Goods Receipt reversal posing for Inbound delivery

Hi Gurus,
There is an interface running which create, IDOC, Inbound delivery, HU and material received (material document created - 521mvt type) to stock.
Now there is some problem in the HU weight and I need to reverse the Material docuement with 522 mvt type.
As the GR is created through VL32n, I can not reverse the GR using MBST or MIGO cancellation. I am also not allowed to reverse through VL09. I am getting error This is not possible with movement type 522.
Kindly inform me if you have any suggestion to reverse this material document.
Best Regards,
Mohan

Hi,
VL09 is the correct transaction.
I doubt if this will work but try looking at theconfig of the 521 and 522 movement types and check the "allowed transactions" see if VL09 is linked to it, if not then link it and try VL09 again.
It is a longshot but VL09 shouldwork (although my HU knowledge is not good).
Steve B

Similar Messages

  • Find a bapi for Creates a Goods Receipt with correspond to Inbound Delivery

    hi expert!
    exist a bapi for tcode:MIGO_GR ( Goods Receipt with correspond to Inbound Delivery)
    i know one bapI  BAPI_GOODSMVT_CREATE can Creates a Goods Receipt,
      but i can't know to use it to Creates a Goods Receipt with correspond to Inbound Delivery.
    or other bapi exist for MIGO_GR?
    Best Regard!

    Hi Vatcan,
    Chek the Inbound Delivery 1st weather you refer the right PO in it
    You can also chek in  PO i
    1 Me23n Go to confirmation tab here you can see the  Inbound delivery  quantity
    2 Chek  which reference document you recived the goods,  (i.e You recived the goods with reference to PO or  Inbound delivery)
    2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
    And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

  • Goods receipt not possible for outbound delivery...error code 4

    hi ,
    i created a stock transfer order.
    an outbound delivery was created.
    pgi was done..
    gr was done against this delivery.
    but this gr was then cancelled.
    now when i am doing gr against this outbound delivery.
    i get this eror message.
    Goods receipt not possible for delivery 1134930096: error code 4
    i have then reversed PGI of this delivery in vl09.
    then did PGI again.
    but still same error message.
    please help.
    regards
    shashank

    Hi,
    When system gave you the message with the error code 4, you can click on the message.
    There may be various reasons for the error of GRn agaist delivery -
    1) GRN already posted against the Delivery
    2) Delivery is deleted
    3) Delivery is currently processed by another user
    System gives you the detailed analysis aling with the codes. You can check what reason is mentioned for reason code 4.
    Regards,
    Prashant

  • Goods Receipt w/ref. to inbound delivery can not be reversed....

    Hello Gurus,
    My clients wants to reverse Goods Receipt document which it was created with reference to an inbound delivery. Previously the inbound delivery was created with reference to a PO, the ID generated several HU and TOs that were confirmed.
    Now he wants to cancel the Goods Receipt posting but the problem is that the quants created in the TOs have changed the storage bin destination, so I really dont know how coudl he handle this process.....indeed he also wants to cancel de ID.....
    What do you think that could be the correct procedure???
    Thanks!!!

    Hi Pablo,
    Yes you are right you can use MIGO to cancel the individual line item however you can do the same in VL09 also by selecting the individual material document
    Please have a look on the below post which was provided by me in one of the earlier thread
    Delivery with multiple line item, reversal required for one line item
    Now you can have a scenario where you are having 4 line item in the delivery and you want to reverse only one, in this scenario you can use the VL09 with material document option, system will display all the possible material document for the IBD reverse the respective Material document as per your requirement and then use the TO view of LT0G to reverse the particular line item

  • Exit or Badi to prevent MIGO Goods Receipt on PO with Inbound Delivery

    Hi,
    I am hoping that someone can provide me with some direction on how to prevent the use of MIGO for GR when the PO being received is (or should be) linked to an inbound delivery.
    For purchase orders with a confirmation control key an inbound delivery is to be created and the goods receipt needs to be done from the inbound delivery. This scenario also includes the case of stock transport orders whereby an inbound delivery is created form the outbound delivery. On the other hand for purchase orders without a confirmation control key no inbound delivery is created and the MIGO transaction is to be used to post the goods receipt.
    Since both processes are possible, I would like to prevent people from posting the GR using MIGO if certain conditions pre-exist.
    Can anyone suggest a means to accomplish this goal? Is there an exit or badi in MIGO that you would suggest using?
    Thanks,
    Paul

    Hi,
    The following user eixts and badis available for migo transaction:
    Enhancement/ Business Add-in            Description                                                                               
    Enhancement                                                                               
    MB_CF001                               
    Customer Function Exit in the Case of Updating a Art. Doc.     
    MBCF0011                               
    Read from RESB and RKPF for print list in  MB26                
    MBCF0010                               
    Customer exit: Create reservation BAPI_RESERVATION_CREATE1     
    MBCF0009                              
    Filling the storage location field                             
    MBCF0007                              
    Customer function exit: Updating a reservation                 
    MBCF0006                              
    Customer function for WBS element                              
    MBCF0005                              
    Article document item for goods receipt/issue slip             
    MBCF0002                               
    Customer function exit: Segment text in article doc. item                                                                               
    Business Add-in                                                                               
    MB_RESERVATION_BADI                    
    MB21/MB22: Check and Complete Dialog Data                      
    MB_QUAN_CHECK_BADI                    
    BAdI: Item Data at Time of Quantity Check                      
    MB_PHYSINV_INTERNAL                    
    Connection: Core Inventory and Retail AddOn                    
    MB_MIGO_ITEM_BADI                      
    BAdI in MIGO for Changing Item Data                            
    MB_MIGO_BADI                           
    BAdI in MIGO for External Detail Subscreens                    
    MB_DOC_BADI_INTERNAL                 
      BAdIs when Creating an Article Document (SAP Internal)         
    MB_DOCUMENT_UPDATE                    
    BADI when updating article document: MSEG and MKPF             
    MB_DOCUMENT_BADI                       
    BAdIs when Creating an Article Document                        
    MB_CIN_MM07MFB7_QTY                    
    Proposal of quantity from Excise invoice in GR                 
    MB_CIN_MM07MFB7                        
    BAdI for India Version exit in include MM07MFB7                
    MB_CIN_LMBMBU04                        
    posting of gr                                                  
    MB_CHECK_LINE_BADI                     
    BAdI: Check Line Before Copying to the Blocking Tables         
    ARC_MM_MATBEL_WRITE                   
    Check Add-On-Specific Data for MM_MATBEL                       
    ARC_MM_MATBEL_CHECK                    
    Check Add-On-Specific Criteria for MM_MATBEL     
    If it is helpful rewards points
    Regards
    Pratap.M

  • Issue in Goods Receipt with respect to Inbound Delivery

    Hi Gurus,
    We have a scenario where goods receipt (Migo) is done based on inbound delivery.
    i have created a PO for 10 Qty..
    i have done inbound delivery for 10 qty
    In actual GR (MIGO) only 8 qty is received and i posted it. whether the actual qty received will be updated in inbound delivery.
    please note GR will also be done in EWM.
    Please let me know if any standard config is required.

    Hi Vatcan,
    Chek the Inbound Delivery 1st weather you refer the right PO in it
    You can also chek in  PO i
    1 Me23n Go to confirmation tab here you can see the  Inbound delivery  quantity
    2 Chek  which reference document you recived the goods,  (i.e You recived the goods with reference to PO or  Inbound delivery)
    2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
    And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

  • Goods Receipt for Inbound Delivery through MIGO

    Hi All,
    Can anyone pl. explain me in steps the process of GR for Inbound Delivery from MIGO transaction.
    Also I need the process of reversing this goods receipt done.
    For certain inbound deliveries a dump occurs in the program SAPLIE01 in 'EQUIPMENT_ADAPT_BUSVIEWS' fn module.
    I need to analyse the reason for the dump. Here is the extract from the dump
    <b>IF WA_EQUI IS INITIAL
      keine Equidaten vorhanden => EXCEPTION
    --->       RAISE ERR_ADAPT_BUSVIEWS . ENDIF.                     </b>                                          
    Advance Thanks

    Hi Sanjay and Srikanth,
    Thank you for the correction. I was just wondering over this number.
    Sanjay, regd the release level, it is 0017 for SAP_APPL.
    In brief, when GR is done for an inbound delivery, a fn moudle equipment_adapt_busviews is called, in which if the equipment data of the material (wa_equi) is initial, it gives dump.
    1. This fn module is called 3 or 4 times while the posting is done through MIGO
    2. In the 4th call, the parameter wa_equi is initial - which gives the dump.
    3. While debugging, when I reach this point,if I restart the debugging, I find that the posting is completed !!!! (so something happening after posting of GR gives the dump)
    4. I have to reverse this GR for replicating the same again.
    Any further clues !!
    Regards
    Aadarsh

  • Post Goods Receipt for Inbound Delivery via IDoc SHPCON (DELVRY03)

    hi all,
    I'm using IDoc SHPCON (Delvry03) for posing goods receipt for inbound delivry.
    Can anyone give a sample IDoc or tell which segments must be filled.
    Thanks!
    Regards,
    Hui

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • Post Goods Receipt for Inbound Delivery using WHSCON IDoc

    Dear All
    Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
    We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
    I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
    We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
    We create a delivery (type NL = replenishment delivery) for this POs
    As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
    At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
    Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
    We dispatched 50 units of a product => QTY:50:12
    The partner received indeed 50 units => QVR:50:66
    Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
    When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
    the goods receipts for the products in the original stock transport order and
    upate the message flow in the delivery
    My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
    In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
    I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
    To make a long story short here are my questions:
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    Does anybody have an example on how to fill the WHSCON IDoc?
    Or is my approach a cul-de-sac ?
    Kind Regards
       Uwe
    PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • Goods Receipt for Inbound Delivery before Transfer Order

    Hello Experts,
    Below is the normal process in case of GR via inbound delivery.
    PO -> Inbound Delivery -> TO -> Confirm TO -> Post Goods Receipt in Delivery.
    My client wants as per the normal Purchase Order cycle as below.
    PO -> Inbound Delivery -> Post goods receipt in Delivery -> TO - > Confirm TO.
    I have found some config for this as per below path.
    Logistics - General -> Handling Unit Management -> Basics -> Delivery -> Define Sequence of Transfer Order - Goods Receipt.
    I have done these settings but still it is not working.
    I have couple of questions here.
    1. Are there some more settings required?
    2. Why SAP has designed this process in such a way for inbound delivery.
    Thanks in advance for your help.
    Navin

    Hi,
    I am working with non HU managed storage location. Can I still use this settings & process for inbound delivery?
    I am stuck with one more question. SAP is not allowing me to create Inbound delivery for QM active materials.
    The message it is saying is ....
    Material CH-1440 1000 cannot be used in inbound delivery because QM is active
    Message no. L9528
    Diagnosis
    QM is active for material CH-1440 in plant 1000. As a result, the material cannot be used in an inbound delivery item because the item is relevant for picking and because WM is active for the item.
    This process is not supported in the current release.
    Procedure
    Execute the putaway using a goods receipt posting with subsequent
    putaway in the Warehouse Management system.
    Can you please help me with this one also?

  • Goods receipt not possible for   delivery 80016425: error code 4   in MIGO

    Hi friends,
    I created STO from ME21N tr.code(document type:UB), then I created outbound delivery from VL10B tr.code based on STO.
    After that, goods issue is made by vl02n.Lastly , when I want to make  a goods receipt based on outbound delivery from MIGO
    (with mvmt type:101),it gives me error about"Goods receipt not possible for   delivery 80016425: error code 4   in MIGO tr.code" .
    Take your opinions

    Hi,
    Error 4 indicates there is/are no delivery item/items.
    Check following options:
    option-1--->Check material number extended to the both plants with storage locations
    option-2--->Check the material received already WRT  the delivery
    option-3---> Check confirmation control key in  material that needed in creation of an inbound delivery to have GR process
    option-4--->Check The latest goods receipt date in STO
    option-5--->Check(done any setting) if any billing to be done after PGI and then can do GR WRT delivery
    Regards,
    Biju K

  • Goods receipt not possible for delivery 800001597: error code 4

    Hi,
    When doing goods recipt for outbound delivery in MIGO, I am getting the below message:
    Goods receipt not possible for delivery 800001597: error code 4
    When going in details of error messgae:
    For error 4 : Check the delivery and its document .
    Document flow is as below:
    Step 1. PO Created
            2. Delivery created with ref to PO
            3.Picking
            4. Shipment Created
            5. Goods Issue complete.
    Now what i have to check.
    Thanks in advance.
    Regards

    Check the link Re: MIGO
    Also check OSS Note 458770 - GR for outbound delivery shipping units with batch split and Note 314765 - M7865 during GR f. delivery w/ default values 102 if it applies to your SAP version.
    Regards

  • Goods receipt not possible for delivery 80172554: error code 8

    Hi all,
    I got this error but the description does not helps to understand the issue.
    Goods receipt not possible for delivery 80172554: error code 8
    Message no. M7865
    Diagnosis
    The goods receipt for the delivery cannot be posted.
    The error according to the error code:
    1. The delivery does not exist.
    2. The delivery type is unknown.
    3. The delivery is not goods issue posted.
    4. There are no delivery items.
    5. The receiving plant could not be determined.
    6. The delivery items have already been goods receipt posted or contain zero quantities.
    7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
    8. It is not currently possible to block the delivery.
    Procedure
    Error code 1      : Check your entry.
    Error code 2,3,4,6: Check the delivery and its document flow.
    Error code 5      : The delivery must be related to a purchase order or
                        the customer must be a retail business.
    Error code 7      : Check the settins for your movement types.
    CD

    Please check this answered link:
    Re: MIGO
    Re: Inter comapny  PO-
    Goods receipt not possible for delivery 800015869: error code 1
    STO Problem while doing GR against outbound delivery
    Edited by: Afshad Irani on Jun 2, 2010 7:13 PM

  • Goods receipt not possible for delivery 800015869: error code 1

    Dear friends,
    I am doing MIGO-GR for outbound delivery, but getting error once inputting outbound delivery no.
    Goods receipt not possible for delivery 800015869: error code 1
    Message no. M7865
    Diagnosis
    The goods receipt for the delivery cannot be posted.
    The error according to the error code:
    1. The delivery does not exist.
    2. The delivery type is unknown.
    3. The delivery is not goods issue posted.
    4. There are no delivery items.
    5. The receiving plant could not be determined.
    6. The delivery items have already been goods receipt posted or contain zero quantities.
    7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
    8. It is not currently possible to block the delivery.
    Procedure
    Error code 1      : Check your entry.
    Error code 2,3,4,6: Check the delivery and its document flow.
    Error code 5      : The delivery must be related to a purchase order or
                        the customer must be a retail business.
    Error code 7      : Check the settins for your movement types.
    Any poniters to check the setting in PO or delivery or any setting in SPRO.
    Regards
    Ashutosh

    Hi Anupam,
    That is the requirement of my scenario
    That is happening in intercompany posting.
    I am explaining to you.
    say total stock for article AR is 1000 ( In DC --A it is 500 and in store B it is 500)
    I have two company codes X and Y
    One DC (A) belongs to X and second store (B) belongs to Y.
    I have stock available for say article ( am working here in IS Retail  instead of material ) in both DC --A and Store --B.
    Now I have created PO thru replenishment planning WRP1 , now in PO supplying plant is DC.
    Now I did delivery thru VL10B and then picking and then PGI.
    Now my stock is reduced in DC by PO quantity created.( let us assume it is 100)
    So now total stock in DC=400
    Now this stock is in transit we can check thru MB5T. so total stock in transit = 100
    Now I have to do GR against delivery , if I will do GR for 100 nos , there will be no stock in transit
    and stock of receivibg store (B) will increase by 100 nos.
    But I am not able to do GR against delivery so I did GR against PO for say 50 nos. In this case stock in store is increase by 50 nos.
    But there is another stock in transit available=50
    Now why GR is not happening against delivery but it is happening against PO???
    Any pointers

  • Goods receipt not possible for delivery 540039784: error code 4

    Dear Friends,
    While making GR against out bound delivery for a STO system throws following error:
    Goods receipt not possible for delivery 540039784: error code 4
    Message no. M7865
    Kindly help me out.
    Ashok

    Hi
    This Error indicates There are No Delivery items.
    Check the delivery and its document flow.
    Check the GR Refernce document being used for MIGO
    Regards
    Anand

Maybe you are looking for