. for non-avail., otherw. S mess.
S Availability check only with simulation
The above indicators indicate whether the system is to check for existing material requirements.
Award appropriately once the thread is answered.

SAP R/3 goods receipt and issue process through RF

Dear All,
We need the below information.
In order to setup RF enabled goods receipt and goods issue what basic infracture we need to have.
we are not intersted in using WM module, with out WM we can go for this ??
Is this the right forum to post this question...
Abdul Raheem

Hi.
I've just carried out this architecture. You have to check 2 things:
1- Are your DB software levels the same? (AIX + Windows)
2- Have you checked connectivity from client to DB server?
Regards,
Fatih Erten

DTW Good Receipt Doc. date and Posting Date

Dear Professional,
I have tried to use the DTW Good Receipt Template (oInventoryGenEntry) to unpload the initial open on-hand inventory into B1.
However, no matter the DocDate (Posting Date) and TaxDate (Doc. Date) I have entered into the Document Template, the system still set "Today" as both Posting Date and Doc. Date after completed uploading the inventory on-hand, is there anything can help to solve or something I missed ??
Thank,
Deckard

Dear Deckard,
When I did the this DTW, I found the same issue. B1 probably not allow to import back dated Good Receipt transactions by DTW.
Thanks,
Gordon

Goods receipt can able to post without releasing the scheduling agreement.

Hi experts,
We have the SA which is created with document type LPA. Line item is having the confimation control key 0001.We believe that without releasing the SA we can't make the GR.
ASN has been posted against the SA but without releasing the agreement i can able to post the GR.
If we didn't create any ASN system won't allow us to make the GR.
Kindly explain the usage of the doc type LPA and the conf contrl key 0001 in the SA.
Thnaks for your help
Reg
raj

Hi,
In order header, go to goods receipt tab, check the storage location maintained. I think this storage location / plant combination is not linked to warehouse 717.
Hope this answers your query.
If helpful award points
Regards,
Vivek

Report with goods receipt value and invoice posting value

Is there any standard report with goods receipt value and invoice value (the value with which invoice is posted.

Hi
Please check MC$4 transaction, mey be helpful.
regards
Srinivas

Goods Receipt, Good Issue Batch Control

I'm trying to import Goods Receipt and Goods Issue using the DI API for version SAP 6.5 SP1 Patch 17. I was able to import for item that were not batch controlled but not for batch controlled items. I was wondering if anyone had a code sample on how to do this or point me in the right direction. Thanks for any information you can provide. Thank You Steve

Hi
The following code works. Please have in mind to use valid ItemCodes and BatchNumbers.
Retrieving Batch Numbers
        Dim lRet As Long
        Dim strItemCode As String
        Dim oWOut As SAPbobsCOM.Documents
        oWOut = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenExit)
        strItemCode = "xyz"
        oWOut.Lines.ItemCode = strItemCode
        oWOut.Lines.Quantity = 1
        oWOut.Lines.BatchNumbers.BatchNumber = "b0204"
        oWOut.Lines.BatchNumbers.Quantity = 1
        lRet = oWOut.Add()
        If lRet <> 0 Then
            SBO_Application.MessageBox(oCompany.GetLastErrorDescription)
        End If

How to stop the goods receipt before issueing the goods for production orde

Frndz,
I have created a production order, now before even making the issue of rawmaterials from the inventory the system is allowing the goods receipt for that production order , kindly tell me the step by step procedure to check it.
Regards,
Srini

Hi Srini,
there are couple of ways to handle this situation..
1. If you set all the components as Backflush relevant in Material Master or setting all Compoents tick in OPK4 will ensure that at the time of confirmation you will have all the components will be done auto GI.
Now in your control key or Prod. scheduling profile specify that Auto GR.
Now your GR & GI are linked.
In OPK4, in the 2nd Tab page, termination of Goods Movements and Goods movements Ticked, so that when ever there is a problem with the components system will terminate the Confirmation.
So there will not be any GR without GI.
But, one can make GR with MB31 or MIGO
(So this is an option but no fool proof method).
2. Activating the User Satus (Status Profile) so that once the GI is done only you allow the Confirmation.
(The settings we can discuss if required).
3. Having the Use Exit..
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below links for further details..
do not confirm without goods issue
default quantity of confirmation(co11) should allowed in goods movements mb
Revert for further discussion..
Regards,
Siva

Goods Receipt Note Issue

Hi,
I have raised Good Receipt Note without giving Storage Location.
In MMBE I cant able to see the stock but 101 movement is happend.
Please let me know where can I see the stock.
Regards,
Karthik

Hi Kartyic,
Please check the PO, must be raised by the Account Assignment, else the system would not have allowed the to post the GRN without Storage Location, Else it might have been defaulted by PO.
in MMBE check for the respective storage location that given in PO.
Hope it helps
Regards,
Yawar Khan

How to generate goods receipt / goods issue (gr/gi) slip no. ?

Hi all SAP experts,
i did following steps
1) by using omc1 assigned gr/gi slip number for our plant.
2) created internal number range for no. range group code.
3) intervals are created for gr/ir slip in 2009 by using omj6 t-code.
4) assigned no. range group code to plant and movement type 101.
When i create Purchase order and taking goods receipt w.r.t. p.o. still gr/ir slip no. not generated internally . I checked it for MB51 t-code still gr/gi slip column is empty i.e. no number generated.
So how can i do gr/gi slip no. generated internally ? and what is the transaction for printout of gr/gi slip no. or related configuration ?
regards,
Nitin Nerkar

Dear,
Make this field RM07M-XABLN as mandatory in OMJX transaction and check it in OMC1.
Regards,
R.Brahmankar

Document type during Goods Receipt in Intercompany Transfer flow

Hi,
We create a PO, Delivery and GI in company A
We do a Goods Receipt in company B.
Can we customize that FI document type ZZ is used during Goods Receipt in company B?
Document type ZZ may only be used in the Intercompany flow.
Where can I customize this setting?
Thank you in advance,
Best regards,
Eric van Zundert.

Hi,
The following are the standard steps to create an accounting document type and assign it to a transaction.
1) In T-code OBF4, click on "Financial accounting document types" and create a new document type.
2)On the same T-code, Click on "Goods receipt document type" and assign the document type to the transaction.
3)On the same T-code, Click on "Financial accounting No range" and assign the number range for each document type based on company code and fiscal year.
Thanks and Regards,
Maheshwari

Goods Receipt / Goods Issue / Transfer Posting

Similar Messages

Maybe you are looking for