Goods receipt quantity more than po quantity -units

Hi
Purchase order is created for 100 units
But Good receipt and Invoice receipt is 125 units
I was unable to post the goods receipt of 125 units against the PO order of 100 units
Can you let me know how do i post the good receipt of 125 units and let me know the Img setting
which needs to be done for goods receipt to be posted
Thanks

Hello,
In case the business has decided that the goods receipt of 125 is correct as against a PO of 100 units, then before the Goods receipt, the PO has to be amended to 125 units. By doing so, the GR and the IV would not have any problems.
Regards
Venkatesh

Similar Messages

Blocking Goods Receipt for more than one PO

Dear All,
We have a requirement. We do not want to do goods receipt for more than one PO.STD SAP is allowing us to do the same.
Can we block it ? We want one One Material Doc for One PO .For One PO there can be more than one material document but vice versa must not be allowed.
Thanks & Regards
Abhijit Das

seems to be possible with custom development
logic may be as follows
This is just a generic suggestion
If I put PO number and press enter then the field where we put PO should become grey...
take help of abaper to findout the way.....
GIVE A TRY.....

Withdrawal quantity more than Committed Quantity

Hi Gurus,
I am facing 1 problem with Withdrawal quantity for 1 component for Production order.
I have a Production Order of 430 Quantity .
When I check components , it is showing Committed Quantity as 435 while withdrawal Quantity as 439.
We have activated backflush.
Can anyone tell me why Withdrawal quantity more than Committed Quantity and order quantity?
--Denish

Hi,
Commited quantity is the quantity which, according to the availability check, is available.
Wwithdrawal quantity is the quantity that has already been issued.
Probably, you issued this component more than you planned, however you have done this issue with backflush of production confirmation. Therefore, issue is still on planned issue and withdrawal quantity exceeds your planned quantity, and commited quantity is less than withdrawal quantity.
Regards.
Onat

SAP sales return system should not accept quantity more than open quantity

Dear All
During sales return user is able to enter the quantity more than open quantity and system is allowing for that enter
Plz tell me how to restrict this
Regards
Arun

No need of exit for this.
Go to VTAF, select the item category for the combination of order type and billing type and maintain "+" for the field "Pos./neg. quantity"
Also go to OVAH and change message class V4 no 229 to E will work.
Now try to create a return order and increase the quantity. Sytem will not allow to do so but if you create a new line item, then system will also for which, you can go for exit already suggested.
thanks
G. Lakshmipathi

Transfer order craeted with a quantity -- more than delivery quantity

Transfer order created with a quantity more than the delivery quantity. I have tested in several ways but didn't get the root cause for it.
Any possible ways available to create a TO like this????????

Hi Aktar,
You have not mentioned the type of TO. Where did you get this scenario. was TO created Manually or Automatically? please confirm.
Anyway incase of manual creation of TO, User keyin quantity enters morethan delivery quantity, then there is a chance of excess picking compared to delivery quantity. but this is only possible if the sufficient SKUs are available at this time.
please let me know.....
Regards
Venkat

541 quantity more than PO quantity

Dear Freiends,
For subcontracting PO we can send (541) components more than the quantity maintained in Purchase order. How to restrict this ? We donu2019t want to send material more than Purchase order component quantity.
Pl send your views
Regards,
Poonam

Analyse your process.
If you dont want to send more than needed for one PO, why do your shipping guys then send more?
Dont you use ME2O as starting point for your supply to the subcontractor.?
The movement to a subcontractor is not PO related, and I doupt that it can be made PO related with the given intruction by kunal ingale, as SAP has stated in an OSS note, that it is not possible (but try it, I am intrested on your findings).
It makes sense that it is not PO related. if you are doing ongoing subcontract business, then you probably like to optimize your freight rates, so you may send raw materials just once a month to your subcontractor, and not always partial truck loads that are more expensive.

Material issue quantity more than resevation quantity

Hi,
My problem is, user can issue the material quanitty agaist a reservation more than reservation quantity. We are using movement type 281 Q and issuing material against a reservation no. How to stop this?
Regards,
Kalpesh

Hi,
This a standard functionality, material can be issue more than reservation. Beacause reservation is nothing but just a booking process
Check for any userexist take the help of ABAP person
regards
Edited by: Roy Anamika on Jul 9, 2009 11:48 AM

Goods receipt of more than one batches for Production Order

Hi ,
We are assigning the Batch number in CO01 t code as A1234.1 for Order quantity 100.
I am doing the partial GR and also for the next successive GR's I want to do the GR with batch number as A1234.2, A1234.3..
System is not allowing me to do the Goods recipt for the Batch A1234.2, .3, .4...in MB31.
Please let know if any other way to Goods Receipt.
Amit Shah

We are assigning the Batch number in CO01 t code as A1234.1 for Order quantity 100.
Dear You are assigned the Batch number in production order, SO It won't allow other than That Batch Number during GR.
IF you want different batch for each GR then remove the Batch assignment in Production order

GR Quantity more than PO Quantity but no differential payament to be made

Dear Expert,
We are importing Ammonia for consumption in India. In many times actual GR quantity is more than the PO quantity, however only Customs payment are made against the excess qty received, no other payment to be made towards port handling, suppliers, stevedoring charges, port dues etc. So before GR we only do customs invoicing for GR quantity so that it get inventorised. How ever our MM people only doing GR for the PO quantity.
When we asked why they are not doing the GR for actual quantity they replied that value will be posted to various clearing a/c like, port dues clearing, customs clearing, insurance clearing a/c etc, where there is no actual payment to be made.
Please suggest how can we do the actual GR quantity with out hitting the clearing a/c, any solution???
Regards,
Alok

Hi,
First let me ask one thing ,is so they are doing GR first or IR first .
Becoz the Question a Bit confusion.
But if my understanding is right.
You can do the Invoice for the over delivery and also the IR first that to GRN.
so maintain a Overdelivery Percentage in PO and try to Post the MIRO Before GRN.
but in MIRO,you should select the Option of Planned Delivery Costs.
and you have to define different condition type for Different Conditions like Freight ,customs and insurance etc..
Know in the Miro Select only the Custom releated Condition type and uncheck the other.
so that only that GL will come.
try and let me know
Hope so it would help
Regards
Anjanna

Automatic goods receipt for more than one phase

Hi all,
I want to make automatic goods receipt in the confirmation COR6N for more than one phase , i know that it is not possibe in the standard system but is ther any fuction module or note can support this issue?
Regards
Ahmed Sobhi

Dear Ahmed Sobhi,
If my understanding is correct,then it's not possible to perform Automatic GR for more than one operation or phase in standard
SAP.
Regards
Mangalraj.S

Goods receipt more than intransit quantity for SA

Hi All,
While doing a testing on stock transport order for 2 different company code, noticed that during MIGO in receiving plant system is allowing to receive more than in-intransit quantity for a schedule agreement with agreement type LP and by showing a negative stock in intransit.
Is there anyway to have the system block with error message from preventing user to receive more than intransit quantity for a schedule agreement?

negative stock in transit is not allowed.
so it must originate for a SAP bug.
E,g, OSS note 527403 explains a case for IS-OIL Industry solution.
Oss note 210472 a special case regading previous month.
I found about 60 OSS notes when searching with "in transit negative"

Service entry sheet - GR quantity is more than confirmed quantity

We have a service based PO with Acct assignment F and Item category D.
We have ticked Goods receipt in delievery tab.
We have ticked 1) invoivce receipt and 2) GR-based IV. ( S-based IV is not ticked)
There is no purchase order history.
While making the service entry sheet and accpeting it , system is throwing an error log "GR quantity is more than confirmed quantity".
But we have not confirmed any quantity.
Please advise how to solve this error or what could be wrong in PO.
Thanks,
Manohar

Hi,
Go to ML81N, put the PO number and find out Is there any service entry sheet with No acceptance(Red Mark) is found there or not for that PO Line Item.
If yes, thenclick on that...go to change and delete that SES ......
Hope Clear U !
Regards,
Pardeep malik

Return delivery more than issued quantity

Hi,
I posted the goods issuance quantity 10 with mvt 201, when return delivery with mvt 202 then system allow to post more than issued quantity.
is there any restriction or standard error message to control this.
Regards,
Ali

Hi
Are you not cancelling the document with reference to the original document. In this system will not allow you to change the quantity.
Also, refer to enhancement MBCF0005
and BADI: MB_QUAN_CHECK_BADI
Thanks
Sachin

Purchase Order Quantity should not be more than PR quantity

Dear all,
We want to control Purchase Order quantity against Purchase Requisition.
We have configured message setting 00 076 as ERROR. when we create Material PR for lets say 100 quantity. When we create single or multiple Material PO against this PR for more than 100 quantity system is giving us error. This is exactly what we needed.
But due to this message setting when we create Service PR and give service quantity lets say 100. and when we create Service PO and give Service quantity 60. First time system is allowing to save the Service PO.
When we create another Service PO with reference to same Service PR system is showing error as we have configured. Even though quantity 40 is still available.
What we want is to have control on quantity of Purchase Order for Material as well as service. Quantity should not be more than PR quantity.
Is there any other way to have such control? please provide other available options to configure.
Regards
Kant

Hi,
06 076 is only for applicable only in case of material.
For Service and material both, use 06 400 as error "Materials/services for requisition & & already ordered with & &"
NOtes 786736
This may help u !
Regards,
Pardeep malik

Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?

Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?

Hi Michael,
You can set the thresholds via an import file. The easiest way to do this (and this goes for all importable data, webapps included, 301 redirects and so on) is this:
1. go into the Admin and create a single item, in you case create a test product and set the thresholds
2. export that data - in your case export the product list
3. take a look at how the data looks like in the export file so you can get an idea of how the format should be like in the import file
Unfortunately you cannot set more than 2 thresholds, that is not possible at the moment.
Thanks,
Mihai

Goods receipt quantity more than po quantity -units

Similar Messages

Maybe you are looking for