Google added as Exchange Account (mail, contacts, cal), issues with contact #'s resolving to Names.

Google added as exchange account (mail, contacts, calendar), all works except contact correlation. Meaning somebody calls me, it's in the contact list but does not show name just the #. Same for outbound calls..search contacts, tap #, phone shows I'm dialing # versus contact name. This is completely goofy. I had a previous emplorers Exchange account working perfectly before I had to delete it. I removed all email accounts from iPhone and started fresh with adding Google as Exchange 'type' account.

Ok I fixed this problem. Within Google under contacts I had imported 1,200+ contacts and they all showed up there, on my iPad and iPhone. But on the phone name and # would not correlate. I discovered that by editing a contact (within Google contacts page) it would mark it as 'My Contacts' in addition to being Imported on xx/xx/xx. Once I did this, magically my iphone call log would display the name of the contact I edited/reclassified as 'My Contacts'. So I reclassified all the contacts as 'My Contacts' and now have full functionality. End of **** story and hope this helps somebody else.

Similar Messages

10.6 Server, 10.8 Clients (ML) issues with Contacts & Mail

I'm seeing issues with Mail in ML and contacts and our 10.6 server. All users are on a network home directories and using the Address Book service on the server. Mail and Contacts fail/work intermintently when both of them are running. Stopping and restarting either program may solve the problem.
Users of 10.7 clients see no issues. Only users of 10.8 ML have problems with Mail and Contacts. Its very obvious that Contacts and Mail are having issues with each other. I can remove the contents of the Address Book in the local user's library and and relaunch Contacts to run with out problems. As soon as you start Mail problems arise quickly.
While Mail is accessing the address database it will demonstrate long delays.
Any direction or help is much appreciated!

This is a known bug of ML. The operating system is not compatible with AFP home directories. You will notice that FaceTime won't work either. In addition, there are sandbox problems, preferences problems and performance issues.
In my experience, the only possible workaround is to convert all forks and Extended Attributes in the home directories to AppleDouble files and then switch from AFP to NFS. This can result in Spotlight issues, but otherwise, all applications will work fine and much faster.

My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?

My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?

Apple is not here. Contact Apple to resolve your issue:
iTunes Support WorldWide
or
iTunes Support by eMail ww
Cheers,
GB

Having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??

having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??

Hi
in this scenarion control is not going inside the condition
if (vo.getRowCount() == 0) and therefore VO is not getting initialized
why u are counting the row of VO to initialize the VO ,if possible pls remove this condition check ,problem will be solved .pls let me know in case of any issues.
thanx
Pratap

Mail quit when adding an exchange account

I can't configure an exchange account on 10.9.4, Mail quit everytime.
Same thing when using the internet account system preference.
A message appears about a sub-window preference problem.
I've added this account on 10.8.4 and on my iPad without any problem.

Mail.app crashes while setting up an Exchange Account

Mail is running slow after adding an Exchange account

I recently added an Exchange 2007 account to Mail in addition to 2 other accounts; MobileMe and Gmail. Since then, Mail has been very slow to respond to all interaction. While in the middle of typing, it will pause and then catch up to all my keystrokes. Clicking on a message takes a few seconds to get any response as well. This all goes for any email account, Exchange, Gmail, MobileMe.
I have tried rebuilding the mailboxes. Not sure what else I can try. Is this a common occurrence? Does is matter much that I have over 24,000 messages?

Seems like this process worked out. I copied over the Mail folder in Library >Application Support, replaced Mail in Library and com.apple.mail.plist in Preferences. Feels much better <3
I'm thinking Mail just had enough after years of adding and deleting several email accounts. I also think Apple had changed the manner in which data is stored for Mail. The folder structures and file locations don't appear to be the same in the two user accounts.

Adding additional Exchange account

Hey guys,
im experiencing a weird issue with Exchange and Outlook. I spent too much time on it and need a fresh view^^
We are running an Exchange 2007 sp3 at a customers site and they always add additional mailboxes in outlook via control panel\mail.
Evertyhing went fine for years but since a few weeks some accounts cannot be added anymore. Most accounts are working as intended but some accounts are causing troubles. I can add the account but if i want to approve the window doesnt close by pressing the
"ok" button. The only way to close the window is to hit "cancel". Of course the mailbox won´t show up in the additional mailboxes. There are no entries in the eventlogs at all.
I tried to grant full access->no difference
I tried different clients (Outlook 2k3, 2k7, 2010)->same issue
I tried TS sessions -> same
I never experienced this and can´t find anything useful on the inet but maybe someone has a hint for further troubleshooting..
Thx in advance and if u need more detailed information just let me know.
Greets,
Daniel

Best bet would probably be to pose the question in the Exchange/Outlook client forums
Exchange Previous Versions - Outlook, OWA, POP, and IMAP Clients
http://social.technet.microsoft.com/Forums/en-US/exchangesvrclientslegacy/threads
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

"The Connection to Microsoft Exchange is unavailable" when adding second Exchange account to Outlook 2013

I have a problem that I've found to be typical, just haven't found anything that describes my exact problem.
I'm having trouble adding a second Exchange 2010 server account to Outlook 2013 in one of the computers of the domain. Outlook 2013 will complain with "The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete
this action".
I've Googled and found many threads with the same error... however most of those seem to be either a problem with the server, or the Global Catalog in Active Directory, or the "connection method" (I've tried all found solutions to no avail).
This is not the case, since the first account is added with absolutely no problem. It can send and receive and I can delete the outlook profile and recreate it and it'll give no problems. I have this problem only when adding a second account.
This is a fresh Windows 8.1 install with an up-to-date Outlook 2013. I have other computers in the same domain and network, with the same setup (Win 8.1 + Outlook 2013) configured with two exchange accounts with no problem.
There are no connectivity problems, I can access that same account through OWA and in other computers on the network... the Global Catalog seems to be fine (shows two active DCs, which is correct).
I've tried deleting and recreating the outlook profiles, repairing the outlook installation, even deleting all outlook files in AppData and letting it recreate them, with no success.
Any hints of what could be going on?
Before I speak, I have something important to say.

Hi Javier,
Thank you for the update.
I have tested on my lab and get following result.
Lab: Exchange 2010, CAS Array (CAS01+CAS02), MBX01, DC
Type Server Field
Check name result
Changed Server Field
CAS01.domain.com
Yes
CASArray.domain.com
CASArray.domain.com
Yes
CASArray.domain.com
DC.domain.com
Yes
CASArray.domain.com
MBX01.domain.com
No
"The Connection to Microsoft Exchange is unavailable"
Based on my knowledge, the reason why inputing DC FQDN in the Server Field fixes this issue is that Outlook performs AD Lookup and finds the account configuration from AD, then back the CAS Array FQDN in the Server Field instead of DC FQDN.
Exchange 2010 is different from Exchange 2013, if you are using Exchange 2013, we need to input MailboxServerGUID.domain.com into Server Field.
If there is anything I’ve misunderstood, please don’t hesitate to let me know.
Thanks,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How do I delete an exchange account without losing my calendar and contacts?

I just switched jobs and kept all of my personal appointments and contacts in my Outlook and iPhone. I disabled the email from my previous employer but my iPhone isn't syncing my calendar and contacts with my new work email account. When i go to delete the old email account it tells me it will also delete the calendar and contacts. is there anyway to delete the exchange email accoumt but keep the calendar & contacts???

We have no way of knowing what format, if any, they would use to send it to you.
Honestly, if you're really hoping they will do so, I think you shouldn't hold your breath... The odds are almost infinitesimal that they would do so. Everything on the server is company property. IT would probably laugh hysterically at any request to pull data out of Exchange to send to a former employee.
I'm not trying to be mean, it's just the truth. If there's no court order, it's not leaving the network. At all...
Besides, if you were not an uber-important muckity-muck, they've probably deleted your account already, which means contacts, calenders, and e-mail are already gone. They won't resort to pulling something like this from a backup.

Second Exchange account mail stuck in outbox

Hello Everyone,
I have a strange issue. Nor me or my colleagues are able to wrap our heads around it.
We have an exchange account for our Value Added Services (VAS). I've added this mail account as a second exchange account to the outlook 2013 profile for the employees. However the problem is that all mails they sent are stuck in the outbox. And this happens
only for the VAS mailbox.
1 User however doesn't face this issue, when that user sends a mail it is directly sent to the person. That user is currently responsible for cleaning up the outbox.
The mail setup is as follows:
1. Personal Mailbox - Exchange
2. VAS Mailbox - Exchange
3. QA mailbox - Exchange
4. P&G mailbox - Second mailbox (read only access)
They all work fine except the VAS mailbox.
Other relevant information:
They connect to our RDS (SRV 2012) farm and start Outlook 2013 trough remoteapp.
Their PC is running W7
We are using Exchange 2010 with the latest updates.
Any clues/ideas as why this could be happening? And why only the VAS mailbox has that issue?
In my testing i once setup the same mailbox structure locally, and this setup worked.
Thanks in advance.
Kind Regards,
Niek

Hi,
I recommend you try to use OWA to check if there is the same issue.
Open another user's mailbox or a resource mailbox from Outlook Web App
You must have Full Access permission for the mailbox that you want to open to perform this procedure.
Sign in to Outlook Web App.
At the top of the Outlook Web App window, click the drop-down arrow next to your mailbox name, and then click the
Open Other Mailbox window.
Enter the name of the mailbox that you want to open, and then click Open.
Thanks.
Niko Cheng
TechNet Community Support

Adding Microsoft Exchange account to Iphone

I ahve been trying to setup a Microsoft Exchange account on mu Iphone so i can receive work emails, when i put the server details in i get the " failed" error message. I have taken the server details from my desktop outlook. Any ideas?

Has your IT department done what they HAVE to do to allow it to work. They have to have things setup on the mail server to allow such access.

Adding new Exchange account disables camera

Is there some settings on Exchange server, that need to be configured that I will get my camera functions back. I tested to remove the account and the camera functions came back and if I add the Exchange account again, camera will be disabled? Or is this some kind of bug in Iphone IOS?

Hi,
your exchange administrator can configure and enforce configuration policies such as disabling camera, disabling roaming, forcing passwords, etc. This seems to be the case here. Talk to him if he did.

Adding another exchange account Outlook 2013 Pro Plus for terminal Server users

Really hoping someone can offer some advice on this one as I have wasted far to many cycles trying to figure this out.
Company I work for recent purchased another company and we are in the process of bringing them into our network. They currently run a a 2008 R2 terminal server where all users connect to for there day to day work. A number of applications
are installed including Office 2013.
All users have Outlook 2013 configured to access their exchange server for email and this works fine.
The first step in bringing them into our fold is to add an email account for Our Exchange server without removing their existing exchange configuration or Outlook Profile. So the one profile will have both exchange accounts listed and they can
continue to get email from their server but as well email from our domain.
I created a MSP file and tested pushing this out using PDQ Deploy to a few workstations here in our office and it works fine. I then started to work on deploying in their environment. PDQ Deploy will not work as they are all terminal Services
Clients. So I tried to push out via GPO. I created the GPO Initially wanting to use a package and apply that GPO to an AD group. However it will not let me deploy a MST as a package. So I then tried moving it to a script that would
run at logon. That too is not working.
I know I could enter install mode then run the MSIEXEC.EXE \config.MSP but that takes away the ability to control the role out.
Any other ideas on how to get this done.

Using the MSPfile method would require the logged-on user to have the necessary Windows permissions to run setup.exe, and on an RDS/TS Session Host, that's not likely to be available. (since it's not a great idea to give end-users those permissions on a
shared system like RDS/TS)
But you might be able to do it with a PRF file and an Outlook launch command, like this?
http://technet.microsoft.com/en-us/library/cc179062(v=office.15).aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Exchange E-mail Sub-folder Issue

I was able to set-up my mailbox and was able to sync everything successfully but the sub-folders were not copied. I have checked it personally from the MORE FOLDERS field but what I have in the Exchange Account was not copied. What do I need to do? Anyone out there? That's the only thing I need and everything will be perfect.

delete the account and re-enter it.

Issues with Contacts on Z10

Hi everyone,
I have some headaches with the Contacts function on my Z10. Some useful advice on how to resolve these would be greatly appreciated:
(1) Some of my contacts repeat themselves massively and at random within my Contacts list. For example, I added my mother to my contact list recently, and yesterday her name was repeated on the list 45 times. This happens very frequently - it happens at random, and can involve any of my contacts. I generally see between 24 and 55 repeats for each contact. It does not matter whether these people have one or more Contact types (e.g. phone, facebook etc), or when / how they were added. Deleting all of the repeats is not always the answer - apart from being extremely tedious to do, the repetition often just recurs at some point in the future (for some contacts it is immediate, for others it can happen again maybe 2 weeks into the future) This is a huge nuisance, since I often have to scroll through hundreds of repeats to find a specific contact (and the further down the alphabet someone is, the more people and therefore repeats I have to wade through to get to them).
(2) My social media contacts do not update on my phone regularly, regardless of wifi / data / cell coverage. For example, my brother is linked with me on facebook, but his fb account does not appear under Contacts, not even within the specific facebook contacts list, and never has (though if I open the facebook app he does show up as a friend). This is the case for several of my fb connections This also happens to other social media accounts: with LinkedIn and Twitter not all of my connections show up in my Z10 Contacts. Also, with those social media contacts that do show up, their specific avatar is often absent in the "Contacts" list. e,g, under my Twitter contacts list, the avatar only appears for around 50% of them (though in the Twitter app all my connections show up and all have an avatar).
I have all of the application permissions set appropriately (to share contact info etc). I am using the latest software version as of today. All apps are up to date according to Blackberry World.
Any ideas on how to fix these two bugs?
Thanks!
MP
I want to have my Z10's babies.

Hmmm...... The lack of support on ths Support Forum is somewhat disheartening....
Anyone able to offer ANY advice?
I want to have my Z10's babies.

Google added as Exchange Account (mail, contacts, cal), issues with contact #'s resolving to Names.

Similar Messages

Maybe you are looking for