Google account no longer recognized in any app
My google account is no longer recognized. I can't access the market. When I try it says "You must add an account to the device to continue. Do you want to add one now?" When I press yes, I just get sent back to the home screen. I can't access gmail through the actual gmail app. When I try to open it, I can see it tries to show me a message, but it immediately bumps me back to the home screen. Yet the mail app itself seems to be working perfectly fine. Almost all of my contacts have been deleted. The only ones that show up are ones that didn't for whatever reason sync with my actual google account (even the preinstalled numbers for verizon are gone).
I've tried restarting the phone. Pulled the battery out. I cleared out cached data from the market app. I've tried syncing my google account in various spots (in settings, in the mail app). This phone has been the bane of my existence, to the point that if I can't get this fixed in the next day, I will be returning it.
@gfpumpkins
Its very upsetting to have market errors and a error with your Google account syncing. I want to fix this with your help immediately. Thank you for all the troubleshooting you have already done.
Can you see your contacts on Gmail from a laptop or PC? If its a error that was caused by an application, I would recommend a hard reset. Please make sure your device is backed up prior to resetting. Here's a link for the hard reset.
It may be caused by the market experiencing an error while updating. Several of our customers have downloaded from the browser "market apk " and this has fixed the issue.
Please let me know if you still experience any errors and I'll gladly further troubleshoot with you.
Thank you
Similar Messages
-
I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?
Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314 -
IPad no longer recognized by any computer after 4.2.1 update
Hi,
my iPad is no longer recognized by any computer after the 4.2.1 update. It does not show up in iTunes and this even in recovery mode. When connected to charger it does not show that it would charge (but it does). The iPad is still usable except in the iPod app is says "cancelling sync" and does not show any music.
I already reinstalled iTunes, reinstalled the Apple Mobile Device Service, used different computers with different OS version, but it does not show up, not even in the system profiler (USB tab).
Any idea what I should do? I mean it is quite unlikely that there is a hardware issue as the problems appeared right after the 4.2.1 update (from 4.2).
Thanks in advanceYes I know, I already reset like 100 times. Turned off-on...
I guess a recovery could solve the problem, but how do it if the iPad does not even appear in iTunes. I guess it is somewhat stuck in "cancelling sync" and therefore will not accept an USB connection (the USB port behaves like it is deactivated). -
My HP 5610V all-in-one is no longer recognized by any pc as a working equipment.
My HP Officejet 5610v All-in-One is no longer recognized by any of my pc's. When I plug it in to another pc it says that the device is not recognized or malfunctioning. All the local or off line functions of the printer, such as copy and fax is working just fine, but it is no longer recognized by the pc as a printer or any functioning device. I change the printer cable already and setup the printer to the original factory settings but no change.
I have XP Pro in one of my laptops and Vista on the other. I really don't think this is a PC or operating system issue because both pc's used to recognize this printer but now both of them say that it is a malfunctioning equipment that is connected to the usb input and it is not recognized at all by the pc as to what type of equipment it is and they recognize other printers immediately.
Thanks for trying to help anyways. -
I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll. -
Admin account no longer recognized as admin
My normal administrative account is no longer recognized as an admin account by the OS when it needs permission to unlock a system pref setting or to install a program. Instead, I must enter the root account info to perform these tasks. Yet the Accounts pref pane still shows it as an admin account, as does the data showing up in NetInfo Manager when checking members of the Admin group. There is nothing wrong with the password, since I can still log in with it and use it to wake from sleep. Repairing permissions showed no problems, and keychain repair showed no problems either. Any suggestions would be appreciated.
Use the instructions in this FAQ to add your account to the admin group, and the other groups you removed it from.
(11957) -
Two iPads on same account, I can't delete any apps from old ipad?
I got a new iPad air and have a first gen iPad too. They are both on the same account so when I install apps on the new iPad they automatically show up on the old iPad too. This is actually a good thing because I can have paid apps on both iPads.... The problem is that some of the apps will not install on the old iPad. If I tried to install them directly from the App Store it would not allow it and give me a msg that says I cannot run this app because of the older iOS. But since it is mirroring the new iPad, I have about 15 grayed out icons that are waiting to install. Worse yet, if I press and hold to try and delete them, I get the wiggling icons but no X on any of them... I can't delete the grayed out apps nor can I delete existing installed apps. I have tried a hard reset with no luck. The original PC that I used to manually sync the old iPad with is apart in the attic as we don't use it anymore. Any ideas?
Jimyou need to put your phone in recovery mode (search Google) and restore your device as new. All your data will be lost.
-
ICloud account no longer working in Messages app
About 2 weeks ago, my iCloud account has stopped working in the Messages app (version 7.0.1) on my laptop (MacBook Pro 2011, running the latest Mountain Lion update, 10.8.5). Only this app seems to be affected -- Mail is functioning fine, as is Notes and Calendar. My iPhone and iPod touch also aren't affected.
I was texting one of my friends while multitasking (I think I was working on a story I'm writing) when I realized that I was no longer receiving my text notifications on my computer. Initially I thought it just had logged out or something. I opened messages and tried to log back in to my icloud account, but I got the error message "Could not sign in to iMessage. The server encountered an error processing registration. Please try again later." I tried multiple times that day, and have multiple times since, but still no luck. Finally a day or two ago I thought maybe I just needed to deactivate iCloud on my laptop completely, and then reactivate it. So I tried that, but still I'm getting the error message.
Incidentally, I have AIM enabled on Messages, too, but that account seems to be functioning - it's logged in and messages can be sent/received. Only my iCloud account seems to be failing.
I don't have any outstanding updates in the App Store, and in the meantime I'm able to iMessage friends just fine from my phone, but I kinda miss being able to easily switch apps and type, while I've got my laptop open. Any ideas what the issue might be?Try posting this question over in the OS X Mountain Lion forum. iMessage is not part of iCloud.
-
My wife and I have one Apple ID through which we have individually purchased apps for her iPad and my iPad 2. We both now have individual iCloud accounts, and she now has an iPhone. For business reasons we now have to separate the apps under our individual iCloud accounts, but will maintain a single Apple ID for purchases. How can we separate the apps?
Hi Shadow,
The apps are forever tied to the Apple ID that they were purchased under. Your iCloud accounts are also Apple IDs, so although you can sync the apps to your individual device via iTunes, you will be syncing them to the devices, not to iCloud.
Since you are still purchasing everything under one Apple ID, then I'm presuming that they live in a single iTunes library on your computer or Mac? If that is the case, then you would just want to:
Hook up a device to the Mac or computer
Select the device when it shows up under devices
Once selected, the Device Profile screens display to the right - click on the Apps tab, and select which ones you want on that device.
Also check all the other profile pages to make sure they are set up to sync the things you want to sync to that device.
On the info page, you will see that you can sync Contacts & Calendars via iCloud or via iTunes. If you want a single source for contacts & calendars for both of your devices, sync them via iTunes. If you want your own sets of contacts & calendars, sync them via iCloud.
Do you have iCloud set up on the computer or Mac? If so, which iCloud account are you planning on using?
Some of the decisions you will want to make will depend on how you have your computer or Mac configured in conjunction with iTunes. One Apple ID, but one or two User Accounts for the computer or Mac? iCloud on the computer or Mac? What do you want to share and to not share?
Post back with any questions.
Cheers,
GB -
Account Name Longer Recognized as an Administrator
oh hai
I recently changed my account name, login name, shortname, and home directory name.
Now I cannot sudo since of course I am not in the sudoers file anymore. But more problematic, when I try to change the ownership of any System related directories (like I had to do to change my shortname) I am asked to input a System Administrator's name and password, and no name I input is recognized. I get either "invalid name and password combination" or it tells me to put in a System Administrator's name. I am, or rather was, administrator and sole user of this computer. If I put in my old name, I get the same results as my new name.
This issue is also preventing me from enabling the root account.
I am running 10.4.7 and I do not have the installation disk anymore.
Am I screwed?
Thanks.Hi, and a warm welcome to the forums!
Are you aware of how to properly change Shortnames?
Mac OS X 10.3, 10.4 or later: Return to default desktop, apparent "loss" of home directory...
http://docs.info.apple.com/article.html?artnum=107854
There's another way or 2 to get back if that doesn't help. -
Ssh X11 forwarding takes too long to start any app. remotely
Hi,
I have a bizzare problem with %subject% for some time already.
Affected are all my Arch linux installations (all with: systemd, openbox (without Display Manager), and latest updates):
1. home desktop (core 2 duo, 2.4GHz, 3GB RAM).
2. one testing desktop in virtualbox on the desktop from prev. point.
3. work laptop (Intel Core i5, 4GB RAM).
All of these are connected via cable to the same home network 100MB router (using openwrt on asus wl-500g).
Normal ssh transmissions, like entering commands, or transfer of data via scp (even large amount of data for testing purposes because of this) works quick like expected.
The problem is, that if I try to start app. remotely via ssh X forwarding from and to any of these (affected also bidirectional), it takes always aprox. 2 minutes to start the app.
Afterwards, it works fast and fine.
Doesn't change anything, whether the X server is running on the server's side or not.
Have been testing it with some lightweight apps too, but makes no difference if it's e.g. mousepad, gedit, thunderbird, always the same 2 min. delay at their start.
Also, some time ago, I had an older (more than 10 years) laptop, also with Arch installed, using LXDE, and connected via wifi to this same router, which worked perfectly without any delay. Also the same time ago, I was yet running Ubuntu on the home desktop, when I installed Arch to the virtualbox mentioned in point 2, and the problem was already present on the virtual pc, but not on the Ubuntu or the older laptop with Arch I had before.
Later, when I switched home desktop to Arch (or I got new laptop in the work), the issue appeared instantly on the new Arch installations.
The sshd configuration is the basic from the package, with X forwarding enabled of course, thus no strange changes of mine.
I monitored the ssh communications with tcpdump, not to read the encrypted data itself , but to see whether the data is flowing, and there are flow outages (absolute quiet except of below mentioned exceptions) in the mentioned 2 minutes duration till app. startup:
- after ssh authentication, there is about 1 minute silence, when after this 1st minute some few data is flowing
- next, there is another 1 minute silence, after which the app. finally starts
I've also gathered ssh debugging informations, from both, server (where I'm connecting and trying to start app. remotely) and client, with description when waiting has been detected.
server:
/usr/sbin/sshd -ddd
debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 501
debug2: parse_server_config: config /etc/ssh/sshd_config len 501
debug3: /etc/ssh/sshd_config:15 setting ListenAddress 0.0.0.0
debug3: /etc/ssh/sshd_config:16 setting ListenAddress ::
debug3: /etc/ssh/sshd_config:35 setting LogLevel INFO
debug3: /etc/ssh/sshd_config:42 setting PermitRootLogin no
debug3: /etc/ssh/sshd_config:52 setting AuthorizedKeysFile .ssh/authorized_keys
debug3: /etc/ssh/sshd_config:68 setting PermitEmptyPasswords no
debug3: /etc/ssh/sshd_config:71 setting ChallengeResponseAuthentication no
debug3: /etc/ssh/sshd_config:92 setting UsePAM yes
debug3: /etc/ssh/sshd_config:94 setting AllowAgentForwarding yes
debug3: /etc/ssh/sshd_config:95 setting AllowTcpForwarding yes
debug3: /etc/ssh/sshd_config:97 setting X11Forwarding yes
debug3: /etc/ssh/sshd_config:98 setting X11DisplayOffset 10
debug3: /etc/ssh/sshd_config:99 setting X11UseLocalhost yes
debug3: /etc/ssh/sshd_config:104 setting UsePrivilegeSeparation sandbox
debug3: /etc/ssh/sshd_config:106 setting Compression delayed
debug3: /etc/ssh/sshd_config:109 setting UseDNS no
debug3: /etc/ssh/sshd_config:120 setting Subsystem sftp /usr/lib/ssh/sftp-server
debug1: sshd version OpenSSH_6.1p1
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type RSA
debug1: private host key: #0 type 1 RSA
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type DSA
debug1: private host key: #1 type 2 DSA
debug3: Incorrect RSA1 identifier
debug1: read PEM private key done: type ECDSA
debug1: private host key: #2 type 3 ECDSA
debug1: rexec_argv[0]='/usr/sbin/sshd'
debug1: rexec_argv[1]='-ddd'
debug3: oom_adjust_setup
Set /proc/self/oom_score_adj from 0 to -1000
debug2: fd 3 setting O_NONBLOCK
debug3: sock_set_v6only: set socket 3 IPV6_V6ONLY
debug1: Bind to port 22 on ::.
Server listening on :: port 22.
debug2: fd 4 setting O_NONBLOCK
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
debug3: fd 5 is not O_NONBLOCK
debug1: Server will not fork when running in debugging mode.
debug3: send_rexec_state: entering fd = 8 config len 501
debug3: ssh_msg_send: type 0
debug3: send_rexec_state: done
debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8
debug1: inetd sockets after dupping: 3, 3
Connection from CLIENT_IP port 43333
debug1: Client protocol version 2.0; client software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug2: fd 3 setting O_NONBLOCK
debug3: ssh_sandbox_init: preparing seccomp filter sandbox
debug2: Network child is on pid 6379
debug3: preauth child monitor started
debug3: privsep user:group 99:99 [preauth]
debug1: permanently_set_uid: 99/99 [preauth]
debug3: ssh_sandbox_child: setting PR_SET_NO_NEW_PRIVS [preauth]
debug3: ssh_sandbox_child: attaching seccomp filter program [preauth]
debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 [preauth]
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: none,[email protected] [preauth]
debug2: kex_parse_kexinit: none,[email protected] [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
debug2: kex_parse_kexinit: reserved 0 [preauth]
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 [preauth]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 [preauth]
debug2: kex_parse_kexinit: none,[email protected],zlib [preauth]
debug2: kex_parse_kexinit: none,[email protected],zlib [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: [preauth]
debug2: kex_parse_kexinit: first_kex_follows 0 [preauth]
debug2: kex_parse_kexinit: reserved 0 [preauth]
debug2: mac_setup: found hmac-md5 [preauth]
debug1: kex: client->server aes128-ctr hmac-md5 none [preauth]
debug2: mac_setup: found hmac-md5 [preauth]
debug1: kex: server->client aes128-ctr hmac-md5 none [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug3: mm_key_sign entering [preauth]
debug3: mm_request_send entering: type 4 [preauth]
debug3: mm_key_sign: waiting for MONITOR_ANS_SIGN [preauth]
debug3: mm_request_receive_expect entering: type 5 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 4
debug3: mm_answer_sign
debug3: mm_answer_sign: signature 0x13e3f80(100)
debug3: mm_request_send entering: type 5
debug2: monitor_read: 4 used once, disabling now
debug2: kex_derive_keys [preauth]
debug2: set_newkeys: mode 1 [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug2: set_newkeys: mode 0 [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user USERNAME service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug3: mm_getpwnamallow entering [preauth]
debug3: mm_request_send entering: type 6 [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 6
debug3: mm_answer_pwnamallow
debug2: parse_server_config: config reprocess config len 501
debug3: mm_answer_pwnamallow: sending MONITOR_ANS_PWNAM: 1
debug3: mm_request_send entering: type 7
debug2: monitor_read: 6 used once, disabling now
debug3: mm_getpwnamallow: waiting for MONITOR_ANS_PWNAM [preauth]
debug3: mm_request_receive_expect entering: type 7 [preauth]
debug3: mm_request_receive entering [preauth]
debug2: input_userauth_request: setting up authctxt for USERNAME [preauth]
debug3: mm_start_pam entering [preauth]
debug3: mm_request_send entering: type 45 [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 45
debug1: PAM: initializing for "USERNAME"
debug1: PAM: setting PAM_RHOST to "CLIENT_IP"
debug1: PAM: setting PAM_TTY to "ssh"
debug2: monitor_read: 45 used once, disabling now
debug3: mm_inform_authserv entering [preauth]
debug3: mm_request_send entering: type 3 [preauth]
debug2: input_userauth_request: try method none [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 3
debug3: mm_answer_authserv: service=ssh-connection, style=
debug2: monitor_read: 3 used once, disabling now
debug1: userauth-request for user USERNAME service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug2: input_userauth_request: try method publickey [preauth]
debug1: test whether pkalg/pkblob are acceptable [preauth]
debug3: mm_key_allowed entering [preauth]
debug3: mm_request_send entering: type 20 [preauth]
debug3: mm_key_allowed: waiting for MONITOR_ANS_KEYALLOWED [preauth]
debug3: mm_request_receive_expect entering: type 21 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 20
debug3: mm_answer_keyallowed entering
debug3: mm_answer_keyallowed: key_from_blob: 0x13e1e20
debug1: temporarily_use_uid: 1000/100 (e=0/0)
debug1: trying public key file /home/USERNAME/.ssh/authorized_keys
debug1: Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': No such file or directory
debug1: restore_uid: 0/0
Failed publickey for USERNAME from CLIENT_IP port 43333 ssh2
debug3: mm_answer_keyallowed: key 0x13e1e20 is not allowed
debug3: mm_request_send entering: type 21
debug2: userauth_pubkey: authenticated 0 pkalg ssh-dss [preauth]
debug1: userauth-request for user USERNAME service ssh-connection method password [preauth]
debug1: attempt 2 failures 1 [preauth]
debug2: input_userauth_request: try method password [preauth]
debug3: mm_auth_password entering [preauth]
debug3: mm_request_send entering: type 10 [preauth]
debug3: mm_auth_password: waiting for MONITOR_ANS_AUTHPASSWORD [preauth]
debug3: mm_request_receive_expect entering: type 11 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_request_receive entering
debug3: monitor_read: checking request 10
debug3: PAM: sshpam_passwd_conv called with 1 messages
debug1: PAM: password authentication accepted for USERNAME
debug3: mm_answer_authpassword: sending result 1
debug3: mm_request_send entering: type 11
debug3: mm_request_receive_expect entering: type 46
debug3: mm_request_receive entering
debug1: do_pam_account: called
debug3: PAM: do_pam_account pam_acct_mgmt = 0 (Success)
debug3: mm_request_send entering: type 47
Accepted password for USERNAME from CLIENT_IP port 43333 ssh2
debug3: mm_auth_password: user authenticated [preauth]
debug3: mm_do_pam_account entering [preauth]
debug3: mm_request_send entering: type 46 [preauth]
debug3: mm_request_receive_expect entering: type 47 [preauth]
debug3: mm_request_receive entering [preauth]
debug3: mm_do_pam_account returning 1 [preauth]
debug3: mm_send_keystate: Sending new keys: 0x13e1c40 0x13e34c0 [preauth]
debug3: mm_newkeys_to_blob: converting 0x13e1c40 [preauth]
debug3: mm_newkeys_to_blob: converting 0x13e34c0 [preauth]
debug3: mm_send_keystate: New keys have been sent [preauth]
debug3: mm_send_keystate: Sending compression state [preauth]
debug3: mm_request_send entering: type 24 [preauth]
debug3: mm_send_keystate: Finished sending state [preauth]
debug1: monitor_read_log: child log fd closed
debug1: monitor_child_preauth: USERNAME has been authenticated by privileged process
debug3: mm_get_keystate: Waiting for new keys
debug3: mm_request_receive_expect entering: type 24
debug3: mm_request_receive entering
debug3: mm_newkeys_from_blob: 0x13f3b20(122)
debug2: mac_setup: found hmac-md5
debug3: mm_get_keystate: Waiting for second key
debug3: mm_newkeys_from_blob: 0x13f3b20(122)
debug2: mac_setup: found hmac-md5
debug3: mm_get_keystate: Getting compression state
debug3: mm_get_keystate: Getting Network I/O buffers
debug3: mm_share_sync: Share sync
debug3: mm_share_sync: Share sync end
debug3: ssh_sandbox_parent_finish: finished
debug1: PAM: establishing credentials
debug3: PAM: opening session
User child is on pid 6387
debug1: PAM: establishing credentials
debug1: permanently_set_uid: 1000/100
debug2: set_newkeys: mode 0
debug2: set_newkeys: mode 1
debug1: Entering interactive session for SSH2.
debug2: fd 7 setting O_NONBLOCK
debug2: fd 9 setting O_NONBLOCK
debug1: server_init_dispatch_20
debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768
debug1: input_session_request
debug1: channel 0: new [server-session]
debug2: session_new: allocate (allocated 0 max 10)
debug3: session_unused: session id 0 unused
debug1: session_new: session 0
debug1: session_open: channel 0
debug1: session_open: session 0: link with channel 0
debug1: server_input_channel_open: confirm session
debug1: server_input_global_request: rtype [email protected] want_reply 0
debug1: server_input_channel_req: channel 0 request x11-req reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req x11-req
debug3: sock_set_v6only: set socket 10 IPV6_V6ONLY
debug2: fd 10 setting O_NONBLOCK
debug3: fd 10 is O_NONBLOCK
debug1: channel 1: new [X11 inet listener]
debug2: fd 11 setting O_NONBLOCK
debug3: fd 11 is O_NONBLOCK
debug1: channel 2: new [X11 inet listener]
debug1: server_input_channel_req: channel 0 request exec reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req exec
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: fd 14 setting O_NONBLOCK
debug2: fd 13 setting O_NONBLOCK
debug2: fd 16 setting O_NONBLOCK
debug2: channel 0: read 210 from efd 16
debug2: channel 0: rwin 2097152 elen 210 euse 1
debug2: channel 0: sent ext data 210
debug2: channel 0: read 380 from efd 16
debug2: channel 0: rwin 2096942 elen 380 euse 1
debug2: channel 0: sent ext data 380
debug2: channel 0: read 121 from efd 16
debug2: channel 0: rwin 2096562 elen 121 euse 1
debug2: channel 0: sent ext data 121
### Here started the waiting on the server's side, and continued later till the start of app.:
debug1: X11 connection requested.
debug2: fd 12 setting TCP_NODELAY
debug2: fd 12 setting O_NONBLOCK
debug3: fd 12 is O_NONBLOCK
debug1: channel 3: new [X11 connection from 127.0.0.1 port 46968]
debug2: channel 3: open confirm rwindow 2097152 rmax 16384
debug2: channel 0: read 62 from efd 16
debug2: channel 0: rwin 2096441 elen 62 euse 1
debug2: channel 0: sent ext data 62
debug1: X11 connection requested.
debug2: fd 15 setting TCP_NODELAY
debug2: fd 15 setting O_NONBLOCK
debug3: fd 15 is O_NONBLOCK
debug1: channel 4: new [X11 connection from 127.0.0.1 port 46972]
debug2: channel 4: open confirm rwindow 2097152 rmax 16384
debug2: channel 3: rcvd adjust 51268
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 65536
debug2: channel 3: rcvd adjust 32768
debug2: channel 3: rcvd adjust 147456
debug2: channel 3: rcvd adjust 55788
debug2: channel 3: window 32740 sent adjust 32796
client:
ssh -Xvvv USERNAME@SERVER_IP mousepad
OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to SERVER_IP [SERVER_IP] port 22.
debug1: Connection established.
debug1: identity file /home/USERNAME/.ssh/id_rsa type -1
debug1: identity file /home/USERNAME/.ssh/id_rsa-cert type -1
debug1: identity file /home/USERNAME/.ssh/id_dsa type 2
debug1: identity file /home/USERNAME/.ssh/id_dsa-cert type -1
debug1: identity file /home/USERNAME/.ssh/id_ecdsa type -1
debug1: identity file /home/USERNAME/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "SERVER_IP" from file "/home/USERNAME/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/USERNAME/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA ABC123...
debug3: load_hostkeys: loading entries for host "SERVER_IP" from file "/home/USERNAME/.ssh/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /home/USERNAME/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'SERVER_IP' is known and matches the ECDSA host key.
debug1: Found key in /home/USERNAME/.ssh/known_hosts:4
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/USERNAME/.ssh/id_rsa ((nil))
debug2: key: /home/USERNAME/.ssh/id_dsa (0x)
debug2: key: /home/USERNAME/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/USERNAME/.ssh/id_rsa
debug3: no such identity: /home/USERNAME/.ssh/id_rsa
debug1: Offering DSA public key: /home/USERNAME/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Trying private key: /home/USERNAME/.ssh/id_ecdsa
debug3: no such identity: /home/USERNAME/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
USERNAME@SERVER_IP's password:
debug3: packet_send2: adding 48 (len 68 padlen 12 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to SERVER_IP ([SERVER_IP]:22).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug2: callback start
debug2: x11_get_proto: /usr/bin/xauth -f /tmp/ssh-mHE6faU7YJF2/xauthfile generate :0 MIT-MAGIC-COOKIE-1 untrusted timeout 1200 2>/dev/null
debug2: x11_get_proto: /usr/bin/xauth -f /tmp/ssh-mHE6faU7YJF2/xauthfile list :0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req confirm 1
debug2: fd 3 setting TCP_NODELAY
debug3: packet_set_tos: set IP_TOS 0x10
debug2: client_session2_setup: id 0
debug1: Sending command: mousepad
debug2: channel 0: request exec confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: X11 forwarding request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: exec request accepted on channel 0
### After successful authentication, here above started the first waiting, where after first 1 min. continued with:
debug2: channel 0: rcvd ext data 210
debug2: channel 0: rcvd ext data 380
debug2: channel 0: rcvd ext data 121
debug3: Copy environment: XDG_SESSION_COOKIE=0d937ee20c7e42bdbf828421a30eaa2f-1357144247.348263-1841400888
debug3: Copy environment: XDG_SESSION_ID=5
debug3: Copy environment: XDG_RUNTIME_DIR=/run/user/1000
debug2: channel 0: written 711 to efd 6
### After another 1 min. continued with + started the app.
debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46968
debug2: fd 7 setting O_NONBLOCK
debug3: fd 7 is O_NONBLOCK
debug1: channel 1: new [x11]
debug1: confirm x11
debug2: channel 0: rcvd ext data 62
Xlib: extension "RANDR" missing on display "localhost:10.0".
debug2: channel 0: written 62 to efd 6
debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46972
debug2: fd 8 setting O_NONBLOCK
debug3: fd 8 is O_NONBLOCK
debug1: channel 2: new [x11]
debug1: confirm x11
debug2: channel 1: window 2045884 sent adjust 51268
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 65536
debug2: channel 1: window 2031616 sent adjust 32768
debug2: channel 1: window 1949696 sent adjust 147456
debug2: channel 1: window 2041364 sent adjust 55788
debug2: channel 1: rcvd adjust 32796
debug1: client_input_channel_open: ctype x11 rchan 5 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 46974
debug2: fd 9 setting O_NONBLOCK
debug3: fd 9 is O_NONBLOCK
debug1: channel 3: new [x11]
debug1: confirm x11
debug2: channel 1: rcvd adjust 32800
It's quite strange, as I have no more ideas what to check next.
Any ideas pls?
thx in advance.Have finally found a solution for this problem: http://serverfault.com/questions/490352 … w-to-start
Now the applications do start immediately via SSH X11 forwarding as expected.
The following three lines helped:
ip6tables -A INPUT -i lo -j ACCEPT
ip6tables -A OUTPUT -o lo -j ACCEPT
ip6tables -A FORWARD -i lo -o lo -j ACCEPT
While until now, all ip6 traffic has been forbidden (to drop all ip6 traffic) at the start of the system of course.
Nevertheless, I don't understand it, why the ip6 localhost has to be granted this way even if the /etc/ssh/sshd_config is configured for ip4 only "AddressFamily inet"?
I thought, that this way the sshd will be using ip4 protocol only (including for the X11 forwarding), then why does it still need the ip6? -
Built-in iSight not recognized in any app
Nice to see a service like this . . . at least for me to vent . . .
My built-in camera is not working for any application (PhoneBooth, Skype, iChat) and I've perused the troubleshooting forums for the past hour or so. Tried 1) checking USB in System Profiler 2) zapping PRAM 3) resetting SMC, to no avail. Is it worth looking at the software (i.e. updates, re-installs, etc), or should I just call my Apple store in town tomorrow? Any estimates on cost to fix these built-in cameras? I might just buy and install an external camera if it's too much money to fix the built-in one. Thanks for any and all responses.small_brain wrote:
Nice to see a service like this . . . at least for me to vent . . .
My built-in camera is not working for any application (PhoneBooth, Skype, iChat) and I've perused the troubleshooting forums for the past hour or so. Tried 1) checking USB in System Profiler 2) zapping PRAM 3) resetting SMC, to no avail. Is it worth looking at the software (i.e. updates, re-installs, etc), or should I just call my Apple store in town tomorrow? Any estimates on cost to fix these built-in cameras? I might just buy and install an external camera if it's too much money to fix the built-in one. Thanks for any and all responses.
Welcome to Discussions, small_brain
Use Apple's http://support.apple.com/kb/HT2090 suggestions to troubleshoot and perhaps fix your iSight. If you cannot make iSight work using the other suggestions there, contact Apple or your Apple-Authorized Service Provider for professional help.
Your Apple-Authorized Service Provider can answer your other questions. If your think that cost might be a significant concern, explain that to your AASP at the beginning of your conversation. If an estimating charge is necessary for your problem, the AASP can tell you how much it will be.
After evaluating your problem, your AASP can give you his best estimate and likely provide a maximum expected amount for any needed service. You can then decide whether repairs are economically feasible before the work is actually started.
If the cost is too great and you do not intend to trade Macs, an external camera such as a Mac-compatible, Firewire-connected, camcorder or one of the webcams suggested here are possible alternatives:
http://www.uvccompatiblewebcams.com/
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
Two Google Accounts with Contacts app?
I have a coporate Google Apps account as well as a personal one. I'd like to have address completion available in Mac OS (mail, calendar, etc.) for corporate as well as private addresses. However, as soon as I add a second Google account to the Mac OS Contacts app, the first one disappears and the default account switches back to "local".
Is it possible to use two Google accounts with Mac OS Contacts app?
Well, actually I'm already happy if I can use my private account as the account for storing addresses, etc and only use the corporate Google Apps account as a directory for look ups (read-only).
Thanks for any help!Yes, You can Install a WEB Browser app. I think "Web Lock" is great app. as it has a password option too.
here is the download link for WEB Lock APP
https://itunes.apple.com/us/app/web-lock/id597331151?mt=8 -
Unable to add google account since Mavericks update
Since dowloaing the 10.9.1 update, I have been unable to add or update my google account (including in system preferences, mail app and in the calendar) with error messages such as "unable to sign in at this time" and "a connection error occured". I deleted my google account with the hope of re-adding it error- free, although now I'm unable to even re-add the account.
Anyone got any ideas on how to fix this?Merci, Lionel. Votre suggestion a fonctionné!
...dave -
I cant get a youtube account,,
and the google account doesnt open in the Youtube app.?Hi,
There is so little info in your post it is difficult to say if it is the Web Browser you are using or something about your Google Account.
These Support Communities are for Apple Products and Software.
Whilst many are experienced with other Browsers it is more likely you will get answers on Safari.
Other Browsers may mean you have to go to their Web Sites to find answers.
If the issue is with your Google account you will have to go there.
9:18 PM Friday; June 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Maybe you are looking for
-
How can I post a simple message in the User Forum's page, immediately after logging in ?
I had earlier asked a question re: including Merriam-Webster online dictionary into the list of search engines in the text area to the right of the location bar. I received a very helpful answer from cor-el, using which, I was able to include both th
-
does anyone know of any libraries that generate jsp to pdf (the generated HTML and theres no intermediate XML)
-
Won't create Excell sheet accurately
I have reports done in Excell with 4 sheets as pages. they are all pretty much the same lay-out. All pages show normally when looked at under print preview for Excell but only 2,3,and 4 convert to Adobe properly. (I'm using 6.0 Standard). The bottom
-
Sum of field in different columns according to dates
Hi Gurus I have a table s903 with Type Declaration data: begin of ty_S903 occurs 0, fkdat like s903-fkdat, " billing date pkunag like s903-pkunag," sold
-
Is it free to send and receive texts from another EE customer who is abroad?
is it free to send and receive texts from another EE customer who is abroad?