Goods Reciept Label Printing issue
Hello Folks!!
We have created a customized smartform ZDU_GR_LABEL for printing it against the production order with transcation MB31 during goods reciept. Customization settings are done in NACE for application type ME- Inventory management and also condition records is maintained.Printer configuration is also maintained for zebra printer.
Details maintained in NCE
Program : SAPM07DR
Form Routine : ENTRY_ETIE
FORM: MM07ET
The label is not getting printed and also the spool shows blank page.Please suggest the solution
hii,
Program : SAPM07DR
Form Routine : ENTRY_ETIE
PDF\smartforms: ZDU_GR_LABEL
(Not in form it is for SAp scripts)
Also create a customised Z driver program.
regards,
Sri
Similar Messages
-
Automatic Goods Reciept label printing issue
HI All,
we are facing some issues while printing goods receipt label. Please check below steps which we already performed.
1. Basis team has already set up new printer Q534 in SPAD transaction.
2. Then we maintain printer determination parameter with combination of output type/plant 5055 /storage location 0001/usergroup/ device
3. We maintaned condition record through MN14 for th plant 5055.
so when we post goods receipt then it should go for Automatic label printing. In SP01 we are not able to see any request.
Kindly suggesst if any config is missing.
Also suggest in condition record, do we need to maintain anything under the COMMUNICATION tab.
Regards,
SanjayHi Guys,
Today I created one PO in test system and GR posted then I checked Spool request SP01 but due to this GR posted, it showing the spool request only for GR slip but not for label print.
GR slip print showing correctly because in OMJ3 tcode WA condition type maintained for the plant 5055 and Sloc 0001against the printer Q532
Now I maintained label print condition type ZLBL in Tcode OMJ3 for the plant 5055 and Sloc 0001 against the printer Q534 but after GR posting, the lable print spool request did not generate.
In sp01 we can see only GR slip print request for the printer Q532 not for label print
Kindly suggesst how can we determine the printer (spool request generate) for the label print for the printer Q534
Sanjay -
Good Reciepts not printing correctly
Hi All,
We just applied our Service Pack and since then we are having some issue with MIGO, when we try to print the Goods Reciept using MIGO the hard copy comes in with few extra lines. I tried printing the Goods reciept from the client where we didn;t not apply the Service Pack and it's working fine in that system. Initially I thought that it's a GUI issue but apprarently it's not .. I am on 720 patch level 0.
Can you please advise something?
Thanks,
RajatIf this issue did not persist before, and has happened after upgrading through a service pack then please search for appropriate OSS notes.
Regards,
Sanjiv -
Label printing issues in Sapscript
We are struggling with building a new label for a finished good. On previous labels we used barcode BC_CD39. This new label requires a mix of same barcode and 2D barcode. One of the issues is BC_CD39 is it is too big at 13mm. So we want to use CD39__00 which is 5mm. We have gone into SPAD and SE73 and we think we have this set up to work on the two printers involved. We have also followed instructions for 2D in 197177 for adding new small font. We also have a logo for printing. When I print the printout does not have the smaller barcode, any text in smaller font and the logo is missing. I went into the spooler yesterday and these prints are getting an error (unknown print control should be output) that is talked about in note 17559. And when I look at the print preview I have a logo and different size fonts and smaller barcodes showing- basically all the stuff that is missing from the actual print. Has anyone else run into this and how have you resolved this? I am not sure what the spooler does not like. We are using a Printronix T5000e series printer.
The spooler error reads: character converter active when first problem occurred
Data was saved with character set 1100
Data will be converted to character set 9010 (synt = 9010)
and then it gives the OTF error mentioned above.
Our latest attempt is downloading tru fonts and getting them into the printer. Still no success and now the labels are not even printing.
Thanks for any help.
SusanWe continue with not being able to print this label correctly. If I do a screen shot I can see I have varying fonts on the label. But it completely ignores the various fonts on printing.
Our pirnter is a Printronix label printer.
My form is defined as landscape.
I get a spool error when printing that character set 1100 is being converted to character set 9010, which is custom for Printronix.
If we print on legal form vs the label form it prints fine.
We have tried different print drivers but nothng seems to get these fonts out.
We are using 5MM 3by9 barcodes.
This product is about to 'go live' and we really want to print this from SAP vs an external label software program. If we use an external label program separate from SAP it can print perfectly on same label printer.
We welcome any suggestions.
Susan -
Label Printing issues on Crystal Reports Server
I built a label that prints off beautifully on my local machine with Crystal XI installed. However, when I post the label to the reports server, and a user tries to print it off, it prints off two blank labels behind each good label. I have racked my brain on this for days. The printer settings are identical to my local machine. Any idea what might be causing this?
I think the following information might help you
Symptom
A label report was viewed over the web using the Web Component Server, and printed on a label maker printer DYMO 330. The labels were being resized to 8 1/2 x 11 instead of printing the size of the label. Even after selecting the correct size, the labels print one per page, followed by 3 blank labels.
When printing was done through a distributed report or the report designer, the labels printed to the correct size and only printed one label with no blank labels.
What is causing the label report to print incorrectly when printed from the web viewer?
Resolution
Steps to Resolve
1. Open the report in the Crystal Reports 8 designer on the web server.
2. Click on 'File' then click 'Printer Setup'. If a printer is already selected then set it to 'No Printer', click 'OK', then save the report.
3. Click on 'File' then click 'Printer Setup' again. Select the default printer and clear the 'Default Properties' checkbox.
4. Click 'OK' and save the report.
5. Click on Start > Settings > Control Panel > Services and double click 'Seagate Page Server' service. Set this service to run under an 'Administrator' account.
6. Stop and restart the service, and close down all browsers.
The label reports now will print successfully over the web.
Background
Incorrect printing from a web viewer can have several causes, including:
· The report is designed with a designated printer, but the encapsulated page format (EPF) files are being created in 'No Printer' mode.
· The server does not have access to the printer.
· A valid printer is not saved with the report on the server.
· The printer driver is not installed on the server.
Regards,
Raghavendra.G -
Label printing issue with chinese characters (SAP script)
Hi ,
I have a requirement to print chinese characters on label print out.
Here are the steps already tried:
1) Created a new device type which is copy if ASCIIPRI and character set 8400
2) Font ANDALE_S, CNHEI, CNSONG are assigned to device type, same fonts called in SAP script.
3) During the print, it is picking ANDALE_S font(observed in spool RAW data), but preview is good.
4) I put ZPL codes CW1,B:MSUNG.FNTFS in beginning of script and also ^A@N,50,50,B:MSUNG.FNT while prining actual chinese text in SAP script.
5) also tried other device types assigned to printer LZEBU2, LB_ZEB2 etc.,
6) already checked at printer DIMM level, SIMSUN, ANDALE_S fonts are already installed
7) Character set on printer is same as in SAP
So far no option worked, it default to Courier fonts while printing and it results garbage characters.
If anyone has ideas, please advice.
thank you,
AnilHi,,
If the ZPL commands are correct for switching to the printer's internal CHinese font and character set, it may work to add the fonts via SE73 -> Printer Fonts -> ASCIIPRI . In here you need to add the commands in the print control SFxxx for your created font.
Another possibility is to print via windows and device type CNSAPWIN. Here it should not be necessary to add any font.
Regards,
Aidan -
Hi,
I have a zebra printer (ABC_LBL) which is used for GR Label printing.
I have maintained the same printer name in Output type and I am able to generate the output also.But there is lot of over-lapping happening here, I think it is because of some printer settings.Can anyone let me know do we need to maintain any specific printer settings.
Thanks and Regards
Ankit
Edited by: Ankit Patodi on Apr 14, 2009 10:24 AMHi,
Just take take output in any laser print or other printer for the same output,some time if the settings modified means it iwll print like that
Regards
Murugan -
HP LaserJet Pro CP1525nw Color Printer - label print issues
I'm getting great plain paper printing, however, my labels are coming out with sporadic patches of white where there should be color, especially along the edges. Also, the black text is printing light "shadow" text in areas that should be white/unprinted. Can anyone help?
AnnHey,
I see you are having an issue with Air Print on your CP1525nw Color Laserjet Pro. Have you tried a full network power cycle?
Unplug the router and printer while on
Power down the iOS device completely. Check out the following link for how: http://ipod.about.com/od/iphonehowtos/qt/turn_off_iphone.htm
Wait 30 seconds
Power the router up and wait for it to completely initialize before proceeding
Power the printer up and wait for it to completely initialize before proceeding
Power the iOS device back up
It sounds like the network most likely lost communication with the bonjour service of the printer.
If you need to update the firmware of the CP1525nw please click the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86473-9&cc=us&dlc=en&lc=en&...
Let me know how it goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
EHS- WWI Label printing issues with Word 2007
I was wondering if anybody was experiencing issues when printing WWI labels from transaction CG54
when user has Microsoft Word 2007 ? Our users our seeing delays/pausing between labels when they have
Word 2007. We do not see this pause on the users machines that have Word 2003. I did not see any OSS Notes,
does anybody have a solution/work around for this ? Our desktop GUI is at Support Pack 21 and our
server is at Support pack 22. Any ideas ?Hello Carla
no . This problem hasn't been detected yet using our configuration. May be these Notes might help:
Note 907221
Note 1012558
Note 1431414
Note 568302 and Note 1487551. Recent WWI version is WWI SP 23.
With best regards
C.B.
Edited by: Christoph Bergemann on Sep 4, 2010 8:13 PM -
Hi Experts,
I am facing an issue while printing MRP Label ,which i am printing using Smartform,
the font size which i define in Smartstyles is not at all reflected while print preview , in ECC 604 system.
the printer which we are using to print is EPSON LQ2090 Dot Matrix Printer.
please help me solving this issue <removed by moderator>
Regards,
Uday Kiran K....
Edited by: Thomas Zloch on Apr 26, 2011 9:18 PM - priority normalizedHi Uday,
In the smartstyle, there is a folder for character format. Pointing there click in creater new. Now give a charater format name. and in the following screen in FONT tab give the Font Family Name, Font Size and Font Style if any.
Then in the text field in smartfrom give the variable inside <CHARACTER_FORMAT_NAME> &VARIABLE& </CHARACTER_FORMAT_NAME>
Thanks & Regards,
Harish -
My labels start out ok, then by the bottom of the page the addresses are half off the label. Any suggestions?
Hi,
Please do not post same question again and again. What is your printer ? What is the software you are using ? What is the type of label sheet ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Hi Gurus,
I am working on an interface where I will be getting an input file and I need to write a process that allows goods issue and goods reciept. My input file for <b>GI</b> contains the following information
Material No.
Plant
Storage Location
Account Assignment
Batch
Isued Quantity
and for <b>GR</b> its:
Material No.
Plant
Storage Location
Account Assignment
Batch
Reciept Quantity
I have been told that movement type for GR is 121 and for GI is 122
Moreover I will be getting two different files for GR and GI.
now I have a small doubt, I am not getting the movement type in the input file, so I am kind of confused that how would I differentiate whether I need to go for GR or GI when I will get the input file.
Thanks
RajeevThanks for the reply,
Actually what I have been told is that they have given me the two differnt formats of the input file and I have been asked that I need to pull the data from a local file and replicate GR/GI process in inventory management.
Thanks
Rajeev -
Issues with Crystal 2008 Printing to a Zebra Label Printer with SP2
Hi there
We are having issues printing to a Zebra Label Printer using Crystal 2008 SP2.
When you attached a .rpt file to the .NET Application which is accessed via RDP/ICA the reports in Crystal XI worked fine.
Steps we have taken are:
Printing direct from Crystal 2008 Designer to the Zebra Printer works using a Generic Text Driver
Printing direct from Crystal 2008 Designer to the Zebra Printer using a Zebra Universal Print Driver DOES NOT work (we were advised the Universal Print Driver may assist with the issue)
The report when accessed via the .NET Application via RDP/ICA using the Universal Print Driver it doesn't work.
The report when accessed via the .NET Application via RDP/ICA using the Generic Print Driver it doesn't work.
The report when accessed via the .NET Application drectly from Server Console prints fine using Generic Print Driver, but not with RDP/ICA.
Can anyone offer any suggestions to a fix?
Many thanks.Hello,
I'll look at this tomorrow when I get into the office. An I am moving this to the developer forum.
Thank you
Don -
Authoriztion for Goods Issue/Goods Reciept documents
Hi..
I want to authorize the two users who create goods issue/goods reciepts. Each of them should acces only his goods issue/goods reciepts documents
I haver not found Goods issue/Goods reciept document on "Data Ownership Exceptions" window and checked "enabler ownership filteration" as well.
please let me know how to achieve this..
Regards
AkritiData Ownership would only apply to marketing documents. However, Goods Issue/Goods Receipt documents are not parts of marketing documents. Therefore, this function is not yet available. You may use SDK, SP or add-on to achieve your goal. Or post a DRQ here:
/community [original link is broken]
Thanks,
Gordon -
User defined fields in Goods Issue and Goods Reciept
Hello,
I would like to know how to add user defined fields in the Goods Reciept and Goods Issue matrix. These two are not displayed under user defined fields management.
Thanks,
Edited by: Martin Kamau on Apr 15, 2009 5:34 PMMartin,
From within the SAP Business One user interface under Tools > Customization Tools > User-Defined Fields - Management, you need to add to the Marketing Documents > Tile and/or Rows, etc.
Eddy
Maybe you are looking for
-
File Compatibility, Files Created w/Photoshop on Apple Will Not Open on Windows platform
I have created a book in InDesign CS5.5 that contains Photoshop documents created in Photoshop CS5.1 using a Windows 7 professional 64bit computer. These files were subsiquently modified by a Graphic Artist using the same versions of this software ru
-
Conforming to an updated edit.. issues
Hi everyone, I'm experiencing issues when conforming to a new edit. The following message appears: The selected projects can not be conformed. These projects do not appear to have come from the same sequence in Final Cut Pro because the clip metadata
-
I open "iTunes" on my iPhone, then "Tones", then choose the ringtone i like and press "Buy Tone". iTunes asks me, how i would like to use my new tone - i choose "define to contact", then it asks to provide access to Contacts, and I say "Yes". Tone do
-
Need help with Language option!
Can I choose a template or copy an existing form, and translate it into another language? How do I do this? I can't find any help in the FAQs....
-
How to suppress warning about files changed outside teststand
I am doing the following: Updating values in the users file incrementing the change count of the file doing a "SaveFileIfModified" with prompt=false. Then doing a "ReloadFromDisk" How come I keep getting the message: "The file '...\Users.ini' has bee